Database Users

Whats happened to my phone :|

ok let me start by saying im new to this type of thing
Basically i have been wanting to get some cool apps and themes etc for my HTC HD2 T-Mobile uk phone for a while now.
I searched and found this awesome site etc..
After messing about for a good 3-4 hours on finding what means what i got windows mobile downloaded lots of Roms and alot of head scratching figuring out what it all means.
After alot of messing about i got Windows mobile to reconise my phone and i flashed my phone and put a Rom on (which i cant remember which now>_< )
Then the problems started to happen, Windows mobile stopped detecting my phone altogeter.
So i tried changing USB ports/Activating faster sync in the phone settings and trying over and over, Nothing!!
So i thought i would restart my phone and computer.
Restarted my computer and looked to see my phone had got stuck on the boot screen. After 10minutes of waiting for the phone to start i took the battery out and tried that and same thing over and over.
I then tried holding down volume buttons and reseting and it finally started after i reset it.
I i thought i would restart it again and the same thing happened! so i thought i would try a hard reset.. Done that and nothing, still the same thing >_<
Now im stuck with a crap interface that i can't use and i can basically never turn my phone off because it gets stuck.
Please someone help this noob out and put a end to my frustration on what to do!

right sounds like you havent got the right radio for you're ROM,
Can you remember what ROM it was you flashed? if not shouldnt be to much of a struggle
turn you're phone off hold the volume down button and keep holding turn the phone off, and if you get the coloured screen you're safe and we can sort this out

the first mistake many people make is flashing an all singing and dancing cooked rom and think that's it.
if a rom unlocks the extra ram, (or says tmous compatible, or says the rom Is based on 2.x..).they all mean the same thing - the radio must be a tmous radio, i.e. one with ..50.. in the version number.
all non tmous phones come with radios with ..51.. version numbers, and hence boot problems until you change the radio.
(think yourself lucky, if you flash our radio to a tmous it kills the phone)
next time, read the rom thread for recommended radio. it will be in the first or second post.

I haven't had time to sort this out until today and im so confused and just need some help explaining what and how i will do this.
My phone doesn't boot unless i hold down the volume buttons and reset it and then wait 5minutes for it to restore everything.
From what i gather i need to change my Radio rom so my phone starts properly.
Ok i get that .. but how do i put a radio rom on my phone if my PC does not reconise the phone in windows mobile? (just says not connected)
I can get the phone to show up on my computer if i change it to "disk Drive"
but not if i use active sync.
So please someone explain to how i can get my phone showing up so i can put a new Radio rom on to my phone using windows mobile?
I appreciate any help thanks

you can flash from bootloader. phone doesnt need to be booted.
boot into biootloader, flash the radio, done.

How to fix an HD2 that Freezes at the splash screen and won't boot

HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.

i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.

Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!

can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?

waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l

I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted

i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!

I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?

Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol

stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.

have you tried loading a rom from the root of your memory card LEOimg.nbh?

i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken

melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.

[Q] HD2 cannot turn on...

hi there, im new here and ive been searching on the forum for a long time, but i didnt see any solution for my problem... (or maybe i was blind) so when i was trying to flash back original ROM from bootloader screen through USB, it didnt show my current image version info on the screen, but it did show the image version that im going to upgrade... however, i still let it updated and it said its succeed. but when my phone going to reboot, it stuck on the "stick together" screen... btw, my phone is PB81120 SS-B3 SPL-2.08. HSPL 8G XE. hope someone can help me solve my problem... thanks first :]

Go into bootloader again and connect the device to your PC via usb (should show USB at the the bottom in bootloader) and run the Rom Update Utility again. But first make sure the ROM is compatible with TmoUS Hd2.
I would recommend flashing stock from the bootloader just to be safe.

but i was trying to install T-Mobile_HD2_MR_Software_2.13.531.1 under bootloader, and it still the same... :[

Was that what you origonally tried updating to? Or was it a custom rom you had tried?
Sent from my HTC HD2 using XDA App

that was the latest i tried to updating to, or any different kinds of version of original ROMs... before, i tried to update a custom ROM on it first, but it failed :[ actually, when i first got my phone it was unlocked, so while i was waiting to get the unlock code for it, i decided to install android on it... later on i had successfuly putting android on it, and by that time i got my unlock code too. then i typed it in and my phone just reboot and stuck on the "stick together" screen till now... so i started to look through the forum and found out that most ppl said is to reflash the ROM back to the original one first, and then everything would be alright... but i guess it didnt work on my phone D:

Have you tried a hard reset? (Hold both volume buttons while booting)
Sent from my HTC HD2 using XDA App

yeah... i tried everything :[

hi,
don't worry, your problem is resolvable. (as long as you see something on screen, you are lucky.)
1) When the stick together screen comes, do you see any numbers on left bottom after waiting for some time say 1 min.
if yes, then your problem is missing OS image only.
in this case, take out the battery. after that, keep volume down pressed all the time and insert battery again. press power button, if mobile does not start immediately. please keep volume down button pressed till the time tricolor screen does not come on. after that connect cable to computer and update normally.
2) If you don't see any number, it may mean multiple things, which all are resolvable. (most likely bootloader stuck in another mode.)
in any case, try steps in given in 1 and report back. before reporting back please install mtty on your computer as it is needed to send commands to mobile to get out of this mode.

