Related
I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!
Nolimit1211 said:
I was updating my MDA to WM6 when my computer froze in the middle of updating, so i unhooked the MDA and resset it, now its stuck on the splash screen!!!! no matter what I do! and activesync will not recogizine it also!! ive tried hard reset be all its saying issomething about a FAT partition, it can still go into bootloader mode so i know its not bricked, its a G3 model...SOmeone PLEASE help!!!!!
Click to expand...
Click to collapse
Read the wiki for wizard, I am sure God will help u if u help urself. I think it can be restored by going into the bootloader.
NEww problem
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!
Nolimit1211 said:
Thanks, did some reading and solved it, but than i wanted a new rom and when i installed it I started and it stuck at splashscreen again, only now hard reset fails and now matter what original tmobile rom i flash it to its still stuck!!! Please help!
Click to expand...
Click to collapse
What steps have you taken, and where are you stuck at now? Can you bring it into bootloader mode? What IPL/SPL? You said its G3, is it CID unlocked?
So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!
Nolimit1211 said:
So far i have flashed it with the original Tmobile rom and some others through the bootloader mode, but even after it says flash completed I still get stuck on the splash screen, my ip/spl are both 2.26, and it is CID locked, and at the time i dont had a mini sd card to perform an sd rom upgrade, god i wish i just stuck with my original rom, please help!
Click to expand...
Click to collapse
So you've flashed back the oroginal tmobile rom, is that also 2.26? I presume you are using the standard update util for the flash and it says completed? I've seen the update util do that (say 100% complete but not actually update anything) .. this behaviour is documented somewhere in this forum (took me about 8 flashes and a lot of confusion and frustration before I found the forum threads!) this only happened on a CID locked phone flashing a custom rom.. i don't think that happens with original vendor roms..
Can't say I have had the same problem. From looking at the forum, most people who get stuck like this can flash the wizard love rom and get back on. For me, I have mostly been able to get back to the original rom when needed, except when I bricked my G4 phone (before G3/G4 was well understood)...
Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?
p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?
Nolimit1211 said:
Yes sir that is also a 2.26 and yes im using the standerd methodhat is this wiazrd love rom your talking about though? Maybe i should flash it to that instead of the original tmobile rom?
Click to expand...
Click to collapse
Like I said I had not used it myself, but there are many references to it in the forums.
When you say you are stuck, does it load the Windows splash screen or does it get stuck on the IPL/SPL screen?
It gets stuck on the IPL/SPL screen
Nolimit1211 said:
p.s if this only happens on cid locked phones, is there anyway to unlock my cid while in bootloader mode?
Click to expand...
Click to collapse
No you can't CID unlock in bootloader mode.. there are a number of threads on how to CID unlock...
Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?
Nolimit1211 said:
Thanks for you assisting me sooo much, im going to try and flash with the love rom, do you have any other tips?
Click to expand...
Click to collapse
Only that by all accounts, you should be able to get a working phone again if you can get into bootloader mode.. unless you have hardware issues. The other item that may be of problem is the extended rom which can get corrupted.
Sorry I couldn't be of more help. Good luck.
Can anyone else please help, youll be a god to me if you can help me get my MDA up and running again!!!!
I failed 95% during my flashing of firmware. My phone stays as the uspl screen everytime i on it..
Brought it to the service centre for repair, but says it doesn't cover warranty for phones that have been unlocked..
flash original firmware
how to flash original when my active sync is not able to connect to the phone
you dont need activesync, just put it in bootloader mode (camera+power+reset) before the flash.
twolf said:
you dont need activesync, just put it in bootloader mode (camera+power+reset) before the flash.
Click to expand...
Click to collapse
what do you mean before the flash? when i on my phone, i'n alreading in the uspl screen already..
pls advise
leskali said:
what do you mean before the flash? when i on my phone, i'n alreading in the uspl screen already..
pls advise
Click to expand...
Click to collapse
When you are already in uspl mode. then just try to flash the phone again.
thanks guys for the help. It worked.
But after now, i am not able to hardspl my phone.. can someone advice..
Were can we get the original firmware? I have made some "tuning" to my phone and now the camera is not working..
xmsmmgrs said:
Were can we get the original firmware? I have made some "tuning" to my phone and now the camera is not working..
