Related
Install Drivers:
Download required files HERE
1: Plug in Aria with supplied data cable to install standard drivers
2: Install HTC Sync (we only need this to get appropriate .adb drivers)
3: Install H Boot Driver - Detailed Guide HERE
a: Power down Aria
b: Hold Volume Down button and press Power (this brings you to bootloader)
c: Wait for SD Card diagnostic (about twenty seconds)
d: Plug in Data cable - at this point Windows will say driver didnt install properly
e: Navigate to Device Manager and update driver for Android 1.0
f: Select "Browse Computer for Driver" and open "Android USB Driver" folder and click next
You now have all the Necessary drivers for your new Android!!
Rooting Your Phone
Credit goes to all the great devs at XDA Developers, including Attn1 and shad0wf0x for their great work
With all the Drivers installed you can now Root the phone!!
1: Go into Menu/Settings/Applications/Development and check the box for "USB Debugging"
2: Plug in phone and choose Charge Only, check box for "Dont ask again" and DONE
3: Download and Run unrEVOked Recovery Tool as Administrator(Windows users)
(as per unrEVOked instructions uninstall any s/w that communicates with the phone(ie: HTC Sync, Doubletwist, etc.)
---Follow any on-screen instructions
**It may take a few tries(unrEVOked hates Windows)
**if all else fails, try shad0wf0xs' Ubuntu Live CD method HERE
Congrats!! you have Rooted your phone
Un-Rooting(Restore to factory)
All drivers from above must be installed
1: Official ATT 2.2 Update(NOW Rootable!!! Click ME) or ATT 2.1 Update Download
2: Make sure USB Debugging is checked in Applications/Development(if fail, then uncheck debugging)
3: Run Aria Shipping ROM.exe as Administrator
---Follow on screen instructions, may take up to ten minutes
Install Custom ROM's
Once youre Rooted you can install custom ROM's from Clockwork Recovery;
1: Copy a custom ROM to the SD card
2: Power down phone
3: Hold Volume down key and press Power to enter bootloader mode
4: After diagnostics run, choose "Recovery" from the list and press power button to select it
5: In Recovery menu choose "install zip from SD card"
6: now select "Choose zip from SD card"
7: navigate to the custom ROM and install
**NOTE: Before flashing a custom ROM it is highly recommended you Wipe Data/Factory Reset in Recovery first
it is also good practice to make a Nandroid backup before flashing any custom ROM
Install Custom Font
Credit goes to churapa. Nice work Bro!! Original Guide HERE
**ROOT Is Required for this
**ALWAYS make a Nandroid Backup before attempting any Mods
-Things you will need:
-True Type Fonts(both Normal and Bold .ttf)
-ADB Tool and knowlege of use
-Required Drivers for proper communication between PC and Android
1: Copy both fonts (normal and bold) into folder named Androidfonts
2: Rename fonts to DroidSans and DroidSans-Bold
3: With the phone off Enter Recovery mode by holding Volume Down key and press Power, select Recovery from the list
4: Once in Clockwork Recovery choose "Partitions" and select "mount system"
5: Connect Phone using Data Cable and run ADB Tools in CMD (c:\Android\Tools)
6: now in CMD window enter the following command:
adb push c:\androidfonts\DroidSans.ttf /system/fonts/DroidSans.ttf ENTER
adb push c:\androidfonts\DroidSans-Bold.ttf /system/fonts/DroidSans-Bold.ttf ENTER
7: Now exit CMD, unmount phone in Partitions menu, Go Back, Reboot Phone, Disconnect USB cable
Enjoy your new font!!
NOTE: Respectively you can backup your current fonts by entering the following in ADB:
adb pull /system/fonts/DroidSans.ttf c:\androidfonts\backup
adb pull /system/fonts/DroidSans-Bold.ttf c:\androidfonts\backup
How to Sideload 3rd Party Apps:
(Rooting NOT required for this)
Download SDK Tool HERE
1: Un-RAR Android folder to root directory on PC (ie: C:\ )
2: Open CMD Prompt and type CD\ and hit Enter
3: Now type cd\android\tools Enter
4: Plug in Data cable and choose "Charge Only" on phone (always choose this)
5: Now in CMD prompt enter this command: adb install barcodescanner3.4.apk and press Enter
The SDK tool should install the Barcode Scanner app on the phone. Yay!! Success!!
**You can use this method to install .apk downloads onto the phone. For this demo i had already inserted
the Barcode Scanner app into SDK tools folder. the actual command should read as follows:
adb install c:\path to .apk file (ie: adb install c:\apps\filename.apk)
**I chose this app because you can use it to install other apps by scanning the barcode
found on many HTC App sites.
How to apply ringtones over 300kb limit:
Short story first
I wanted a nice free app to manage files, so i installed Astro File Manager using Barcode app from above.
While moving some files around i discovered the option to set mp3's to ringtone... and it worked!!
This is good because i was not happy to see there was a 300kb limit to ringtones. There may be another
or better way, but this is how i did it
1: Go to Astro app website HERE
2: Scan the Barcode with Barcode scanner app to install Astro Direct link HERE
3: Open Astro, navigate to SD Card\Mobile\Music
4: find the music file you want set to ringtone, Hold on it until menu pops up
5: Select "Music Options", select "Apply as Ringtone"
or if you dont wanna go through all that hassle, install Rings Extended App. Direct Download HERE
How to remove unwanted Stock Apps using SDK:
1: Once your phone has been rooted with Clockwork, boot into Recovery(hold volume down/press power)
2: Open CMD prompt, get to the "android\tools" directory
3: In recovery window highlight "Mount System"
4: Plug in data cable, in CMD type adb remount
5: Now enter adb shell
*you can view the list of apps stored in the phone by entering ls
6: To remove an app enter the following: rm whateverapp.apk, then enter rm whateverapp.odex
(example: rm HtcFacebook.apk ENTER then rm HtcFacebook.odex ENTER)
7: Type ls again to confirn they have been removed, reboot phone.
*NOTE: you may get 0.0dip listed in Widgets menu. simply go into Manage Apps and locate HTC Sense. Open it and "clear data". your display settings will be reset to factory, but it gets rid of the false data.
Stay tuned!! More to come
Nice tut I could easily follow it
Sent from my Liberty using XDA App
Nice post man... way overdue. Hopefully the mods will sticky it and head off a lot of frustrated searches! =)
Nice guide man...you should sticky this and continue to add stuff to it.
works on htc gratia a6380 with hboot 1.00 ? ? ?
thanks
kiko85 said:
works on htc gratia a6380 with hboot 1.00 ? ? ?
thanks
Click to expand...
Click to collapse
Sorry, there has not been any procedure documented for rooting the Gratia with hboot 1.00. If you search this forum you will find some posts and references for things to try, but nothing concrete has been published yet.
Really good post. Very helpful
Sent from my HTC Liberty using Tapatalk
happy you guys like it. the idea is to be very simple and straight forward.
most of the info comes from XDA guides here. i hope an Admin will sticky this so it will be handy for others to use
i recommend to add the guide to Changing the default font of your Aria
http://forum.xda-developers.com/showthread.php?t=869302
Well, that was quick and easy. Thanks!
