Related
Hi guys,
I'm on my second transformer in a week and going back and forth between keeping it or going for another replacement. Let me address my question though.
Can those of you with this device confirm whether or not you have a perfectly constructed Transformer? What I mean by that, for the most part, is that it's devoid of the various hardware defects that people are complaining about. These include poor touch response on the screen (having to double touch, or it doesn't work at all), speaker balance issues, light bleed, and screen-to-bezel separation.
My first TF from Amazon had the speaker issue where the right was much louder than the left. However, that was the ONLY problem with it. There was no light bleed and the screen, from what I can remember, did not have any noticeable separation.
My replacement came from Newegg, and the good news is that the speakers both work great. The bad news is I have a SLIGHT light bleed down in the UI menu at the bottom of the screen when in landscape mode, and I would say a moderate issue of the screen being separated from the bezel. A lot of people seemed to not notice this second issue until they starting looking closer at their own TFs. Basically, run your finger around that little black line that links your screen to the case. Is it seamless with the glass or does it stick out?
I'm beginning to question my OCD at this point, but if people really can confirm for me they have 0 light bleed and seamless screens I think I will keep returning until I can get what I would consider a perfect replacement.
All feedback appreciated! Thanks!
ria_drizzt said:
Hi guys,
I'm on my second transformer in a week and going back and forth between keeping it or going for another replacement. Let me address my question though.
Can those of you with this device confirm whether or not you have a perfectly constructed Transformer? What I mean by that, for the most part, is that it's devoid of the various hardware defects that people are complaining about. These include poor touch response on the screen (having to double touch, or it doesn't work at all), speaker balance issues, light bleed, and screen-to-bezel separation.
My first TF from Amazon had the speaker issue where the right was much louder than the left. However, that was the ONLY problem with it. There was no light bleed and the screen, from what I can remember, did not have any noticeable separation.
My replacement came from Newegg, and the good news is that the speakers both work great. The bad news is I have a SLIGHT light bleed down in the UI menu at the bottom of the screen when in landscape mode, and I would say a moderate issue of the screen being separated from the bezel. A lot of people seemed to not notice this second issue until they starting looking closer at their own TFs. Basically, run your finger around that little black line that links your screen to the case. Is it seamless with the glass or does it stick out?
I'm beginning to question my OCD at this point, but if people really can confirm for me they have 0 light bleed and seamless screens I think I will keep returning until I can get what I would consider a perfect replacement.
All feedback appreciated! Thanks!
Click to expand...
Click to collapse
Don't exchange right away. Wait till the last minute (of your return period) so you'll get the latest batch.
You know it is a file config fix for the speakers? You may be kicking yourself if that was your only problem and you now have one with lightbleed!
Paradaz, I found that out after sending it back to Amazon. :-(
I am kicking myself and doing it pretty hard.
I also found out I get the pleasure of paying shipping costs because I bought my second one through Newegg (Amazon was out so could only refund at the time).
I have decided the screen separation is making me too nervous, so here's to hoping the 3rd time is a charm.
Mine should arrive tomorrow or Tuesday I bought it through Wal-Mart .com. I'll report back if I see any issues mentioned. These things are selling like hot cakes though, it pretty amazing.
Mine should show up from Amazon tomorrow and I am all paranoid by everyone having issues so either I will be back and sobbing about it or I might not be heard from for a week.
I got my third from New Egg a week or so ago and so far it is virtually flawless. I say virtually because there is the tiniest bit of light bleed along the bottom but it is so slight that its unnoticeable unless pointed out (even on a black screen).
I'm on number 3 also. build is tighter than the other 2, but the first was tight in the beginning too. still has bleed and speaker balance issues. I've done the tweaks and used volume+. my only fear is blowing a speaker now.
hoping I have a keeper this time.
Mine seems perfect to me. I must be one of the rare lucky ones.
Sent from my Transformer TF101 using Tapatalk
No issues here, have owned my TF for a week now.
-No random SODs
-No light bleed
-No speaker issues
-No touch response problems
-No creaky bezel issues
Guess I lucked out?
Each time I think I've finally convinced myself that I am going to keep my current Transformer, I stumble upon one of these threads. As much as I love the device, my OCD has me looking for defects whenever I have it in my hands. I received mine from Newegg Friday and this is what I've noticed so far:
- Minor light bleed along the bottom when in landscape mode. Nothing too serious but definitely noticeable when in a dark room and the bottom of the screen is black. I tend to think this is going to be the case with all these screens.
