Related
hy,
i have flashed my unlocked athena x7500 with rom 6.1 by irius. the update breaks at 82%.
now i have only pixels on screen, and nothing happens.
in the bm stands the following: ' R\
IPL-v1.00
' R\
SPL-v1.25 Olipro
if i try to flash, the updater shows after 1% the error: invalid model id
i have tryed to flash with sd-card (tested with os.nb, ruu_signed.nbh, spl.nb and os.nb0) it show LOADING ... for 2 secs, thats all.
what can i do??
sorry for my bad english, im german
SD card flash requires card up to 2GB (non-sdhc) and ATHEIMG.nbh file in root folder
you will need to rename ruu_signed.nbh into ATHEIMG.nbh and restart with camera (full down) + reset
loading...
checking...
stops after 3 seconds
1gb, formatted with fat32, non sdhc
I had thee same problem flashing an Athena (and wasn't mine
Cmonex helped me to restore via mtty the model id
She suggested the same steps needed to solve the wi-fi problems (reflashing the MAC address)
And it worked, restoring the ATHE100 model ID
You can find somewere in this section the post with step by step instructions and the sw needed. The fix works only with xp, to solve with vista you need CMONEX help (PM)
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 << see her
my ameo lives again
YYEEEEEHHAAAAAAAAAA
yeah that's the correct thread for both wifi and modelid issues (they go hand in hand)
sergiopi: huh? vista? vista works fine, the mtty0513 I posted with the instructions is vista compatible.
i thought i was going to have a heart attack when i got bsod.. thank god i found this thread. w00t!
htc x7500 problem
hello every body . after thousands research Istill can not fix my HTC X7500, so I ask for you help to find a solution to fix. I would like to have the WM 5 official rom . please can you help me ?thanks
Hi,
Hp just released an update for the 614, only for englisch.
I have a german 614
I dont care about the OS part since I use a cooked 6.1.
But the update also contains a modem / radio update to version 0.88.
Currently out there i think there are 0.77 and 0.81 depending on language.
I believe the radio fw is language independent when it comes to functionality. But the hpruu says wrong language.
With the current universal hpruu tools you can only update the OS which is of no use.
I know you can update the radio by booting with the key combination:
lower left key on the side (record button) and the camera button.
Then turn on ... it shows : SD loader for modem
(similar on how you update the OS)
I also know that the radio update files are in the update.
They are called
amss.mbn
amsshd.mbn
maybe also partition.nbf
But I am not sure about this.
It might work with just copying the file to a non HC SD card and using the key combination.
There might be some file renaming involved.
I someone out there to try that and let us know how it worked ?!
Thanks
sax
hi, imho theoreticaly you can update
1) .mbn files with qualcomm loader(SD Loader for modem) iam tryied it but no luck , .mbn files from hp 1.01.04 update have bad format not usefull for flashing from sd card :/
2) .nbf files from eboot loader(SD Loader), no luck bad format too :/
other way you can use QPST tools from Qualcomm or QC BS Firmware Analyzer(avaliable on xda forum)
small how-to connect ipaq614c for using with this tools
1) put ipaq to modem mode (push ML and power on)
2) connect ipaq to pc
3) install MotoQdrivers.zip (dont forget to adjust speed for COM ports)
i have included Qualcomm MSM6280 loader for QPST - NPRG6280.ZIP (ipaq 614 have this chip for radio)
sorry for this chaotic text i hope that is usefull
Saxon,
File partition.nbf is for IpaqFileStore update.
Maybe you should try with the following way:
- extract the whole package from HP side
- remove from the obtained directory the OS file (the larger one)
- put your device into SDloader state (voice recorder + mute + power on)
- connect your device into PC via USB
- launch RUU utility
In my opinion there is a big chance it will work.
Such way (using the SDloader) was working for one polish case where the upgrade of firmware failed due to PC crash. The only chance to flash again was to use SDloader + HP tool.
Good luck.
Z!L0G80 said:
hi, imho theoreticaly you can update
1) .mbn files with qualcomm loader(SD Loader for modem) iam tryied it but no luck , .mbn files from hp 1.01.04 update have bad format not usefull for flashing from sd card :/
2) .nbf files from eboot loader(SD Loader), no luck bad format too :/
other way you can use QPST tools from Qualcomm or QC BS Firmware Analyzer(avaliable on xda forum)
small how-to connect ipaq614c for using with this tools
1) put ipaq to modem mode (push ML and power on)
2) connect ipaq to pc
3) install MotoQdrivers.zip (dont forget to adjust speed for COM ports)
i have included Qualcomm MSM6280 loader for QPST - NPRG6280.ZIP (ipaq 614 have this chip for radio)
sorry for this chaotic text i hope that is usefull
Click to expand...
