Related
I have JF 1.1 Holidey version (I think it says: Model no.: Android dev Phone 1; Firmware Version 1.1; Baseband Version: 62.33.20.08H_1.22.12.29 ; Kernel version: 2.6.25-01843-gfea26b0 [email protected] #1 ; Build number: holiday_devphone-userdebug 1.1 UNLOCKED 130444 test-keys) and when I try to update it to jf1.5 it gets stuck on the G1 logo, I tried using differnet updates to and differnt sd cards
and even tried the JF updater and it dosent work (Both the radio update and the update itself), I'm a bit frustrated, my brother rooted the phone for and installed the RC29 rom and the JF rom,
it offered me a system holiday update awaile ago and when I updated it froze on the G1 logo after I waited a long time (about 45 min) I removed the battery and started the phone again.. then I saw about 35MB free space (before I had only 10MB) and I think that from that point it added the holiday but I'm not sure if it wasn't already before that.. I realy need your halp with this.. I can't find a way to boot my phone and start a bootloader..
I search in many threads and couldn't find an answer..
p.s. I was able to get to the fast boot when I press the power + Camera but I don't know how to use it..
Please Search and post in the correct thread/forum. Thank you.
shutdown
home+power
alt-w
system should auto reboot.
if no joy, grab your favorite ROm (I suggest Cyans) and through it on your SDcard's root as update.zip. then
shutdown
home+power
alt+l
alt+w
alt+s
home+back
system will reboot. let it hang for a few minutes, it takes a little bit to restructure the file system and boot for the "first" time. much in the same way as booting up a comp with a fresh install of windows.
Denkai said:
shutdown
home+power
alt-w
system should auto reboot.
if no joy, grab your favorite ROm (I suggest Cyans) and through it on your SDcard's root as update.zip. then
shutdown
home+power
alt+l
alt+w
alt+s
home+back
system will reboot. let it hang for a few minutes, it takes a little bit to restructure the file system and boot for the "first" time. much in the same way as booting up a comp with a fresh install of windows.
Click to expand...
Click to collapse
when I boot with home+power it get stuck..thats my problem
Death_Keeper said:
I have JF 1.1 Holidey version (I think it says: Model no.: Android dev Phone 1; Firmware Version 1.1; Baseband Version: 62.33.20.08H_1.22.12.29 ; Kernel version: 2.6.25-01843-gfea26b0 [email protected] #1 ; Build number: holiday_devphone-userdebug 1.1 UNLOCKED 130444 test-keys) and when I try to update it to jf1.5 it gets stuck on the G1 logo, I tried using differnet updates to and differnt sd cards
and even tried the JF updater and it dosent work (Both the radio update and the update itself), I'm a bit frustrated, my brother rooted the phone for and installed the RC29 rom and the JF rom,
it offered me a system holiday update awaile ago and when I updated it froze on the G1 logo after I waited a long time (about 45 min) I removed the battery and started the phone again.. then I saw about 35MB free space (before I had only 10MB) and I think that from that point it added the holiday but I'm not sure if it wasn't already before that.. I realy need your halp with this.. I can't find a way to boot my phone and start a bootloader..
I search in many threads and couldn't find an answer..
p.s. I was able to get to the fast boot when I press the power + Camera but I don't know how to use it..
Click to expand...
Click to collapse
yo power off the phone u said its rooted so when u turn it back on hold home till u see stuff scrolling on the screen then press alt w to wipe when thats done it should tell you to press home and back to reeboot that worked for me when i first rooted and got stuck in g1 logo
I tried it but it's still stuck on the logo..
Death_Keeper said:
I tried it but it's still stuck on the logo..
Click to expand...
Click to collapse
its stuck after u did a wipe or u didn't get to go into recovery mode?
didnt got to the recovery mode.. it's is frozen on the g1 logo..
Death_Keeper said:
didnt got to the recovery mode.. it's is frozen on the g1 logo..
Click to expand...
