Database Users

problem S2U2 on X1.

has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
S2U2 screen sometimes display abnormal
Please?

randy_c said:
has anyone experience any problem when using S2U2 on X1? I can press panel key or Ok key then it will take me to the panel/today screen without slide to unlock.
Click to expand...
Click to collapse
Same here. The Panelbutton as well as the Camera button still work in S2U2 lock mode. It doesn't concern me much, because it's essential that noone gets a phone call or music starts to play while the phone is in my pocket. If the panel-button is accidentally pressed nothing bad happens.
S2U2 screen sometimes display abnormal
Please?
Click to expand...
Click to collapse
This sometimes occured when I set the "Display Mode" to DirectDraw. Now I use RawBuffer and haven't had this problem for 3 weeks now.
Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?

Let me ask you a question:
When in landscape-mode and the phone is locked with S2U2 the button to slide reacts very slow. In portrait-mode the button follows the finger very quickly. Is it the same with your phone?[/QUOTE]
I have the same problem. Maybe it's the X1

Thanks, so then I'm calmed First I thought it could be an issue of the picture I use but after a few different ones it was still the same. So it's not just my phone

that's interesting, with the exception of the landscape problem I wasn't aware of the x-panel and camera button issues. This is more likely going to be a fix / update needed for S2U2...

I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.

F-Styla said:
I have got the same problem.
S2U2 doesn't work correctly in landscape mode on my Xperia. The sliding thing and the whole program become very slow.
This problem doesn't seem to be solved yet.
I am wondering if its a Xperia only problem, otherwise in should have been fixed till now.
Click to expand...
Click to collapse
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.

It is partly a xperia specific problem. The panel button is controlled at a very low level in the phone. The panel button action is located in the registry, but that action is called from a low level. The button isn`t recorded by most programs.
A_C knows of this issue.
btw, you can disable landscape for s2u2. So it`s in portrait allways.

dekeijzer said:
btw, you can disable landscape for s2u2. So it`s in portrait allways.
Click to expand...
Click to collapse
Yeah, that's right. But then sometimes the screen messes up completely when I slide out the keyboard and the phone wants to change the screen mode. Also, I have problems with the dialer and S2U2. Sometimes the dialer screen stays on top but S2U2 locks the screen. There is no way to unlock the screen anymore because S2U2 is not on top but the dialer screen cannot be closed.

If this problem is Xperia specific, I will disable S2U2 in landscape mode. I always hoped they will bring a update which solves this problem.
The Xperia always seems to be very slow in landscape mode no matter if I'm using the SE panel, the messaging application or touchflo3D. Very strange behaviour considering the display resolution stays the same.
Click to expand...
Click to collapse
Yes i realized the same. I thought this would be a problem of Windows Mobile and not of the Xperia. If it is a Xperia problem, this is a big minus point for the phone.

It's a nice unlock system, but I have found that when I use this programme the battery loses power quickly.

was using ver 1.44 very stable for a long time
until i installed panel manager from r3a... same issues with panel button unlocking and ok button unlocking
upgraded to 1.62 and problems got worse...
downgraded to 1.52 and switched back to panel manager r2a for the time being.. which is ok.. b/c i rarely used the growing panel and the new cnn panel sucked anyway..
would love to have all the features of s2u2 1.62 but alas xperia doesn't quite seem to work that well with it
currently i have s2u2 set to ignore screen rotation and not unlock with keyboard slide out
my only real grief at this point is that it won't let me use slied to answer or just the regular answer keys with caller id turned on ... i have to turn it off and use the SE answer key completely unlocks my phone to display that message too so agravating...
A_c makes a kick ass program none-the-less ... !!!

same problem here. Also with last version no lock for panel button and camera button...

Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
I still use the system lock with password if I need to "security lock it" (using a today shortcut that immediately invokes it, with password)
Must say I suffered some probs with v1.4 and v1.5 (caller ID & power drain)
But am using 1.62 without problems -it doesn't freeze on caller ID (I have it on window rather than full screen) and the battery drain has gone completely (uses <10% overnight for example, with G-alarm and data / active sync both running all night)
I found that it really was critical to uninstall, delete the S2U2 folder in program files, and delete the whole S2U2 tree in the registry ...and then soft reset -before installing the new version
I'm a huge fan of S2U2 ...its just awesome -without a doubt THE must-have app IMHO and always the first thing I install after a hard reset

I use S2U2 and have just upgraded to 1.62. Seems to be working ok so far, although no-one's called me since I upgraded so not sure of freeze problem :-(
(note to self: Get out more, make some friends ;-)
I find landscape doesn't work well at all with S2U2, but then I also find that with PointUI Home2, so maybe it's an X1 thing with particular software...?

