Related
I've tried the "brick fixes" on this forum, but without luck so far... I can get into download mode, and I've tried flashing with odin from this post which says "passed" to me. After this is reboots into a black screen after the "galaxy S" screen, and nothing can be done except making the capasitive buttons light up...
All help is appreciated!!
FYI I don't have a SD card installed during odin...
Solutions in #6 and #7...
Thanks a ton
Novek said:
I've tried the "brick fixes" on this forum, but without luck so far... I can get into download mode, and I've tried flashing with odin from this post which says "passed" to me. After this is reboots into a black screen after the "galaxy S" screen, and nothing can be done except making the capasitive buttons light up...
All help is appreciated!!
FYI I don't have a SD card installed during odin...
Click to expand...
Click to collapse
Sounds like a boot loop, but I can't figure out why you would get one with the stock odin flash. Try doing a factory reset? it shouldn't be needed, but who knows?
how? tried the "hard reset" whitout luck
Novek said:
how? tried the "hard reset" whitout luck
Click to expand...
Click to collapse
In recovery.. there should be a factory reset option. I thought odin did that though.
when it is resetting I can read "mbr checksum error" or similar in yellow text before it's wiping data etc...
Try this ...turn you phone off but keep it plugged into you cpu usb cord and open oidin, next put your phone in download mode and put the needed files in oden and click start I had a hard time getting odin to work right for some reason this may not help but it worked for me. Good luck I don't think you bricked I think you can come out of this.
I assume that you used the partition in ROM Manager? If so I had the same problem as you. The phone would boot up to a black screen with only the buttons working. What I did was flash Eugenes 2.2 Froyo Rom, I surprised that it booted up and worked. After that I flashed back to stock rom and it work as it did before!
AustinKnight45 said:
Try this ...turn you phone off but keep it plugged into you cpu usb cord and open oidin, next put your phone in download mode and put the needed files in oden and click start I had a hard time getting odin to work right for some reason this may not help but it worked for me. Good luck I don't think you bricked I think you can come out of this.
Click to expand...
Click to collapse
Thanks for the help, but my problem occurs after odin... when it's rebooting and it says "passed!" i just end up with a black screen with only the capasitive buttons lighting up when pressed...
ElahC said:
I assume that you used the partition in ROM Manager? If so I had the same problem as you. The phone would boot up to a black screen with only the buttons working. What I did was flash Eugenes 2.2 Froyo Rom, I surprised that it booted up and worked. After that I flashed back to stock rom and it work as it did before!
Click to expand...
Click to collapse
that's my problem!! found it, downloading now... will report back for future accidents...
Froyo worked!! Thanks a ton! Now I just have to downgrade
sry... dubbel
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
farrisizdaman said:
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
Click to expand...
Click to collapse
I turned the phone off while the usb was connected when the phone if off open odin ounce its open boot up the phone and boot it into download mode from there odin will connect and you can put the files you need into it and click start. This worked well for me when I needed to revert back to factory vibrant after flashing the "Real lag FIX" kernel that made my ear piece not work and some of my buttons not work but boy was my phone snappy and my benchmarks were awesome but what good does that do when your girl calls you and you cant hear her and all she can hear is you saying hellllllllooooooo .
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
farrisizdaman said:
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
Click to expand...
Click to collapse
Ya it was like that for me until I did what I said in my last post, you do have the samsung drivers installed ?
Edit: And you are using this method or this thread HERE
farrisizdaman said:
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
Click to expand...
Click to collapse
You have managed to get into download mode right? My device is up and running stock now, but gonna try some other ROM now =)
Glad to hear your phone is back up and running .
i know this is an old thread, but i figure this can help someone later... brick is a common search term, and i figure this will come up in a search and this will save time for others...
here's what happened to me. i was flashing back to stock and was in download mode. the blue bar was moving etc and murphy and his dumb law decided to kill my my usb port... i thought the phone was DEAD! nothing i did woke the phone up. no battery indicator, buttons didn't do anything... it was all black. holding up/down and power didnt turn the phone on and into recovery or download mode... the phone was DEAD...
then after scouring the forum forever, i finally got the phone into download mode...
NOTE: i don't recall if the usb wire was plugged into the computer or not... i think it was though...
NOTE2: samsung drivers should have been installed already...
- remove the battery
- hold vol up and vol down buttons
- reinsert battery
i thought WOO HOO!! I GOT INTO DOWNLOAD MODE!!!
the next issue i had was getting odin to recognize the phone... it didn't detect what com port i had. but after a lot of reading, i finally got it to work...