Click to collapse
thats weird cause if u can go into boot loader i dont understand why it wont let u go to recovery cause i had the same problem when i first rooted then some one said try holding home when u power up and it worked
cilokid said:
thats weird cause if u can go into boot loader i dont understand why it wont let u go to recovery cause i had the same problem when i first rooted then some one said try holding home when u power up and it worked
Click to expand...
Click to collapse
when I press power+home nothing happens it's stays stock in the g1 logo, when I press power+camera it's brings me to the green white screen which I dont know how to use.. mabye I can fix it with that if any one could halp me how..
Death_Keeper said:
when I press power+home nothing happens it's stays stock in the g1 logo, when I press power+camera it's brings me to the green white screen which I dont know how to use.. mabye I can fix it with that if any one could halp me how..
Click to expand...
Click to collapse
you have to hold home for a few it does'nt pop up right away
I held it for over 2 min.. still stuck..
I'm in the same boat. Stuck on G1 logo screen.
As the mod indicated this Topic is discussed many times already.
I'm having the same issue, i just called tmobile and getting it replaced.
ya, your recovery.img file is probably screwed up in the flash. download the dreaimg.sbh file or whatever for the RC29/RC7 and start over from scratch, it should fix your recovery menu. you are able to get into your camera+power menu, so your are not bricked. just be careful next time.
Help!
I think I effed up. I finally was able to install the JF 1.5. I was messing around with themes and then i rebooted it. I hit alt W and now it's stuck on the new android logo. It seems to be freezing and it wont get passed that screen. What can I do, if anything??
Breakthecycle2 said:
I think I effed up. I finally was able to install the JF 1.5. I was messing around with themes and then i rebooted it. I hit alt W and now it's stuck on the new android logo. It seems to be freezing and it wont get passed that screen. What can I do, if anything??
Click to expand...
Click to collapse
Search before you post??
http://www.google.com/cse?cx=000825...+logo&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
So here is my problem. I updated my phone to FRF83 well I tried to. After I flashed it everything said ok then reboot but now when it turns on its stuck at the X logo with the unlock symbol. I tried to reflash and wiped and nothing. Any suggestions? Please
What were you on before? Did you also update the radio?
nak#57 said:
So here is my problem. I updated my phone to FRF83 well I tried to. After I flashed it everything said ok then reboot but now when it turns on its stuck at the X logo with the unlock symbol. I tried to reflash and wiped and nothing. Any suggestions? Please
Click to expand...
Click to collapse
How long are you waiting at the X logo? The first boot takes a long time.
@Harolds.........Ive waited up to 15 min. How long can it take?
@Kam187.......I was using FRF50 and no I did not update the radio
Did you pull the battery at all?
no i didnt take it out but would it matter since I am not updating the radio
Hiya all, I am quite desperate for help, I consider myself intermediate when it comes to dealing with android devices but I am well and truly stumped on this one.
I received a second hand streak from eBay yesterday, turned on first time and booted fine, running Steakdroid 1.9.0 by DJ Steve. I had a few issues with it reboot randomly or crashing, as it had Streakmod Recovery installed I did a full wipe all areas, reinstalled the Rom 1.9.0 and bit a factory reset on reboot from the Dell recovery menu.
All the device does now is reboot in bootloop on the dell logo it stall when it goes as far as booting or trying to load the Rom.
I ran the test in fastboot to test the internal drive as this is known to fail and both that and my SD memory passed the test.
I used fastboot and CMD to flash 4399 recovery image the OEM recovery image for the Rom Streak_104_4399_21.pkg I renamed this to update.pkg and rebooted the device into recovery where I then went to restore the original firmware (1.6) but as soon as I pressed the camera button to proceed I was greeted with a lovely black screen.
I left the device for about 2 minutes where it reset itself and just keep rebooting on the dell logo the restore did not seem to work, just to check fastboot and CMD was working as it should I went to reinstall the Streakmod Recovery image and sure enough it worked I managed to boot the device back into streakmod.
