Related
UPDATE!!
It seems that a solution for the problems has been found for:
- Reception difficulties
- BAD gsm performance
- No reception on the phone
http://forum.xda-developers.com/showthread.php?t=389601
Please go to this URL, read it, upgrade your broken polaris device and respond in the poll that it either worked for your or didn't
----------
Hi guys,
after upgrading my Polaris from the default supplied rom 1.58.21.23 to the latest 1.64.08.21, I have no reception in my house and even difficult reception on the street.
I reversed back to version 1.58.21.23, but even then, still have issues with reception.
Does anybody have the same problem, or had the same problem and find a fix?
Rroet
Hello,
I do have the same problem, and got it on the same way as you did?
could someone please help us?
Do you have the same difficulty as I do:
I've followed the procedures as described in manuals everywhere:
- remove the memory card
- be happily synced
- start app
- device goes into the tricolor screen
- replug the usb as described on the polaris screen
- Flashing startssss.... goes... goes...
- HANGS at 99%
- Have to do recovery procedure as shown on screen.
- Flashing procedure starts second time
- hits 100%
- Now i've got a bad reception? On my previous polaris (replaced due to a phonespeaker defect) had 2 bars even after upgrading. My new Polaris doesn't have any bars after I upgraded (It did have 2 bars before upgrading)
Any expert here with information?
I'm having the same issue, by upgrading RADIO 1.58.21.23 to the latest 1.64.08.21 I got weak signal on GSM. Two bars on signal icon on the top near the BTS.
I'm using BEPE 0.67 ROM with WM 6.1, downgrading the RADIO doesn't help. I have searched thru this forum and didn't find any relevant solution
I was having the same problem with you. I have tried everything including flashing every rom/radio available and performing hard resets at every stage. Unfortunately, in the end I had to get my cruise replaced.
These are my original Cruise details, just to see if there is anything in common:
HK Traditional Chinese HTC Cruise
1.27.832.1. CHT
01/10/08
1.58.21.23
25.65.30.04H
Very interesting issue
I read this several times in different threads now.
Fortunately myself doesn't suffer this issue and i have
also upgraded to 1.64.08.21. Lucky one.
Maybe one should start a poll about this
Would be nice to know the results.
Olioaglio
I have this issue too after Hard-SPL and ASerg Rom, I have problems in o2 German network... very weak signalstrength 1/4 or mostly 0/4 (no network, denied).... i tried original radio 1.58.21.23 and 1.64.08.21 any1 know what could have happened? can a rom upgrade damage the radio hardware in any way? would be hard to believe... with german's BASE i have at least from 2/4 to 4/4 signal strength and sometimes I even get 3G... in my old o2 orbit (artemis) everything is at max strength
I have the same problem after flashing the 1.64.08.21 radio. Is there no solution?
I guess I am lucky, but with 1.64.08.21 and Bepe's 0.67 ROM I don't have any problems. There is no change at all. Signalstrength is the same, 3G is working fine.
1.64.08.21 and Bepe's 0.67 ROM
Me too
I have the o2 orbit 2 (POLA200)
Rroet said:
after upgrading my Polaris from the default supplied rom 1.58.21.23 to the latest 1.64.08.21, I have no reception in my house and even difficult reception on the street.
I reversed back to version 1.58.21.23, but even then, still have issues with reception.
Click to expand...
Click to collapse
Strange, I'm using also 1.64.08.21 and it's working like a charm... I do have another network provider (KPN, not t-mobile). Have 4 bars reception... Never had real problems with the reception too...
POLA100 (Touch cruise). Only my flash of radio succeeded in 1 time (not had to reboot before hitting the 100%). Also The Netherlands, so it doesn't seem to be country bounded.
Does it find your network? (Menu => settings => Phone (on personal tab)) then choose tab Network.
Current network: T-mobile
Network selection: Automatic
You can try Find Netwok over there, or Set network. Please also check the tab "Band", should be on Auto (both options).