- Right speaker louder than the left. Seems almost universal. I ran a Left/Right speaker test and, although it isn't an overwhelming difference, the right is clearly louder. Perhaps this is simply a matter of the openings/slots on the right side?
- One speck of dust under the screen in the upper left corner an inch below the Asus logo.
- What appears to be a dead/stuck Pixel in the right corner. Didn't notice this initially as it only appears clearly against certain backgrounds. When I ran a pixel test, there was a black dot about the size of a pin point against bright blue backgrounds in that spot. Very hard to notice against other colors.
- Screen separation: I notice no defect on that front. Maybe the slightest separation on the right side where the mini HDMI port is... the main problem is me looking like a moron every time my girlfriend walks in the room and I'm intently starting at a turned off tablet.
I'm debating returning it to Newegg but then I worry that it is mostly a matter of me obsessively looking to find fault and that I'll end up with a worse one if I exchange it. I haven't returned anything to Newegg in years - you said they required the buyer to pay shipping?
Pisugtooq said:
the main problem is me looking like a moron every time my girlfriend walks in the room and I'm intently starting at a turned off tablet.
Click to expand...
Click to collapse
lol when i read that i laughed hard
had a scare with mine, couldnt recharge it. But I was rooted, maybe it had something to do with it. The charger itself might have had a problem, but its ok now. Everything else is perfect. I've had mine for almost 3 weeks and it still works flawlessly. I show everyone my device and they are amazed
Pisugtooq said:
Each time I think I've finally convinced myself that I am going to keep my current Transformer, I stumble upon one of these threads. As much as I love the device, my OCD has me looking for defects whenever I have it in my hands. I received mine from Newegg Friday and this is what I've noticed so far:
- Minor light bleed along the bottom when in landscape mode. Nothing too serious but definitely noticeable when in a dark room and the bottom of the screen is black. I tend to think this is going to be the case with all these screens.
- Right speaker louder than the left. Seems almost universal. I ran a Left/Right speaker test and, although it isn't an overwhelming difference, the right is clearly louder. Perhaps this is simply a matter of the openings/slots on the right side?
- One speck of dust under the screen in the upper left corner an inch below the Asus logo.
- What appears to be a dead/stuck Pixel in the right corner. Didn't notice this initially as it only appears clearly against certain backgrounds. When I ran a pixel test, there was a black dot about the size of a pin point against bright blue backgrounds in that spot. Very hard to notice against other colors.
- Screen separation: I notice no defect on that front. Maybe the slightest separation on the right side where the mini HDMI port is... the main problem is me looking like a moron every time my girlfriend walks in the room and I'm intently starting at a turned off tablet.
I'm debating returning it to Newegg but then I worry that it is mostly a matter of me obsessively looking to find fault and that I'll end up with a worse one if I exchange it. I haven't returned anything to Newegg in years - you said they required the buyer to pay shipping?
Click to expand...
Click to collapse
I would return this in an instant. The dust and stuck pixel would drive me insane!
Each time I think I've finally convinced myself that I am going to keep my current Transformer, I stumble upon one of these threads. As much as I love the device, my OCD has me looking for defects whenever I have it in my hands. I received mine from Newegg Friday and this is what I've noticed so far:
- Minor light bleed along the bottom when in landscape mode. Nothing too serious but definitely noticeable when in a dark room and the bottom of the screen is black. I tend to think this is going to be the case with all these screens.
- Right speaker louder than the left. Seems almost universal. I ran a Left/Right speaker test and, although it isn't an overwhelming difference, the right is clearly louder. Perhaps this is simply a matter of the openings/slots on the right side?
- One speck of dust under the screen in the upper left corner by the Asus logo.
- What appears to be a dead/stuck Pixel in the right corner. Didn't notice this initially as it only appears against certain backgrounds. However, when I run a pixel test, it is visible against certain backgrounds.
- Screen separation: I notice no defect on that front. Maybe the slightest separation on the right side where the mini HDMI port is... the main problem is me looking like a moron every time my girlfriend walks in the room and I'm intently starting at a turned off tablet.
I'm debating returning it to Newegg but then I worry that it is mostly a matter of me obsessively looking to find fault and that I'll end up with a worse one if I exchange it. I haven't returned anything to Newegg in years - you said they required the buyer to pay shipping?
hauj0bb said:
No issues here, have owned my TF for a week now.
-No random SODs
-No light bleed
-No speaker issues
-No touch response problems
-No creaky bezel issues
Guess I lucked out?
Click to expand...