Click to collapse
I used the qpst already and it worked that way that i could upgrade but phone didnt boot afterwards. so i am very careful with this tool now.
I am just wondering why your sd loader (the OS image) update didnt work. because i had no probs with it so far. also from the hp orig files.
did you try the qpst update ???
if yes did it work if yes can you send a step by step ?
thx a lot
hi , try my patched ROMUpdate.dll mayby it could help , i dont try QPST because i have succesfully update my 614c with hpruu utility --> http://rapidshare.com/files/139300161/ROMUpdate.dll.html
did you also try the cooked wm6.1 os on it already ? does it work with the new fw0.88 ?
thanks !
yes, when i update fw i reflashed my own 6.1 based on yevg001 v1.4 and works ok
Z!L0G80 said:
yes, when i update fw i reflashed my own 6.1 based on yevg001 v1.4 and works ok
Click to expand...
Click to collapse
No success ... either with the romupdate.dll oder with the other tools.
A bit stuck now ... anz other suggestions ?
thanks !
forwarded
29 Jul 2008 release on HP Official Site HP iPAQ 612c WM 6.0en OS 1.01.04 FW 0.88
HOW TO USE:
1. Download the FILE to a directory on your hard drive.
2. Execute the downloaded file and follow the on-screen instructions to unpack the ROM update files to a directory. (NOTE: This directory should not contain any file or folder from any previous ROM upgrade)
3. Establish an ActiveSync connection between the iPAQ device and the host PC using a USB connection.
4. The ROM Update Utility (hpRUU.exe) starts automatically. Follow the on-screen instructions to complete the ROM upgrade.
NOTE: Once the update is complete, the FILE downloaded in Step 1 can be deleted, if desired
Download Link: http://www.mediafire.com/?sharekey=a65dc2a6e56aea29d2db6fb9a8902bda
Thats correct
But thats for english devices.
I have a german one where it doesnt work, and I am looking for a workaround.
Any suggestions ?
Get Hp Sp38905.exe http://h20000.www2.hp.com/bizsuppor...swLang=18&mode=2&taskId=135&swItem=hh-59339-1
Use winrar to unpack it.
You'll find an Eboot.nbf. This Eboot.nbf is language and SKU id independent.
Replace the file header of all .nbf files from hp 1.01.04 update by the header of this Eboot.nbf file.
The header is just the first 3424 bytes of .nbf files.
You do not need to change .mbn files.
Then you can run Hpruu.exe to update. The file names shown during updates are wrong, but results are right.
@kkwy
And what if, like in my case, sp38905 is reporting the same error.
product id: FB136AA#ABB
Just try to find one .nbf file that you can flash.
Then replace header file with the header file of that .nbf file.
The header seems to be useless (solely for checking) so you can replace then at will.
http://rapidshare.com/files/139300161/ROMUpdate.dll.html mayby now working ,try
EDIT> link updated
@ Z!L0G80
Yes, It works.
Thanx
Sucess!!
Now I have os 1.01.04, fw 0.88.
It takes a long time for radio firmware to flash, but, be patient.
Thanx again Z!L0G80
Thanx Z!L0G80's
It works for me to on the Dutch 614.
Strange thing is, that in de system config it stil says Dutch version of the mobile device (but it's UK now).
Very nice again.
ok great .... works ! thanks a lot !
would it also work with the 914 ? anybody tried ?
thx
My PDA already came with 1.01.04, fw 0.88 Rom, however I used the HP rom update utility to see if the rom would update without issues.
The rom update worked fine, however unfortunately something annoying is happening with this rom update. Now every time I try to do a clean boot, the first time the PDA turns on, after marking the screen, it would try to do some HP software update and right after the update I am forced to do a Reset, then I can use the PDA.
Previously I didn't have to do this, when I did a clean boot, the pda worked straight away after marking the screen, and I wouldn't need to reset it.
I think the reason for this maybe because this rom comes with extended rom, is there anyway of taking it back the way it was, or getting rid of the extra applications like the streaming player
This is the Rom I used
Type: BIOS
Version: 1.01.04 (22 Jul 2008)
Operating System(s): Microsoft Windows Mobile 6
File name: sp40097.exe (53 MB)
http://h20000.www2.hp.com/bizsuppor...3048-1&prodTypeId=215348&prodSeriesId=3544358
Am I the only one experiencing this issue, is there another rom that doesn't do this?