Um Im sorda nooby at this but what is "Cmd"?
Sent from my Liberty using XDA App
Javi97100 said:
Um Im sorda nooby at this but what is "Cmd"?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
CMD = command
CMD is the command you type into run (Start - Run) to open a command prompt.
Javi97100 said:
Um Im sorda nooby at this but what is "Cmd"?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
If you are using Windows Vista or Windows 7, this is the black command window that allows you to enter commands such as "COPY", "DIR", "XCOPY", etc.
Cool can I get a link to download and install this?
Sent from my Liberty using XDA App
Oops never mind its on the first page
Sent from my Liberty using XDA App
kevina90 said:
i recommend to add the guide to Changing the default font of your Aria
http://forum.xda-developers.com/showthread.php?t=869302
Click to expand...
Click to collapse
done Bro, added a revised version to the main guide
tested it out on my Aria first, everything worked perfectly.
Hey Zed,
You might want to add to the Font section that you can change your LockScreen font using exactly the same method, but the font for the LockScreen is named Clockopia.ttf -- I'm sure anyone who changes their fonts will want that one changed too.
Also, on the pull command to back up your fonts, you need to add a \ after backup. I did it your way and it wrote the fonts into a file called backup. Then each time I entered it again to back up another font, it overwrote the previous one. Maybe the pull commands should also be moved up into the actual instructions instead of a footnote too, in case someone doesn't read all the way through before starting the process. It will be too late if they have already followed the instructions in their current form.
These are just suggestions, not criticism. Love the thread, thanks a lot for creating and updating it!
Thank you so much for this thread. It made rooting my Aria and putting on the latest liberated froyo ROM super easy. I was a root/custom rom virgin before yesterday!
I'd also add a rom list so people can stay updated.
911jason said:
Hey Zed,
You might want to add to the Font section that you can change your LockScreen font using exactly the same method, but the font for the LockScreen is named Clockopia.ttf -- I'm sure anyone who changes their fonts will want that one changed too.
Also, on the pull command to back up your fonts, you need to add a \ after backup. I did it your way and it wrote the fonts into a file called backup. Then each time I entered it again to back up another font, it overwrote the previous one. Maybe the pull commands should also be moved up into the actual instructions instead of a footnote too, in case someone doesn't read all the way through before starting the process. It will be too late if they have already followed the instructions in their current form.
These are just suggestions, not criticism. Love the thread, thanks a lot for creating and updating it!
Click to expand...
Click to collapse
all suggestions are appeciated. good thoughts bro, soon as i have time it will be done
UPDATES STOPPED: MORE IN-DEPTH THREAD POSTED OVER IN DEVELOPMENT FORUM WITH UPDATED INFORMATION.
http://forum.xda-developers.com/showthread.php?t=1275031
There have been a number of threads regarding working with the Sprint tablet. Due to the lack of support for it, I've complied various items from all across the information tubes to help your get the full use of your Sprint tablet.
I've compiled the instructions from various sources across the internet. If I've failed to reference an item, let me know and I'll correct it.
Something to keep in mind - Heimdall and Odin use different drivers. You WILL NEED to swap between them each time you swap programs. It's unfortunate, but it's necessary.
Flash back to stock (EA24) with Odin
1) Download the files from here
2) Open Odin, and select PDA
3) Choose the appropriate .tar file.
4) Make sure repartition is UNCHECKED!
5) Press start.
6) When the process is finished, the Odin program will say Pass, then Reset.
Install Gingerbread on your Tab
1) Download this file
2) Rename it to update
3) Place it on the root of your SD Card (not in a folder)
4) Boot into recovery and choose "apply update.zip"
Install Rooted Gingerbread on your Tab
1) Download the rooted GB file.
2) Open Odin, and select PDA
3) Choose the appropriate .tar file.
4) Make sure repartition is UNCHECKED!
5) Press start.
6) When the process is finished, the Odin program will say Pass, then Reset.
Root your Sprint Galaxy Tab on FROYO
1) Download SuperOneClick
2) Enable USB Debugging
3) Connect your Tab to the PC
4) Run SuperOneClick
5) Select Root
6) You're rooted!
If you're on Gingerbread, see this thread
Heimdall (needed to flash kernel with CWM)
1) Download Heimdall and unzip
2) Download Microsoft C++ 2010 Redistributable Package
3) Put the Tab in download mode (Vol Down + Power)
4) Connect it to your PC
5) Navigate to your Heimdall folder and run zadig.exe
6) Choose Options>List all devices>Samsung USB Composite Device
7) You'll receive a prompt about the driver, accept to install.
Kernel with CWM Recovery for FROYO
1) Download the zip file here
2) Unzip the file. You will need the file named zimage only.
3) Open Heimdall Frontend
4) Select Browse under Kernel and navigate to the file you downloaded in step 1 and select it
5) Press Start
6) The Tab will reboot, but will freeze on the Samsung logo. Turn it off and boot into recovery (Vol Up + Power)
7) CWM Recovery will attempt to back your tab up, but will fail. Don't fret.
8) Do a factory reset in CWM Recovery and reboot
9) You'll freeze on the Samsung logo again Turn it off and boot into recovery.
10) CWM Recovery will back your Tab up successfully.
11) You now have a CWM backup. Reboot.
12) Your auto rotate is broken.
13) Download the rotation file
14) Put it in /system/lib/hw and change the permissions to match the other items.
Heimdall/CWM instructions compiled and cleaned up from here
Flashing ROMs
1) Keep in mind that the dev may suggest a specific kernel. See kernel instructions (step 1-5 above)
2) Put the ROM .zip file on the root of your SD Card
3) Choose install .zip from SD Card in CWM Recovery
4) Select the ROM .zip file
ROMs for the Sprint Galaxy Tab
1) Honeycomb - in early stages (Dev - spacemoose)
2) Better than Life - FROYO (Dev - oldmacnut)
3) Future Echoes - GB - (Dev - oldmacnut)
4) MIUI Port - (Dev - oldmacnut)
Finally, each of these steps involves the potential of rendering your device useless. Take care with each step. If you're not 100% comfortable with the process, post your questions. Hopefully, other Sprint owners will take note of the thread and use it.
I rooted a couple weeks ago and finally flashed cwm the other day, i wish this had been posted then! Nice job.
question, when i install cwm when i turn on usb mode it shows up as a cd rom on my pc, is that normal?
cmlucht said:
question, when i install cwm when i turn on usb mode it shows up as a cd rom on my pc, is that normal?
Click to expand...
Click to collapse
From what i've read, that is a known side effect, it happened to me too. Also my camera and screen auto rotation are broken. I know there's a solution to the screen rotation issue, but still looking for the solutions for the other two issues.
l8agin said:
From what i've read, that is a known side effect, it happened to me too. Also my camera and screen auto rotation are broken. I know there's a solution to the screen rotation issue, but still looking for the solutions for the other two issues.
Click to expand...
Click to collapse
I have the rotation sensor file. Ill post it when I get home tonight.