My problem is when I manually check networks, I can find KPN NL and Orange NL everywhere, but not T-Mobile or Vodafone.. whilest on my wife's Vox I have 3 bars of network, on my N73 (nokia) I have 3-4 bars as well.
VERY ODD!
is it possible radio of pola100 and pola200 are different, even they share the same version number?
mavvy4ever said:
is it possible radio of pola100 and pola200 are different
Click to expand...
Click to collapse
Could be, but then again, Rroet and I are having the same devices (pola100), are living in the same country, having the same radio version (the 1.64.08.21), the only difference is that he has another provider (which I can find if I search for networks)
Rroet said:
My problem is when I manually check networks, I can find KPN NL and Orange NL everywhere, but not T-Mobile or Vodafone.. whilest on my wife's Vox I have 3 bars of network, on my N73 (nokia) I have 3-4 bars as well.
VERY ODD!
Click to expand...
Click to collapse
In June I will switch network (to Vodafone)... I hope it all keeps working... Really strange that you can't find your network anymore. If I scan for networks I see them all (also Vodafone and T-Mobile).
(Think you've allready done this) but what will happen if you give your device a hard reset, or flash Windows Mobile again to your mobile... This because I'm having the same device, can find your network and having the same radio version.
hi there!
I unfortunately got the same issue.
I got a XDA Orbit 2 from O2 Germany. Did the hardspl unlock(used the tool from olipro) after that i flashed the bepe 0.67 premium bepe rom.
Right now my orbit is disconnected most of the time, or has real bad signal strength. It would be very great if this can be fixed.
Greets
EDIT:
flashed the 1.64.08.21 got the same prob.
Got another orbit2 with everything in original delivery state. is there a possibility to "clone" the device back to original state?
I got very bad reception when update radio 1.64.08.21 . it frequenly lost connection when I got phone call , tried to downgrade and no result
I have vodafone simcard and now I must force to swich to 3g connection to make a phone call . when Iam on gsm I conldnot make any phone call at all , I am now just wait and see someone smart to show me how to correct this trouble
the phone work on my 3 sim but it is not as good as it was before
To make it complete: I have the O2 Orbit 2 (german) (POLA200) and I
have ugraded to the 1.64.08.21 without glitches (worked at first time,
did it through bootloader mode) and it is working with the same (good)
reception as it did before (phuuuh). Maybe it has something to do with
the flash problems at first time, which some users had. Could someone
sort it out? It's really goring, that even (successful) backflash to the stock
radio does not seem to fix the issue like the Poll indicates
Olioaglio
Edit: using Bepe 0.64 GER Opera with the Orbit2 ATM.
Edit2: Thought it might be a good idea to crosslink this thread to the
Polaris Radio ROMs thread to get things together.
What about the IMEI number btw?
I don't know if this is what happens by default, but my IMEI number is 2 digits longer in the software, then it is in the hardware:
example of my hardware IMEI: 123
in software it reads 12301
Does this matter in any way?
Interesting stuff... as Olioaglio said maybe there´s a relation to how it was flashed. If it was clean install or the process had to be repeated. Can anyone with this problem report back on this issue. I tried the new radio here in Spain but I went back to the stock radio as it seemed to have a better reception and battery life. I must admit I´m rather cautious about trying different radios as I fried my Hermes due to the radio and now it can´t connect at all.
I've had no problems/glitches during the flash process but I have the same reception problems as everyone else. Even using a friend's SIM with a different carrier made no difference in reception.
Hello
I have a new HTC P3600 that I upgrated to ROM version 1.23.405.2 from the HTC website.
It is not receiving any network, I am getting this symbol " ! " on the signal strength indication. I tried a different sim card with the same result, I tried turning the phone on and off, I tried the flight mode on and off, I did a soft reset and still nothing.
By the way this was the same before and after the ROM update. Also this area has full reception without ever experiencing problems, as my other Windows Mobile has full reception on it.
My Radio version is 1.38.00.11 I am thinking of upgrading the radio version, maybe this will help but I thought better to ask here first.
Thanks
P.S. I did make many searces in this forum but I couldnt find anything exactly like my problem
^Hi guys, have a very strange issue, nobody talk about that.
