Ok, here is the (Cell Tower ID) location based Sleep Management software (earlier called phone switcher).
Saves your battery and works automatically without any manual action once configured
Application is not memory resident so it does not keep running in the background. Does not write anything to registry etc so can be uninstalled cleanly.
Application can run in one of the following modes
• Flight Mode: System automatically switches to flight mode when you are at predefined location (Say Home) based on the time you setup. So when you are at home, say from 10:00 PM to morning 6:00 AM your phone is really sleeping so no one can call your mobile. But if you are not home, then phone remains ON even at night.
• Run Command*: You can configure separate command line applications while ‘entering’ and ‘exiting’ your Sleep Location. So if you want to perform some other actions such as enabling the sounds/vibrations/forwarding etc you need to configure this feature
Run Command* Notes:
• Run command has two settings
o Entering sleep locationo Exiting sleep location.• Either browse for the command line application or copy paste the short cuts on the file and any command line parameters
• Some programs require you to ‘Wake Up’ the device to run, so if needed use that option
• ‘Wait for completion’ is only for advanced configurations. Most of the time it will hang the application. So use if you absolutely need it.
• You can test your run commands from the ‘Test’ menu.
Update history
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
Update 1.0.1
• Multiple locations on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now.
• Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
• If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
It is working on Hermes(WM6), and I have tested it on WM5 emulators. Will NOT work on WM2003.
Setup Instructions:
• You need to be at ‘Sleep Location’ to setup the application.
• In the ‘Locations’ tab, the current location box shows some numbers corresponding to your location.
• Click the button ‘Set as Sleep location’ to add current location as your sleep location. You can add multiple locations as sleep locations.
• On the ‘Schedules’ tab configure the ‘From’ and ‘To’ time fields. (You need to specify time in military time format)
• From the tab ‘Action’ choose if you want to use flight mode or Run Command (you need to set up your enter and exit actions)
• Finally click ‘Enabled’ and click the ‘Save’ menu
That’s all now you are set for ‘Sleep’. You can safely exit rk-Sleep.
The status tab would show you the last action attempt log
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
If you like the application please show your support by replies and or donation on paypal
Download from here
Update 1.0.1
Multiple location on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now. On the sleep location box bring the context menu up, and choose 'Append to location' now add the new location to the list. You can add any number of sleep locations!
Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
Hello,
With this program there would be still another interesting option which one to insert could.
It would thus not have to be possible the flight mode to activate automatically with enters a stored potition dependent on the time.
If someone works in a hospital, he needs to store only the position and every time it is in the hospital the flight mode switched on.
That one could not do also at others locates to use at those handys permitted or desired is I thinks there also of cemeteries.
MfG
S64
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
(I use mortscript to change call profiles, by copying sound files to overwrite the soundfiles I assigned as ringtones for various contacts. So if I set a "work" profile, the ringtones for different people are overwritten with a soundfile that contains silence, while others are made more discrete. It would be great to be able to automate this!)
Jörg
Instead of enabling flight mode, why not just disabling sound or enabling vibrate only mode?
Thanks
V J said:
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
Jörg
Click to expand...
Click to collapse
Jörg,
I do not know about mortscripts, but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
tytnguy said:
... but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
Click to expand...
Click to collapse
Yes, it should be able to do that. Also, maybe it is better to write it this way, and have your "flight mode application" written as a seperate program to be triggered by your tower-based software. In this way, others can contribute to write any other programs (as plugins) to yours. Anyway, AFAIK, Mortscript can do most of the job and or VJ (not the one above) has some nice collection that you can paired with yours.
Next you can write some scheduling software that will run an application whenever there is a 'Busy' (e.g. meeting) in your schedule (e.g. activate vibrate only mode). Then, with your tower-based software and your scheduling software, you can have a nested tower-schedule, while others can have a bluetooth-pairing based (e.g. execute software when near a paired bt device - change mode when inside your car), then you can stack all these together that will schedule your stuff based on tower-schedule-bt pairing.. WOW... too much software engineering makes you crazy.