Click to collapse
Mine too, and I'll add no battery drain issue.
Sent from my Transformer TF101 using XDA Premium App
madsquabbles said:
I'm on number 3 also. build is tighter than the other 2, but the first was tight in the beginning too. still has bleed and speaker balance issues. I've done the tweaks and used volume+. my only fear is blowing a speaker now.
hoping I have a keeper this time.
Click to expand...
Click to collapse
I'm on number 4. Just got another 1 replacement from amazon yesterday, the build quality got better from the last 2 i got but this new 1 has worse light bleeding out of the 4 i got. I'm still thinking if i should keep the 3rd one i got and return the new one i just got from amazon or just return everything and get the samsung. Hard decision because i really like the transformer but the light bleeding is kind of annoying
ria_drizzt said:
Hi guys,
I'm on my second transformer in a week and going back and forth between keeping it or going for another replacement. Let me address my question though.
Can those of you with this device confirm whether or not you have a perfectly constructed Transformer? What I mean by that, for the most part, is that it's devoid of the various hardware defects that people are complaining about. These include poor touch response on the screen (having to double touch, or it doesn't work at all), speaker balance issues, light bleed, and screen-to-bezel separation.
My first TF from Amazon had the speaker issue where the right was much louder than the left. However, that was the ONLY problem with it. There was no light bleed and the screen, from what I can remember, did not have any noticeable separation.
My replacement came from Newegg, and the good news is that the speakers both work great. The bad news is I have a SLIGHT light bleed down in the UI menu at the bottom of the screen when in landscape mode, and I would say a moderate issue of the screen being separated from the bezel. A lot of people seemed to not notice this second issue until they starting looking closer at their own TFs. Basically, run your finger around that little black line that links your screen to the case. Is it seamless with the glass or does it stick out?
I'm beginning to question my OCD at this point, but if people really can confirm for me they have 0 light bleed and seamless screens I think I will keep returning until I can get what I would consider a perfect replacement.
All feedback appreciated! Thanks!
Click to expand...
Click to collapse
I've received two units that I've opened (the others were sold unopened).
Both units have no issues beyond *extremely* minimal light bleed that is normal on any tablet screen, and not obtrusive in the least. One has a very slight gap at one short point in the bezel, barely twice the width of a human hair, if that.
You'd have to be beyond OCD to be unhappy with build quality on either of my tabs. And I didn't return any to get them.
But frankly I think plenty of people *are* beyond OCD, and expect a level of perfection that's simply not realistic.
It seems to be quite an issue, with the defected hardware. my came with a problematic power button which got worse with every use. now I can't lock/unlock the screen, can't turn it off and If I do manage to turn it off the only way to boot it would be to connect it to power. Today hopefully I will get it replaced.
Mine is perfect. I had a light cracking on the right side the first weeks, but it is gone now. I am very happy with my transformer. Browser scrolling could be better .
Nothing to complain.
Has anybody else noticed a dark patch on the edge of their screen? Along the top side of my screen, I can see it going off white when browsing a website in portrait mode for example.
It's like the back light isn't working properly there or something. Anybody else got this, should I get a replacement?
It's not hugely visible but it's noticeable on a white screen at any brightness level
Idk, it's up to you. I have light bleed in my right hand corner that is always visible, unless your in a well lit room on 0% brightness. I can't decide whether or not I want to send mine back though because of how common these backlighting issues seem to be.
Yeah. Mine is flawless otherwise. Its so barely noticeable I think I'll just get used to it.
Same ha ha, other people can't even spot it when i point it out to them on auto-brightness.
Yes, I noticed mine right away, but like others have said, its hardly noticeable. It doesn't bother me at all...
Sent from my Nexus 10 baby!
Same thing here. Most noticeable on a solid white background. I'm starting to think it's not a lighting problem but something to do with the way the panel is manufactured. If I hold the tablet in landscape so it's perpendicular to my face with my eyes lined up with the camera, the brightness is even across the panel. As soon as I tilt the bottom towards me, the brightness falls along the top edge. Makes it seem more like a viewing angle issue related to the way the layers are assembled or maybe a difference in pressure on the panel along that edge.
I decided to live with it because it's very rare that I have an app running in full screen that puts a light background across that area.
Same issue for me as well
jtown said:
Same thing here. Most noticeable on a solid white background. I'm starting to think it's not a lighting problem but something to do with the way the panel is manufactured. If I hold the tablet in landscape so it's perpendicular to my face with my eyes lined up with the camera, the brightness is even across the panel. As soon as I tilt the bottom towards me, the brightness falls along the top edge. Makes it seem more like a viewing angle issue related to the way the layers are assembled or maybe a difference in pressure on the panel along that edge.