I was on ARTEMIS 2.5 ROM FRA, i was using my phone all the days, and in the middle of the afternoon I loose the connection to phone network. That mean i have a 3G icon, can go in internet with no problem, but now i can't phone anyone, the HD2 just say me Impossible operation.
This issue is related with some other weird issues, for example when i push Data connection, they always ask me to autoconfigure it with my operator ( SFR France).
So i tried some things :
-First install Artemis 2.9b, Internet Not OK, Phone Not OK.
-Back to Official 1.66 ROM, with Radio 2.06.51.07, Internet Ok, Phone Not OK.
So what could i understand from that issue. Maybe a RilPHONE Issue ? Hardware Issue? Silly french issue ?
Thanks in advance for your help
BEst Regards
RCS
hello friends, ask you about a strange problem.
i've bought a hd2 t mobile from USA ebayer, unlocked and with WINDOWS PHONE 7. I put my Italian SIM (vodafone italy) and notice that i can't use it. call seller and he wrote me unlock code. don't remember if after this i have tried to call, or if have seen the signal strenght, but i have changed to android. the seller used magldr 1.10, but i experienced that with this version the system had restart and restant such as looping mode. so i've found magldr 1.13, and this one permits to android to start.
Now everything runs well, except i can't call. the phone runs, because i can do emergency calls, and with another SIM, 3G italy, an UMTS provider, in some places i can use it normally. but is very poor signal, the most is absent. when i put inside Vodafone SIM i have no signal at all. Close to this i have italian LEgend HTC with Another Vodafone SIM and Full signal. if i ask to find network, even with vodafone, he finds only 3G.
If this problem come from bad unlocking, s there something to do to solve it? i though to try to unlock it againm but now it doesn't ask me for code. so what to do? lock it and unlock again? is possible?
another problem: with phone there is a 16 gb Sd card. i see only 200 mb, before i thought was damaged, but trying to reinstall wP7, i have read on a site that is WP7 that format 200 mb for working. now, how can i do to take back the entire 16 gb of space?
eziofulk said:
hello friends, ask you about a strange problem.
i've bought a hd2 t mobile from USA ebayer, unlocked and with WINDOWS PHONE 7. I put my Italian SIM (vodafone italy) and notice that i can't use it. call seller and he wrote me unlock code. don't remember if after this i have tried to call, or if have seen the signal strenght, but i have changed to android. the seller used magldr 1.10, but i experienced that with this version the system had restart and restant such as looping mode. so i've found magldr 1.13, and this one permits to android to start.
Now everything runs well, except i can't call. the phone runs, because i can do emergency calls, and with another SIM, 3G italy, an UMTS provider, in some places i can use it normally. but is very poor signal, the most is absent. when i put inside Vodafone SIM i have no signal at all. Close to this i have italian LEgend HTC with Another Vodafone SIM and Full signal. if i ask to find network, even with vodafone, he finds only 3G.
If this problem come from bad unlocking, s there something to do to solve it? i though to try to unlock it againm but now it doesn't ask me for code. so what to do? lock it and unlock again? is possible?
another problem: with phone there is a 16 gb Sd card. i see only 200 mb, before i thought was damaged, but trying to reinstall wP7, i have read on a site that is WP7 that format 200 mb for working. now, how can i do to take back the entire 16 gb of space?
Click to expand...
Click to collapse
If I were you I'd flash back to the Stock TMOUS ROM and make sure the phone is mechanically sound before doing any more software installs. If the phone doesn't work from a stock ROM, then the device is defective. You have too many variables that could be causing the problems. Get back to stock and then add one thing at a time to your device.
EDIT: An unlock code should work regardless of what you do with the phone, so I don't think that is the issue.