- open odin first
- then get into download mode using the steps above...
after odin recognized the port the phone was plugged into, i flashed back to stock rom using the instructions given on this site... and my dead phone works again...
i was able to fix a dead phone!! this phone could be un-brickable!!
i hope this helps...
farrisizdaman said:
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
Click to expand...
Click to collapse
Open odin first, then plug in your phone.
So if I have a phone with a dotted line and a computer did I brick my phone?
ODIN crapped out while installed a new kernal and I have a phone with a dotted line and a computer stuck on my screen. Am I bricked?
Regards,
B
vibrantFTW said:
So if I have a phone with a dotted line and a computer did I brick my phone?
ODIN crapped out while installed a new kernal and I have a phone with a dotted line and a computer stuck on my screen. Am I bricked?
Regards,
B
Click to expand...
Click to collapse
no it's not bricked, you need to get to download mode then you can flash again with Odin.
I can't get anything else on the screen. with the usb plugged in or anything... it turns off and then back to the phone .../!\.... computer. Any tips?
Regards,
B
Got it in download mode but still just sits at zImage once I get ODIN started. Does this take like 45+ minutes to put a kernal on? I'm selecting the stock vibrant kernal in the CSC target. Odin doesn't so anything after firmware update starts.
I'm kind of scratching my head on this one....
Regards,
B
I tried to just put the stock rom on it and it is just sitting at cache.rfs with no progress. Not good...
Regards,
B
OMG I finally got it. I had to leave ODIN open after it stuck at file analysis. I then took out the battery of the phone and put it back into download mode. I click start in ODIN and thankfully... she's flashing back to stock 2.1. I had tried a million different ways... ODIN is not exceptionally stable. No bueno. I think I'm going to keep the stock Kernal cause this was scary... lol.
Click to expand...
Click to collapse
I just fixed it a few minutes ago. I'm just quoting myself above.
Regards,
B
I was trying to go back to 2.1 from 2.2 and when Odin failed I pulled the battery and now I'm stuck in Download mode.
Is there a way to get out?
I got to the clockwork screen and tried to reboot but it brought me to a screen with the phone a ! and a pc on it.
Anyone have a clue?
SS
Reboot pc and phone into dl mode and try again untill it works
Sent from my SPH-D700 using XDA App
I should reboot my PC every time?
SS
a solution >> From a relative NOOB
ssiperko said:
I was trying to go back to 2.1 from 2.2 and when Odin failed I pulled the battery and now I'm stuck in Download mode.
Is there a way to get out?
I got to the clockwork screen and tried to reboot but it brought me to a screen with the phone a ! and a pc on it.
Anyone have a clue?
SS
Click to expand...
Click to collapse
I have had this issue since the first use of Odin. I believe my answer is the proper one but am open to correction. You have to go back to download mode and odin yourself to recovery. I have had inconsistent successes with Odin. . .sometimes for no apparent reason the fifth or sixth time works.
Each non-success renders my phone in the state you described unless I go straight into DL mode. I have never rebooted my computer to make this work, or moved my usb, or anything. Just persistence. This is just my personal experience and I am in no way a master of all things android, odin, pits, or anything. Just a tinkerer.
Djinn23 said:
I have had this issue since the first use of Odin. I believe my answer is the proper one but am open to correction. You have to go back to download mode and odin yourself to recovery. I have had inconsistent successes with Odin. . .sometimes for no apparent reason the fifth or sixth time works.
Each non-success renders my phone in the state you described unless I go straight into DL mode. I have never rebooted my computer to make this work, or moved my usb, or anything. Just persistence. This is just my personal experience and I am in no way a master of all things android, odin, pits, or anything. Just a tinkerer.
Click to expand...
Click to collapse
exactly what he said. maybe the file youre using isnt working. mine was stuck last night and i redownloaded the file (idk if it was the same one) but i downloaded a new one, went into recovery and wiped completely, tried it again and it worked.
Help with Odin
Im stuck now in the middle of the download. I know they say restart pc and phone, but is it safe to pull the battery out to turn of. It says on download screen do not turn off target??? Any help would be appreciated. Thanks
Pull the battery and try again.
Sent from Bonsai 6
I am having same issue. I cant try again because it is not in the first stage of dl mode that you see when hit 1 and power. It has the icons of a pc and phone communicating with a yellow exclamation triangle in between
PC does not recognize phone is connected because of the stage of dl mode.
