Database Users

[Q] sprint galaxy s tablet

hello everyone.... fairly new too here but i have post before back in my mugal days..
Ok im having a big problem with my tablet, after a factory wipe (reset), and after boot up i get the introductory screen but the keyboard wont pop up. I then i figure let me just skip this part.
Get to what supposed to be the home screen but i get nothing just a black screen, but i am able too see notification bar with time and battery status but below is just black. I try and wipe again (holding volume down and power button) thinking maybe something didnt install correctly, and sure enought still the same problem. vibrate once followed by two consecutive vibrates (error setup wizard failed start force close)
called sprint they couldn't help me. Now my question is do anyone have the stock sprint firmware in the form of a update.zip so i can put on sdcard and flash to see if that fixes problem or do i just have a brick?

1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem

acolwill said:
1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem
Click to expand...
Click to collapse
Sorry if i posted this in the wrong spot. ANY MODS CAN YOU MOVE THIS TO CORRECT FORUM.
Even tho i did read up on Roto JME v4 it say if for GSM version. I have sprint (CDMA) version.

where can i get the drivers when you put tab in download mode?

Review #1 above, search for it. Don't get others to do your work.

rangercaptain said:
Review #1 above, search for it. Don't get others to do your work.
Click to expand...
Click to collapse
I didn't ask anyone to do anything for me, even thought i found it my self anyways thanks for those who helped.

Installed English Villain ROM onto at&t Galaxy S II

Hey, so I recently got my Samsung Galaxy S II from at&t and I rooted it. I was trying to flash the villainrom onto it but I guess I flashed the english(not sure what to call it) version of it. Now my phones voice drivers wont work and my back button doesn't work. I tried to go into recovery mode and it lets me but I cant select anything because when I hit the home button to select something it just takes me back to the top of the list. I just want to get my phone back to stock. Can anyone help me please? I'm really very sorry if this is in the wrong place. Please, any insight on this matter would be greatly appreciated. Thank you.

use the power button to select in recovery...if you have a power button ?
Sent from my GT-I9100 using Tapatalk

The power button just gets rid of all options and sits at the hat thats in the background. Is there anyway to restore to stock with my computer or odin or something? Thanks for the reply! Does anyone know if I can use the android SDK to access my phone?

cant you Odin flash a stock rom (at&t ofc) from samfirmware? this sure unroots your phone but also send it back to the original conditions.
After that, just root again.

That worked like a charm! Thank you! I didn't realize that I could flash it from Odin. Was tough finding the file that works with the at&t phone though. Here is the link to the post I found in case anyone else needs to do this. This is exactly what happened to me. http://forum.xda-developers.com/showthread.php?p=18262016

[Q] Totally Lost - Samung Galaxy S i9000

Hi Guys,
So I've a Samsung Galaxy S i9000. Before I begin, can I just say I am totally and utterly technically un-savvy.
My friend rooted my phone so I could unlock it to use a particular sim card. However, my phone is now faulty and
I want to bring it back under warranty for repair/possible replacement.
I have this app called "Superuser" and I just cant get rid of it. I have tried a ridiculous amount of different YouTube
videos/blog instructions on how to un-root and delete the Superuser. None of them have worked in regards to removing
the app. I think I have un-rooted it but I don't know. Please please please can somebody help me! I've no idea what to do
and I don't understand 90% of the technical jargon in some of the instructions.
I tried restored it manually on my phone and via Kies but my phone was just totally restored the exact same way as it was
before (all photos,apps,contacts etc.). I've NO problem losing everything on my phone I don't care. The latest thing I tried was
an app where I typed in a code that apparently deletes the Superuser app but that kept saying it wouldn't work because it was a read
only file.
Here are my phones details:
Firmware: 2.3.3
Baseband: I9000XXJVO
Build Number: GINGERBREAD.XWJVH
Any help is very much appreciated. Thanks

Make note of the modem firmware by going to settings>about>baseband version
1. Go to samfirmware.com
2. Go to flash tools > I9000 and download it. Extract to desktop.
3. Download stock ROM. firmware> I9000 and then choose the one one that matches the baseband for your area. Like in Canada my baseband is I9000KG3. So that's the ROM I download.
4. Turn off your phone and put it in download mode by pressing volume down + power + home
5. Open Odin from your desktop and plug in your phone.
6. A yellow bar should highlight a com port. This means your phone is recognized, the number doesn't matter.
7. Tick repartition and load 512 put that came with the flash tool, and load your firmware into the PDA section.
8. Start Odin and let it do its magic.
9. When it is done, it might boot loop. Even if it doesn't, reboot into recovery (power off, then power home vol up) and wipe data factory reset.
10. Your phone is 10053-47338282747728728% stock.
11. Hit thanks
Sent from my GT-I9000 using xda premium

Deleting SuperUser will not unroot your phone, check on sammobile.com or checkfus the latest firmware for your country and flash with Odin.
You can find good guides on youtube about how to use it.