Ok first off what radio version do you have on the HD2 as this might be your reception problem. Certain radio versions work better in certain areas but the latest version 2.15.50.14 seems to work well for everyone. TO flash a different radio version to your HD2 go to "[RADIO] The HTC HD2 Master Radio Thread" and download the radio version you want to use, you may want to try several different ones until you find one that works for you. If you have the international HD2 with 512MB ram you can flash any radio version. If you have the TMOUS HD2 you can only flash radio versions2.06.50.xx and up, do not flash a 2.04.50.xx, 2.05.50.xx, or any x.xx.51.xx tradio version to a TMOUS as it will brick the phone. If you have all whit external buttons at the bottom of the HD2 you have a international model, if you have a green send button and a red end button it is a TMOUS. Put your HD2 into the multicolor bootloader screen by holding the volume down button down while powering on, connect your HD2 via USB and wait for the Serial in the white bar of bootloader to change to USB then flash the radio.
To get your full 16GB back on your memory card you will have to reformat it cause WP7 puts a funky format on the SD card as it uses the SD card as the internal memory. The easiest way to do this is to get a SD card adapter and put your SD card in it then stick it in a digital camera and format it with the camera then format it with your computer using fat 32, this will give you your full 16GBs back.
thank you both for help. i have already tried to go back to original rom and windows 6.5 for Tmous. no way. but it can call, emergency call runs and with a 3G SIM i can call. the seller said he unlocked hd2 in USA before sending me, i had to unlock it again wit my sim. so there is something strange. seems it has a low signal power, and refuse GSM signal. tomorrw i will take it in a lab for testing of signal. then i will wite here again.
eziofulk said:
thank you both for help. i have already tried to go back to original rom and windows 6.5 for Tmous. no way. but it can call, emergency call runs and with a 3G SIM i can call. the seller said he unlocked hd2 in USA before sending me, i had to unlock it again wit my sim. so there is something strange. seems it has a low signal power, and refuse GSM signal. tomorrw i will take it in a lab for testing of signal. then i will wite here again.
Click to expand...
Click to collapse
Are you saying you could not flash it back to stock, or that after the flash it appears to be still locked?
i flashed back, removed Hspl, putting a rom on SD and renaming leoimg.***.
then i have installed an original win 6.5 rom.
the same i've done today again, only with a rom for win 6,5.
notice: in win 6,5 the IMEI was longer, finished with a 01 more than other view from android doing *#06#- may be is not important.
the only way to see a carrier working is to put 3G sim and the correct APN.
eziofulk said:
i flashed back, removed Hspl, putting a rom on SD and renaming leoimg.***.
then i have installed an original win 6.5 rom.
the same i've done today again, only with a rom for win 6,5.
notice: in win 6,5 the IMEI was longer, finished with a 01 more than other view from android doing *#06#- may be is not important.
the only way to see a carrier working is to put 3G sim and the correct APN.
Click to expand...
Click to collapse
Ok someone correct me if I am wrong please as I am going on what I consider to be basic knowledge of both subjects here. But the APN settings are basically just for your data/internet connection to work properly with the carrier you have as you have to access their servers to go online.The radio is what is in control of voice communication along with the phone hardware. The hardware also has control over the data connection to but it is more to the extent if you can use 2G, 3G, or 4G. So in summary if you are having voice problems change your radio version, if you are having data connection trouble check your APN settings.
hardware
thank yo for your help.
i have took back the phone from LAB.
no way, there is a hardware damage, due, may be, to transport from USA to Italy. the involved side is in reception, the chip is damaged due to accidental shock, and has a very low activity. only where the signal is full, the damaged filter let it work, but it's always a strange way to do it, totally full signal and no signal in a few seconds. T.Mobile is not supported by european HTC, so i must send back the phone in USA
Hi All,
I am currently running the Nexus One Gingerbread v2.7 with radio version 2.15.50.14 on my HTC HD2.
My phone has been running this ROM for the past few months with no real issues but today I have 'no service'
I have tried a reboot that usually sorts it out but that has not worked, I have even powered off the phone and taken the sim card out with no luck also
Any advise/help would be greatly appreciated.
Regards
Stevo
made sure there are no outages in your area with your provider?
Other Orange customers in my office are ok.
try one of their sims then in your phone and your sim in another phone