Hi developers !
Sorry english is not good
My dell streak No recovery. I'm installing clockworkmode recovery via Fastboot . Once the device says. ' download recovery done! ' . but pressing and holding both volume up and down while holding the power button. device only logo dell . I hold and wait ten minutes not appear .
Related
Hi All. DS Official 2.2 Froyo
Quick question
Tried to flash the Recovery of Koush-_S-2.5.0.1-streak-clockworkrecovery. But not to Recovery Mode.how is to fix this problem.
press the Volume up and down, and power button, the screen is only Dell.
someone help me this problem, No recovery can not upgraded to version 1.4.6 of Dj_steven
No recovery ==> No up room forever, Help ME!!!!!!!!!!!!!!!
Ok, when u say "dell" comes up - do u mean it just brings up the stock recovery screen? To get into clockwork you hold volume and power buttons, that brings yp recovery. Select option 2 - that will take u to clockwork. Lemme know how it goes.
Sent from my Dell Streak using XDA App
Ok, when u say "dell" comes up - do u mean it just brings up the stock recovery screen? To get into clockwork you hold volume and power buttons, that brings yp recovery. Select option 2 - that will take u to clockwork. Lemme know how it goes.
Click to expand...
Click to collapse
I hold Volume up and down. the screen No recovery, only Dell forever , I wait for ten minutes. help me
xenolala said:
I hold Volume up and down. the screen No recovery, only Dell forever , I wait for ten minutes. help me
Click to expand...
Click to collapse
Well wish i could help you more... don't see this kind of situation very often. But - doesn't seem like you are alone. Try to take a look at this post. There are several techniques that others have tried and some have worked for them. It may come down to a timing issue with the buttons. Can you get into fastboot at least? (power button + camera button)
http://android.modaco.com/content/d...ell-screen-and-recovery-fastboot-doesnt-load/
Hi everyone ! This is the first I use Milestone2 . After I use Motorola softwear update for my MS2, but nothing happen. And then it only have the red logo motorola on the screen . I don't know how to do with it (. Plz help me !!
P/s: sorry for my English !
If you can see the Motorola Red Logo, then probably you can enter Stock recovery. Try the following steps. You will lose all your data after this.
Power down your device.
Power it up holding power button + X simultaneously.
You will see an exclamation sign screen. At that screen, press vol down + vol up together.
You will see recovery menu. Choose wipe data there. (You'll lose all your data here).
Try to boot now. See if it works.
If it does not boot even after that then use this guide.
http://forum.xda-developers.com/showthread.php?t=1032372
kindly anyone plz tell me how to go into android from ubuntu?? its urgent :crying: detailed procedure..please
just wipe and flash an android rom or restore a backup.
recovery
how to enter recovery mode or fastboot??
Restore your nandroid backup
recovery
i'm unable to enter fasboot/recovery mode... vol down +power button combination not working
hold the power button for 10-30 seconds.
then turn it on again if it doesn't turn itself on again.
I found that shutting down Ubuntu took a LONG time of holding down the power button. You might just be putting it to sleep, not fully powering it off.
Then hold VOL- and PWR to get back to fastboot/recovery.
edit---
Oh wait... what device are you using? I have a nexus 4. If you have a Galxy Nexus... you can pull the battery.
I've heard that Ubuntu touch has ADB access, if that's the case you could connect via ADB and do adb reboot bootloader or recovery .
As a new user you really should steer clear of these alpha builds unless you know all recovery methods and the ins/outs of the phones fastboot and recovery methods.
You can use fastboot to flash stock Android again
Sent from my Nexus 4 using xda premium
Thanks friends... Holding power button for long done the trick... Entered recovery and flashed nandroid...
:thumbup:
Sent from my Nexus 4 using xda premium
as far as I know you gotta hold both Vol - and + with power to enter recovery?
i just wanted my zuk phone to get back to the stock rom ,...i tried http://forum.xda-developers.com/zuk-...ofrio-t3332563 Tool to flash stock rom ,.. the rom installed succesfully but when i tried to reboot my phone ,..i ended up with zuk boot logo ,..even i cant access fastboot by vol + pwer .....any solutions !