Wouldn't it be easier just to run it in recovery and flash unroot.zip file.
I always root my I9001 like this so it should also work in opposite way.
Typed with my I9001

It will leave traces. Best bet is to not.
Sent from my GT-I9000 using xda premium

[Q] No sound + cant make calls after flashing new ROM

I've looked at a bunch of other posts, been searching for a week for a solution to this but cant find anything.
I flashed the latest FoxHound ROM which is a KitKat rom.
I flashed it using the dev's instructions and after flashing, I had the wifi bug issue which I fixed. But the next issue was that I couldnt make or receive calls.
After this I tried flashing a couple of other roms and had exactly the same issue
The last Rom ive loaded is CyanogenMod 11-20140104-SNAPSHOT-M2-jfltexx
I've got the i9505
Says 4.4.2
SE Linux is enforcing (this used to be permissive - is that a problem? )
Baseband
i9505XXUFNA5
When I boot into download mode there is no Knox entry - i cant currently see the status although I'm guessing it's been tripped due to this flash which is fine, I just want to fix this issue and get it functioning correctly
Any help would be much appreciated.
Cheers
Edit:
Whenever I go into Apollo (music app), DSP manager FC's - says DSP manager has stopped working etc etc
When I try to make a call the screen goes blank, takes ages to respond, the phone at the other end is ringing but after they answer, nothing is heard.

FelixCited said:
I've looked at a bunch of other posts, been searching for a week for a solution to this but cant find anything.
I flashed the latest FoxHound ROM which is a KitKat rom.
I flashed it using the dev's instructions and after flashing, I had the wifi bug issue which I fixed. But the next issue was that I couldnt make or receive calls.
After this I tried flashing a couple of other roms and had exactly the same issue
The last Rom ive loaded is CyanogenMod 11-20140104-SNAPSHOT-M2-jfltexx
I've got the i9505
Says 4.4.2
SE Linux is enforcing (this used to be permissive - is that a problem? )
Baseband
i9505XXUFNA5
When I boot into download mode there is no Knox entry - i cant currently see the status although I'm guessing it's been tripped due to this flash which is fine, I just want to fix this issue and get it functioning correctly
Any help would be much appreciated.
Cheers
Edit:
Whenever I go into Apollo (music app), DSP manager FC's - says DSP manager has stopped working etc etc
When I try to make a call the screen goes blank, takes ages to respond, the phone at the other end is ringing but after they answer, nothing is heard.
Click to expand...
Click to collapse
Few weeks ago I faced the same problem but with arrow or omega rom I dun remember exactly. But it had Viper installed some kind of sound enhancing app. I deleted that n voila my phone's sound is back to normal
Sent from my GT-I9500 using XDA Premium 4 mobile app

simon7997 said:
Few weeks ago I faced the same problem but with arrow or omega rom I dun remember exactly. But it had Viper installed some kind of sound enhancing app. I deleted that n voila my phone's sound is back to normal
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you give a few more details - how did you delete that? from within the rom?
- ie: boot up, start ES file manager, find it, delete?
Thanks

FelixCited said:
Can you give a few more details - how did you delete that? from within the rom?
- ie: boot up, start ES file manager, find it, delete?
Thanks
Click to expand...
Click to collapse
Download and extract this file https://mega.co.nz/#!PIZinRQJ!EauDOl3DUDAYG81a636yWl94otIhzi8iUgcBk-LknZs and flash that .tar via odin by selecting phone/cp . Make sure to turn off your phone mate .
Sent from Hell ?

Repulsa said:
Download and extract this file https://mega.co.nz/#!PIZinRQJ!EauDOl3DUDAYG81a636yWl94otIhzi8iUgcBk-LknZs and flash that .tar via odin by selecting phone/cp . Make sure to turn off your phone mate .
Sent from Hell ?
Click to expand...
Click to collapse
Flashed with Odin under 'Phone'. Didn't do anything - same issues.

FelixCited said:
Flashed with Odin under 'Phone'. Didn't do anything - same issues.
Click to expand...
Click to collapse
I actually never use Foxhound and im not sure if hes rom is base on Leak kitkat or something. But if you dont have an Entry of Knox Warranty Void then try this , extract and flash the .tar

Repulsa said:
I actually never use Foxhound and im not sure if hes rom is base on Leak kitkat or something. But if you dont have an Entry of Knox Warranty Void then try this , extract and flash the .tar
Click to expand...
Click to collapse
Flashed Wanam plus that last modem file you gave me and it's fixed, I can make calls. Im stoked. But now I cant turn wifi on and i cant remember which file to flash to fix that!
So now my baseband is I9505XXUEMJ5
Build is WanamLite - XXUFNA5
SE Linux = Permissive
Thanks for the help, really appreciate it. I would've been searching for hours otherwise :good:

FelixCited said:
Can you give a few more details - how did you delete that? from within the rom?
- ie: boot up, start ES file manager, find it, delete?
Thanks
Click to expand...
Click to collapse
U could hv simply done that from application manager
Sent from my GT-I9500 using XDA Premium 4 mobile app

Im having the same problem, no sound or cant make calls
Ive been trying to fix for ages now, heres whats on my device,any help appreciated, thanks in advance
AP: i9505xxuame2
CP: i9505xxuame2
CSC: i9505h3gamd8

kevstacey said:
Im having the same problem, no sound or cant make calls
Ive been trying to fix for ages now, heres whats on my device,any help appreciated, thanks in advance
AP: i9505xxuame2
CP: i9505xxuame2
CSC: i9505h3gamd8
Click to expand...
Click to collapse
I actually fixed my problem for a while, cant remember exactly how, then flashed a different ROM thinking I was oK and BAM, no sound again, cant make calls, listen to music nor play videos/youtube etc..
Very frustrating.