I decided to live with it because it's very rare that I have an app running in full screen that puts a light background across that area.
Click to expand...
Click to collapse
I had the same issue with my first unit, did RMA and got second one. Second one had the exact same issue. Finally decided to get refund. The play store customer support said that there were few people reporting it already. This might be a design issue as well- the way device is tapered differently at the edges(backlight might not be aligned properly), two strong magnets near camera etc. Just speculating.
Dark patch here too. RMA process underway. 1/3 of screen has yellow tint. Noticeable when reading on white background. Annoyance.
boominski said:
Dark patch here too. RMA process underway. 1/3 of screen has yellow tint. Noticeable when reading on white background. Annoyance.
Click to expand...
Click to collapse
Keep us posted on the replacement device!
Same problem here. I received my Nexus 10 yesterday and notice dimming primarily (exclusively?) along the long edges. While reading a web page with a white background in portrait mode I found myself wondering if chrome was adding a gradient to the edges for some stylistic effect, but realized that made no sense. I observed the same problem with Firefox, and then I installed a screen testing app and observed the dimming with a solid white screen.
It sounds like this is probably a manufacturing/design error. Now I have to decide whether it's worth the rigmarole of exchanging the device, probably to no effect. I guess this is the risk you take when purchasing a device sight-unseen.
If you bought it from a store it would still be unseen, since it would be in the box. I had the same problem with the iPad 3. It took me three exchanges to get one with an acceptable screen. All of them had dark, blotchy, yellow patches. By all accounts it's due to the adhesive glue they use. We shall see what the replacement brings. Order is currently at the 'pending' stage.
I also have this on my screen. Right side when in portrait mode. You can't see it in landscape, which is weird. My wife and I have decided to keep it, though, as everything else about it is perfect. Plus, this defect, if you want to call it that, does not detract from our enjoyment and uses.
Sent from my Nexus 10 using Tapatalk HD
I don't have a dark patch on mine, I just received it yesterday.
boominski said:
If you bought it from a store it would still be unseen.
Click to expand...
Click to collapse
To clarify, I meant that I'd never had the opportunity to use *any* Nexus 10 in person. Had I done so, and noticed the dim edge, it would have at least raised the possibility that there was a design or manufacturing issue.
Speaking of which, I examined an in-store Nook HD+ display unit yesterday and what do you know: it had the same dim edge issue.
By the way, where did you hear about the adhesive glue explanation?
jmcharles said:
I also have this on my screen. Right side when in portrait mode. You can't see it in landscape, which is weird. My wife and I have decided to keep it, though, as everything else about it is perfect. Plus, this defect, if you want to call it that, does not detract from our enjoyment and uses.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
"Right side" doesn't really tell us anything haha.
eallan said:
"Right side" doesn't really tell us anything haha.
Click to expand...
Click to collapse
Very well. Same side as the camera.
Sent from my Nexus 10 using Tapatalk HD
jmcharles said:
Very well. Same side as the camera.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Mine has--I assume--the same dimness along the entire length starting about 1/4" from the bezel along the "top" camera edge. It is actually somewhat distracting when reading a book in portrait mode. If I flip the screen around so that the dimness is on the left edge, for some reason I find it much less annoying. Unsure if this is a warranty replacement issue though. I haven't found another Nexus10 to see in person yet.
deisner said:
By the way, where did you hear about the adhesive glue explanation?
Click to expand...
Click to collapse
It was all over the iPad forums when the iPad3 came out. Plenty of people with dodgy screens. Some reported success in leaving brightness turned up to max and plugged in for 24hrs etc to dry. But may have been placebo. It could also be an entirely different cause other than adhesive. After all, what do I know? In any case, mine's heading back, but the replacement is still stuck on 'pending'
I had a rare bit of luck. Somebody sat next to me on the bus yesterday evening and pulled out an oddly familiar black tablet. I explained the problem I was having and asked if I could examine his Nexus 10. His device had a perfect display, with no detectable dimming near the edges. So the issue appears to be a manufacturing defect, not a design flaw, and something that could in principle be solved with a replacement unit.
I called Google last night and have my RMA email. I'll ship it off this weekend.
deisner said:
I had a rare bit of luck. Somebody sat next to me on the bus yesterday evening and pulled out an oddly familiar black tablet. I explained the problem I was having and asked if I could examine his Nexus 10. His device had a perfect display, with no detectable dimming near the edges. So the issue appears to be a manufacturing defect, not a design flaw, and something that could in principle be solved with a replacement unit.