Sent from my SPH-P100 using XDA App
^ Thanks, do you have any ideas about the camera and cd rom issue? Would a custom rom or kernal fix those issues?
l8agin said:
^ Thanks, do you have any ideas about the camera and cd rom issue? Would a custom rom or kernal fix those issues?
Click to expand...
Click to collapse
I don't know about the camera, because I never use mine. Ill try to do some research on it.
If I remember correctly, it seems that spacemoose1 had a fix for the cd rom issue. Might wanna try posting in that thread. If you get an answer, bring it back over here and ill include it in the first post.
Sent from my DROID Pro using XDA App
Rotation file
http://www.megaupload.com/?d=CMZV7A9Y
Put it in /system/lib/hw and change the permissions to match the other items.
Sent from my SPH-P100 using XDA App
mounting the sd card
Yes I can confirm that spacemoose had a fix for the mounting of the sd card instead of showing up as a cdrom. I use it. I'll post it. Thanks spacemoose1!!!
Perform the following while tab is connected to pc via usb
1) open cmd prompt
2) cd to "adb.exe" directory (usually the android sdk tools directory)
3) adb shell
4) mount -t vfat /dev/block/mmcblk1p1 /mnt/sdcard
5) echo /dev/block/mmcblkp1 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
Thanks, I gotta figure out how to do this.
I'm from Vietnam and I cant download the KhasMek rom via the host gunsforgeeks.com.
Could you guys please re-upload for me these rom [link belowed] on another hosts such as megaupload, duckload, mediafire ...
Thank you very much
Code:
1. KleanMod
http://gunsforgeeks.com/Tab/roms/KhasMek.DJ11.KleanMod.v3.zip
2.Voodoo plus
Hemidall
http://gunsforgeeks.com/Tab/kernel/KhasMek.Voodoo.plus.CDMA.Tab.v4.OC.zImage
http://www.gunsforgeeks.com/Tab/addons/VoltageControl-gt.apk
Odin
http://gunsforgeeks.com/Tab/kernel/KhasMek.Voodoo.plus.CDMA.Tab.v4.OC.tar
http://www.gunsforgeeks.com/Tab/addons/VoltageControl-gt.zip
gsu_golfer said:
Rotation file
http://www.megaupload.com/?d=CMZV7A9Y
Put it in /system/lib/hw and change the permissions to match the other items.
Sent from my SPH-P100 using XDA App
Click to expand...
Click to collapse
I finally fixed the rotation issue, now working on the cd rom issue. Thanks
USB connection appears in CD-rom
same problem with me
my camera also ran out of work
How do I revert to the stock recovery and get rid of this CWM?
prezmater said:
How do I revert to the stock recovery and get rid of this CWM?
Click to expand...
Click to collapse
Just out of curiosity, why do you want to do it?
Reflash the stock kernel.
Thanks so much for this topic. A lot of Sprint-centric instructions have been scattered around the forums and consolidating it in one place is enormously helpful.
Thanks!
gsu_golfer said:
Just out of curiosity, why do you want to do it?
Reflash the stock kernel.
Click to expand...
Click to collapse
I have no idea where to find the stock kernel. I need to do this because ever since I flashed CWM my auto rotate does not work.
prezmater said:
I have no idea where to find the stock kernel. I need to do this because ever since I flashed CWM my auto rotate does not work.
Click to expand...
Click to collapse
Have you tried the posted instructions on fixing rotation?
EDIT: I just added them to the OP.
Perform the following while tab is connected to pc via usb
1) open cmd prompt
2) cd to "adb.exe" directory (usually the android sdk tools directory)
3) adb shell
4) mount -t vfat /dev/block/mmcblk1p1 /mnt/sdcard
5) echo /dev/block/mmcblkp1 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
what do i start up the command prompt on my computer and what do i type in there come on can any body help me please i am still stuck on the Samsung logo i put the sd card back in my tab an it shows up cd drive..
gsu_golfer said:
Have you tried the posted instructions on fixing rotation?
EDIT: I just added them to the OP.
Click to expand...
Click to collapse
I was finally able to revert to stock with Odin.
Hi guys..
I just want to say thanks to the cm team for bringing ics to our touchpads. None of the work in this rom is my own.. I have just used the great tutorials and stuff I've picked up before to compile this. All credit to everyone who put work into this!
This rom includes cherry-picks from http://review.cyanogenmod.com such as the fixes below
A wifi fix -- review.cyanogenmod.com (Although some people are reporting wifi issues still. I recommend a full wipe)
I have also compiled my own kernel into this.. which I set the default CPU speed to 1.5ghz and the default governor to ondemand. I also added HAVS support. Although I don't know if we really need it on a tab. Maybe it will help slightly with battery life?
These are settings that I like and normally run. So don't flame me!
I am looking for pointers too.. for what to do next. I would like to add the webOS style recent apps mod next. Also ROMControl would be nice from here .. some pointers on how to include would be helpful. Any help greatly appreciated
So.. please remember.. I made this for myself... to teach me something.. someone just said I should post it!All credit goes to the people that contribute to cyanogenmod.
Cheers and enjoy
Buy me a beer if your a fan! Hit donate!
IN THIS BUILD
0.9.4 --- UPLOADING AS WE SPEAK!! Check back in an hour
Hopefully now has Goo.im app support for ease of updates
Not much else (synced 11/04)
managed to put this quick one together in the midst of everything.. so not had much chance to test. let me know how it is.
DOWNLOADS
http://goo-inside.me/devs/philicibine/ Thanks for hosting! Loving the download numbers here guys .. thanks for the support
http://www.cherrykang.mythreed.com/CherryKANG/ Big thanks to @Jedipottsy for this one.
Thanks for all the support from everyone!
Gapps are not included
My antutu benchmarks have been over 6000 btw
Hit the thanks button!
Previous Builds
0.9.3
Now with 4.0.4 inside!!
New Cyanogenmod boot animation!! I left this in coz it looks cooool
Min CPU clock is 384 (No more SoD's!)
Synced 31/03
Lots of new commits so YOU MUST FLASH GAPPS AGAIN!
0.9.2
Min CPU clock is 245 now.
Synced 10/03
Lots of new commits so YOU MUST FLASH GAPPS AGAIN!
0.9.1
Synced 08/03
Netflix and YouTube HD FIXED -- Thanks to wtogami for his cherry-pick script.
0.9
Synced 07/03
Now has stylus input merged
unsure if netflix works yet (please test) and.. nope! It doesn't :'-(
CherryKANG-Bricked
AS REQUESTED -- No changes.. just a bricked kernel thanks to show-p1984
0.8.9
At last it works! Lol
Synced 28/02 should have Netflix - edit - doesn't
Wifi fix
120 dpi - see post 2 for market fix
CherryKANG wallpaper - awesome!
0.4.8a
Kernel rebaked into it. should be lots smoother now
0.4.4a
kernel and wifi fixed
nothing else changed just wanted to get back to a working state
0.4.1a
re-done kernel as last build compiled with standard cm kernel
0.4a
Removed 270 degree rotation coz it derped the bootup :-/
Recompiled the kernel and increased min cpu to 245 (sleep issues)
0.3a First CherryKANG named build! lol =D
270 degree rotation
dpi set to 132 (Requires fixed market apk)
wifi scan interval increased
0.2a
Novalauncher - hope its OK?!