Unfortunately every time I try to install a custom rom they just do not seem to load the device simply stalls on the Dell logo because I cant seem to restore the original recovery image for the stock rom I cannot factory restore and nor will any custom rom boot.
All I have is access to fastboot and Streakmod recovery aaaah!!
If anyone can help me in the slightest I would well very, very, very much appreciate it!
As you have fastboot working, go to the wiki and download the recovery.img for the latest 360 rom, put the corresponding rom on your sd card named update.pkg and try to do a recovery by powering on device holding down volume up and down.
Flash then do a factory reset and you should be fine.
Streakmod is a great tool for flashing custom roms, not too many problems using custom roms, but you must use Streakmod with care, never use the factory reset option from within streakmod itself, this can render your phone a brick.
(InsertNameHere) said:
As you have fastboot working, go to the wiki and download the recovery.img for the latest 360 rom, put the corresponding rom on your sd card named update.pkg and try to do a recovery by powering on device holding down volume up and down.
Flash then do a factory reset and you should be fine.
Streakmod is a great tool for flashing custom roms, not too many problems using custom roms, but you must use Streakmod with care, never use the factory reset option from within streakmod itself, this can render your phone a brick.
Click to expand...
Click to collapse
Thanks for the reply here's my progress so far:
Flashed recovery image and loaded rom to SD card..... Booted into dell recovery and this is what happened
Finding update package
Opening update package
Verifying update package
Yellow bar 25%ish at this point
flashing lights
Installing Update
33%ish lights flash again
Yellow bar jumps 3/4 then fills screen, streaks screen goes blank/ off
Doesn't reboot/ cant turn on so I remove battery and switch back on and I am back to Dell logo then I get a picture of an android and another small progress bar that slowly fills and the device and it again reboots
Streak reboots again about 3 times like it is stuck in bootloop, I leave it and keep my fingers crossed I then get an animation of the Dell logo and glowing lights behind it.
Keep fingers crossed and sure enough it boots into the lock screen, I go to unlock it but it freezes and I get the flashing lights syndrome and the screen goes blank
Remove battery and switch on again, dell logo bootloop after about 8 or 9 bootloops it boots back up into the ROM above but then crashes once again...
Is it fair to say this streak has given up the ghost?
Flashing lights could mean baseband mismatch.
Try again, but be certain to use the correct recovery.img for the rom you are flashing, get the 351, 354 or 360 recovery.img that matches your choice of rom.
Make sure there is only 1 update.pkg on your microsd card, the one you want to flash, move all others, rename them or delete them. The Dell recovery always looks for update.pkg, nothing else.
Flashing lights could be something more major, but i still think its a baseband mismatch.
(InsertNameHere) said:
Flashing lights could mean baseband mismatch.
Click to expand...
Click to collapse
Honestly thats what I wanted to hear but what worries me is I downloaded the recovery and image from Wiki both relating to 360 will try flashing again I really do hope it can be fixed! Seems today is not a good day for me today many things going up the creek!
I am 75% certain if you flash it with the right update.pkg, that is a renamed 360 pkg you downloaded, you will have success.
When you flashed Streak_104_4399_21.pkg you were trying to revert to Android 1.6.
You may have to use the QDLTool to fix the Streak. I am not sure what problems trying an 1.6 build over an Android 2.2 build can cause. You may want to wait for some more feedback.
Start here for more info and try the links in my signature.
I dont believe you can downgrade directly from 2.2.x -> 1.6.
2.2.x -> 2.1 -> 1.6 might work but why are you doing this in the first place?
Just directly install 360 or the like
teaganravetta,
Does this sum up your situation?
1) you bought a used phone and it had StreakDroid 1.9.0 on it
2) because of issues with SD 1.9.0, you tried to flash Streak_104_4399_21.pkg, not realizing that SD is based on a newer stock rom
3) you then tried flashing bb 360
3) Now you are having issues with boot loops and phone won't boot?
marvin02 said:
teaganravetta,
Does this sum up your situation?