The battery drain issue does seem to be resolved in 1.62.
I too am having problems with screen freezing when a call is received - the slider doesn't answer and since I had the buttons disabled there was no way to answer the call.
I'm still experimenting with other settings but I don't get many calls so it is a long process.
Still, a superb program and essential for me because of the problems with a magnetic case which causes calls to be answered just by removing the phone from the case.

jcsxda said:
Camera and Panel button are known issues ...but not a problem for me either -as I do not see S2U2 as a "security focused lock" ...instead I see it as a "prevent accidental calls etc" type of lock
Click to expand...
Click to collapse
Which means it can't even do accidental call prevention properly, as I found today. It's still quite easy to press the Panel button then the Call button in succession, as they are next to each other, especially if the phone's in a case. Result - pocket dialling, defeating the whole object of program. Shame really, as I've found S2U2 ideal on other phones.

Yep landscape is very slow ..... when i put ignore screen rotation on sometimes when open the keyboard screen goes all fuzzy... bitof a problem. But its a great program...sure it just needs some tweaks n bugfixxes for the X1

sweeet on v2.02 im no longer getting these landscape issues

My Touch HD is getting a little temperamental- lil help

Hi so this is what frequently happens, I lose the top bar on the screen (start icons etc) which needs a restart to get back, sometimes the screen will not go black when the power putton is pressed(for locking), holding the end call button to lock the phone dosent work at all even after restart(not that i use it), also the email icons where you flick down and up to get a preview often dosent work and the email opens instead(happend from the start).
So what i would like to know is what can i do about this I assume there is a new rom out there that is really nice and stable but which do you suggest? I would like one which replaces the alarm setting in the default rom as that is so annoying. Also I use the youtube program all the time and I would like to still have the zoom bar in opera. your advice is really appreciated.

Im getting some of these problems, sorry dont know what to sugest! but my end key has never locked my phone it ends data conection ok !!??
Paul.

Have you tried a hard reset?
There are many great roms each Rom has a thread you can check them out to see what they have and what they can do it depends on your preferences not others

quick snap program for camera?

i was thinking, say i see something interesting, by the time i start camera etc etc it will be gone..
is there or can someone do a quick snap program?
a click will
go to camera
focus and snap
based on pre determined settings
that will be good

Not that I've found - the camera app is what it is, and you can't get past the cutesy animated GUI.
With HD Tweak you can assign "camera" to one of the TF3D home screen soft buttons, which will launch direct into the "take picture" screen, saving you a flip and a press, but you still have to hit the shutter button.

hope someone does it

Try MortScripts. I have no personal experience though..

how can mortscript help for this?

I thought may be possible to reduce clicks required by using automation. May be wrong though
Any way camera start up time is still long even with the Rhodium ported camera app on cooked ROMs (slightly better though).

Use Dutty's rom, it has the Diamond 2 camera app in it.
The screen doesn not lag, and it is very fast!

am hoping for a see it snap it kind of program... is there no way to interface with the cam directly? any developers here pls

hmm no one knows?

S2U2 problems on Omnia 2, Not everything works properly

Hi there! I have a problem with S2U2 on my I8000 Omnia 2. I installed it, and tried it. It's a cool program, but the call screen is not working to me.
----------
I also have new problems with S2U2. smile.gif I don't care about the sliders anymore, I was turned all off. But when my phone rings, and I press the answer button, the phones keep ringing and not do anything. I can't accept calls with S2U2. Is this a known issue or someone have an idea how to fix this? Or I should use an other app like S2U2?
----------------------
This messages copying modoco.

Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)

S2U2 was a real pain in the ^ss up until v2.30.
I haven't had any locking issues with the new version, but some serious battery drain have been spotted. I don't mind, since I have chargers at the car, the office and any other place I need it.
It takes like 13% percent of battery overnight when the phone sleeps.
Without S2U2 I can navigate with GPS for an hour for around 10%.

i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance

Fire1986 said:
Try the latest S2U2 Release v2.30, works like a charm on my Omnia2.
Make sure to select RawBuffer as Graphics Mode. (Setting is located at Advanced S2U2 Settings page)
Click to expand...
Click to collapse
I am using WM6.1 and problem with s2u2 (LATEST) is that while it locks the screen nicely, it leaves the ans/end hard key exposed. This creates problem when I accidentally press them while taking phone out of the pouch. For that I had to have other arrengements as mentioned in this forum. If you had no such issues, then your OS must be of a different version. I hate machine specific softwares.

Not true
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.

I am facing a different problem with S2U2..
When I am listening to music through Touch Player, the song gets paused as soon as S2U2 activates, then I have to press the lock key and then the song plays again
When S2U2 is not running it plays the song flawless..
Any settings I need to change..?

