First things first, I am using a non-rooted droid x. I was using the browser last night, and I opened a picture that was 7mb. My phone then became unresponsive, automatically locked (after 30 seconds), and now, I can't unlock it, reboot it, or do anything at all. I just have a paperweight. I was going to take the battery out, but I now have realized that the case that I got from Verizon is extremely difficult to get off. Does anyone know if there is a way to manually reboot it (like pressing power + home button for 10 seconds on iPhone?), or does anyone have a good method of taking the case off? Thanks. All help is appreciated.
EDIT: I just ripped the case off and removed the battery. It's fine now.
PM me if you want this removed.
Related
Hey Guys I really need your help my N1 won't power on for some reason. I really need to get some things off the phone from certain software that I had in case I have to have it repaired or sent away. I'll try to be brief what happened I was exercising with my phone inside a protective case that covers the whole phone and I went to change the next song while listening to music and when i went to push the power button the screen remained black the whole time and I couldn't see anything at all the screen was black the whole time after numerous attempts at pushing the power button. So I held down the power button to try and reboot it and then the music stopped, so then I hit the power button again to turn it on and it hasn't turned on since yesterday. I even took the battery out and let it chill for a min and still doesn't work. when I plug it in to the charger the orange/green light comes on and as well with the USB connection too, but still can get it to power on.
Anyone have any Idea what it could be? I am assuming it's the power button but I am not for sure. Is there anyway to turn it on again in case i need to recover any files, etc. the reason i want to get it to work is that I don't want to have to go through the hassle of sending it away to be repaired if there is some way I can do it myself. I am trying to avoid sending it away with my carrier and I really need to access certain files on the phone if all else fails. If anyone has any ideas I'd appreciate it thnx to anyone.
Responded to your other post...
Sent from my Nexus One using XDA App
I have the latest mango working on my HD2. Loving it, but I'd like to power down my phone on occasion. When I hold the power button down, I get the window that says "slide down to power off". When I attempt to slide it down, it doesn't respond. Anyone else experiencing this? Or does anyone know how to shut down the phone besides opening it and removing the battery?
There's no other way as far as I know...
But you can try to make a hardreset (they often fix some issues) or use a different storage card as slow cards can cause a lot of strange issues.
Hey, found somthing that might interest you:
http://forum.xda-developers.com/showthread.php?t=1006331
He's talking about being able to shutdown the system view native code. Download the test app, there's maybe a shutdown test.
My HD2 started doing this yesterday. No indication this would happen either. After I unsuccessfully attempt sliding to shut down the hard buttons (green call / home / back / windows / red power) still work, but I am unable to use any of the tiles. I have to press the (red) power button a few times until it will allow me to unlock the phone and use the tiles. The last two apps I installed before this occurred were What's App and Microsoft Unit Converter. I uninstalled both and nothing changed. I was on 7720 and then updated to 7740 and the SP1 update provided. This didn't change the behavior either. Any one with a clue on how to fix this, please assist.
The only time it has allowed me to slide to shut down is when the battery was completely drained and it warned me to charge the phone or it would shut down. Otherwise I have to pull the battery to shut down.
This did make me realize an instant reset / shut down application would be nice.
I had this same issue occur about a week & a half ago. It only got worse. It's probably a broken digitizer. It's been happening a lot lately to HD2 owners. I'm taking mine in tomorrow to get fixed. Check around, I found a place to do it for $50. Or if you feel comfortable changing it yourself, you can order them for around $20 on Amazon. Or if you have insurance, you can get it fixed by HTC.
I am hoping it is not the digitizer as I don't have anyone to fix it for a low cost locally and after watching the process on youtube, do not really want to try it myself.
I had the same issue after SP1,
I reflashed just yesterday my phone again to 7740. Now everything is working perfect now. I will wait for the SP1.5 .
This happened to me too....a warning sign my digitiser was about to go
---------- Post added at 01:00 PM ---------- Previous post was at 12:57 PM ----------
This happened twice within a year so it really worries me that it will happen again. Especially as warranties are running out
assangflexx said:
I had the same issue after SP1,
I reflashed just yesterday my phone again to 7740. Now everything is working perfect now. I will wait for the SP1.5 .
Click to expand...
Click to collapse
Worked like a charm. Thank you.
One odd tid bit. When I ran the update it said it was unsuccessful. Remember I was already on 7740. It still worked though!
Hey,
This is my first time posting here and really using the site. I have the Sprint Galaxy S4 and just updated to the SlimKat official build 7 and had no initial problems. A day later it starts to reboot constantly and would stay on for a couple minutes. Now it is stuck in a bootloop and will shut off even when going into download or recovery mode. When plugged into a computer the computer won't even recognize the phone and the phone will not turn on. The only time the phone will even start to boot is when it is not plugged into wall/computer and on battery. I have no idea what to do now.
That's a tough one. Usually with a soft brick, if you can make it to recovery, your phone can be saved but since you can't... I hope you get it working!