Scrolling cache fix - for smoother scrolling in the browser and other apps. (Kanged from aokp github) credits to them
And a pretty tasty boot animation! From MindSplit - thanks!
Hope you likey
REMEMBER ... This is now 120 dpi. You will either need to download LCD Density Pro from the market, or see below for a free alternative!
Posted by Hockey4life0099 thanks!
or you can use the free version (or dpi changer) to modify the dpi back to 160
---------- Post added at 02:15 AM ---------- Previous post was at 02:03 AM ----------
I wrote this. It looks more complicated than it is cause i broke it down step by step. Ignore my cracked out numbering scheme, i didnt feel like shifting all the numbers down when i added more info.
1. If you dont already have it, download es file explorer
1b. go to the application settings and clear the data for the market
1c. download dpi changer and change dpi to 135(dont reboot yet)
2. go into the options on there and check the root explorer option and the mount option
3. download to TP
http://www.sundergaming.com/downloads/tabletmarketdpiunlocked.apk
4. rename the file Vending.apk
5. long press to copy the file (in ES file explorer)
6. click the star in top right corner (favorites)
7. Choose the phone (/)
8. navigate to system/app
9. paste the app
10. find the app in there called marketupdater.apk or something similar and rename it marketupdater.apk.bak
11. reboot
12. see if you can download an app like flash player. If you cant go to next step
12b. get back to system/app and click the Vending.apk and let it install.
You can mess around with the dpi if you want, but also remember that if the text is small, you can change the default text size in the settings.
The issue i encountered with this method is sometimes the fix stops working, but all you need to do to get the apps to download once again is clear your market data in the application settings. It is obviously much easier to download the app mentioned in the op, but this is for the cheapskates. your only other option is download dpi changer and just switch the dpi back to 160. That is painless but you loose out on some app compatibility and some screen real estate. I myself change the dpi to 138 and change the font size to large. Everything seems to be perfect. Best balance out there IMO.
nevertells2 said:
Do not install CM9 over CM7. Some have gotten away with it and others like yourself run into trouble. Do a clean install, that means running ACMEUninstaller. Here are some instructions I created just for an occasion such as this:
Since the release of CM9, it has become abundantly clear to me that one
needs to do a clean install of the rom to avoid all the little
nagging issues that so many folks are reporting. Whether you are
installing for the first time, upgrading from CM7 or installing
an update of CM9, one really needs to do a clean install.
Since the advent of the official CM9 nightlies, installing
the rom and the Gapps files via CWM seems to be much more
reliable. You still need to wipe the cache and Dalvik cache
before you reboot after installing any rom. If you run into
trouble after an install via CWM, then read on.
Those who know how to do it otherwise and are comfortable with that
feel free to deviate from this document.
For first time installers, you can skip this part. First thing
you need to do is a nandroid backup of your current install and
copy it over to your PC for safe keeping. Next you should backup
your apps using either Titanium Backup or My Backup Root. This will
allow you to restore all your apps after you are done with this
update. If the install goes South, you can always restore your
nandroid backup.
For the first time installers, if you have not already prepared
your PC for this project, you need to download the following:
1. ACMEInstaller2
2. ACMEUninstaller
3. Moboot 0.3.5.zip
4. ClockworkMod.zip(CWM)
5. update-cm-9.0.0-RC0-Touchpad-alpha2-fullofbugs.zip
6. UniversalNovacomInstaller.jar
7. The latest Gapps.zip
The ACME files, Moboot, CWM and the Alpha2.zip can all be found
on the OP for Alpha2 at:
http://rootzwiki.com/topic/18843-releasealpha2-cyanogenmod-9-touchpad/
The universal novacom installer and Gapps files can be found by doing a Google
search on the names above and you will find the download page. I found
the novacom installer here:
http://universal-novacom-installer.googlecode.com/files/UniversalNovacomInstaller.jar
You should download the latest Gapps.zip which
the last time I checked at the link below was 20120317:
http://wiki.rootzwiki.com/Google_Apps
First thing, open the run box on your PC and browse to the novacomInstaller
file. This is a Java executable, so treat it just like any .exe file.
However, since it does not end in .exe, when you browse to find it,
you will have to tell the browser to show "All Files." Once it is in
the run box, click on OK and the Novacomd drivers will be installed,
the Palm,inc folder will be created and the novacom.exe will be placed
in that folder. Next if the ACME files you downloaded are zips, unzip
them both into the Palm, Inc folder which you will find in the Program
files folder. If not zipped, copy both into the Palm, Inc folder. Now
your PC is prepared for installing CM9, so everything applies to first
installers and upgraders from this point forward.
First timers boot into WebOS, upgraders can do the same or boot into
your current install of Android. Connect your TouchPad to your PC
with the usb cable and open Windows Explorer on your PC. You should
see either the TouchPad as a drive, or cm_tenderloin if you are already
running a version of CM9. If you have not already created a cminstall
folder on your TouchPad do so now. Also create a folder named ICS
Install.
Next you need to copy Moboot 0.3.5 and ClockworkMod(CWM) into the
cminstall folder on your TouchPad. Now copy the rom.zip and the
Gapps.zip file into the folder you created named ICS Install. It's up
to you which rom and Gapps file you use if you are installing something
different from what is listed above. If you are copying files to the
Touchpad drive, you now need to right click the drive letter and eject
the drive when you are done. If you are copying files to cm_tenderloin,
you can just close Windows Explorer and both of you disconnect the usb cable.
Upgraders, now you need to run ACMEUninstaller and when it is done, your
TouchPad will reboot back into WebOS. Now both of you need to reboot while
holding down up volume to put the TouchPad into WebOS recovery or bootie
mode. You will know you succeeded if you see a large white usb symbol.
Now plug the usb cable back in and you should hear the PC beep indicating
the TouchPad is connected. You will not be able to see the TouchPad in
Windows Explorer, so don't try. On your PC click "RUN" and type in CMD.
This opens the command window. First timers type in the following in the
command window:
cd/ and press enter. You will see C:\
Now type cd program files and press enter. You will see C:\program files
Now type cd Palm, Inc and press enter. You will see C:\ program files\Palm, Inc
Upgraders, your novacom.exe may be in a different folder, so go browse to that folder.
Both of you enter novacom boot mem:// < ACMEInstaller2 in the command window and
hit enter. After a few seconds, you should see what is fondly called the "Double Penguin" on
the Touchpad. When the install is done, the TouchPad will boot to Moboot. Tap
the volume on the TouchPad to stop the 5 second countdown if you see one. Now
select CWM using the Home button, then Install zip file from SD card and use the
volume rocker to move down to the ICS Install folder. Select that and move to the
Alpha2.zip and select that. Start the install. When it is done, use the go back
selection to go back to the main CWM screen and select reboot.
Once Android is booted up(be patient, it takes a couple of minutes the first time),
play around with the browser, set up wifi, just to make sure your install was
successful. Now reboot back to CWM and do the same procedure to install the Gapps.zip
you copied to the ICS Install folder earlier. You're done with a clean install.
