Database Users

Call breaks up using Carkit & Speakerphone

Hi,
I have the TyTn and when I connect it via Bluetooth to my Nokia CK7W carkit callers complain that my voice breaks up and they only hear every 2nd word or so. I also get the same complaints when using the handsfree inbuilt speakerphone, and that my voice fades in and out.
Yet when I talk normally with the phone to my ear the problem isn't there.
I've tried raising my voice and speaking closer to the mic in both cases but this doesn't work.
Any suggestions?
Tnx
Ari

Might be similair to the issues other users and I are having.
See the following for more info:
http://forum.xda-developers.com/viewtopic.php?t=61594
http://forum.xda-developers.com/viewtopic.php?t=60225

Thanks for the reply. Unfortunately it's not related to the other forums. My phone keeps the bluetooth connection and both incoming and outgoing voices can be heard.
I've heard it for myself and it sounds like i'm in a bad reception area. What's really puzzling is that it also happens when I speak on the phone with the speakerphone activated, yet when I place the phone right to my mouth then the problem goes away, so i'm thinking it's something to do with the mic switching off to cancel any echo?

See this post
http://forum.xda-developers.com/showthread.php?p=1834544#post1834544

VC 1.6 and Bluetooth, revisited...

Hi Again,
RE: the old Voice Command issue with the Touch....When I am using my bluetooth, I hit the call button on the earpiece and get the tone. I say, for ex., "call home", and get the usual voice response, "Call Home?", to which I respond yes. Then i just get the end tone. It doesn't dial the number. Works fine without ther bluetooth. My understanding was VC didn't work at all with BT, but now that I'm this close, I'm wondering if there is a fix...Also, not to beat a dead horse, but anything new on voice notifications, especially Email and appointments. I really miss that from my old BlackJack with VC 1.5....
Thanks all,
Gary

Bluetooth and Voice Command 1.6 work perfectly on my Touch Cruise. (Although, it might be causing an issue with A2DP...I have to investigate to make sure though.). Eitherway, the point of my post was to let you know that VC 1.6 does over bluetooth, with not only commands, but also voice notifications coming over properly. So maybe the problem is your Radio ROM? Have you tried any others? Do the Radio ROMs from the MSM7200 models work for you guys with the MSM7500? If so, the most upto date Touch Cruise Radio ROM could do the trick for you.

Similar problem here.
With my stock touch, VC1.6 works better then with previous devices, but still not 100%.
I can initiate calls by pressing the button on my headset and, unlike devices of the past, notifications can be heard via the headset.
Where I have a problem, is in VC recognizing my response to confirmations. Anotherwords, if I have confirmations turned on for voice dialing, and say "dial Michele at home", VC will come back and confirm "dial Michele at home?". But when I acknowledge and say "yes", it does not recognize this, and times out.
If I turn confirmations off completely, everything works fine.

You can actually hear the confirmations lol? When I tried it I could barely hear the confirmations.

Dew.man,
How do you turn off confirmations? I can see the check boxes for voice enabling, and calendar reminders, but nothing about disabling the confirmations. (I have ver. 1.60.4622, is there a newer one?) Also, (for mindfrost) regarding the volume thru the bluetooth, there is a fix for that which works great. I'm at work and I'd have to look for it, but it is probably on this site . And the ever popular "audiopara" fix works GREAT for all other volume issues. Just drop the folder in the phone's windows directory. It is available on this site as well.
Gary

garpt said:
Dew.man,
How do you turn off confirmations? I can see the check boxes for voice enabling, and calendar reminders, but nothing about disabling the confirmations. (I have ver. 1.60.4622, is there a newer one?) Also, (for mindfrost) regarding the volume thru the bluetooth, there is a fix for that which works great. I'm at work and I'd have to look for it, but it is probably on this site . And the ever popular "audiopara" fix works GREAT for all other volume issues. Just drop the folder in the phone's windows directory. It is available on this site as well.
Gary
Click to expand...
Click to collapse
I would love to know the fix for the BT issue, please post.

After months of tweaking (including Jetware, that doesn't even have direct support for Touch), I did finally get MS VC working well on my Touch, even with voice confirmation and all. But it would take out my A2DP stereo capability time and time again. I implemented every other tweak and tip out there. Besides A2DP being unusable, it would also take out being to listen to Sprint TV over a BT headphone, which was a real bummer.
About 3 months ago I finally gave up VC. I had to ask what were my must haves, and they were rock solid A2DP to play my Rhapsody to-go tracks on the memory card with my two BT stereo headphones, and listening to SprintTV over the BT mono or stereo. Voice command was third on the list, and I'd just had to survive with the mickey-mouse voice dialing that came with the Touch... I uninstalled the MS VC for good.
Now everything is rock solid, and I much regret the literally hundreds of hours of my life I wasted on VC, not to mention my $40 bucks.

