Hey Guys,
Anyone has tried TouchXperience on HTC Touch 2 (6.5.3)? It is working? Cozy in my case its not working.
Here is the project http://www.touchxperience.com/en/touchxperience/release-history/86-touchxperience-public-beta-1.html
looks very good, but i dont try it yet... maybe the others im afraid of something wrong.
i tried and result failed! nothing happen. Maybe not able to work with Touch2.
Related
I bought an ATT 8525 a month ago. Suddenly the camera stopped working.
I got the message "Unable to initialize camera. Failed to set up the device".
I looked for this in the web and could not find much help... seems that Cingular may exchange the unit as solution...
Some said it may be a problem with the SD card (2gb from sandisk).
I tried soft reset, hard reset, re-installing ROM (the one from cingular USA) and nothing seemed to work.
I almost gave up when I found this
I followed the steps and not only got the camera to work but I got a very fast , stable and spanish!! version of windows mobile 6. And with a lot of available memory !
Thanks so much to Schap !
hope this would be useful for those having the camera issue!
fabian
ROM Version: Schap's 3.30c
ROM Date: 05/15/07
Radio: 1.41.00.10
Protocol: 32.74.7020.18H
False alarm.
The camera worked for an hour or two... then I started getting the same error.
I did not install anything during that time or change any configuration...
I guess it must be a hardware problem...
any ideas?
Good news!!... (again)
I just downloadedthis cab that says it corrects SC bad management.
After installing the cab... turning off/on the phone... the camera works!!
(I don't know for how long it will work... but at least it is alive! )
Good luck and please share your experience with this cab !!
fabian
doesnt matter since our cameras suck anyways
Im just mad cause I parted with my K800i lol
F****'n camera!
I was trying almost everything.... It's still not working at all. Camera just stoped working..soft reset..nothing...hard reset...nothing...I did what Fabian is writing in his posts...nothing...one thing has changed, phone found camera and I have icon of camera in Programs menu, but it still don't work. It don't give me any error raports or something, when I tap on the camera icon it's just don't do nothing so....mayby I should go to church and pray for a miracle because I don't have any other options.
Someone knows any program to find problem? To diagnose or something...
I am sure that problem is in software. I didn't drop phone or damaged him...
I have Sandisk mSD, mayby that is the source of the problem?
Hi,
I know it sounds weird, but I got the camera to work for 2 or 3 days by removing the battery for 5 minutes.
I really don't know which is the trigger that makes the camera stop working, but it seems that removing the battery "cleans" or releases something somewhere.
It's really annoying but at least I found a systematic way to make the camera return to life everytime it dies...
Try this... maybe works for you too...
fabian
...zzzzzzzzzzzzzzzz...
Yo Fabian
That thing with taking off battery don't work on my 8525.
I was trying few combinations of that solution (without mSD cart, with cart in the phone). Life is hard. Nothing helps.
I just looking for software that can tell me what is wrong, but i can't find nothing. Something to check my hardware or something...
Mayby you have any idea how to get any info what to f*** is going on?
NeOrB
Hi
I really tried everything I could...
I've been looking for that tool you mention ... no luck..
Could not find a windows mobile event viewer neither...
I'm thinking on messing around with the c# sdk to debug the camera application ...
I can tell you now after a few days that removing the battery does not always work
My advise... if you're one of those lucky guys that can claim for the warranty... go for it and replace this f... phone!
fabian
Hi Fabian!
I don't have warranty for my phone, I bought it on eBay in USA, I had 7 days to turn it back if there were something wrong with that....camera stoped working after 9 days. Worst thing is that now I am in Poland and I even can't find any place where someone could repair that phone for me.
Thanks for wasting your time for me!
I'll not surrender and I will try to find solution!
Someone must know what to f**** is going on!
Few guys telling that problem could be with Sandisk mSD. And that could be true, because I remember that after I bought that card camera stoped working.
When I will have some more time I will hard reset PDA or something with taking off mSD from PDA before doing that. Mayby that is the solution. We will see...
Thanks one more time Fabian
C U at the next post!
NeOrB
i have a few problems with my wing: my touchscreen doesnt work and my wing makes no sounds...can someone help me?
Please be more specific with your description, it is easier for everyone to help. I have a similar issue as well and I posted it in a different section (Herald Mobile 6).
how much more discriptive can i be, the touch screen wont work and it isnt makin any sound!
which rom do you have, what have you done before touch screen doesnt work, can you switch your phone on and so on...
no rom and yea i can turn it on
I will "donate" money to someone, if they can get my camera working?
dB Zac said:
I will "donate" money to someone, if they can get my camera working?
Click to expand...
Click to collapse
TC,
What's wrong with your camera? Is it physically broken? I doubt you'd have to donate just to get help. Just post your problem.
Cheers.
I did post my problem. I got a few people who say they have the same problem but no one has a fix. I just cant get the program to initialize
dB Zac said:
I did post my problem. I got a few people who say they have the same problem but no one has a fix. I just cant get the program to initialize
Click to expand...
Click to collapse
I noticed your using MIRI ROM 6.5 Manila 2.5
Have you tried another ROM?