Upgraders, you know what to do, first timers, I hope you have friend around to show
you the ropes or you own an Android phone and already know the ropes. Good Luck!
P.S. I strongly suggest you make a nandroid backup of your new installation right now.
First timers, one makes a nandroid backup using CWM. Boot to CWM, select "Backup and
Restore" and select "Backup".
Click to expand...
Click to collapse
Sent from my cm_tenderloin using xda premium
what's the wifi fix ?
This one http://review.cyanogenmod.com/12342
Sent from my cm_tenderloin using xda premium
Does this have Gapps cooked into it?
No sorry... I'm using v11 though
Sent from my cm_tenderloin using xda premium
Ok thanks...
If we have CM7 installed do we do a factory reset/wipe of the caches and then install the zip directly?
dtwconsulting said:
If we have CM7 installed do we do a factory reset/wipe of the caches and then install the zip directly?
Click to expand...
Click to collapse
Yep.. I think so. I think you can also flash without a wipe.. but wouldn't recommend.. and if you do.. flash the latest gapps
Sent from my cm_tenderloin using xda premium
Cheers mate
hi, whats the webOS style recent apps mod you mention in the OP?
Drop Box link already dead
Any one have a mirror?
Thanks!
MatthewYiu said:
Any one have a mirror?
Thanks!
Click to expand...
Click to collapse
Still working for me as of 10:40am. But.... here's a mirror just in case.
http://www.mediafire.com/?q60g82098q1vh16
Gapps v11:
http://goo.gl/u9s8g
For additional related files and mods, see sprice's thread here:
http://forum.xda-developers.com/showthread.php?t=1452324
f_padia said:
hi, whats the webOS style recent apps mod you mention in the OP?
Click to expand...
Click to collapse
When u hold home.. the apps come across the screen horizontally. Looks like the card feature of webOS.
Its in AOKP so I might have a look at their github later.
Sent from my HTC Vision using xda premium
tapout27 said:
Does this have Gapps cooked into it?
Click to expand...
Click to collapse
Read much?
how about hw acceleration?
mercado79 said:
Still working for me as of 10:40am. But.... here's a mirror just in case.
http://www.mediafire.com/?q60g82098q1vh16
Gapps v11:
http://goo.gl/u9s8g
For additional related files and mods, see sprice's thread here:
http://forum.xda-developers.com/showthread.php?t=1452324
Click to expand...
Click to collapse
flashing now! =)
Hello,
is the wifi fix included in the kernel? if so, is it possible to make a only a kernel-package to flash with CWM over the standard CM9-0.6?
Thanks
Not quite sure how to do that just yet. Will look at some other kernels tomorrow
Sent from my cm_tenderloin using xda premium
coolineho said:
how about hw acceleration?
Click to expand...
Click to collapse
This is just a kang. I lack the knowledge to even attempt looking into that!
Its working the same as cm
Sent from my cm_tenderloin using xda premium
This guide was written to provide more specific information for installation instructions than the OP below.
The Tubuntu installer application will not install the updated kernels for SBK1 devices and the manual procedure in post #2 will tell you what you need to do.
OP for Tubutnu by x3maniac
1. Download the newest “tubuntu v0.x.x” without Prime (system.img) or Ubuntu.img as it is written in the OP.
a. This download contains the application, boot.img file, and basic kernels available at the time of this guide needed for installation. There will be updates for kernels specific to an Ubuntu image as the developer is able to work on them. Check for new downloads and posts.
b. The download also contains drivers and installation for APX mode located using the “Other” tab in the application.
c. This download does NOT contain the Linux operating system nor the Android ROM.2. Extract all the files in “tubuntu v0.x.x” to a Tubuntu folder wherever you wish. 7-Zip is the zip program of choice but any others should work fine.
3. Download Prime ROM [stock hc w/ root](system.img)
a. This download is the system.img that contains a root enabled Android ROM.4. Extract the system.img file from this download.
a. Copy this file to the \images directory. The images directory is a sub folder of the TF-101 Ubuntu Installer application that you extracted in step 2.5. Download the Ubuntu image of your choice.
a. Currently there are 2 Lubuntu downloads. Read the bullets and determine which one you want.6. Extract the image file of this download and place it in the \images directory. Rename this file to ubuntu.img.
7. Open the TF-101 Ubuntu Installer application.
8. Connect your usb cable to the TF-101 and the computer.
a. Shut down the tablet.9. Enter APX mode by holding the volume up button first, then hold the power button until you hear the usb sound from the computer.
a. Your screen will be black and the TF-101 Ubuntu Installer application will light up green and say APX Detected if you correctly entered APX mode.10. Change the dropdown to SBK 1 located directly below the green APX Detected text.
11. Click on the Flash tab.
a. Select Android/Ubuntu and then hit Flash.
b. Android is the primary boot option here.12. You will see an install log in the right of the application. Mine takes about 15 minutes or so but you will know you are finished when you see the Android ROM load as well as the red text APX NOT Detected (in case your screen is off when you come back).
13. Proceed with setting up Android. DO NOT reboot or power off before the initial Android set up is complete.
14. Once completed and you wish to enter Lubuntu, power off the TF-101 and hold down volume down first and then power. You will see your screen say hit volume up in 5 seconds for recovery. Hit volume up within 5 seconds and it should boot your Linux graphical desktop environment.
Instructions for installing new kernels for SBK1.
1. In your Tubuntu installation directories, locate transformer.bct and bootloader.bin.
a. Copy these 2 files to the \bins directory of the Tubuntu installation application.2. Download the updated kernel from the OP.
a. Extract the .img file into the \bins directory of the installation application. You do not need to rename it because the command you enter in step 3 part b indicates the name of the kernel file.3. Open a command prompt to the directory of \bins for the Tubuntu installer application.
a. Type this command and hit enter: wheelie -1 -o 0x300d8011 --bl bootloader.bin -c transformer.bct
b. Type this command and hit enter: nvflash -r --download 6 whatever_the_kernel_filename_is.img
c. The filename is the name of the kernel you extracted and copied into the \bins directory. This name can really be anything so long as the command you enter reflects that filename.4. After the copy completes you will be back at the command prompt.
a. Type this command and hit enter: nvflash -r --go5. Your tablet will reboot after the nvflash mode is exited and depending on your configuration it will boot to Android. Boot to Linux now.
6. Download the supplemental kernel file to the root of your filesystem That is the / directory.
a. Open terminal and type this and press enter: sudo wget http://novaspirit.com/tubuntu/kernel_sup.tar.gz /
b. Then type this command and press enter: sudo tar zxvf /kernel_sup.tar.gz
c. This supplemental is installing modules and drivers to the appropriate locations.
d. Reboot.7. Please understand names of files especially the kernels and updates will change periodically. The commands and methods of extracting have not changed at this point so substitute the appropriate filename and you should be good to go.
For SBK1 devices, the installation of a custom Android ROM using recovery is very similar to updating the kernel instructions in the post above.
Instructions for installing custom ROM's for SBK1 with Lubuntu installed.