1) you bought a used phone and it had StreakDroid 1.9.0 on it
2) because of issues with SD 1.9.0, you tried to flash Streak_104_4399_21.pkg, not realizing that SD is based on a newer stock rom
3) you then tried flashing bb 360
3) Now you are having issues with boot loops and phone won't boot?
Click to expand...
Click to collapse
Yes thats exactly what happened and in that exact order I am guessing this means the worse, am going to try for the 3rd time now reflashing 360 so fingers crossed
teaganravetta said:
Yes thats exactly what happened and in that exact order I am guessing this means the worse, am going to try for the 3rd time now reflashing 360 so fingers crossed
Click to expand...
Click to collapse
I'm not going to tell you anything different than anyone else, however I am going to give you links to the exact files you need so there is no confusion.
Download this:
http://mirror2.streakdroid.com/manii/360/recovery.img
This is the recovery image for 360. Save it in the folder on your computer that has fastboot.
Now download this:
http://mirror2.streakdroid.com/manii/Streak_360_17397_00.pkg
Rename this to Update.pkg and place in the root of your SD Card. (ensure there is no other Update.pkg on your card)
Power off the phone, if not done already.
Hold the power and camera button down until you get a white screen. Click on fastboot on your phone. Wait 10 seconds.
Plug it into your computer with the usb cable.
Wait for it to say fastboot ready (or something similar).
Now flash the recovery.img using the following command (This command assumes a Windows PC):
fastboot.exe -i 0x413 flash recovery recovery.img
When both your computer and the phone says it was successful, complete, or whatever, pull the battery.
Replace the battery, hold both volume buttons along with the power button.
In the menu that opens, choose the second option. Let us know your results.
I only added this post in case their was confusion over which files were actually needed. No need for a separate baseband, dsp1, or anything else. These are all included in the pkg file.
many thanks for all the help, so far I have downloaded "QDLTool3rd_20101022_GAUSB1A130500" turned off driver signing as I am x64 all ADB drivers fine and COM ports okay have restored via this tool according to the log successfully.
Phone rebooted a few times it has paused on the Dell logo for a moment but the guide did say anything up to 10minutes for first boot so I am holding for the moment to see if this has cured it otherwise I will report back and re download the above files and try that!
It takes me a while because I am out in the sticks I only have a 60kbps download speed (yikes) I know!!
Because your first attempt at flashing a stock ROM was the Android 1.6 version I am not sure you can just flash 360 at this point. I think you have to use the QDLTool (repairtool), but I am not sure. Try searching for the procedures that were used to upgrade from 1.6.
Edit to use the QDLTool:
In this post DL under commonly downloaded tools get Fastboot/ADB utils + drivers for Streak 5/7 and Venue and QDL Tool.
Then download qdltool-tutorial.zip from this page. unzip the tutorial and open it with a browser that supports flash or other flash viewer.
After using the QDLTool let the Streak boot and then flash the 360 recovery file and the 360 ROM. You must not let the phone boot completely after flashing a different recovery or the phone will restore the one that came with the ROM currently on the phone. Read this.
You can find more info about QDLTool by searching. As I said I think that is what you need to do.
lordmorphous said:
I'm not going to tell you anything different than anyone else, however I am going to give you links to the exact files you need so there is no confusion.
Download this:
http://mirror2.streakdroid.com/manii/360/recovery.img
This is the recovery image for 360. Save it in the folder on your computer that has fastboot.
Now download this:
http://mirror2.streakdroid.com/manii/Streak_360_17397_00.pkg
Rename this to Update.pkg and place in the root of your SD Card. (ensure there is no other Update.pkg on your card)
Power off the phone, if not done already.
Hold the power and camera button down until you get a white screen. Click on fastboot on your phone. Wait 10 seconds.
Plug it into your computer with the usb cable.
Wait for it to say fastboot ready (or something similar).
Now flash the recovery.img using the following command (This command assumes a Windows PC):
fastboot.exe -i 0x413 flash recovery recovery.img
When both your computer and the phone says it was successful, complete, or whatever, pull the battery.
