hi, anyone can help me, my htc snap s520, spl 1.24
i used jockyw hardhspl ,,,follow guide ,, it said all done successful
but my spl still 1.24 not 1.19
Same problem!
yes.. help us.. same problem it all looks like it worked fine and then i reboot and im back to the same spl and nothing has changed at all.
Same problem here. Bricked my Snap.
Me too..need mobilicity snap MAPL100 SPL 1.24 official ROM. Stuck at startup and wont take any other rom.
rapswiller said:
Me too..need mobilicity snap MAPL100 SPL 1.24 official ROM. Stuck at startup and wont take any other rom.
Click to expand...
Click to collapse
I too have the same problem... mobilicity malp 100
when I boot in normal mode this rows appears:
smart mobility
B 00
G 61.36t.25.29AU
R 3.47.25.48m
D 2.08.82894
when i boot in bootloader mode this appears instead:
MAPL100
SPL-1.24.0000
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x80
PanelInfo 15-0x2
reset with volume up + power on key resets the phone and it says reset successful and then again gets stuck at the same initial screen... any help will be greatly appreciated... thanxs...
even rebooting with the SD card does not work...
Related
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM
its my very 1st time to try upgrading my 02 xohonell, everything runs smothly
100% complet. but when i rebot my phone it hapend to be stuck on bootloader. can somebody help me about this?..is there a way to fix my phone?
on screen says....
typhoon PV/DVT
IPL 1.00
SPL 1.01.0109
Need an IU (0)?
same problem here.
edsor_2008 said:
its my very 1st time to try upgrading my 02 xohonell, everything runs smothly
100% complet. but when i rebot my phone it hapend to be stuck on bootloader. can somebody help me about this?..is there a way to fix my phone?
on screen says....
typhoon PV/DVT
IPL 1.00
SPL 1.01.0109
Need an IU (0)?
Click to expand...
Click to collapse
U can try upgrade to ROM(27Mb) on IU mode.
If not and using SD card upgrade
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.
i HSPL my HTC Pharos and after HSPL successfully done my htc stuck at bootloader, so i update it with ROM but still on bootloader screen, so i update it again with official rom so still same plz help me how can i solve this problem
thanx in advance
can anyone help me plz
i am in trouble
any body here
plz help me
plz anyone can help me or not?
hey iwant to help..
but i am not understanding whats u saying..??
thanx for your reply
i have change language from norwigian to english but now my htc stck at bootloader screen (tri color), now i can't update any rom, please help me
shahzaadbutt said:
thanx for your reply
i have change language from norwigian to english but now my htc stck at bootloader screen (tri color), now i can't update any rom, please help me
Click to expand...
Click to collapse
When you plug your pharos to usb and run the ruu aplication is the official rom
loading or not?
When you switch your unit off and then press and hold camera button and press
power button do you get something on your screen or not? At this point you should have connection with your PC and update should start, when you run
ruu update.
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
one question: ARE YOU SURE U USED A ROM OF THE PHAROS ROM DEVELOPMENT FORUM?
shahzaadbutt said:
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
Click to expand...
Click to collapse
I think that you have to try official pharos rom.
When you press and hold both buttons directly under the screen
and then power button, you will get reset to factory setting option.
Here is a link how to restore your pharos:
http://forum.xda-developers.com/showthread.php?t=458965
There is missing nbhextract in first lot of downloads, but when you scroll
down the page, you'll find it there.
Here is a link to official English pharos rom:
http://forum.xda-developers.com/showthread.php?t=394721
ojejoe said:
I think that you have to try official pharos rom.
When you press and hold both buttons directly under the screen
and then power button, you will get reset to factory setting option.
Here is a link how to restore your pharos:
http://forum.xda-developers.com/showthread.php?t=458965
There is missing nbhextract in first lot of downloads, but when you scroll
down the page, you'll find it there.
Here is a link to official English pharos rom:
http://forum.xda-developers.com/showthread.php?t=394721
Click to expand...
Click to collapse
i have already try this rom but after 2% give me error
shahzaadbutt said:
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
Click to expand...
Click to collapse
Hello Brother,
Did u flashed hardSPL first or the rom directly????As the SPL is in your phone is not patched "Hard SPL".........Hard SPL sould look like "SPL 1.11.00MOBIZ"....So thats the problem!
Hard SPL was not flashed successfully!SO that was the problem!
BR
my mobilicity htc snap is bricked! no orginal rom. need a goldcard.img to make a goldcard to flash a signed rom.
my sdcard cid: 009a00dc981b11804731305553445303
can someone help me?
tony378 said:
my mobilicity htc snap is bricked! no orginal rom. need a goldcard.img to make a goldcard to flash a signed rom.
my sdcard cid: 009a00dc981b11804731305553445303
can someone help me?
Click to expand...
Click to collapse
Moved to proper forum.
i have the same problem.
when i boot in mormal mode this rows appears:
smart mobility
B 00
G 61.36t.25.29AU
R 3.47.25.48m
D 2.08.82894
when i boot in bootloader mode this appears instead:
MAPL100
SPL-1.24.0000
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x80
PanelInfo 15-0x2
i've tried many guides to "make a goldcard" but none of that works..
my cid is
619A00D0139B9C0447323041534D5402
reversed cid:
02544D5341303247049C9B13D0009A61
i think the big problem is SPL 1.24...
anybody can helps me?
EDIT:
i'm searching for a standard/hard SPL, and an italian ROM (stock or custom)
thank you