Or go back to 6.5 2.1 see if camera still has probs
Manila 2.5 does have known bugs and is not perfect yet
Worth atry then you will know if its the camera or ROM
the problem started with duttys wm6.1 rom with manila 2.1, I also tried a few wm 6.5 roms with manila 2.1
Have you tried to flash an Official ROM? Or install a new camera cab?
D'rath
yes I have tried to do both of those. I even tried the stock blackstone camera
dB Zac said:
yes I have tried to do both of those. I even tried the stock blackstone camera
Click to expand...
Click to collapse
You said that the camera gives you an error message that says "Failed to initialize..... etc..."? Did it have anything in there about a certificate error or component missing error?
I know this may be a long shot but have you ever dropped the phone or gotten it wet? If so then you may have jarred something inside the phone or fried an essential circuit for the camera to function.
I would suggest flashing a stock ROM including radio and see if that helps at all.
I have never had a problem with my HD's camera short of it being really laggy under poor lighting conditions. I'll keep a lookout for a fix for this.
dharvey4651 said:
You said that the camera gives you an error message that says "Failed to initialize..... etc..."? Did it have anything in there about a certificate error or component missing error?
I know this may be a long shot but have you ever dropped the phone or gotten it wet? If so then you may have jarred something inside the phone or fried an essential circuit for the camera to function.
I would suggest flashing a stock ROM including radio and see if that helps at all.
I have never had a problem with my HD's camera short of it being really laggy under poor lighting conditions. I'll keep a lookout for a fix for this.
Click to expand...
Click to collapse
I am not the 1st owner but it shows no sign of watter damage. It did get set down next to a tool magnet once. I have never dropped it.
I did take it all the way back to a stock SPL and the newest stock rom, didn't help. I have had to diferent people tell me they have the same issue and once more I found who posted before me about the same issue. He had a fix but it didnt work for me.
Last night I did a full tear down and see no damage to any of the parts but that doesnt say much
dB Zac said:
I am not the 1st owner but it shows no sign of watter damage. It did get set down next to a tool magnet once. I have never dropped it.
I did take it all the way back to a stock SPL and the newest stock rom, didn't help. I have had to diferent people tell me they have the same issue and once more I found who posted before me about the same issue. He had a fix but it didnt work for me.
Last night I did a full tear down and see no damage to any of the parts but that doesnt say much
Click to expand...
Click to collapse
That is really weird... I've personally never had a "Failed to initialize" error before. Usually it is just a certificate error that I get after I screw up a ROM build and it's never related to the camera.
Since you already restored the stock SPL and the whole 9 yards, I strongly suggest contacting HTC's repair department and see if they have any advice or can repair the device for a fee. I have a good friend who dropped his Touch HD in a glass of milk and the phone worked fine afterwards but he was unable to use the actual Touch Screen as the Digitizer was toast. He sent it in to HTC to have it repaired and if I remember correctly, received it back yesterday, like new.
Good luck to you man, hope you can get it figured out or are able to have the device fixed if it turns out to be a physical problem and not software related.
Best of luck,
Dan.
really? even though it is an HD in USA? Did he call the HTC in the US?
Ever since I had this HTC Tattoo, I couldn't manage to calibrate the G-sensor and therefore the display doesn't turn when I rotate the phone.
I always get the message "Calibration aborted".
Do you guys have this problem? Did you find a solution for this?
Please help!
Reset phone
Already did it. Still not working.
Did you fix the problem yet, you could try a different rom or even reflashing the one on the phone already.
same problem here.....
I did try a different ROM, still nothing.
Then it could be a hardware issue. If I were you, I would've looked for a replacement.
have you tried holding the phone at a tilt and then calibrating?
lobotomy said:
have you tried holding the phone at a tilt and then calibrating?
Click to expand...
Click to collapse
Yep, I did try that. Still nothing. I think it's just a hardware problem.
I saw this in the Hero forum and I think it might help. There are 2 ways of checking a hardware fault with the G-sensor:
- either the Bubbles game which does not depend on the OS for sensor data
- or the Sensor Debug app.
If anyone of these apps gives you a good response from the sensor, then it is a software fault and you should harass HTC for a software patch. That's what the Hero guys did and it seems to have worked for them (in that case it seemed to be some kind of permission problem with the calibration log file).
Hey guys,
a friend has a HTC HD2 what has some strange issues.
If you start the phone, everything is fine, you can work with it like it should be.
But after you switch of the display and reactivate it after some time it seems that the digitizer is no more working.
It's just luck if you try it several times and it work again. Most of the time it doesnt.
At first for me it seems to be a software issue.. he was still on Stock ROM WM 6.5 and nothing changes anyway.
So I did all steps to unlock the phone and installed ICS 4.0.4 release. Still same issues here... :-/
After that I gave WP 7 a try, there it seems to be a bit better but still the same trouble.
After turning on the display again the digitizer is no more working. But directly after a reboot it works still fine even with multitouch.
Does anyone had ever heard a a HD2 like this? Is the digitizer just broken or can I repair it in any way? I mean it works great if you don't switch the display off
May you find something useful here http://forum.xda-developers.com/showthread.php?t=1774566