Replace the battery, hold both volume buttons along with the power button.
In the menu that opens, choose the second option. Let us know your results.
I only added this post in case their was confusion over which files were actually needed. No need for a separate baseband, dsp1, or anything else. These are all included in the pkg file.
Click to expand...
Click to collapse
Thanks, this got my problem solved (endless boot logo issue with Simple Droid rom), however I am left with a no cell tower reception ?
I flashed the official stock unlocked retail rom ? still no tower reception ?
Try Simple Streak 1.2 , as i had this problem yestrday , but for simple streak 1.2 everything Worked Fine , just goto its thread and follow its instructions and u wll hve 2.2.2 in 15minutes , hit thnx if this helps
Hello. I have the U8800 pro. I was trying to install one of the Jelly Bean ROMs for this phone and I completely forgot to delete a dload file from the root of the sd card. I was on the official ICS ROM from Huawei and still had a dload file from the update. It went into the update screen and was stuck halfway on step 2, didn't say update failed at all, it was just stuck on installing. . .
So I took out the battery and put it back in. When I turned the phone back on, it showed the Huawei logo and went to the update again by itself. I had to remove sd card and delete that dload folder. I put the sd card back in and when I turned the phone back on again, it showed the Huawei logo again for a few seconds and then just goes straight to the pink screen. I can't even go into recovery mode. Won't let me. I take out the battery, put it back in, turn it on, same ordeal, huawei logo, then automatic pink screen. I connect it via USB and it doesn't detect the removable drive for the system image. Nothing. My question is, is there any possible way to resolve this issue? Any way to get back into recovery? I'm really not hoping that I bricked this phone. It's a really decent phone. Thank you for your time and please reply and answer soon. I greatly appreciate it.
Booting straight into pink screen means there is no rom installed. The phone tries to install the official rom from the sd card. When it doesn't find anything, it goes into pink screen. This means you must try installing an official rom to make the phone boot. Try installing GingerBread.
rqmok said:
Booting straight into pink screen means there is no rom installed. The phone tries to install the official rom from the sd card. When it doesn't find anything, it goes into pink screen. This means you must try installing an official rom to make the phone boot. Try installing GingerBread.
Click to expand...
Click to collapse
I downloaded the official Gingerbread rom for the phone and it just said "Update failed" on the unpacking part. The sd card is completely empty. I only have the dload folder on it with the Gingerbread update. I keep trying and it just keeps telling me "Update failed." What should I do now? I'm confused to why it is failing, if there is no rom on the phone. And thank you so much for the reply, by the way.
Try hard resetting your phone:
http://www.hard-reset.com/huawei-u8800-ideos-x5-hard-reset.html
Unlock pink screen
Unlock pink screen
http://forum.xda-developers.com/showthread.php?t=1736650
My lcd screen cracked last year, so i gave phone to local service and they repaired last week. I am trying to install a new rom for days but i cant manage.
I tried cm version13 and aurora, but my torch doesnot work. EVen in camera, in flash mode. Should i again open phone and look if there is a problem or it is about software?
And other question, i cant mount my internal sd card. WHen i open es file, it only shows /sdcard, and nothing more.
Now i opening storage, total space 1.40 gb, apps 32 mb, intrnal stroage 1.02 gb and i took of external to see. In file exploerer, again i can only see sd card0. I cant see my system or anything. 1-2 years ago i could see my system.And i connect to pc, there is only one parttion. 1-2 years ago there were 2, one of internal sd other one is phone memory.
Please help me to solve this. And i mneed a rom that is only fast and using battery nicely.
Why noone helps now i cant open phone. Swm 5.0.8 cant mount sdcar sdext and i formatted data so it cant opened. How can i fix that? I want to go back to stock rom to see if there is sd card is working and myt torch isworking.
You can mount phone on pink screen and add the latest recovery from there.
rqmok said:
You can mount phone on pink screen and add the latest recovery from there.
Click to expand...