Click to expand...
Click to collapse
you can get it from this place http://forum.xda-developers.com/showthread.php?t=395945 niki-relock.zip
Help! when battery is inserted, I get a white screen with this message
flash type 5510bcad power reason 6
Boot_w_warm_reset
I have flashed an official ROM but still no luck, any help please?
finesse said:
Help! when battery is inserted, I get a white screen with this message
flash type 5510bcad power reason 6
Boot_w_warm_reset
I have flashed an official ROM but still no luck, any help please?
Click to expand...
Click to collapse
that sounds bad. Id say either faulty battery, or more likely faulty power circuitry inside teh phone.
Warranty would be my first stop.
Thanks for your reply, now I am stuck in bootloader.
I have tried to flash an official from but no luck.....
Any ideas, please help. From searching, everyone fixed this similar issue by flashing an official rom but in my case, it is not working.
I have tried task29 no luck.....
finesse said:
Thanks for your reply, now I am stuck in bootloader.
I have tried to flash an official from but no luck.....
Any ideas, please help. From searching, everyone fixed this similar issue by flashing an official rom but in my case, it is not working.
I have tried task29 no luck.....
Click to expand...
Click to collapse
It has to be the correct official rom, unless you have hspl installed. Example, if your phone is rom locked to O2 (not sim lock, that doesnt matter) then opnly the o2 official rom will work, (unless you have hspl installed)
Yes, I have HSPL installed, (I went back to HSPL 1.42 and the I am trying to flash the latest t-mobile rom rom the HTC site.
How do I get a gold card?
I am in the UK, what is the correct radio and t-mobile rom for me please
Any help please?
did you repaired this phone?
i have same situation:/
I sent it back to the repair centre
HSPL/SSPL
when you flash official ROM you must install SSPL. When you flash custom ROM install HSPL.
I need help please my htc is stcuk in bootloader!! This is the first time i was flashing my phone.... And there is not custom rom yet installed its just the process of getting hspl.. The situation was i was connceting it to hspl and when it was connecting i accidentally disconnected it! Now its stuck on bootloader!! And it wont connect to active sync!! The spl is 2.10.000 and white part of the tri coulor saids usb. Now can someone please help me!!! I really like the phone and im trying not to lose it!! Please tell me if my phone is broken or not.. And if it isnt please let me know how i can fix it!!! Please need quick response!! I CANNOT ACCESS MY PHONE AT ALL ITS JUST IN BOOTLOADER!
jash23 said:
I need help please my htc is stcuk in bootloader!! This is the first time i was flashing my phone.... And there is not custom rom yet installed its just the process of getting hspl.. The situation was i was connceting it to hspl and when it was connecting i accidentally disconnected it! Now its stuck on bootloader!! And it wont connect to active sync!! The spl is 2.10.000 and white part of the tri coulor saids usb. Now can someone please help me!!! I really like the phone and im trying not to lose it!! Please tell me if my phone is broken or not.. And if it isnt please let me know how i can fix it!!! Please need quick response!! I CANNOT ACCESS MY PHONE AT ALL ITS JUST IN BOOTLOADER!
Click to expand...
Click to collapse
Flash a stock ROM first, then re-flash the SPL. You, sir, got lucky. If that thing had stopped while it was actually flashing, you'd have a brick.
bro uhm can u like send me instructions for it?? and the files for the stock rom.. cause again this is my first time and id really appreciate it if yu would... and btw i used hspl to try to flash it... and everytime i tried to reflash it without a "stock ROM" it saids error bad spl.... so i dont know what to do.. but u said to try to reflash it with a stock rom so if u can tell me how to do that,, that would be great.. btw my phone is not bricked right???
jash23 said:
bro uhm can u like send me instructions for it?? and the files for the stock rom.. cause again this is my first time and id really appreciate it if yu would... and btw i used hspl to try to flash it... and everytime i tried to reflash it without a "stock ROM" it saids error bad spl.... so i dont know what to do.. but u said to try to reflash it with a stock rom so if u can tell me how to do that,, that would be great.. btw my phone is not bricked right???
Click to expand...