Try this: http://forum.xda-developers.com/showthread.php?t=668347

[Q] [q] black screen of death after failed android install

Good morning.
im a newbie at updating the HTC HD 2 Leo i have for T-Mobile (which is probably WHY i shouldnt have messed with it in the 1st place...).
i tried downloading the android gingerbread rom onto my phone last night and while downloading the software their was a partition error and my phone was stuck afterwards rebooting on the failed software dowload (would get stuck on a black screen only showing the HTC letters in green.)
i FURTHER screwed it up by trying to put it in bootloader mode and trying to install the Original software i found which i downloaded off a website for the factory version of my HTC HD 2 Leo.
NOW it only shows a black screen.. the computer cant sync my phone, the battery light is not showing and no signs of life...it wont even let me go into bootboader mode...all it says when i plug it in to my USB port on the computer is under hardware found " Qualcomm CDMA Technologies MSM"...
someone PLEASE help this lost noob... much appreciated

wow! erm.... have you tried a hard reset? recovery software might still be on there, with any hope.....

i tried , but the hd2 doesnt show ANYTHING on the screen, i tried holding both buttons and pushing the power on button but the factory screen wont pop up because the screen stays permenantly black

Sounds as though you flashed a T-MObile USA with a ROM with a .51 RADIO; if that is the case then the phone is bricked.
You could always telephone HTC and say you charged your phone overnight and it didn't respond the next day - with no mention of flashing the phone.
As you have found out flashing before reading can be fatal (for the phone) and expensive. I have flashed quite a few HTC WinMo phones, but for every different phone I read then reread the instructions.

thanx i appreciate it , it sux that i cant get it fixed.

[Q] Stuck at bootloader at boot

Hi
A friend of mine has a HD2, never HSPL or anything and still running on 1.42 rom.... Now everytime it boots it goes straight into the bootloader. Since its never been messed around with I find it odd, seen it before with people with other phones. Would this just be a corrupted ROM and therefore it goes there, would if poss a stock rom flash be able to restore the phone, if that is not the case then a warranty return is still valid, but obv not wanted.
What do you think, will this work? I did search but everyone's posts come up with I task 29 and now stuck... etc and not from a stock bootloader as well!
Cheers any help will be appreciated, my first thing I will get him to try is a rom reflash but that will be tonight, I'll update on the progress then!

First thing I would check is if his volume button is stuck for some reason. Second would be to see if it detects a USB connection, then hard spl and new rom from that point. Keep us posted.
Sent from my GT-P1000 using XDA App

chris10230 said:
Hi
A friend of mine has a HD2, never HSPL or anything and still running on 1.42 rom.... Now everytime it boots it goes straight into the bootloader. Since its never been messed around with I find it odd, seen it before with people with other phones. Would this just be a corrupted ROM and therefore it goes there, would if poss a stock rom flash be able to restore the phone, if that is not the case then a warranty return is still valid, but obv not wanted.
What do you think, will this work? I did search but everyone's posts come up with I task 29 and now stuck... etc and not from a stock bootloader as well!
Cheers any help will be appreciated, my first thing I will get him to try is a rom reflash but that will be tonight, I'll update on the progress then!
Click to expand...
Click to collapse
The post above me is correct check and make sure the volume down button is not stuck/Hung in the down position. If it is stuck in the down position like it is being held down at boot then this is the cause of it going straight to bootloader at boot up. If there is no problem with the volume down button then try a hard reset of the HD2. Warning this will reset your friends HD2 tolike it was fresh out the box so any photos, videos, documents, and etc that is not on the SD card they will lose. Also any contacts that are not backed up withan app like Microsoft My Phone will be lost. To do the reset while the HD2 is off bold the volume up and the volume down buttons down and press and bold the power button down. When you see the tri color screen come up release the volume and power buttons and follow the instructions on the screen (hint: you will want to press the vume up button). Now if after the Hard reset your friends HD2 still goes to bootloader at boot up then download and flash the stock ROM for their HD2 you can find it on HTC.com but make sure you varifiy that it is for their HD2 by entering the serial number of their HD2 you can find the serial number look under the battery. To flash the ROM let the HD2 boot up to the bootloader and then connect it to the computer via USB cable and wait for the Serial in the white bar of the boooader screen to change to USB and for your computer to show it recognize the pbone and then run the .exe or RUU wich everone the ROM has.

Never thought of the key being held done will try that first.
Also I won't HSPL'ing as its in warranty and a half HSPL'ed phone is well useless

OK so i feel like a bit of an idiot for this one. Turns out what I call a bootloader and he does is totally different. For me Its the tri-colour screen, for him its the red/orange windows boot screen. So it was all solved by a HR. Great..
Sorry for those who offered the advice but it really was not needed. but solid advice it was, you always can rely on help in here