I called Google last night and have my RMA email. I'll ship it off this weekend.
Click to expand...
Click to collapse
I would love it if you would come back and post if the replacement has or does not have the issue.
So the Nexus 4’s potentially quality screen has crappy screen issues. There. I said it.
What I mean is that it’s a GREAT screen in some ways (resolution mainly) but it’s let down by what seems to be noticeably poor quality/manufacturing.
Why do I say this? Well, it’s been my experience that the Nexus 4 (in general) has a chronic problem with significantly poor screen uniformity for both colour and brightness. I ordered my first phone on the 13th December 2012 and as soon as it arrived I was pretty excited at finally getting a new phone (upgrading from Galaxy S1 the N4 is a beautiful beast).
When I booted it up and started using it I immediately got a sinking feeling as I realised that the bottom third of the phone had a slight but easily noticeable yellow gradient tint to it along with the left edge and the right edge was grey/dingy about a half a centimetre in. The left side and bottom third were also noticeably brighter than the right side of the phone. I’ve illustrated this in the attached pic. It’s all fairly subtle – but it’s definitely there and is easy to see.
Since I use (like most people I guess) quite a few apps that have white or solid colour backgrounds (gmail, currents, google books, email, messaging, chrome etc) – this lack of uniformity really made things look crappy in a not spectacular but just “sub-par” way unless I was viewing something which was a picture or video or filled the screen where it wasn’t noticeable.
So I called Google Play and told them about the problem and they arranged for a return.
When I got my replacement I booted it up and immediately, even before getting past the X logo animation noticed a big spot of light bleed at the top right. *Very* easy to see and my heart sank.
There on in I opened up the Mail app and closed the keyboard so I got a nice, mainly white screen. Again I noticed the same issue with the yellowing tint to the bottom and left but this time it was *more* noticeable.
To cut this long story short I’ve now sent back 3 devices for this issue, about to send back my 4th and my 5th should arrive tomorrow. I’m not holding out much hope.
I’ve seen this exact same issue on about 4 other Nexus 4’s in shops in the UK (Carphone Warehouse, O2) and while there looked at the HTC One X, iPhone 5 and the new Lumia phones from Nokia running Windows Phone 8. Those phones in particular (with LCD screen tech too) didn’t have these issues *at all* as far as I could tell. In fact the HTC One X screen looked to me to be flawless, as did the Lumia 820 and 920. If I could put the screen from the One X into the N4, I would. Sadly, not gonna happen. Sadly I don’t want the One X but do want an N4. P.S. I know LG manufacture their own displays.
Now I’m NOT claiming to speak for ALL N4’s (why I’ve started this thread) but I do believe that it cannot be a coincidence that ALL the N4’s *except one* showed this issue. I believe that LG simply manufacture the screens in such a way that they invariably have these tinting and brightness uniformity inconsistencies and that because most people don’t care, they don’t care.
********What I’d like is to ask if people with an N4 they’re happy with could do the following and provide the following info:
*Open the Mail app and close the keyboard (press down arrow at bottom). Look at the white of the screen and see if there is any edge or part of the screen that is noticeably *brighter* or *more yellow*. Are there any areas of the screen that are noticeably darker or duller? Do this for different brightnesses (low and fairly high). What do you see? Any yellow tint? Any inconsistency in brightness? All ok? Perfectly even?********
TL;DR: I’ve had 4 Nexus 4’s from Google Play all with the same yellow tint and brightness uniformity issues. Very noticeable. Not acceptable to me for a device that displays a lot of white “pages” and solid colours. Other phones (that I don’t want) do not have this issue (annoying). Please can you give feedback from your phone.
PLEASE NOTE:
Other threads discussing the “yellow tint” issue invariably attract trolls in their varying forms.
DO NOT reply to this thread if you simply want to say any of the following:
1) I don’t see a problem with mine therefore I don’t understand what you’re talking about.
2) I don’t see a problem with mine therefore you’re imagining a problem with yours.
3) I don’t see a problem with mine therefore you’re expecting a “perfect” screen and they don’t exist.
4) There are more important things in life to worry about. (A: I’m not “worried”, screen uniformity is important to me, get over it.)
5) I see a slight yellowing but I don’t care therefore you shouldn’t care. There are more important things in life to worry about.) [see above]
The attached illustration is slightly "exaggerated" to make sure the effect is reproduced for all screens. Not by all that much though.