Click to collapse
Nope. As long as you can see the bootloader, you ain't screwed
Ill post a detailed post in a few minutes
What provider is your HD2?
T mobile... And btw I can't connect to my active sync swell is that ok?
uhm can u send my the details?? im t mobile.... my provider is t mobile... and i cant connect to active sync.... just letting u know
it would help everyone help you if you would update your info with cellphone provider, country, etc.
I'm guessing tmobile usa right???
Ok, go here for a stock ROM (you might have to register):
http://forum.ppcgeeks.com/1664046-post1.html
In that post, download the 2.13 stockrom.
Connect your phone via usb to your computer while in bootloader (should say usb at the bottom). Your phone cannot connect via active sync because you probably don't have a ROM on it at the moment.
Unzip and run the Rom Update Utility (RUU) and follow the instructions. This will take you back to stock.
After doing this, I suggest your read here:
http://forum.xda-developers.com/showthread.php?t=653614
If you are not tmobile usa hd2, then disregard above and find stock ROM for your carrier.
uh i am usa t mobile.. btw can u add me on aim??? if u have one so u can like help me.. pls.. my aim is [email protected]
jash23 said:
uh i am usa t mobile.. btw can u add me on aim??? if u have one so u can like help me.. pls.. my aim is [email protected]
Click to expand...
Click to collapse
sorry, I don't instant message. Just follow the instructions and you should be fine.
ok but ur in here just incase i need questions right?? and btw do i need to take my sim and sd card out of the phone when i do this??
btw bro the 2.13 rom downloaded really fast.. is that ok???
uh do i really need to flash it again for it to work?? or after i finish flashing stock rom will i be able to go back to my normal phone again.. cause after all of this im not that interested in custom roms.. i just wanna get my phone back to old wm6.5
hey i did the steps u told me and its still the same ****.. but i can go to bootloader.. now do i have to flash it regular?? cause i still cant access my phone.. but i went through the whole process
bro when i tried to flash it again.. its said that bad spl version.... should i try the process again???
jash23 said:
bro when i tried to flash it again.. its said that bad spl version.... should i try the process again???
Click to expand...
Click to collapse
you may have corrupted the SPL with that bad flash.
nrfitchett4 said:
it would help everyone help you if you would update your info with cellphone provider, country, etc.
I'm guessing tmobile usa right???
Ok, go here for a stock ROM (you might have to register):
http://forum.ppcgeeks.com/1664046-post1.html
In that post, download the 2.13 stockrom.
Connect your phone via usb to your computer while in bootloader (should say usb at the bottom). Your phone cannot connect via active sync because you probably don't have a ROM on it at the moment.
Unzip and run the Rom Update Utility (RUU) and follow the instructions. This will take you back to stock.
After doing this, I suggest your read here:
http://forum.xda-developers.com/showthread.php?t=653614
If you are not tmobile usa hd2, then disregard above and find stock ROM for your carrier.
Click to expand...
Click to collapse
uhm i also did the ruu thing but i dont think it was my spl.. cause my spl that said on the bootloader screen saids 2.10 but you told me to flash it using 2.13 stock rom.... i tried it but it did not fix the problem... my htc is tmobile usa btw... and i tried reflashing it after the stock rom flash and it still doesnt work. it saids error bad spl when i try to reflash it using hardspl... do i need to use a different stock rom? let me know plz.. email me my email is [email protected]
rr5678 said:
you may have corrupted the SPL with that bad flash.
Click to expand...
Click to collapse
uhm is there anyway i can fix that corrupt spl and still get my phone to start working again??? please let me know.. cause like i said this is my first time... and like i accidentally disconnected usb when it was in the middle of connceting in hspl... is there a way i can fix it??? cause u said as long as its in bootloader mode i can fix it still...
I don't know then. When you put it into bootloader and run the RUU what happens? Does it start then error out at a percentage? Not start at all?
nrfitchett4 said:
I don't know then. When you put it into bootloader and run the RUU what happens? Does it start then error out at a percentage? Not start at all?
Click to expand...