1. In your Tubuntu installation directories, locate transformer.bct and bootloader.bin.
a. Copy these 2 files to the \bins directory of the Tubuntu installation application.3. Copy the file cwrrecovery.img to the \bins folder.
a. You should be able to substitute a newer recovery file than what comes with the Tubuntu installation application.2. Download the zip file of the custom Android ROM you wish to install.
a. Copy it to either your Internal SD card or External SD card. Depending on the recovery version you flash you may not be able to use your Internal SD card.3. Open a command prompt to the directory of \bins for the Tubuntu installer application.
a. Type this command and hit enter: wheelie -1 -o 0x300d8011 --bl bootloader.bin -c transformer.bct
b. Type this command and hit enter: nvflash -r --download 5 cwrrecovery(orwhateverfilenameyourrecoveryis).img
c. The filename cwrrecovery.img is the name of the recovery that comes with the installer application. Please substitute appropriately if you are going to flash a different recovery application. You can also use TWRP just use the appropriate .img file name.4. After the copy completes you will be back at the command prompt.
a. Type this command and hit enter: nvflash -r --go5. Your tablet will reboot after the nvflash mode is exited and depending on your configuration it will boot to Android.
a. Now you want to boot to the Android recovery. Do that by powering off the tablet and booting like normal into recovery mode. This should be volume down and power. Hit volume up when prompted to do so. Flash your ROM according to the ROM owner's instructions. I recommend to complete your ROM's installation set up before proceeding to step 6.6. You must now flash your Tubuntu Linux kernel back or you will not be able to boot into Linux. Follow the instructions again from the \bins directory using the command prompt and putting your tablet back into APX mode which is volume up and the power button until the Tubutnu installation application shows green for APX Detected.
a. Type this command and hit enter: wheelie -1 -o 0x300d8011 --bl bootloader.bin -c transformer.bct
b. Type this command and hit enter: nvflash -r --download 5 whatever_the_kernel_filename_is.img
c. Type this command and hit enter: nvflash -r --go7. You should now be back into your Android ROM again. From here simply power off and boot into recovery using volume down and power. Then hit volume up when it says to on the screen. If Linux boots without issue then you have successfully reinstalled your kernel.
I did exactly what's in the post. With Tubuntu 0.4.7, Prime ROM, Lubuntu V1.1-rc1 (12.10) and the *updated kernel 12/10/2012* (without supplements)
But after Android initial boot, I reboot but it doesn't finish booting Android. It stops here:
http://i50.tinypic.com/2zswdw3.jpg
Anything I can do to fix this? Android does boot properly, but Lubuntu doesn't
If anyone knows how to fix this with only Ubuntu (and without Android) then that is fine too..
TomTcom said:
This guide was written to provide more specific information for newcomers.
The Tubuntu installer application will not install the updated kernels for SBK1 devices and the manual procedure in post #2 will tell you what you need to do.
Click to expand...
Click to collapse
sainthout said:
I did exactly what's in the post. With Tubuntu 0.4.7, Prime ROM, Lubuntu V1.1-rc1 (12.10) and the *updated kernel 12/10/2012* (without supplements)
But after Android initial boot, I reboot but it doesn't finish booting Android. It stops here:
http://i50.tinypic.com/2zswdw3.jpg
Anything I can do to fix this? Android does boot properly, but Lubuntu doesn't
If anyone knows how to fix this with only Ubuntu (and without Android) then that is fine too..
Click to expand...
Click to collapse
0.4.7 fixes the issue with sbk1 and you don't have to do it with these instructions anymore.
However I did try the newer kernel and got stuck at the same spot you did using my instructions just before the 0.4.7 was uploaded. Go to the original thread and post the issue there.
Thanks for the quick reply! Will post the issues
Outdated Thread But Valid Information
This thread is now outdated. X3Maniac has updated his Tubuntu installation application (0.4.7) to fix the issues with installing kernels and recoveries for SBK1 devices.
The information in this thread is still valid for behind the scenes and you can still use the wheelie and nvflash as standalone items if you wish to do something with your device outside the scope of the main thread.
Thanks for all the thanks from users!
Found a bug with 0.4.7. It's possible the tab may not reboot into Prime automatically with this version. When the dev has time it will get updated. If it doesn't reboot and the Tubuntu application says everything is done, manually hold power and let it reboot to Prime to finish installation.
question..
TomTcom said:
This guide was written to provide more specific information for newcomers.
The Tubuntu installer application will not install the updated kernels for SBK1 devices and the manual procedure in post #2 will tell you what you need to do.
1. Download the newest “tubuntu v0.x.x” without Prime (system.img) or Ubuntu.img as it is written in the OP.
a. This download contains the application, boot.img file, and basic kernels available at the time of this guide needed for installation. There will be updates for kernels specific to an Ubuntu image as the developer is able to work on them. Check for new downloads and posts.
b. The download also contains drivers and installation for APX mode located using the “Other” tab in the application.
c. This download does NOT contain the Linux operating system nor the Android ROM.2. Extract all the files in “tubuntu v0.x.x” to a Tubuntu folder wherever you wish. 7-Zip is the zip program of choice but any others should work fine.
3. Download Prime ROM [stock hc w/ root](system.img)
a. This download is the system.img that contains a root enabled Android ROM.4. Extract the system.img file from this download.
a. Copy this file to the \images directory. The images directory is a sub folder of the TF-101 Ubuntu Installer application that you extracted in step 2.5. Download the Ubuntu image of your choice.
a. Currently there are 2 Lubuntu downloads. Read the bullets and determine which one you want.6. Extract the image file of this download and place it in the \images directory. Rename this file to ubuntu.img.
7. Open the TF-101 Ubuntu Installer application.
8. Connect your usb cable to the TF-101 and the computer.
a. Shut down the tablet.9. Enter APX mode by holding the volume up button first, then hold the power button until you hear the usb sound from the computer.
a. Your screen will be black and the TF-101 Ubuntu Installer application will light up green and say APX Detected if you correctly entered APX mode.10. Change the dropdown to SBK 1 located directly below the green APX Detected text.
11. Click on the Flash tab.
a. Select Android/Ubuntu and then hit Flash.
b. Android is the primary boot option here.12. You will see an install log in the right of the application. Mine takes about 15 minutes or so but you will know you are finished when you see the Android ROM load as well as the red text APX NOT Detected (in case your screen is off when you come back).
13. Proceed with setting up Android. DO NOT reboot or power off before the initial Android set up is complete.
14. Once completed and you wish to enter Lubuntu, power off the TF-101 and hold down volume down first and then power. You will see your screen say hit volume up in 5 seconds for recovery. Hit volume up within 5 seconds and it should boot your Linux graphical desktop environment.
Click to expand...
Click to collapse
i just succeeded dual booting into ubunto.the prime rom just booted...can i install eos jb rom and still dual boot to ubuntu? thanks in advanced
Yes you can. You will need an updated recovery .img file that supports jb. You temporarily flash the new recovery boot into it then install the new rom. See my post on installing updated android roms. Its the third one I think.
oh sorry for the silly question,,i got it now thanks a lot.. nice job
Hi there,
First off, thanks for the tutorial and hard work!