UPDATE: 31/01/2013: Well I've received *another* N4 replacement today and lo and behold the exact *same issue*. With this one I'm going to wait it out at least a week and see if it improves. I *really* want an N4 as in every other way it's truly a great piece of tech. Pray for me guys!
Re: [Q] General poor screen uniformity - brightness and colour - Feedback Please!
My screen has no discolorations or brightness unevenness that I can see.
Sent from my Paranoid Nexus 4 using Tapatalk 2
I've had tint issues with all three handsets. First two it didn't disappear after use. This third handset SEEMS to have gotten a little better after a week.
All three had light bleed. First one was least noticeable, last two including the current have two blobs of light bleed in the exact same places along the top of the LCD.
It's almost as if something during manufacturing (screw tightness?) has caused it on both handsets. They are both 212K and revision 11.
It's annoying me and I may do one final RMA once I see what this new wave of devices brings.
mine's fine.
I did what you asked, OP and I'm not seeing and unevenness, yellow tint, or brightness issues (aside from auto-brightness being stupidly low).
The only issue I have with my screen is poor colors. I have a One X and an iPhone 5 that I sometimes compare with my N4's screen and it's shockingly apparent that the N4's screen has colors that just aren't worthy of a top-tier device. The resolution is nice and all, but I like it when the colors are nice and accurate. It's most easy to tell when comparing images of people and looking at their skin. Now I'm no anthropologist, but I have a pretty solid grasp of what skin looks like. The One X is probably the best at representing things the way they look IRL, followed by the iPhone 5. I don't know if it's just my N4 or other people have the same issue. I've tried using apps to adjust the color (FauxClock with Faux's kernel, to be specific), but nothing makes it look quite as nice as my other phones.
I guess you never asked about the second part, but there it is.
I had that issue when I received my device, Used kernel setting to rectify the problem but after 4-5 days of use it gone away. Now device is perfect.
I recommend you to stay with it for 3-4 days before returning it and check.
blackplague1347 said:
I did what you asked, OP and I'm not seeing and unevenness, yellow tint, or brightness issues (aside from auto-brightness being stupidly low).
The only issue I have with my screen is poor colors. I have a One X and an iPhone 5 that I sometimes compare with my N4's screen and it's shockingly apparent that the N4's screen has colors that just aren't worthy of a top-tier device. The resolution is nice and all, but I like it when the colors are nice and accurate. It's most easy to tell when comparing images of people and looking at their skin. Now I'm no anthropologist, but I have a pretty solid grasp of what skin looks like. The One X is probably the best at representing things the way they look IRL, followed by the iPhone 5. I don't know if it's just my N4 or other people have the same issue. I've tried using apps to adjust the color (FauxClock with Faux's kernel, to be specific), but nothing makes it look quite as nice as my other phones.
I guess you never asked about the second part, but there it is.
Click to expand...
Click to collapse
Thanks for the feedback - very helpful. I got *another* one through today and it seems "better" by a bit than the previous one at least. I think I'll see how it goes. Good to know that it's not only me sho can see the difference.
Audioboxer said:
I've had tint issues with all three handsets. First two it didn't disappear after use. This third handset SEEMS to have gotten a little better after a week.
All three had light bleed. First one was least noticeable, last two including the current have two blobs of light bleed in the exact same places along the top of the LCD.
It's almost as if something during manufacturing (screw tightness?) has caused it on both handsets. They are both 212K and revision 11.
It's annoying me and I may do one final RMA once I see what this new wave of devices brings.
Click to expand...
Click to collapse
All the phones I've had have been 301K and they've all had the same issue with yellow tint/backlight inconsistency in a very similar way. I'll have sent back 4 N4's if I decide to keep the current one! I think you're probably right about the screw tightness or some such other minor thing during manufacturing. It's not like a viewing angle problem. It does look like something to do with assembly in particular. Please do let me/us know how you get on and how things work out.
ksavai said:
I had that issue when I received my device, Used kernel setting to rectify the problem but after 4-5 days of use it gone away. Now device is perfect.
I recommend you to stay with it for 3-4 days before returning it and check.
Click to expand...
Click to collapse
I used FauxClock on my previous device (sat here waiting to go back) and it did seem to improve the situation slightly - but then since the screen isn't uniform, it reduced the yellow where it was yellow but then made it too "blue" on the rest of the screen. I really hope that this yellow tint is a "glue" issue or something that will even out through repeated use due to heating/cooling - i.e. expanding and contracting which somehow settles things down. I'll keep this one about a week and see what happens. Fingers crossed!