Click to collapse
Thanks rqmok. You are a great helpful person. You are trying to help me for days.
I went into pink screen. It automatically went update (i had put dload to stockr room update ,). Then i tried to open but still rebooting without oğenning.
So i went into rewcovery but i saw that it is android recovery, not cwm i installed. So i tried a lot of tgihngs.Then i installed aurora v20, but ittis interesting, i opened phone after that insstallation. It shows 2.3.5 rom, stock rom original rom.
I did not understand that.
And my flash again doesnot work. Should i give this back to the repairman to solve?
PLease looık my pictures.
pic 1 shows my first original screen. It was cracked under door and there were a lot of scratchs on phone screen. When i opened phone ,i could see scracths. So i bought from eb ay and gave a repairer. He made it. I dont know if it was well.
Then i put my foot on it slowly, but it again cracked. But i could not see scratchs. When i opened the phone, i could only see light not scratchs. So igave to same repairer without buying a screen. Pic 2 shows my 2. screen that came from ebay, there are no sctracts.
Now , my flash is not working and torch. I tried in a lot of roms. IT is not about software i think. And i have to press a lot of times to enable phone.
What do you say about that?
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
rqmok said:
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
Click to expand...
Click to collapse
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Cursed Chico said:
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Click to expand...
Click to collapse
You can't view your sdcard files from pink screen.
If you are able to install a ROM and make it work then that will be good. But, you have said that this happened after replacing the screen. So, if you can open the phone and check for any disconnected cables that need to be reconnected then you should fix them. There should be a video on YouTube on how to do this. If you cannot do it then you will have to get it repaired.
I dont have screwdriver, i have 3mm, it doesnot work.
But after screen replacement, i used aurora for 7-8 days. Then i thought partition was wrong and deleted wiped. Now but i cant install a rom. İ nstall aurora but it opens 2.3.5 with pink screen.
What size screwdriver do i need?
Now in android recovery i wiped daya, wip cache and then restarted, then trierd to update on pink scrteen, it gave error. So again wiped datya. Now i could open it. it shows 2.3.5. İf i restart, it will be deleted again i guess. What should i do? Wİthout power off, update? I will try to install cwm
I tried to replace recoveryimg but i failed. Because ihad to install superuser, so it rebooted and phone again cant boot up, restarting a lot of times. I dont understand what the reason is
Again, i did revocery android, wipe data and cache , then rstarted. After a few boots, 2.3.5 opened. Then i again restarted and now it is trying to start again 10. times. I n my ext sd, there are dload and other zips, that can be reason? I dont want to delete those because if i delete, it will be hard for me to insatall those files
Now it is restarted, huaewi logo appears, then pink and colurful fireworkds, than black svcreen and contunes....
After wipping, i restart and it is fine, i could go into 2.3.5. But when i again restart, smetimes it again opens but as soon as desktop opening, it starts to begin,
android stops working
calendar stops working
a lot of windows. I click end activity but it repeats alot of times.
So, my original stcok is damaged or what?
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
rqmok said:
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
Click to expand...
Click to collapse
Not only apss, android system also huawei etc. I cant even click restart button to restart phone because of popups windows.
So when i click restart, sometimes it open 3. times but still apps closing, then restarting and cant show huawei logo. and botoing up in inifinite loop.
Stock partition, i will try but i wont be able to do it. I donthave cwm and in android recovery i t doesnot accept, cant mount sd card. I can only go into android recover, can only do wipe data cache, cant mount anything. Theen only can restart and sometimes i try to update in pink screen but failed in half of 1/2. So, how can i go to stock partition without restarting phone while open?
I think the 2.3.5 rom i downloaded (Portugal or Korean i dont remember) is can be damaged or wrong. But i think i cant change that too. I am locked.
What i should do, i dont know.
Still cant do. I go into android recovery, wipe data and then after 2-3 restart, it boots. Then if i restart, there are a lot of windows appear showingstop activities. So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. It could make updates. But after updates, again could not start. After loading huawei logo, it restarts.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart .
Please help.