I've been able to successfully install Lubuntu v1.2 and Lubuntu V1.1-rc1 but I've run into issues with both that I'm hoping you can help me with.
When I installed v1.2, my wireless adapter didn't work and I wasn't able to copy any files (kept saying I was out of space, probably a mounting issue).
When I installed v1.1-rc1, things seemed to work well (wireless worked) but when I tried to upgrade the kernel to 3.1 following the instructions, my mouse pad stopped working and so did my wireless adapter again. I saw that there is a way to fix the mouse pad but it seemed to require an internet connection. Any idea what I did wrong or how to fix the wireless on either v1.2 or on v1.1-rc1 with the 3.1 kernel?
Thanks!
You're welcome.
To solve the space issue, open terminal and execute this command: sudo resize2fs /dev/mmcblk0p8
The wireless adapter isn't working because the 3.1 kernel is not stable. Do Not Use It.
Get this from the OP:
Kernels
#470 Controlling your CPU for stability
Stable kernels (use with care for OC version)
[extreme]
2.6.36 - [cpu 1.6 ghz] [gpu 400mhz] - download
benchmarks - blowfish score 30
glxgear - 70 fps
Then get the supplement from the OP:
kernel supplement - 2.6.36.4-1210.zip
extract and copy the kernel suppliment to /lib/modules/
TomTcom said:
You're welcome.
To solve the space issue, open terminal and execute this command: sudo resize2fs /dev/mmcblk0p8
The wireless adapter isn't working because the 3.1 kernel is not stable. Do Not Use It.
Get this from the OP:
Kernels
#470 Controlling your CPU for stability
Stable kernels (use with care for OC version)
[extreme]
2.6.36 - [cpu 1.6 ghz] [gpu 400mhz] - download
benchmarks - blowfish score 30
glxgear - 70 fps
Then get the supplement from the OP:
kernel supplement - 2.6.36.4-1210.zip
extract and copy the kernel suppliment to /lib/modules/
Click to expand...
Click to collapse
Awesome, works like a charm. Thanks again!
Not sure if I'm the only one experiencing this, but every now and again whenever i click anywhere it thinks I'm trying to move a file (shows the little file icon when I move the mouse). Is this a known bug or just something in my settings I need to change?
Thanks!
---------- Post added at 12:40 PM ---------- Previous post was at 12:19 PM ----------
I also just found that my sound stopped working. It was working before when I used the instructions from the original post (using alsamixer) but I guess somewhere along the way of me messing around I broke it. Here is the error output when I try to play an mp3 in mplayer:
Code:
==========================================================================
Requested audio codec family [mpg123] (afm=mpg123) not available.
Enable it at compilation.
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, floatle, 128.0 kbit/4.54% (ratio: 16000->352800)
Selected audio codec: [ffmp3float] afm: ffmpeg (FFmpeg MPEG layer-3 audio)
==========================================================================
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
MPlayer interrupted by signal 6 in module: ao2_init
I've tried searching for a solution but still no luck. I've also tried other players and they don't work either. Any help would be greatly appreciated.
Thanks!
Treizy said:
Not sure if I'm the only one experiencing this, but every now and again whenever i click anywhere it thinks I'm trying to move a file (shows the little file icon when I move the mouse). Is this a known bug or just something in my settings I need to change?
Thanks!
---------- Post added at 12:40 PM ---------- Previous post was at 12:19 PM ----------
I also just found that my sound stopped working. It was working before when I used the instructions from the original post (using alsamixer) but I guess somewhere along the way of me messing around I broke it. Here is the error output when I try to play an mp3 in mplayer:
Code:
==========================================================================
Requested audio codec family [mpg123] (afm=mpg123) not available.
Enable it at compilation.
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, floatle, 128.0 kbit/4.54% (ratio: 16000->352800)
Selected audio codec: [ffmp3float] afm: ffmpeg (FFmpeg MPEG layer-3 audio)
==========================================================================
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
MPlayer interrupted by signal 6 in module: ao2_init
I've tried searching for a solution but still no luck. I've also tried other players and they don't work either. Any help would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
See KingZaks post for sound settings. It's in the op and his signature.
The clicking shouldn't do that every time. Did you extract the supplemental zip and are you using the 1.2-1.6ghz kernels?
Hmm, I'm thinking of installing fresh to see if things get fixed. Is there a way to do that without touching the Android partition? I don't want to have to reflash EOS and what not. Do I just not include the Prime img in the images folder?
Thanks!
A Terribly Confused Noob!
Hello:
I am terribly confused and I hope that someone can help me to understand a few things! I am sorry if I don't understand all the links but they seem to go round and round. Right no I have no less that 25 tabs open trying to figure out the first step.
So, to my first question (probably the first of many): This guide was written to help "newcomers", of which I am definitely one. But, right under that statement comes the statement "The Tubuntu installer application will not install the updated kernels for SBK1 devices and the manual procedure in post #2 will tell you what you need to do." Does that mean I'm actually supposed to start at Post #2? But Post #2 assumes I already have "Tubuntu installation directories", which I don't have so I can't locate the two files.
I am attempting to be a user of Ubuntu on my Transformer, not a developer - I take my hat off to all of you that have put your Transformers in harm's way developing the techniques and software that I want to use, but the instructions are terribly confusing for someone not familiar with all of the terms!
Any help would be most appreciated and I thank you in advance.
Sparky
TheArtfulDodger said:
Hello:
I am terribly confused and I hope that someone can help me to understand a few things! I am sorry if I don't understand all the links but they seem to go round and round. Right no I have no less that 25 tabs open trying to figure out the first step.
So, to my first question (probably the first of many): This guide was written to help "newcomers", of which I am definitely one. But, right under that statement comes the statement "The Tubuntu installer application will not install the updated kernels for SBK1 devices and the manual procedure in post #2 will tell you what you need to do." Does that mean I'm actually supposed to start at Post #2? But Post #2 assumes I already have "Tubuntu installation directories", which I don't have so I can't locate the two files.
I am attempting to be a user of Ubuntu on my Transformer, not a developer - I take my hat off to all of you that have put your Transformers in harm's way developing the techniques and software that I want to use, but the instructions are terribly confusing for someone not familiar with all of the terms!
Any help would be most appreciated and I thank you in advance.
Sparky
Click to expand...
Click to collapse
Hey Sparky, there's no more active development on this just so you are aware. That means you can make your own images for newer Linux builds if you wish but things such as hardware acceleration and kernels will not be updated.
In step 1 of my guide you are going to the OP link by the dev who made the Windows based Tubuntu application.
Go to where you see these links:
tubuntu v0.4.7 [1mb] Executable ONLY - download v0.4.2b and replace the tubuntu.exe with this one
download v0.4.7 (jan, 3 2013)
tubuntu v0.4.6beta [1mb] Executable ONLY - download v0.4.2b and replace the tubuntu.exe with this one
download v0.4.6b (dec, 10 2012)
tubuntu v0.4.2beta [78mb] without Prime(system.img) or ubuntu.img
download v0.4.2b (dec, 7 2012)
tubuntu v0.3alpha [57mb] without Prime(system.img) or ubuntu.img
download v0.3a
Prime ROM[stock hc w/ root](system.img)
download
Download tubuntu v0.4.2beta (78mb).