Sent from my SPH-L720 using XDA Free mobile app
puresublimie said:
Hey,
This is my first time posting here and really using the site. I have the Sprint Galaxy S4 and just updated to the SlimKat official build 7 and had no initial problems. A day later it starts to reboot constantly and would stay on for a couple minutes. Now it is stuck in a bootloop and will shut off even when going into download or recovery mode. When plugged into a computer the computer won't even recognize the phone and the phone will not turn on. The only time the phone will even start to boot is when it is not plugged into wall/computer and on battery. I have no idea what to do now.
Click to expand...
Click to collapse
Go to sprint galaxy s4 thread. All answers there. You need Odin 3.09 then stock ng2 tar. To flash through computer.
Sent from my SPH-L720 using XDA Free mobile app
I already have odin and the tar files for stock. When plugged into my computer it will not even register that it is connected and so I can't use odin to flash it.
The same thing is happening to me. I get to the Galaxy S4 splash screen, then it shuts off. Even if I try to boot into recovery
I'm going to pile on in here as I seem to be having a similar issue. I had my S4 (not rooted, stock rom) on my dock streaming google music. A phone call came in and the phone started vibrating like crazy and wouldn't stop. The screen shut off and the phone was still vibrating. Finally it stopped and was shut off. When I try to start it a few things happens. It will sometimes boot to my lock screen and the screen goes black and I think it is powered off. Sometimes it will get past the lock screen and then die shortly after. After like 2 or 3 times of that it won't even boot. It loads the Samsung screen but never gets to the Sprint screen or boots. If I leave it for some time shut off with battery out it will go back to booting to the lock screen then dying etc... When I press the buttons to get into recovery it says recovery is loading and then the screen goes black. I swapped batteries and that didn't do anything. I tried pressing the menu button or the home button to try and boot safe mode and it just loads normally not that I think that would help anyway.
Any ideas on things I can try next? What is this odin thing? Would that work for me?
---------- Post added at 07:09 PM ---------- Previous post was at 06:16 PM ----------
Ok... I can get into recovery now and will try a factory reset. Are you sure you are going into recovery correctly. Apparently I was not. Hold volume up power and menu button and when the phone vibrates let go of power only.
Before I do a hard wipe is there any way to get data off the internal memory from recovery mode?
So I got a custom recovery installed, reinstalled stock rom, things worked ok for awhile. Then it started random reboots every 10 mins or so. Now it is back to instant crashing and rebooting. Any idea what could be the issue? I'm assuming at this point it is hardware related. Why can recovery and download mode run consistently without crashing but when an os is fired up it has issues? If it was a hardware issue shouldn't it not work across the board?
So I had Sprint replace my phone on the 8th. I have been using my same batteries (1 stock 1 Anker) and chargers (some stock some not) without issue the past 5 days. I rooted and installed xposed and some modules (original broken phone was never rooted and was completely stock). Things were going great until tonight when it started reboot looping exactly like the old phone. I switched battery and same proble. After I took the battery out and left it out awhile it fired back up but I'm afraid the problem will return. Is it possible that the battery or charger randomly are causing damage to the phone? I only have 14 day warranty on this replacement and need to figure this out.
So things were going well for awhile and then the reboot loops started up again. I did some digging and read that apparently Samsung phones are notorious for sticking power buttons and the symptoms were exactly what I was experiencing. I watched some videos online how to open the phone and clean out the power button but it didn't make a difference. I then read that squeezing the connector for the power button with a pair of pliers sometimes does the trick. Not for me. So finally since I'm not under warranty, have no insurance, and the phone wasn't working anyway, I just ripped the white plastic part of the power button right off. Well, that seemed to do the trick. Phone immediately fired back up without issue and has been going strong. I glued a small thin piece of plastic where the old one used to be and I am back in action. If my little plastic piece solution eventually fails or breaks off I will consider soldering on a new button but so far so good.
If you have tried everything else, and are looking for last resort, try cleaning the power button with some alcohol, and if that fails, rip off that power button! Here is the video that gave me the idea: https://www.youtube.com/watch?v=3Glllc7bEJs and here are some other power button videos: https://www.youtube.com/results?search_query=s4%20power%20button&search_type=&aq=f&oq=
I had an alarm app give me an alarm last night but I was busy in another app and dismissed the alarm in a way that the sound was still going. The only thing I thought to do was to do a reboot of the phone. I gave it a few minutes and when I pulled it from my pocket I noticed that it had not rebooted. So I held the power button for a few seconds and waited for that vibrate then the "Custom" screen.
Nothing.
Held the power button for about 30 seconds.
Nothing.
Good battery, at least 75% before this happened. No sweat. I have a spare battery that I know is 100%. When I put that one in, the phone immediately did a vibrate and gave me the "Custom" screen. Then dead. Power button did nothing.
Pulled the battery and upon insertion, I got that vibrate again. But this time I held Volume+ and I get that tiny blue bootloader message at the top of the screen for a half a second. Then dead. Tried it again and this time did Volume-, this time I got download mode for half a second. Then dead.
Tried all this with power plugged in and get even less. Nothing.
