Database Users

RA 1.6.2 SDcard woes.

Alright, So I'm trying to enable JIT on my phone, but I'm running into a problem where when I cd into /sdcard and try to ls, the directory shows as empty. Trying to cd into anything gives me this
Code:
/sbin/sh: cd: can't cd to /sdcard/dusted
My question is, what are the commands to mount my sdcard with -rw permissions?

abcdfv said:
Alright, So I'm trying to enable JIT on my phone, but I'm running into a problem where when I cd into /sdcard and try to ls, the directory shows as empty. Trying to cd into anything gives me this
Code:
/sbin/sh: cd: can't cd to /sdcard/dusted
My question is, what are the commands to mount my sdcard with -rw permissions?
Click to expand...
Click to collapse
try mount -a
or
try mount /sdcard/

mount -a returns
Code:
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: no such file or directory
mount /sdcard returns
Code:
mount: mounting /dev/block/mmcblk0p1 on /sdcard failed: device or resource busy

Then try:
Code:
mkdir /system/sd
mount -a

Code:
mkdir /system/sd
mkdir: canot create directory '/system/sd': File exists
Tried a different SDcard. Same problem.

Also, the JIT guide can be misleading. At first I thought it meant to do all of this while the phone is in recovery. Needless to say, that does not work.
I got the same results as you, so maybe that is the problem.
The phone needs to be fully booted.

whats happens when you do a 'adb remount'?

Code:
remount failed: invalid argument

Tried killing the adb server and restarting it. Still a no go.

abcdfv said:
Code:
mkdir /system/sd
mkdir: canot create directory '/system/sd': File exists
Tried a different SDcard. Same problem.
Click to expand...
Click to collapse
Looks like the ext partition on the SD card is missing. Did you repartition adding both ext and swap?

I don't run a2sd

abcdfv said:
I don't run a2sd
Click to expand...
Click to collapse
Then it's not going to mount /system/sd since that is a2sd.

I'm not trying to mount an ext partition. I'm trying to mount the sdcard itself.

abcdfv said:
I'm not trying to mount an ext partition. I'm trying to mount the sdcard itself.
Click to expand...
Click to collapse
Your errors above seem to indicate that the sd card is mounted. As to wether its readable is another matter. What do you get when your do a:
Code:
ls /sdcard
Have you tried rebooting into recovery?

Boot the phone into Android.
Open ADB and type mount.
Paste the results here.

From Android
Code:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>cd /android/tools
C:\android\tools>adb shell
# mount
mount
rootfs / rootfs ro 0 0
tmpfs /dev tmpfs rw,mode=755 0 0
devpts /dev/pts devpts rw,mode=600 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
none /dev/cpuctl cgroup rw,cpu 0 0
/dev/block/mtdblock3 /system yaffs2 ro 0 0
/dev/block/mtdblock5 /data yaffs2 rw,nosuid,nodev 0 0
/dev/block/mtdblock4 /cache yaffs2 rw,nosuid,nodev 0 0
/dev/block//vold/179:1 /sdcard vfat rw,dirsync,nosuid,nodev,noexec,uid=1000,gid=
1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,s
hortname=mixed,utf8,errors=remount-ro 0 0
#
From recovery
Code:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>cd /android/tools
C:\android\tools>adb shell
/ # mount
mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,mode=755)
devpts on /dev/pts type devpts (rw,mode=600)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
/dev/block/mtdblock4 on /cache type yaffs2 (rw,nodev,noatime,nodiratime)
/ #

mounting /system as rw?

this seems simple enough since we can do it with all other android devices that have root. but it isnt, apparently. because we're running with a stock bootloader/SPL/recovery/ROM, adb wont run with SU permissions. this means abd remount doesnt work.
also, we dont know what the directory is to mount from /dev (i.e. on the G1 it was /dev/block/mtdblock3) to get system to mount as rw.
my point in asking is that i'm trying to do something i'm sure a lot of other people would like as well. custom ringtones in /system/media/audio instead of on the SD card. why? because with the ringtones on the SD card, media scanner picks them up every time and lumps them in with the actual music you have on your sd card. ugh.
so, as soon as someone can figure this out, i'd love to know how to do it so I can push the ringtones or cp them using busybox. anyone who can help...well, lets get it going.