If there is no access to fastboot, the QPST rom files and QFIL tools is the only go for you now. Search the forums, there is a lot of information on this tool.
siva prakash said:
i just wanted my zuk phone to get back to the stock rom ,...i tried http://forum.xda-developers.com/zuk-...ofrio-t3332563 Tool to flash stock rom ,.. the rom installed succesfully but when i tried to reboot my phone ,..i ended up with zuk boot logo ,..even i cant access fastboot by vol + pwer .....any solutions !
Click to expand...
Click to collapse
I brick my zuk the first day . wait to battery out and screen off now press vol+ vol - and connect to the wallcharger any seconds disconect and use QFil see tutorials on the web , vol+ and connect and you can enter to fastbot and flash stock rom .
xdddd23 said:
I brick my zuk the first day . wait to battery out and screen off now press vol+ vol - and connect to the wallcharger any seconds disconect and use QFil see tutorials on the web , vol+ and connect and you can enter to fastbot and flash stock rom .
Click to expand...
Click to collapse
Hey mate no need , i managd to power off my mobile some how ,..now i can force my phone into fast boot directly by pressing vol up +down at same ,..now my mobile is completely stock and i can receive and update OTA
siva prakash said:
Hey mate no need , i managd to power off my mobile some how ,..now i can force my phone into fast boot directly by pressing vol up +down at same ,..now my mobile is completely stock and i can receive and update OTA
Click to expand...
Click to collapse
Hey,
I used a tool to get my phone back to stock, as i had bricked it in the past.
now i get the zuk logo when i turn the phone on and its stuck at that. nothing happens when i press vol up or down or anything.
any help please?
Mobile phone shutdown, you can enter the Fastboot , eRecovery, Recovery & Upgrade these modes:
Need to connect the computer:
Fastboot mode: long press the volume down key + power button.
eRecovery mode: long press the volume up key + power button.
Do not need to connect the computer:
Recovery mode: long press the volume up key + power button.
Upgrade mode: long press the volume up key + volume down key + power button.
When the phone is in these modes, long press the power button can restart the phone to exit the mode.
Did I help you? A ''thanks :good:'' would be highly appreciated
Problem in entering recover mode
Hi,
Thank you for this article, currently I can not enter recover mode I have unplugged the cable my device is not connected to my PC so I did press the volume up + power and i got the following message :
Your device has been unlocked and can't be trusted ......... your device is booting now...
and my device will keep the message till the phone turned off!
any idea .. please help .. appreciate your effort .
thank you
Alaa.Hussien said:
Hi,
Thank you for this article, currently I can not enter recover mode I have unplugged the cable my device is not connected to my PC so I did press the volume up + power and i got the following message :
Your device has been unlocked and can't be trusted ......... your device is booting now...
and my device will keep the message till the phone turned off!
any idea .. please help .. appreciate your effort .
thank you
Click to expand...
Click to collapse
Same here. What to do?
Alaa.Hussien said:
Hi,
Thank you for this article, currently I can not enter recover mode I have unplugged the cable my device is not connected to my PC so I did press the volume up + power and i got the following message :
Your device has been unlocked and can't be trusted ......... your device is booting now...
and my device will keep the message till the phone turned off!
any idea .. please help .. appreciate your effort .
thank you
Click to expand...
Click to collapse
As soon as the Huawei logo appears release the power key and continue to hold the volume up key until recovery loads. That seems to work for me. Make sure you press the 2 keys at the same time to start.
Do you have stock recovery? or TWRP? and is you phone rooted?
IF you have a rooted phone you can install 'Flashify' or 'TWRP Manager' or 'ROM Toolbox' to boot direct to recovery while phone is on.
Finefeather said:
As soon as the Huawei logo appears release the power key and continue to hold the volume up key until recovery loads. That seems to work for me. Make sure you press the 2 keys at the same time to start.
Do you have stock recovery? or TWRP? and is you phone rooted?
IF you have a rooted phone you can install 'Flashify' or 'TWRP Manager' or 'ROM Toolbox' to boot direct to recovery while phone is on.
Click to expand...
Click to collapse
With the volume up, it says:
"Your device has been unlocked and can't be trusted....."
Your device is booting now...
And then nothing.
Can't boot. Can only access fastboot.
Reflash your recovery in fastboot.