For those of us who don't use stereo bluetooth.. ie, myself I'd love to know what the fix was for getting the confirmation volume corrected. It'd make voice dialing in noisy places (such as while driving, in airports, etc) a whole lot easier. If anyone in this thread recalls, what was the solution to that?

Answer without using bluetooth device

If I have a bluetooth device connected to my XV-6800, is there a setting or something I can do that will allow me to answer the phone with the call button on the phone, but have it connect to the bluetooth device? Right now if I hit the call button, it only goes through the phones speaker as if the bluetooth device was not connected. For me to answer a call using the bluetooth device, I have to hit the button on the bluetooth device.
Thanks,
Jeff

That's really strange. I know that I don't have the same phone as you (I have touch Elf). I have noticed this. When I have my device connected to bluetooth headset or my handsfree car kit, I can still hit the green call button to anser the phone when I get a call and the call is still transmitted to my bluetooth. I can even still make a call by hitting the green call button, dialing the number and still all through bluetooth.
It sounds like your device is not associating properly with the bluetooth device. Go into your bluetooth settings and check to make sure that you are connected properly for hands free - Go to settings - bluetooth and click on your device to make sure that hands free is checked.
I have also noticed that on a rare occasion, my bluetooth does not connect properly and although paired, does not transmit and sound did come through phone when it shouldn't have. To fix this, I did a soft reset and all was good. It happened to me about three times since I bought the phone in Dec 2007.

hotrod101 said:
That's really strange. I know that I don't have the same phone as you (I have touch Elf). I have noticed this. When I have my device connected to bluetooth headset or my handsfree car kit, I can still hit the green call button to anser the phone when I get a call and the call is still transmitted to my bluetooth. I can even still make a call by hitting the green call button, dialing the number and still all through bluetooth.
It sounds like your device is not associating properly with the bluetooth device. Go into your bluetooth settings and check to make sure that you are connected properly for hands free - Go to settings - bluetooth and click on your device to make sure that hands free is checked.
I have also noticed that on a rare occasion, my bluetooth does not connect properly and although paired, does not transmit and sound did come through phone when it shouldn't have. To fix this, I did a soft reset and all was good. It happened to me about three times since I bought the phone in Dec 2007.
Click to expand...
Click to collapse
The bluetooth is properly connected. When I make a call and hit the green call button, it does go through the bluetooth device. It is only when answering a call it does not go through the bluetooth device when I hit the green call button. Yes, very strange. Oh well, I was hoping somebody might have some insight.
Jeff

jeffgman said:
The bluetooth is properly connected. When I make a call and hit the green call button, it does go through the bluetooth device. It is only when answering a call it does not go through the bluetooth device when I hit the green call button. Yes, very strange. Oh well, I was hoping somebody might have some insight.
Jeff
Click to expand...
Click to collapse
What radio and Windows ROM are you using? I know that some of the different ones fixed some BT issues. When my headset is connected it always goes to my headset no matter what I push. Sometimes I have it in my pocket and forget and then can't hear anything on the phone. I believe you can force it to go to your headset after answering the call though.

jambrose said:
What radio and Windows ROM are you using? I know that some of the different ones fixed some BT issues. When my headset is connected it always goes to my headset no matter what I push. Sometimes I have it in my pocket and forget and then can't hear anything on the phone. I believe you can force it to go to your headset after answering the call though.
Click to expand...
Click to collapse
I am currently using DCD 3.2.6 with radio 3.37.75. To be honest I am not sure I have tried it with this combination. But, I have had the problem with a DCD rom, I just don't remember which radio.

My phone has always bypassed the bluetooth earpiece if I press the answer button on the phone and not the button on the earpiece. It did it from day one with the stock verizon rom and it still does it with my custom dcd rom.
I like the option of bypassing the earpiece to answer a call, especially in a crowd. Also I have the incoming calls announced thru the earpiece. This allows me to know who is calling without even looking at the phone or touching it to answer it thru the earpiece.
This is my insight on this. I hope this helps.

Are you using Voice Command? Is the sound very low?
tommvee said:
My phone has always bypassed the bluetooth earpiece if I press the answer button on the phone and not the button on the earpiece. It did it from day one with the stock verizon rom and it still does it with my custom dcd rom.
I like the option of bypassing the earpiece to answer a call, especially in a crowd. Also I have the incoming calls announced thru the earpiece. This allows me to know who is calling without even looking at the phone or touching it to answer it thru the earpiece.
This is my insight on this. I hope this helps.
Click to expand...
Click to collapse

jeffgman said:
If I have a bluetooth device connected to my XV-6800, is there a setting or something I can do that will allow me to answer the phone with the call button on the phone, but have it connect to the bluetooth device? Right now if I hit the call button, it only goes through the phones speaker as if the bluetooth device was not connected. For me to answer a call using the bluetooth device, I have to hit the button on the bluetooth device.
Thanks,
Jeff
Click to expand...
Click to collapse
Mine operates the same way. I don't beleive this is a "flaw", and may vary by type of bluetooth device being used. OP is looking for a way to override this setting / feature if anyone knows. Personally, I like the option of taking it on the phone for privacy reasons as my BT device is through the car speakers.