Thanks for your feedback guys!
Re: [Q] General poor screen uniformity - brightness and colour - Feedback Please!
alsheron said:
5) I see a slight yellowing but I don’t care therefore you shouldn’t care. There are more important things in life to worry about.) [see above]
Click to expand...
Click to collapse
^ this is pretty much all I can say.
Every nexus 4 phone I handled had a slightly yellower screen at the bottom. For me its barely noticeable, not as yellow as it is in your illustration.
They all seem to have that same issue, along with light bleeding across the top edge.
You can keep RMAing if you're not tired of that .. But you will not receive a fully uniform no matter what.
If screen uniformity is important for you get one of the above phones you mentioned.
Sent from my Nexus 4 using xda
beegbear said:
^ this is pretty much all I can say.
Every nexus 4 phone I handled had a slightly yellower screen at the bottom. For me its barely noticeable, not as yellow as it is in your illustration.
They all seem to have that same issue, along with light bleeding across the top edge.
You can keep RMAing if you're not tired of that .. But you will not receive a fully uniform no matter what.
If screen uniformity is important for you get one of the above phones you mentioned.
Sent from my Nexus 4 using xda
Click to expand...
Click to collapse
Thanks for the info, that's interesting to know. Out of interest, how many have you handled? Going by some comments on XDA and around the web regarding this issue, you'd think that the yellow tint was only on a handful of handsets and an isolated quirk, not as I suspect and you seem to suggest, a common trait of the N4.
alsheron said:
Thanks for the info, that's interesting to know. Out of interest, how many have you handled? Going by some comments on XDA and around the web regarding this issue, you'd think that the yellow tint was only on a handful of handsets and an isolated quirk, not as I suspect and you seem to suggest, a common trait of the N4.
Click to expand...
Click to collapse
Well,
I ordered three of them, all screens looked identical with the exact same issues: some yellowing at the bottom with a light bleed over the top edge (especially top right corner). I had to RMA 2 out of the 3 due to severe screen issues (screen flickering and dead pixels). Received 2 new units, screens have the exact same issue. I have 2 friends with N4s and their screens are like that too. It's almost not noticeable.
beegbear said:
Well,
I ordered three of them, all screens looked identical with the exact same issues: some yellowing at the bottom with a light bleed over the top edge (especially top right corner). I had to RMA 2 out of the 3 due to severe screen issues (screen flickering and dead pixels). Received 2 new units, screens have the exact same issue. I have 2 friends with N4s and their screens are like that too. It's almost not noticeable.
Click to expand...
Click to collapse
Does the light bleed appear like small blobs from the top edge?
My worst is the top left, about an inch in. Then there's another smaller blob nearer the right hand side. Little bit leakage top right and top left, but its worst along the actual taskbar.
I will take a picture tomorrow.
Sent from my Nexus 4 using Tapatalk 2
My first nexus 4 (rev 10) has perfect whites except the bottom of the screen would turn yellow after warming. All of the 4 RMA devices I've recieved (rev 11) don't have this issue EXCEPT all the rev 11s are calibrated horribly leading to the entire screen being yellower than my rev 10 unit. The screens are uniform, however, I just wish they calibrated the phones like they did with the rev 10.
The new rev 11s have a calibration problem while my rev 10 has a glue problem.
The new rev 11s also have a dimmer screen than my rev 10. I kinda just want them to send a perfect rev 10 to me.
Interesting because calibration issues affect the whole screen. If any part of the screen isn't the same "tint" as another part and its noticeable then this isn't something that can be fixed with calibration. Calibration can only save a uniformly "yellow" or "blue" tinted screen. To that end I wish mine was uniformly yellow. Mine is a rev 11 and I'm on my second day with it and hoping the bottom and left yellow tint fades soon and that it's just glue. I've tried Fauxclock and applying various screen tweaks with a previous similar phone and it helped somewhat but there's nothing can be done about unevenness in the tint really unless its glue and it dries.
Sent from my Nexus 4 using xda premium
So I have the edge since the 11th now. And every time I have the feeling that the screen is centered to the right side, I notice it extra with a case. As the area between the bezel and the screen is larger on the left side.
This afternoon I looked with an magnifying glass and indeed saw that this was indeed the situation. It is about 0.1 mm or so but oh so annoying. Luckily I can exchange it, however there will be only phones I stock around the 30th. Keeping mine thill then.