Please if anyone can help - created a new thread here
http://forum.xda-developers.com/showthread.php?p=17102763#post17102763
jmsnyc said:
I am having same issue. I cant try again because it is not in the first stage of dl mode that you see when hit 1 and power. It has the icons of a pc and phone communicating with a yellow exclamation triangle in between
PC does not recognize phone is connected because of the stage of dl mode.
Please if anyone can help - created a new thread here
http://forum.xda-developers.com/showthread.php?p=17102763#post17102763
Click to expand...
Click to collapse
Pull the battery and Odin with it out. Put it in download mode by connecting cable and then holding the 1 key and power button.
Sent from my SPH-D700 using XDA App
Can anyone help me? I think I bricked my phone.
I followed the instructions from http://forum.xda-developers.com/showthread.php?t=861253
The thing is, I didn't have the drivers when I put my phone into download mode and put it into the USB, so i left the phone in dl mode and when I replugged it in, I selected the .tar file for PDA and then clicked start.
However, it said "failed on the first upper left box" and I clicked reset. At this point the screen turned black, and now I can't get it to turn back on.
I was on 2.1 rooted. I took out the battery and put it back in and now there's a picture of a phone and a computer with an exclamation mark in between them.
Twelveoclock said:
Can anyone help me? I think I bricked my phone.
I followed the instructions from http://forum.xda-developers.com/showthread.php?t=861253
The thing is, I didn't have the drivers when I put my phone into download mode and put it into the USB, so i left the phone in dl mode and when I replugged it in, I selected the .tar file for PDA and then clicked start.
However, it said "failed on the first upper left box" and I clicked reset. At this point the screen turned black, and now I can't get it to turn back on.
I was on 2.1 rooted. I took out the battery and put it back in and now there's a picture of a phone and a computer with an exclamation mark in between them.
Click to expand...
Click to collapse
Your phones not bricked, just install the drivers and follow the odin instructions.
richse said:
Your phones not bricked, just install the drivers and follow the odin instructions.
Click to expand...
Click to collapse
odin does not recognize my phone nor will it turn on so what exactly are the steps I should do in order to get the phone turned on so that I can put it into download mode?
pre2epic4g said:
odin does not recognize my phone nor will it turn on so what exactly are the steps I should do in order to get the phone turned on so that I can put it into download mode?
Click to expand...
Click to collapse
Did you install the Samsung Drivers for your computer? If you can't get the drivers to correctly install and recognize your phone, just try a different computer.
Turn off and pull battery, wait a few minutes. Put battery back in and hold down the 1 key and turn on. You should get the boot loader screen.
If you followed the directions, how did you not install the drivers?
also after y install odin and samsung drivers. i had to restart the computer befor they started working right.
Thanks, the battery trick worked. I forgot to install the driver because I have two comps, and the other computer has the drivers, so I didn't bother installing them again.
Yes, I bricked my phone.
I tried all of your advice and nothing worked. The phone wont boot into download mode, boot to clock work mod, let alone even turn on. I bricked my phone after trying to install Viper ROM 3.0.3. I should have just stayed with Epic Experience 2.0.05 as it was good enough.
Thanks everyone for trying to help but if your phone wont turn on no matter what what you read and try here your phone has been bricked.
DangerZone1223 said:
Did you install the Samsung Drivers for your computer? If you can't get the drivers to correctly install and recognize your phone, just try a different computer.
Click to expand...
Click to collapse
yes.
the problem is that the phone would not turn on... meaning you can even put it in download mode. i confirmed that it was bricked and that nothing could be done to revive it.
Hey guys,
I am currently experiencing the same problem as the OP.
I was using my phone today and it froze, so I pulled the battery, tried to turn it back on, and got this phone, computer, exclamation point symbol thing
I can get the phone into recovery, but wiping doesn't work.
I can get the phone into download mode to odin, and the comp recognizes it, but the phone turns off within 30 seconds of being in download mode. Not enough time to finish odin'ing.
Any advice?
andre141 said:
Hey guys,
I am currently experiencing the same problem as the OP.
I was using my phone today and it froze, so I pulled the battery, tried to turn it back on, and got this phone, computer, exclamation point symbol thing
I can get the phone into recovery, but wiping doesn't work.
I can get the phone into download mode to odin, and the comp recognizes it, but the phone turns off within 30 seconds of being in download mode. Not enough time to finish odin'ing.
Any advice?
Click to expand...