Code:
C:\android-sdk-windows\tools>adb shell
$ su -
su -
#
# mount
mount
rootfs / rootfs ro 0 0
tmpfs /dev tmpfs rw,mode=755 0 0
devpts /dev/pts devpts rw,mode=600 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
/dev/block/stl6 /mnt/.lfs j4fs rw 0 0
tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
none /dev/cpuctl cgroup rw,cpu 0 0
/dev/block/stl9 /system rfs rw,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/mmcblk0p2 /data rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/mmcblk0p3 /data_tmo rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl10 /dbdata rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl11 /cache rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl3 /efs rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
#
busybox mount -o rw,remount /dev/block/stl9 /system
#
once you get there, just copy whatever you want wherever you want
something like
Code:
busybox cp /sdcard/sd/myfile.mp3 /system/media/audio/

mucho kudos! i have a feeling this will come in handy for a lot of people in the future.

cojonesx said:
Code:
C:\android-sdk-windows\tools>adb shell
$ su -
su -
#
# mount
mount
rootfs / rootfs ro 0 0
tmpfs /dev tmpfs rw,mode=755 0 0
devpts /dev/pts devpts rw,mode=600 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
/dev/block/stl6 /mnt/.lfs j4fs rw 0 0
tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
none /dev/cpuctl cgroup rw,cpu 0 0
/dev/block/stl9 /system rfs rw,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/mmcblk0p2 /data rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/mmcblk0p3 /data_tmo rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl10 /dbdata rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl11 /cache rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl3 /efs rfs rw,nosuid,nodev,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
#
busybox mount -o rw,remount /dev/block/stl9 /system
#
once you get there, just copy whatever you want wherever you want
something like
Code:
busybox cp /sdcard/sd/myfile.mp3 /system/media/audio/
Click to expand...
Click to collapse
Whoa... Do I need to do all this just to push a apk as system app?

No, all you need to do is:
adb shell (ony if you're using adb, if you're using terminal, skip this command)
su
busybox mount -o rw,remount /dev/block/stl9 /system
busybox cp /(location of the app here)/app.apk /system/app/
reboot
now, depending on where you have the app:
if its on the 14gb storage, it'll just be /sdcard/app.apk
if its on your actual sd card, it'll be /sdcard/sd/app.apk
all the stuff in the code post between # mount and the next # is what gets printed from the mount command. not actual commands.

adb remount doesn't work? I have been using it to delete stuff out of the /system/app directory... Maybe I am not getting what you are referring to.
??

hah2110 said:
Whoa... Do I need to do all this just to push a apk as system app?
Click to expand...
Click to collapse
Didn't mean to scare anyone with all that text, kusotare is right, the mount command shows what is currently mounted and where, its how I knew where to remount /system. Just used it as an example to teach as well

ahh, never mind, I see the issue now
So adb push to /system/* is never going to work until we get some custom roms then?

precisely t1n0m3n.

I used buysbox to try and re-install dlna.apk/odex and my phone boots normal, but wont every "wake up" after the Galaxy s screen, it just stays black, but the home keys are responsive? Did i screw something up?

kusotare said:
No, all you need to do is:
adb shell (ony if you're using adb, if you're using terminal, skip this command)
su
busybox mount -o rw,remount /dev/block/stl9 /system
busybox cp /(location of the app here)/app.apk /system/app/
reboot
now, depending on where you have the app:
if its on the 14gb storage, it'll just be /sdcard/app.apk
if its on your actual sd card, it'll be /sdcard/sd/app.apk
all the stuff in the code post between # mount and the next # is what gets printed from the mount command. not actual commands.
Click to expand...
Click to collapse
Tried doing this. I have com.neevo.mobiledefense.apk in my adb folder so on my N1, I never actually had to type a location of the file but whether I use the location or not, I get file not found... Will my N1 mobiledefense system app *.zip work on this phone or no since the directories are different?

[Q] Locating a system backup.