Are there others with the same issue?
The attached version is not my phone, but just an example to explain.
To better understand what i mean I attached a picture. I have the black version but you could see it as the black line on the right side of the phone is thinner than on de left, so the screen is essentially to far to the right..
not the best picture for judging...
But I know what you are talking, I have seen a few devices now and all of them were different in terms of screen quality and alignment!
for me, the worst problem is the uneven contrast (darker sides) on most of the screens. i own 3 devices now and all of them have display flaws. two suffer from a yellow tint when tilting, the other screen has a slightly darker left side... :|
TML1504 said:
not the best picture for judging...
But I know what you are talking, I have seen a few devices now and all of them were different in terms of screen quality and alignment!
for me, the worst problem is the uneven contrast (darker sides) on most of the screens. i own 3 devices now and all of them have display flaws. two suffer from a yellow tint when tilting, the other screen has a slightly darker left side... :|
Click to expand...
Click to collapse
I know. When my S6 comes back from warranty repairs I will try to make a picture. The S5 I have laying around can't focus clearly enough.
Well I hope I won't have a replacement with tint issues or such. Because my screen is, aside of the alignment, pretty perfect. Maybe I'm a bit nitpicky but I think that's justified with these kind of price tags.
I still have till the 30th to get used to it or exchange it. An order for a replacement has been made.
People complain about issues of screen color when tilting the device.. When are u ever tilting the device? U should be looking at it dead on anyways.
Honestly I don't see anything from ur picture, maybe ur just crazy.. If it is a little little misaligned who cares.. It's the curve part anyways..
Sent from my XT1575 using Tapatalk
StreetkillnHD said:
People complain about issues of screen color when tilting the device.. When are u ever tilting the device? U should be looking at it dead on anyways.
Honestly I don't see anything from ur picture, maybe ur just crazy.. If it is a little little misaligned who cares.. It's the curve part anyways..
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
The picture I used is just to explain what i mean with the black lines on my phone. Imagine that picture with no black line on the right of the phone, so the screen blends in with the white. And a bigger black line on the left.
That's what i have, but my phone is black so i cant put it on a picture to explain it.
I can really only tell in a dark room, but there is ever-so-slight light leakage where the glass meets the metal on the bottom of my S7 Edge. I see the slight leakage on the bottom-left and bottom-right. Doesn't bother me much, maybe a little, but my experience with smartphones is you'll be lucky to find one with absolutely flawless everything including screen alignment. It's often not worth exchanging for a new one, which may have other issues. Plus there's the whole issue of setting the phone up from scratch again. My device seems to be working fine (this is my 5th day with it) so far, so I won't be exchanging it.
After reading this thread I checked mine and its is misaligned like you described. I then went to Samsung and they checked and said that its normal. Now that I see it, its driving me crazy.
Sent from my SM-G935F using Tapatalk
Same
Same **** with me. My screen is also misaligned and its driving me nuts with this phone price i dont know what to do about it. I have s7 edge btw same **** all over with the s6edge. I really didnt notice it when using the phone. I noticed it when im checking out the phone looking how pretty it is then when i turned on the screen i noticed that the left side of my screen has a thinner black bezel and when i look on the right it has a little bitty gap.
Hi Everyone,
I bought the Le Pro 3 from Amazon when it was on sale. I've been using it for a few days, and while I love it as a phone, I have some concerns about the display. It appears that the very bottom of the screen (when holding it in portrait mode) is a little bit dimmer than the rest of the screen. I could be imagining it, but it's like the opposite of light bleed (dark light bleed?). Has anyone experienced this? Should I get a replacement unit? The other thing I have noticed is that it appears that the bezel surrounding the screen is a little uneven, meaning that the right bezel appears wider than the left one. The included screen protector might be making it seem like one is larger than the other, but I thought I would ask if anyone else has noticed this too. Thanks!
-sheich
The brightness on mine is pretty uniform, didn't notice any uneven levels of brightness in any particular region. I suppose it's worth getting a replacement over, might as well since you're within the 30 day return period.
I do not have either of the issues on mine. Maybe you have a defective unit.
Thanks for the replies. I think maybe what I described seemed a little too extreme. When I say a "little dimmer", I mean it looks like the pixels within 1-2 mm of the bottom bezel might be a little darker. It's only sort of apparent on screens with white or grey backgrounds, and would be easy to miss if you weren't looking for it. I'm kind of wondering if I'm just worried too much and this is part of the manufacturing process. Any other thoughts? Thanks!
-sheich