Download tubuntu v0.4.7 (1mb).
Extract the files to whatever location on your Windows machine.
The 1mb file is a replacement of tubuntu.exe file. So just copy/paste and overwrite that file on your Windows machine.
Do you know how to put your tablet in APX mode? If not, you open tubuntu.exe (you might need .net 4.0 Microsoft framework to run the tubuntu.exe). With the tablet off and usb connected to your windows machine, hold volume up and power. The application tubuntu.exe should have a green indicator that it's connected. Change the dropdown to sbk1.
From there you can choose how you want to flash, such as android as the default boot and linux as the secondary boot.
Ignore.
GOT TROUBLE WHILE INSTALLING A RECOVERY? GET A WORKING TWRP RECOVERY AFTER 2 MINUTES ON YOUR XPERIA Z2 D6503/D6502:
open any root explorer app like ES FILE MANAGER
Delete /system/etc/mm_twrp_recovery folder
Go to /system/bin/ folder
Look for the "chargemon.stock" file - If it's present, delete this one: chargemon - and now, rename the chargemon.stock to chargemon
Look for the "taimport.stock" file - If it's present, delete this one: taimport - and now, rename the taimport.stock to taimport
Reboot
download "recovery fix.zip" from mega.nz
extract the file and run "adbrecoveryfix.exe" the .exe file will install some needed files (normally into C:\Minimal ADB and Fastboot\ )
copy the files from the folder "RECOVERY FILES" into the "Minimal ADB and Fastboot" Folder
connect your xperia with the pc
open the "m a a d" folder and then SHIFT+RIGHT CLICK to open a command window
now type:
adb shell
su root
mount -o remount,rw /system
exit
exit
install.bat
Click to expand...
Click to collapse
don´t forget to press enter after "adb shell", "su root" and so on!
now your recovery will install again without any errors!
YOU HAVEN`T INSTALL ANDROID MARSHMALLOW YET BECAUSE YOU WANT TO KEEP ROOT RIGHT, XPOSED AND THE RECOVERY?
THEN CHECK OUT THIS THREAT
http://forum.xda-developers.com/xpe...03-23-5-0-570-prerooted-t3364817#post66513485
Another simple Method: thanks @meer_mortal
Deleted folders and rename chargemon etc
Plugged phone into computer with dev settings, debugging etc
Open root explorer to make / -RW
Run install.bat with CMD
Boom! MM with TWRP
To get in into recovery reboot press down after green LED
Click to expand...
Click to collapse
BUGS: none
IMPROVABLE: boot into recovery only works manually (when it vibrates and a green LED shows up press VOL DOWN till the LED is purple) "QUICK BOOT" and similiar Applications cannot boot into the recovery!
Which files are inside .exe?
Can i get Decryption key? to download
wheal said:
Which files are inside .exe?
Click to expand...
Click to collapse
Only adb and fastboot files! You can also download them from "chip.de" it's called "Minimum adb and fastboot"
Sent from my D6503 using XDA-Developers mobile app
Natur said:
Can i get Decryption key? to download
Click to expand...
Click to collapse
I am sorry that i gave you the wrong link just a minute
Sent from my D6503 using XDA-Developers mobile app
Natur said:
Can i get Decryption key? to download
Click to expand...
Click to collapse
Now the right link is in the decsription...
freaky2xd said:
Now the right link is in the decsription...
Click to expand...
Click to collapse
Thanks,
is this method works if i use Android 5.x or 4.x ?
reknew said:
is this method works if i use Android 5.x or 4.x ?
Click to expand...
Click to collapse
you can try. but if I were you, i`d better use [NUT`s] DualRecovery! its simple and i have already used it for 4.4.4 and 5.1 on the Z2!
http://nut.xperia-files.com/path/XZDualRecovery/XZDualRecovery_2.8.26
just look for the Z2 file... its a zip file! its installer and flashable zip!
thanks man.
this worked for me. I somehow lost recovery but regained it on Android M after following your steps!
pseudoheld said:
thanks man.
this worked for me. I somehow lost recovery but regained it on Android M after following your steps!
Click to expand...
Click to collapse
you are welcome the same happs why i created this threadened to me, that´s why I started this recovery fix thread
Hands health
İts works, good job thanks
Thanks for this. You can also use root explorer to make the phones file system writable before running install.bat
balabanos said:
İts works, good job thanks
Click to expand...
Click to collapse
thanks
meer_mortal said:
Thanks for this. You can also use root explorer to make the phones file system writable before running install.bat
Click to expand...
Click to collapse
try it.
meer_mortal said:
Thanks for this. You can also use root explorer to make the phones file system writable before running install.bat
Click to expand...
Click to collapse
This is a Statement not a question
freaky2xd said:
try it.
Click to expand...
Click to collapse
I did. That's how I got TWRP on MM
Following your guide
I downloaded the files from OP post
Deleted folders and rename chargemon etc
Plugged phone into computer with dev settings, debugging etc
Open root explorer to make / -RW
Run install.bat with CMD
Boom! MM with TWRP
To get in into recovery reboot press down after green LED
Win!
meer_mortal said:
This is a Statement not a question
I did. That's how I got TWRP on MM
Following your guide
I downloaded the files from OP post
Deleted folders and rename chargemon etc
Plugged phone into computer with dev settings, debugging etc
Open root explorer to make / -RW
Run install.bat with CMD
Boom! MM with TWRP
To get in into recovery reboot press down after green LED
Win!
Click to expand...
Click to collapse
oh yeah you`re right of course i thought it might be a question xD
I added your post as a quote to the description
You Want TWRP v3.0.0.2 ?
Then flash @pec0ra customKernel v8.1!
It unlocks:
Based on Sony 23.5.A.0.570 kernel sources
Compiled with linaro GCC 4.9.1 toolchain, -O3
Governors : interactive, ondemand, performance, conservative, smartassV2, intellidemand2 and intelliactive.
Fast hotplug
CPU overclock up to 2.8 GHz Thank's to Faux123 and DooMLoRD
Changed GPU frequency table to 27 - 657 MHz Thank's to Myself5
Sony RIC disabled
Undervolt
TWRP recovery included, fota partition support
Breathing notification light thank's to glocklee
Force Fast Charge
KCAL Advanced color control Thank's to savoca
Click to expand...
Click to collapse
Visit this Link:
http://forum.xda-developers.com/xperia-z2/orig-development/kernel-abricot-kernel-v3-t2965480
guys, after i open install.bat and phone rebooted. My phone didn't open. it is in bootloop now and after opening, phone try to open twrp but it can't so the phone reboot itselft over and over again.. i did hard reset. and open the phone again, same things happened. Help me please..!
Abdülcelil said:
guys, after i open install.bat and phone rebooted. My phone didn't open. it is in bootloop now and after opening, phone try to open twrp but it can't so the phone reboot itselft over and over again.. i did hard reset. and open the phone again, same things happened. Help me please..!
Click to expand...
Click to collapse
reinstall the firmware via flashtool. choose everything to wipe