Alright so I am trying to help out and get a backup of /system from my GF's samsung intercept. A dev over on SDX managed to flash a custom recovery to the phone. There are no issues from what I can find with the recovery accept for the fact that I cannot backup /system....or atleast I cannot find where it backs it up.
The recovery says it backs up successfully but it should be on the SD card in a folder named sdx but there is no folder. The dev told me to open up a terminal emulator and type mount. This is what it spit out:
ootfs / rootfs ro 0 0
mpfs /dev tmpfs rw,mode=755 0 0
evpts /dev/pts devpts rw,mode=600 0
roc /proc proc rw 0 0
ysfs /sys sysfs rw 0 0
mpfs /sqlite_stmt_journals tmpfs rw,
dev/stl5 /system rfs ro,codepage=utf
check=no 0 0
dev/stl6 /data rfs rw,nosuid,nodev,c
=128,xattr,check=no 0 0
dev/stl7 /cache rfs rw,nosuid,nodev,
)=128,xattr,check=no 0 0
mpfs /sdx tmpfs rw,size=152k 0 0
Can I get any help on how to find this backup?

Spectral8x said:
Alright so I am trying to help out and get a backup of /system from my GF's samsung intercept. A dev over on SDX managed to flash a custom recovery to the phone. There are no issues from what I can find with the recovery accept for the fact that I cannot backup /system....or atleast I cannot find where it backs it up.
The recovery says it backs up successfully but it should be on the SD card in a folder named sdx but there is no folder. The dev told me to open up a terminal emulator and type mount. This is what it spit out:
ootfs / rootfs ro 0 0
mpfs /dev tmpfs rw,mode=755 0 0
evpts /dev/pts devpts rw,mode=600 0
roc /proc proc rw 0 0
ysfs /sys sysfs rw 0 0
mpfs /sqlite_stmt_journals tmpfs rw,
dev/stl5 /system rfs ro,codepage=utf
check=no 0 0
dev/stl6 /data rfs rw,nosuid,nodev,c
=128,xattr,check=no 0 0
dev/stl7 /cache rfs rw,nosuid,nodev,
)=128,xattr,check=no 0 0
mpfs /sdx tmpfs rw,size=152k 0 0
Can I get any help on how to find this backup?
Click to expand...
Click to collapse
Ok I did see this issue as well rooted and custom kernel on intercept but does not create the folders
go to the root of your sdcard and create the following folders
/sdx
and inside that folder create 2 folders /backup and /zip
reboot the phone and let it come back up, then reboot into recovery and choose the option for backup and then backup both /system and /data, then when you go back to the sdcard, the .tar file will be in the backup folder

[Q] [SOLVED] Original sdcard mount point

Hey everyone,
This is pretty embarrassing... I successfully ran the following:
Code:
mount -w -t vfat /dev/block/mmcblk0p12 /mnt/sdcard
But now I cannot revert back to the original mount point of "/sdcard"
I've even tried umount-ing with the force-flag and still no luck
I'd appreciate any help at all, thanks

It *might* revert when you reboot unless you overwrote something.
Why are you screwing with this anyways?

Thanks for the quick reply.
Rebooting didn't change it.
Edit: Below is fixed, no longer relevant
Except, now I'm noticing I have to root with SuperOneClick each time I reboot to get su access.
The only thing I did after running the mount command, was install BusyBox

Wait, what? Since when does Kindle Fire have an SD Card? I'm so confused

jasongw said:
Wait, what? Since when does Kindle Fire have an SD Card? I'm so confused
Click to expand...
Click to collapse
There's an "sdcard" partition. It's whats mounted when you attach your KF to your PC... But no, there's no removable SD Card

Not sure 100% what the correct command to remount the sdcard partition is so can't say much right now.
check under /proc/mounts and also under /proc/emmc (open them as a text file) and paste what it says.

Didn't see a /proc/emmc but here's what I found
Contents of /proc/mounts:
Code:
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/sys/kernel/debug /sys/kernel/debug debugfs rw,relatime 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/system /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/userdata /data ext4 rw,nosuid,nodev,noatime,errors=continue,barrier=1,data=ordered 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/cache /cache ext4 rw,nosuid,nodev,noatime,errors=continue,barrier=1,data=ordered 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/splash /dropbox ext4 rw,nosuid,nodev,noatime,errors=continue,barrier=1,data=ordered 0 0
/dev/block/vold/179:12[B][COLOR="Red"] /mnt/sdcard[/COLOR][/B] vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:12 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs[B][COLOR="Red"] /mnt/sdcard/[/COLOR][/B].android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
/dev/block/dm-0 /mnt/asec/com.angrymobgames.muffinknight3rdparty-1 vfat ro,dirsync,nosuid,nodev,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0

I hope you can solve your problem,good luck

looks like you need to mount /dev/block/vold/179:12 so rerun the command you were doing with that instead.