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
drivex said:
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
Click to expand...
Click to collapse
Yes I know that is where this software will lead to(Hopefully)
But to support multiple locations the progrma gets too complex. But I know that will be a perfect applicaton!
@VJ: I think using mortscript with the tool would defeat the purpose of the tool, because with mortscript you don't need the tool (The current tower, or BTS as I should refer to it to, is available in registry I think)
@tytnguy: kudos to you, great streak with so many useful programs.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
• You can configure separate command line application while ‘entering’ and ‘exiting’ your Sleep Location
More info on the main thread.
Hi,
Great Application that seems to work perfectly. I can see myself using it to help save on battery life.. and also when I enter work where I cant have the phone on.
Don't suppose you'd share how you get the tower information? I tried a method posted on the forums but it doesn't work for me and only works when the data/voice is not connected.
I tried to implement this into an application I use as a backup to give a rough location if GPS location isnt available but never managed to read a sensible string for the towers ID.
(If you'd rather not say I understand fully)
Thanks,
sam
Great!, make a profile changer based on location also, that will be awesome
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
ArcticCat said:
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
Click to expand...
Click to collapse
Thanks for the reply,
But right now the application just supports one location, So you are not able to do multiple locations. If you use the slot of managing only alarms its fine. But if you want to do alarm and also in some other location some other action you can not.
But i have that featrue in my list though
To do it, right now you have to set to 'Run Mode' and in the run mode specify any media file, On entering your location the media will be played.
Hi tytnguy,
found a "mini minor" bug in latest version 1.0.3...
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Next step in version profiles would be great
Best regards,
Olioaglio
Olioaglio said:
Hi tytnguy,
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Olioaglio
Click to expand...
Click to collapse
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
Olioaglio said:
Next step in version profiles would be great
Olioaglio
Click to expand...
Click to collapse
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
tytnguy said:
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
Click to expand...
Click to collapse
I would like location based profiles with different schedule times,
so that you could e.g. install a "Home location" with flightmode from
11pm to 8am (like it is now) and a second profile maybe for work
with flightmode from 12am to 1pm. Or maybe a profile with 24/7 flightmode
on a certain location. Lets say you work in a hospital and while you
enter the lcation phone would turn to flightmode. If you leave phone would
switch on again.
The wifi+bluetooth+beam etc options would be also a geat thing to include
as an option with checkboxes, so one could save even more battery at night
and in sleep location would not be any electro smog.
But for now I can live very good with the program as the main function
works like it should now. One little thing: Found out, that if you reset the
phone within schedule time and phone was turned on (manually) rk-sleep
wont turn it off again. But this may be wanted as not to nag you if you
decide to manually turn on.
Olioaglio
What is the Net Compact framework that it needs! I'm running WM5, and it doesn't work on my device and I supose it has got something to do with what I mencioned earlier. Thanks.
Hi
I did notice that sometimes, the POWER settings on my HD change by thenselves.
The backlight time values for 'on battery' and 'on external power' are increased drmaticaly. The The Backlight level values are decreased to their minimum values (although I use the 'auto adjust backlight').
I suspect that one of the programs I'm using causes all that.
I had installed amongst others the following programs:
S2U2
WkTASK
Please advice
I got similiar problem, these options are checked, but somehow, it will become unchecked.
I don't have S2U2 installed, I guess it is by other means......
Anyone can advice on this?
Some Navigation Applications alter these settings, cuz you need the device to be always ON while using navigation!
But I guess the real cause is that from the Navigation application itsself and/or Exiting the application in a wrong way i.e.: Terminate it, not using the EXIT Menu.
Give it a try, and let us know
Willy
Hello,
I am looking for an app to toggle my gps on/off. Can anyone help me with this?
I have the issue that when I have my phone in flight modus and am out of the country both GSM and GPS are disabled. I would like the GSM to be disabled in favor of GPS to be enabled. I wan't this option for my Tom Tom navigation when out of the country,so it does not get interrupted by phone calls or smsses.