Thanks
anyone tried Sd loader modem with success?
what if the Activesycn not work?
I have tried copy the amss** files on SD, then sd loader modem. And wait so long time, 2 hours, and stay with the screen "write amsshd.mbn". I dont think it is working.
Anyone tried ?
Hello,
i tried to flash my blueangel to Windows Mobile 6 Build 20758, following the instructions in the wiki.
Now i have a problem with flashing the device. I downloaded the rom from the wiki-page (Version 3.02 without ramdisk) and extracted it to the directory where MaUpgradeUt_noID.exe (version 1.32) is. MDA III is cradled and in Boot Loader Mode (USB displayed). But the device couldnt be recognized ( screenshot and i cant do the upgrade.
i carefully followed the instructions from the wiki.
What i am doing wrong ?
Maybe your rom not's good ?
just click the next button... and see what happens next..
cheers
evo
as long i upgrade or reflash any type of BA ROM (wm5,wm6,wm6.1) it did not show my current device version, usually when you through this option there is nothing wrong just klick upgrade and your device will flash.
So far i know, u dunt have required HTC RUU files. The 20758 package has only nk.nbf file and no RUU
go to buzzdev downloads on buzzdev.net(u need a username for that) download the wm2005 upgrade from there. Extract it. then replace the nk.nbf with the wm6.1.20758 one. just run BAUpgradeUT.exe and u will go fine
remember to put your phone to bootloader mode by press [record]+[on/off] then reset.
if the error says: connection error. Take out the Mem Card and I recommend you should take out the sim card too. Also ensure that your battery is charged more than 50%
Edit: BLUE ANGEL MODS! Please upload the cracked BA RUU on the wiki or stiky it at the forum. coz usually roms posted here dont come with the RUU
SO
If you have a mini liquid e310 branded and you want to flash unbranded rom this guide will help
download unbranded rom and drivers from acer suport
http://www.acer.co.uk/ac/en/GB/content/drivers
download msi extractor
http://lessmsi.googlecode.com/files/lessmsi-v1.0.8.zip
extract in a folder with lessmsi your chosen firmware
go in this folder \SourceDir\APPDIR and make these changes:
you need to change the name that corresponds to the software of your phone to trick him !
STEP1 first check in your phone build number
my example
Acer_E310_1.400.06_EMEA_TIM
STEP2 modify VerInfo.txt content
in my case was
from
Acer_E310_1.001.31_EMEA_GEN1
GEN1
0409
TO
Acer_E310_1.400.06_EMEA_TIM
TIM
0409
STEP3 modify FileList.txt
in my case was
from
AA20.AMSS.1.001.31_4G_2Die.hex
Acer_E310_1.001.31_EMEA_GEN1.hex
Kseries_user.Android.1.001.31.hex
Kseries_user.Androidappsbl.1.001.31.hex
TO
AA20.AMSS.1.001.31_4G_2Die.hex
Acer_E310_1.400.06_EMEA_TIM.hex
Kseries_user.Android.1.001.31.hex
Kseries_user.Androidappsbl.1.001.31.hex
STEP3
change the name of this file
in my case was
from
Acer_E310_1.001.31_EMEA_GEN1.hex
to
Acer_E310_1.400.06_EMEA_TIM.hex
step4
connect your phone and click on the EUU.exe
WAIT TO FINISH !
YOUR PHONE IT S UNBRANDED !
Rooting liquid mini
I tried liquid mini root using the superOneClick v1.9 on my ubuntu 10.10 + adb (using mono package) but failed. The process stop at the chmod psneuter. Previously I upgraded the firmware directly from the phone. Is this the cause of rooting failure? please help me to solve this. Thx.
Acer Liquid E310 ROM
Never mind i've figured it out; by using old methods.
thanks, but can this unlock the phone for other networks or it's onely for unbrand firmware ?
This is a good question bono.bel! I must also know this! My E310 is unlocked too, and I need to unlock it.
hi all,i got an acer e310 but the phone just restarts by itself all the time,in this case i cant see what the firmware version is,i cant check anything is there a way to flash it?
thanks a lot in advance
Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx
If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300
THX!
I will try ... downloading ...
So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...
I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(
Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.
YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415
so it´s over ... i send the phone back ...
Thank u very much 4 helping.