I installed Astro File Manager, through which I can view the sdcard partition's contents in "/sdcard" as well as "/mnt/sdcard"
I only seem to have issues viewing contents of location "/sdcard" in adb shell.
At this point I'm not too terribly concerned about it. Maybe I'm making a deal out of nothing...
I do appreciate your help though.
And if anyone knows the exact solution, then please speak up
EDIT:
Returns nothing:
Code:
ls /sdcard
Returns contents:
Code:
cd /sdcard
ls
I guess nothing was ever wrong after all.. Now I feel extra-dumb

[Q] Thinkpad stuck semi-rooted (Help!) EDIT: SOLVED

Hey all. I have a 32 GB US TPT that was on 0075. I rooted it using djrbliss's method, and at some point managed to screw up my systemui.apk. I couldn't get it working again, so I attempted a factory reset. For some reason, that left Superuser in my list of apps, and Superuser will say that it has granted apps superuser permission, but whenever I try to do anything that would require root (like delete a system app), it doesn't work.
Also, I've tried to reinstall stock 0075 from a zip, but when I did that it said something about the update check failing on account of missing system apps.
So I'm kind of stuck. How do I fix this? I want to get the tablet fully re-rooted so I can install CWM and that 0075 no bloat nandroid backup.

I would first try to run the root script from djrbliss again.
Without root you are not able to restore the system-apps but they are mandatory for any update.

I forgot to mention that I did try re-running the root script. It gave me error messages saying it was unable to copy any of the stuff like superuser.apk.

Try the following. As you still can do su and promt changes to #.
Copy busybox to your device:
1. adb push busybox /data/local/tmp (busybox is located in djrbliss root script)
2. adb shell
3. su
4. cd /data/local/tmp
5. ls (to see if busybox is there)
6. busybox mount -o rw,remount /system
7. mount (to see if /system is mounted as RW)

Did all that, busybox is there, but I don't see /system at all in the list that comes up after mount. Did you mean sysfs? That one says rw.
PS: sorry for being generally clueless about this stuff. This is my first time doing anything much under the hood with Android.
Edit: another curious issue I just noticed: the tablet connects to my computer just fine via MTP, and shows up under adb devices, but when I select mount the SD card, the tablet immediately reboots. Also, it doesn't show up under adb devices if I don't select either, but that might be normal.

qdmcgraw said:
Did all that, busybox is there, but I don't see /system at all in the list that comes up after mount. Did you mean sysfs? That one says rw.
PS: sorry for being generally clueless about this stuff. This is my first time doing anything much under the hood with Android.
Click to expand...
Click to collapse
Please post output from mount.
It should look like this for system:
/dev/block/mmcblk0p3 /system ext4 rw,relatime,barrier=1,data=ordered 0 0

Exe557 said:
Please post output from mount.
It should look like this for system:
/dev/block/mmcblk0p3 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
Click to expand...
Click to collapse
Oh, yeah, that's there, but it's listed as ro. Everything else the same as what you wrote.

Quiet hard to help without supplying output from shell.
What do you get after typing busybox mount -o rw,remount /system?

Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
43c71c543bf7457 device
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb push busybox /data
/local/tmp
1317 KB/s (1867568 bytes in 1.384s)
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell
$ su
su
# cd /data/local/tmp
cd /data/local/tmp
# ls
ls
busybox
# busybox mount -o rw,remount /system
busybox mount -o rw,remount /system
# mount
mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p3 /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p4 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered
0 0
/dev/block/mmcblk0p6 /mnt/pia ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordere
d 0 0
/dev/block/mmcblk0p9 /mnt/persdata ext4 rw,nosuid,nodev,noatime,barrier=1,data=o
rdered 0 0
/dev/block/mmcblk0p10 /data ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered
0 0
/dev/fuse /mnt/sdcard fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,d
efault_permissions,allow_other 0 0
/dev/block/loop0 /persdata/absolute ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:9 /mnt/external_sd vfat rw,dirsync,nosuid,nodev,noexec,relat
ime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,ioch
arset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0

Looks ok and it accept the command without any errors.
Try this please and post output:
busybox mount -o remount,rw /system; mv system/bin/aba system/bin/aba_bak

Have you tried installing Titanium Backup and running it? I remember one time when I ran TB after running the YAREFTP script to get OTA2 rooted. Titanium Backup reported that SuperUser was installed but it's binaries were incorrect (or something to that effect) and offered to fix it for me. Root seemed fine after that.
Might be worth a try. Also, did you re-install superuser and then run it?

Exe557 said:
Looks ok and it accept the command without any errors.
Try this please and post output:
busybox mount -o remount,rw /system; mv system/bin/aba system/bin/aba_bak
Click to expand...
Click to collapse
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb devices
List of devices attached
43c71c543bf7457 device
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell
$ su
su
# cd /data/local/tmp
cd /data/local/tmp
# ls
ls
busybox
# busybox mount -o remount,rw /system; mv system/bin/aba system/bin/aba_bak
busybox mount -o remount,rw /system; mv system/bin/aba system/bin/aba_bak
failed on 'system/bin/aba' - No such file or directory
#

Mhm, so looks like it is not there and it will not prevent your /system to remount as rw.
I'm out of ideas.

pwstein said:
Have you tried installing Titanium Backup and running it? I remember one time when I ran TB after running the YAREFTP script to get OTA2 rooted. Titanium Backup reported that SuperUser was installed but it's binaries were incorrect (or something to that effect) and offered to fix it for me. Root seemed fine after that.
Might be worth a try. Also, did you re-install superuser and then run it?
Click to expand...
Click to collapse
I installed Titanium Backup just now, but it didn't give me any error message like that. I don't know how I'd go about reinstalling Superuser.
Exe557 said:
Mhm, so looks like it is not there and it will not prevent your /system to remount as rw.
I'm out of ideas.
Click to expand...
Click to collapse
Damn, well thanks anyway. I appreciate you helping out.

Damn, I see the error now
As your are in /data/local/tmp mv system/bin/aba system/bin/aba_bak will not work.
So it should be:
busybox mount -o remount,rw /system; mv /system/bin/aba /system/bin/aba_bak

I think that one went through. It just accepted the command with no error message.

If it goes through it should be mounted as rw. Otherwise it is impossible to modify data on /system folder.
Check mount

Exe557 said:
If it goes through it should be mounted as rw. Otherwise it is impossible to modify data on /system folder.
Check mount
Click to expand...
Click to collapse
Yep, it appears to be mounted as rw now
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell
$ su
su
# cd /data/local/tmp
cd /data/local/tmp
# ls
ls
busybox
# busybox mount -o remount,rw /system; mv /system/bin/aba /system/bin/aba_bak
busybox mount -o remount,rw /system; mv /system/bin/aba /system/bin/aba_bak
# mount
mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p3 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p4 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered
0 0
/dev/block/mmcblk0p6 /mnt/pia ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordere
d 0 0
/dev/block/mmcblk0p9 /mnt/persdata ext4 rw,nosuid,nodev,noatime,barrier=1,data=o
rdered 0 0
/dev/block/mmcblk0p10 /data ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered
0 0
/dev/fuse /mnt/sdcard fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,d
efault_permissions,allow_other 0 0
/dev/block/loop0 /persdata/absolute ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:9 /mnt/external_sd vfat rw,dirsync,nosuid,nodev,noexec,relat
ime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,ioch
arset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
#
So does that mean everything is working properly?

So far it looks ok. As it is mounted as RW you can install CWM recovery now.
Edit: Keep in mind to use correct CWM image for your TPT. It has to fit region and size.
Some people bricked the tablet while using the wrong image.

Exe557 said:
So far it looks ok. As it is mounted as RW you can install CWM recovery now.
Click to expand...
Click to collapse
I did just now. It worked! Thank you so much!