Kind regards
http://www.freewarepocketpc.net/ppc-download-gps-toggle.html
Im also looking for a simple on/off toggle button for the gps.
Since you can have that in android i figure it should exist something similar created for wm.
I have only found wm homescreen plugins so far but since thats no use when you running manila or CHT it not even worth downloading.
Looks like ill have to keep searching....
p00ltergeist said:
Im also looking for a simple on/off toggle button for the gps.
Since you can have that in android i figure it should exist something similar created for wm.
I have only found wm homescreen plugins so far but since thats no use when you running manila or CHT it not even worth downloading.
Click to expand...
Click to collapse
You're right.
I'll test it under pure WM and check the registry while toggling on opr off : maybe I'll be able to detect what keys to change to get the same results directly, and possibly make a CHT widget.
Edit :
Found this one here :
http://wiki.modaco.com/index.php/Samsung_i600
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\GPS Intermediate Driver]
"IsEnabled"=DWORD:00000001
-> change to 0 to toggle off ?
I'll check if it works... And if it actually saves battery life.
A Possible Work Around
I could not get the app from the link above to work on my HD2. It said it installed successfully, but I could find no exe or shortcut for it anywhere on my HD2. I searched a couple of app forums here and found nothing else.
Here is a possible solution although it is not a one-click solution like most toggles. It is based on this post:
http://forum.xda-developers.com/showthread.php?t=645916
Using a text editor, paste this into a new file:
30#ctlpnl.exe AGPSSettingsCPL.cpl - location services settings
Save the file with the name such as GPS Toggle.lnk (that's a small "L" in lnk).
Copy the shortcut file to the Windows/Start Menu/Programs folder. From there you can access it using the Start button/menu. Also, depending on the UI, you may be able to create a button on your main screen. I have Co0kie's Home Tab which provides the ability to create buttons on the home screen. (Co0kie's Home Tab has a number of toggle switches, but not one for GPS.)
This shortcut will bring up the Location screen from Settings. This may or may not be what you want. To be honest, I could not find a place that says "turn on/off GPS."
AGPS only allows to use available data network to update the satellites positions database in order to speed up satellites location.
It should have nothing to do with having the GPS receiver actually turned on or off...
In fact, it's turned off on my HD2, and I'm still able to use the GPS.
I'm currently trying to evaluate the effect the above registry value change has on battery lifetime...
Edit :
OK, at least your post put me on a track :
The registry tweak actually switches on or off the "Automatic GPS management" checkbox in the "Access" panel from the "External GPS" applet in WM "System" settings.
You can still use a shortcut as the one you posted, but it should contain 25#ctlpnl.exe cplmain.cpl,25,2 instead (GPS settings - Access).
Now the registry trick has strictly the same effect, and can be made out of a simple MortScript - then a CHT switch, too.
The only problem is I couldn't notice a better battery consumption, actually...
Hi there,
I Have made a small gps logger application for android, hope you like it.
Features:-
Get Latitude, longitude and altitude.
Change there format to Degree, Minutes, or Seconds.
Stop and Start GPS Service.
Add the location with date and name to a list.
Save the list to user defined file.
see the current location in map in both satellite view and map view.
ability to hide any of the parameters.
Get distance between two location form the list.
I have made it for my own use during ecological survey, but hope you might find it useful, so please if possible tell me what else should i add to it.
And yes the back key wont exit the application, implemented it so that accidentally we I don't exit it, Exit the application through exit option in menu.
Download it from my website:-
ww.planetngp.com/p/download.html
Click the GeoInfo Link.
Thanks for sharing. I was wondering if there was a way to log the accuracy of the GPS?
What I mean is that although I don't have any use for such an app I am always wondering how well a new Rom/Modem performs. I normally just use GPS test in the car and look at it while I am driving (still safely ).
If this feature is already in there just ignore my comment (and thank you for the app).
K.