Connected it to a PC (OEM cord straight into the motherboard) and got nothing. No charging LED, no sound from the PC upon plugging. Nothing new showed up in Device Manager.
Did I just do the "Low Effort Brick" method just by rebooting? I have had this thing for a few years, running CWM then TWRP. Several ROMs in the past, xposed, done it all and never once even had a boot loop. Now I have a brick because I rebooted a phone that had been VERY stable for weeks (on Dan's GPE ROM)?
I am not so concerned about the device, I actually ordered a LG G4 already. What I REALLY want is the autobackup of Tasker that is in the internal storage. I know I have a TiBu of everything on the microSD and a TWRP is on there too. But both are a few days old and I have made many changes to Tasker in the past few days. Tasker updates a backup every time you leave the app, so I know I have a very recent file in there. But how do I get it?
It's not bricked. The power button on some S4's are janky. Mine did the same thing for a while. You can try smacking the power button on the corner of a desk or something but otherwise either just keep pulling the battery and trying, try opening it and cleaning the switch, or try replacing the switch.
It's hardware issue with power button. I've got the same issue with my S4. The only solution is to replace the button.
Good advice. Found a few YouTube videos that are pretty close the issue that I have. I shall do some work on this this weekend. Thanks for taking the time to respond!
Hell yeah. Effin HELL YEA. Found a few YouTube walk through videos and got down to the switch. Using my ever-awesome Simpson 260, I was able to determine that the power switch was bad. I exercised it a few dozen times and then it went open. Roughed everything back together (without screws) and got a boot.
Immediately made a TiBu of everything. I will also make a TWRP as soon as that is done. Now I have to source a power switch. I should have no problem replacing the switch. I have a fantastic solder station at work and a 20X magnifier. This shall be my crutch until the LG G4 arrives.
Thanks again for the advice. Proof again that this is a real community.
Side note: I went to AT&T to get my old Vivid back into action to replace my S4. When I mentioned that the device was rooted, they replied with some statement that my "jailbreaking" the device is what caused the failure. I asked if she knew what rooting was, and she said "yeah...jailbreaking". I asked her if she knew what an "unlocked bootloader" was and she just glazed over, mouth open. When I told her that the device has been rooted for years with no problem, she insisted that the problem happened when I "jailbroke" it.
Hello,
So my Nexus 6P turned off randomly and then would not turn back on. It would come on and show Google and sometimes even let me enter my pin to start the phone. But it constantly would freeze during start up and just shut down. I got into the recovery and factory reset my phone and now it won't even turn on. I hold the power and it doesn't do anything. I've tried the boot loader and such but it won't turn on at all. Any ideas on what I could do? Thanks!
edlovereze said:
Hello,
So my Nexus 6P turned off randomly and then would not turn back on. It would come on and show Google and sometimes even let me enter my pin to start the phone. But it constantly would freeze during start up and just shut down. I got into the recovery and factory reset my phone and now it won't even turn on. I hold the power and it doesn't do anything. I've tried the boot loader and such but it won't turn on at all. Any ideas on what I could do? Thanks!
Click to expand...
Click to collapse
Sounds like you may have more than one problem, but many have been able to get a dead phone to start by holding the power button down for a very long time, sometimes 2 minutes or more. If it doesn't start, fully charge it and try the power button again. Assuming you are stock with a locked boot loader.... you didn't mention.
My phone is stock with a locked boot loader. I held the button for over 5 minutes and got nothing. I'm wondering if Google would be willing to help me out. Unless anyone has other ideas
It's hopeless. Don't waste your time trying to revive. Contact Huawei regardless of date of purchase.
If it won't power on it's either not charged, a bad power button, or something with pcm. Which is on Motherboard.
Most common scenario is a bad power button because it's most used breakable part. That won't allow the board to receive power or not enough power if it's shorted.
Dunno if you've poked around the interwebs some more regarding this, but I've been slammed with the N6P bootloop error (which appears might be part of your problem) and I found a stop-gap solution. If you feel like you've got nothing to lose, you can try what I've done: Make sure the phone has a little charge, hold it with a hot mitt from your kitchen, and blast the back of your N6P in the region between the camera lens and the fingerprint sensor with a hairdryer. Doing so will trip the big cluster off, which is the source of the bootloop problem. If you can get it to boot to the Google logo, applying the heat for the right amount of time (maybe not too long.. 2-4 minutes tops) may cause it to make it to the spinning color graphics and beyond.
I've been able to resurrect my phone doing this, but only to back it up and do very simple tasks. The moment I do something processor-intensive (Waze, YouTube, etc) it immediately crashes and bootloops again. The only solution beyond this is to unlock your bootloader, download EX Kernel manager and use it to completely disable the big cluster. Then your phone will likely be reliable, but extremely hobbled.
I bought from Best Buy about 16 months ago, so both Google and Huawei have been utterly useless, which is infuriating. Shenanigans like this are criminal. This is my 3rd Nexus phone and I'm considering abandoning Android altogether after this experience.