Khisha said:
Out of all HTC snobs here at XDA, A_C is the one who really cares. V2.22 was blazinly fast updated to V2.24 because of dimming issue on ... thats correct - Samsung Omnia II devices. So talking about device-specific software about S2U2 is so wrong and unfair.
Click to expand...
Click to collapse
But at the end of the day, it is not locking the ans/end lock keys which is a problem
Ps: I hv never owned an HTC

No need to use S2U2 now, I am using TouchLockPro, much much better, no more secondary gesture when power on, also the app is fully utilizing the G-sensor and the light sensor.

mokkimhong said:
i am facing one serious problem when using S2U2.
original Samsung Omnia2 alarm does not work properly under S2U2.
sometime alarm ring properly. but sometime, only a very short "beep" then it stopped.
this happened especially during alarm in Snooze.
anyone know how to tackle this problem?
thank you in advance
Click to expand...
Click to collapse
I had the same problem that was very annoying and some of the above too...The main reason I wanted s2u2 was because I didn't want the hardware key button answer call to be enable.Sometimes I was answering calls without knowing it because it was in my bag and with all the stuff in it the button was pushed by itself...From what i see samsung herself has slides for accept or end calls, why the hardware key buttons have to work too?Do you know any trick to disable them when the phone is locked...
Thanks i n advance!

I have the same problem with my Omnia.
Using latest S2U2 (2.43) and setting an alarm with the standard Samsung app.
I have tried most probably all combinations of s2u2 and alarm settings, without any luck.
Anyone ever found a solution for this ?

call button for camera

I didn't find anywhere in this forum, but if someone has found it before I apologize.
I normally assign longpress-call button to camera, just because I prefer to take photos with my hd2 on every occasion. Today I recognized that, after opening camera application by longpressing the call button, you can make a shot when you "longpress" call button again.
Normally touching the screen is ok for me, but it can help when taking self-pictures. It is not so easy to find exact touch point when the screen is on the opposite side.
One can prefer other applications but this is easier for me.

wow, i'll have to try it because that sounds very useful and i have never seen this tip on this forum, and i read about 10 newest/updated threads here every night! closest thing so far was scilor's leo camera keys app (see point 2 below).
i am currently using android 24/7 so not sure WHEN i'll be able to try this tip, but i'm sure other readers will report back their findings.
i would like to add a few more notes on your finding just to add more information to the thread:
1. by default, long press send is mapped to speaker-phone mode. so you can long press send when the phone rings to answer the call directly in speaker-phone mode. you can also long press send during an active phone call to switch back and forth between speaker-phone. so speaker phone toggle functionality cannot work if long press send is mapped to camera.
2. scilor's leo camera keys application is also worth checking out because it allows mapping the snap picture action to the volume up/down keys.
so point 2 is the only alternative for those users that want to keep long press send as the speaker phone toggle, while the OP's suggestion does not need any apps to be installed, but will kill the speaker phone toggle shortcut.

yes, great find..good job

I am currently using Autoloudspeaker 1.5 from Zevele. It is very usefull while driving etc.
I tried scilor's app before but It caused some problems (because other applications or my rom which I have used at that time.)
ASCIIker said:
wow, i'll have to try it because that sounds very useful and i have never seen this tip on this forum, and i read about 10 newest/updated threads here every night! closest thing so far was scilor's leo camera keys app (see point 2 below).
i am currently using android 24/7 so not sure WHEN i'll be able to try this tip, but i'm sure other readers will report back their findings.
i would like to add a few more notes on your finding just to add more information to the thread:
1. by default, long press send is mapped to speaker-phone mode. so you can long press send when the phone rings to answer the call directly in speaker-phone mode. you can also long press send during an active phone call to switch back and forth between speaker-phone. so speaker phone toggle functionality cannot work if long press send is mapped to camera.
2. scilor's leo camera keys application is also worth checking out because it allows mapping the snap picture action to the volume up/down keys.
so point 2 is the only alternative for those users that want to keep long press send as the speaker phone toggle, while the OP's suggestion does not need any apps to be installed, but will kill the speaker phone toggle shortcut.
Click to expand...
Click to collapse

long press call does nothing for me, (cooked rom, 2.13 base)
what rom you using, and what version camera you using? ( cam tab, albums menu about)

Good One
Lovely !!!!
Simply too good
Thanks so much for this tip

samsamuel said:
long press call does nothing for me, (cooked rom, 2.13 base)
what rom you using, and what version camera you using? ( cam tab, albums menu about)
Click to expand...
Click to collapse
I am using dutty's rom v6 and albums ver 3.2 2017.1632 where camera version is 6.26 build 2012.1425.

thanks
.....