Click to collapse
It is supposed to stay on in download mode. Pull the battery, hold the power button for 30 seconds, then plug the phone in and see if it will go into download mode with the battery out. If and when it does, pop the battery in and try to Odin the stock files. You have f.reset unchecked, the DI18 tar in the PDA box and Victory_8G.pit file in the pit section right?
Thank you!
I was using the proper files, but that download mode with the battery out did the trick. It stayed on long enough to odin back to DI18.
Thanks again!
andre141 said:
Thank you!
I was using the proper files, but that download mode with the battery out did the trick. It stayed on long enough to odin back to DI18.
Thanks again!
Click to expand...
Click to collapse
You are very welcome!
Do you BONSAI?
For future reference I can fix hard bricked EPIC phones if you need it. Just PM me with questions if you have any. Hard bricks are only fixable via JTAG.
So Im going to start from the beginning. I have a Verizon Note 3 MJE, rooted with VROOT, cool now Im rooted.
Now i wanted a Custom Rom, So i downloaded Safestrap 3.64 and the Hyperdrive Rom. All good..
Go into the slots of Safestrap recovery create the partition, install HyperDrive and hit Reboot...
Phone reboots but the screen stays blank.. Go do my research and says wait 5-10 minutes after install for w.e reason..
20 minutes go by... go back into safestrap re do process... nothing again.. decided to go back to stock download all Safestraps and one by one start to install and uninstall trying to verify that i have installed the correct Safestrap for installing the Rom... (i know don't tell me Im an idiot but it made sense last night) nothing that i did work... so went back to stock JB 4.3 so now Im rooted as i began...
go into the Safestrap app and uninstall from recovery this one was Safestrap 3.71.. phone is working fine..
So I have no Safestrap im good... set my phone down to clean my car, the phone Wont turn on..
NOOOOOOOO, IDK for the life of me What happened... So i try every button possible, nothing! Recovery Nothing!!!
I plug it to charge it shows the pre charging battery then shuts and repeats...
figured let me try holding Down-Menu-Power while is doing that ... i get into Download mode, Not gonna lie i cried a little lol
Flashed the Stock Firmware 4.3 with the VZW note 3 32g PIT file... finishes ... Resets now Stuck on BOOTLOOP with the Custom Note 3 Splash screen and on top says Entering Recovery but never does... I Have Tried almost everything but hit it with a BAT!!! Can someone please help me...
and YES i took the battery out and put it back in
1. pull sd card
2. hold vol down, home, power to enter "download mode"
3. hit cancel and it should fire up
fletch33 said:
1. pull sd card
2. hold vol down, home, power to enter "download mode"
3. hit cancel and it should fire up
Click to expand...
Click to collapse
The phone will only work if is plugged in to A\C OR computer usb..
I plug it in, the loading battery will pop up, turn off and then repeat.. the whole process takes about 3-4 secs..if unplugged wont do anything at all, when plugged into the computer it lets me access download mode but not recovery..
crunchy_taco said:
The phone will only work if is plugged in to A\C OR computer usb..
I plug it in, the loading battery will pop up, turn off and then repeat.. the whole process takes about 3-4 secs..if unplugged wont do anything at all, when plugged into the computer it lets me access download mode but not recovery..
Click to expand...
Click to collapse
Sent from my SM-N900V using XDA Free mobile app
I would try flashing the stock unrooted mje file by itself.
If you are in same boat then I would flash the pit file by itself. AFTER
All of which is done in odin.
i 2nd that ^^^
mike7728 said:
i 2nd that ^^^
Click to expand...
Click to collapse
Ok I will try that I soon as I get home I will let u guys know how it went
Thanks for all your help guys
crunchy_taco said:
The phone will only work if is plugged in to A\C OR computer usb..
I plug it in, the loading battery will pop up, turn off and then repeat.. the whole process takes about 3-4 secs..if unplugged wont do anything at all, when plugged into the computer it lets me access download mode but not recovery..
Click to expand...
Click to collapse
To be honest...that sounds like a dead battery. You know someone else who has a note 3 you can test by trying their battery?
Sent from my Note 3 via Tapatalk
donc113 said:
To be honest...that sounds like a dead battery. You know someone else who has a note 3 you can test by trying their battery?
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
I tried the battery on another note 3 and vise versa, I got it to go into recovery after flashing stock room at one point and full wiped factory reset it from recovery the fone reset twice and it booted to the welcome screen of picking language but shut off wont turn back on.. so square one again battery bootloop and note 3 bootloop when try to access recovery