Click to collapse
no bro it went through the whole ruu process... without active sync though cause again i cant connect to active sync... then once i went through the RUU process it didnt do anything.. my spl still said 2.10 in the bootloader screen.. and i still cant connect to active sync.. thats why i think the hspl part wont work... should i try a different hspl? cause i think this one isnt compatible with mine... and how come my spl on bootloader is still 2.10??? i thought we updated stock rom to 2.13??? but yah it went through the whole RUU process. i even tried doing the RUU PROCESS LIKE 3 MORE TIMES STILL DIDNT WORK... DO I HAVE TO DO THE SD CARD THING OR WHAT???
help mates i have htc hang on logo only..
i did reset clear storage but still same...
i also try to update the rom using sd card.but it not works..
anyone pls help me give idea how to solve this problem..
if i put to recovery mode it showing RED sign and phone..
richard_xcellent said:
help mates i have htc hang on logo only..
i did reset clear storage but still same...
i also try to update the rom using sd card.but it not works..
anyone pls help me give idea how to solve this problem..
if i put to recovery mode it showing RED sign and phone..
Click to expand...
Click to collapse
Have you tried flashing an RUU?
djdevine2 said:
Have you tried flashing an RUU?
Click to expand...
Click to collapse
can u tell how to flash this phone..im newbie on this problem that's why.?
pls let me know how to flash this phone..
tnx in advance....
someone pls help me.............................
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
how can i by pass that red exclamation point to install the file from sd card....
Avid Droidery said:
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
Click to expand...
Click to collapse
i take the phone like this htc hang logo no backup.
can u pls share the rom manager for htc wildfire....
http://www.google.com/gwt/x?gl=us&c...roubleshootingandErrorRecoverySprintTP2MR.pdf
Sorry but I've never heard of anything like that. There should be a recovery tool for windows. I only have this phone so you will have to investigate for yourself.
Keep looking in this thread someone else will come along soon.
I hope this helps.
- Posted via mobile
Aha! I googled it out 4 u i tink...
http://forum.xda-developers.com/showthread.php?t=881138
* edit maybe i shouldnt try to be so helpful
I believe your question can be answered in that forum.
- Posted via mobile
Avid Droidery said:
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
Click to expand...
Click to collapse
how can i know this phone is rooted phone status now is hang on htc logo?
and how to rooted this phone...
can u pls help me bro..tnx
Avid Droidery said:
Aha! I googled it out 4 u i tink...
http://forum.xda-developers.com/showthread.php?t=881138
- Posted via mobile
Click to expand...
Click to collapse
thnk u very much bro...i really apreciate your effort to give me a help...
now downloading ill post wat result...thnk u so much...
I haven't used a windows phone in years! I did not realize your phone was windows until I sent you that link. Please follow the thread and post your questions here -->
http://forum.xda-developers.com/showthread.php?t=881138
- Posted via mobile
It's obvious your phone is not rooted. Try flashing an RUU.
1: Visit here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
2: Get any Eclair RUU,
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
(I am assuming your phone was not operator locked / branded)
3: Connect your Wildfire to your PC, and, run the EXE file. (Note: Make sure the EXE file downloads fully. It is approx 130 MB in size)
4: Let the process complete (Takes ~15 minutes)
If it is successful, check whether the phone starts up properly or not. If it still doesn't, return it to you dealer and claim your warranty.
3xeno said:
It's obvious your phone is not rooted. Try flashing an RUU.
1: Visit here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
2: Get any Eclair RUU,
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
(I am assuming your phone was not operator locked / branded)
3: Connect your Wildfire to your PC, and, run the EXE file. (Note: Make sure the EXE file downloads fully. It is approx 130 MB in size)
4: Let the process complete (Takes ~15 minutes)
If it is successful, check whether the phone starts up properly or not. If it still doesn't, return it to you dealer and claim your warranty.
Click to expand...
Click to collapse
i try this procedure but i get error 131...
how 2 solve this problem...
richard_xcellent said:
i try this procedure but i get error 131...
how 2 solve this problem...
Click to expand...
Click to collapse
Is your phone an operator branded one?
Anyway, to solve that, you will need to create a goldcard. Guide here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
But remember, if your phone is branded, this will remove their ROM and add a stock HTC WWE (Worldwide English) one, probably voiding the warranty if there is no RUU for your carrier.
problem solved i flash with same version..
tnx to all....
Moved thread to general as it is not about android development