ande8150 said:
Mine operates the same way. I don't beleive this is a "flaw", and may vary by type of bluetooth device being used. OP is looking for a way to override this setting / feature if anyone knows. Personally, I like the option of taking it on the phone for privacy reasons as my BT device is through the car speakers.
Click to expand...
Click to collapse
I agree, I don't necessarily think it is a flaw. I would prefer to have mine answer with the bluetooth if I hit the green call button. I was just wondering if there is a setting some where that I am overlooking to have it the way I would prefer.
I just tried it again with the DCD 3.2.6 and 3.37.75 radio. As has been mentioned above, it does not appear to be related to a rom or radio, it is a feature of the phone.
A friend of mine has an iphone, and when they get a phone with a bluetooth earpiece enabled, they get options on the screen which say answer, answer on phone, or ignore. Or something along those lines. I like having those options, but understand if it is not available on the 6800.
Thanks for all of the replies.
Jeff

[Q] Jabra Extreme2 with Epic 4G causes phone to freeze

I have searched and searched and I am actually currently waiting two new Jabra Extreme2 headsets from Jabra.... but I don't have a lot of faith that the problem will be solved.
The scenario is simple.. Calling and listening to music is fine. The issue is on incoming calls, and only MOST of the time.
If the headset is on and connected (bluetooth) the ringtone will start to stutter and the announcement in the headset will be "call from " and a number instead of the actual name in the contact list. At this point the phone will be frozen. The call will roll to voicemail. The only way to shut the headphone up from repeating the number continuously is to turn it off. Once the headset is off, you can usually get to the pulldown and turn off bluetooth. It will take awhile (minute or two) to release, but it will. At this point you can turn on the headset and turn on bluetooth again and make a call without issue. Maybe even receive a call... but about 8 out of 10 calls will result in the above.
My wife and I each have an Epic 4g and a Jabra Extreme2 headset. The issue is the same on both phones. We have older Jabra BT530 headsets that other than sounding like crap. (old bluetooth tech) work great, no issues.
I'm not convinced the issue is the headset. I mean really, there is no "software" for the headset. It's just a bluetooth connection, so why is the phone freezing? I tried different ringtones as I thought that might be the issue, but it isn't.
Does anyone have any thoughts or insight, or any idea if it could actually be the headset causing the phone to freeze.
Also, does anyone know how to disable the PBAB as that seems to be related but without being able to disable it, I can't confirm.
Any help or insight would be greatly appreciated. Anyone using the Extreme2 ?

Well, I have a Moto Finiti Bluetooth and I am not having any of the issues you mentioned so far. Thankfully its connecting better than earlier ROM releases on my Epic
Sent from my SPH-D710 using xda premium

[Q] MX Quad bluetooth assistance needed

Hi all. I need some expert help. I am not as technical, but I am willing to try. My son helped me get the MX quad as I wanted a high end Android that I could hold in one hand to replace my ageing Samsung Vibrant. I got the phone a few days ago, and it will not connect properly to my motorola H730 bluetooth earpiece. It will receive, but not allow me to make calls with the earpiece. I get a double beep when I try to press the button to dial by voice on the earpiece. I can hold the button and get it to redial only. Bluetooth and voice dialing is a must as I am on the road a lot. No problems with my headset and my Samsung Vibrant, any ideas? When connected the bluetooth settings states "connected to phone audio"
PLEASE HELP Thanks
Note--for what it is worth when the phone and earpiece auto paired, although the bluetooth device prompted for the 0000 code, before I could enter it the earpiece announced that it was connected and the phone indicated that it was paired and connected.

Wish I could tell you what's wrong there but I can't.
Have you tried asking the folks over at the official Meizu forums yet?
I've seen a bunch of bluetooth related discussions there.

Bluetooth issues
MrColdbird said:
Wish I could tell you what's wrong there but I can't.
Have you tried asking the folks over at the official Meizu forums yet?
I've seen a bunch of bluetooth related discussions there.
Click to expand...
Click to collapse
I might not be at the correct Meizu help forum. Which one should I contact? I contacted one and received several replies that the phone does not support voice dialing and to download an app. I had already downloaded Vlingo, which works, but requires touching the phone--so not really handsfree, and not really through the bluetooth. Am I incorrect in expecting a phone running ICS with bluetooth 2.1+EDP to be able to both receive calls via bluetooth and initiate calls thru voice dilaing via bluetooth? I read all the reviews before I purchased from HK, and no one indicated that bluetooth only received calls. I can live with the other limitations as I am not a real customize, nerdy type; but I do need my bluetooth to phone home when I say so!!!

forum.meizu.com ?