Working again now
i installed I9505XXUEMK9_I9505H3GEMJ2_H3G.zip from sammobile .com
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes

FelixCited said:
I actually fixed my problem for a while, cant remember exactly how, then flashed a different ROM thinking I was oK and BAM, no sound again, cant make calls, listen to music nor play videos/youtube etc..
Very frustrating.
Click to expand...
Click to collapse
And to add to this, I dont even KNOW if ive got the old BL or new... because in download mode there is nothing that says KNOX, it just says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
I dont know if this info helps... ive never taken this long to solve an issue with one of my devices, this truly is frustrating so if anyone can help....thatd be BONZAAAAAAAAAA

kevstacey said:
Working again now
i installed I9505XXUEMK9_I9505H3GEMJ2_H3G.zip from sammobile .com
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
Oh no kidding... you fixed it?? thats cool, what ROM is that I9505XXUEMK9_I9505H3GEMJ2_H3G ??
Like what region? and do you have a knox status?
Nice work mate

The firmware is for 3 network uk but im guessing if everyone searches the most relevant device to them and update to new firmware it should solve the problem
---------- Post added at 03:22 PM ---------- Previous post was at 03:14 PM ----------
And my Knox status is knox warranty void 0x1 but everything works better than ever

[ROM][OFFICIAL][ANDROID UPDATE] N8000XXUDOF1 KitKat (4.4.2) (10.06.2015)

Hey guys! I'm new here and I'd like to share with you the latest and probably the last official update N8000 will ever get (sad, I know - let's pour out the feelings of our souls together through Evanescence's Going Under [youtu.be/CdhqVtpR2ts]). It's the latest KitKat containing bug fixes and minor updates for N8000XXUDNE4. It was released in the middle of this year HOWEVER I'd like to ask you a favor in exchange. I can't download it here due to where it's been uploaded and my region's connection (more Evanescence!). Would you please upload a mirror on Mega for me? That'd be really nice and a great way to say thanks for this rom.
samsung-updates.com/device/?id=GT-N8000
RapidGator (ITV):
rapidgator.net/file/3761d8b5f447b080a67c22c51aecfbae
AlfaFile (O2U):
alfafile.net/file/Svi
Thank you guys and I'm enjoying XDA a lot!
Edit: This link should work just fine! No more tears: 1fichier.com/?pzbsily62n
Also, don't forget to use Odin in order to install the rom.
Update (Tutorial and additional info):
Device Name: Galaxy Note 10.1
Model number: GT-N8000
Android Version: 4.4.2
Baseband Version: N8000XXUDNH1
Kernel Version: 3.0.31-4798185
Build Number: KOT49H.N8000XXUDOF1
AP: N8000XXUDOF1
CP: N8000XXUDNH1
CSC: N8000ITVDOF1
Odin downloader – Odin3_v3.09 (datafile.com/d/TmpReE1EazFOQT0F9/Odin_Multi_Flasher_v3.09.zip)
USB Driver (androidromupdate.com/samsung-android-phones-usb-driver/)
1) Extract the downloaded N8000XXUDOF1 firmware or stock ROM. Use winzip, 7zip,winrar or any decompressing program you have in your computer.
2) Run Odin3_v3.09 flasher program.
3) Just click on the PDA button then select and load the N8000XXUDOF1 firmware.
‘N8000XXUDOF1_N8000ITVDOF1_N8000XXUDH1 _Home.tar.md5′
DO NOT check ‘Re-Partition’ option.
leave these checked: Auto Reboot and F.Reset Time check-boxes.
4) Reboot the Galaxy Note 10.1 N8000 into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.
5) Connect USB data cable to Phone. The ID:COM box will highlight and turn to a bluish color when the phone is properly connected and already recognized with Odin.
6) Tick the ‘START’ button when all is set and ready to begin flashing.
7) DO NOT Interrupt, touch nor do anything when the phone is already in flashing progress mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)
8.Wait until the phone completely reboots, then unplug it from PC.
Do factory reset again after flashing.
This is only optional just in-case you’ll experience bootloop and lag issues after flashing.
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.

Sorry for the links
Don't forget to put the links in the propper way with "https://" in front of them. I just could't do it because I don't have 10 different posts helping users yet, which is kinda paradoxal since I must help people without giving links to anywhere. Also, I don't even know if I could post 10 different useful posts around here anytime soon.

I'm wondering if this kind of "update" could work on a N8010.
Any idea?
It would be nice to feel less in the past with my tab

Hogan285 said:
I'm wondering if this kind of "update" could work on a N8010.
Any idea?
It would be nice to feel less in the past with my tab
Click to expand...
Click to collapse
Well, not THIS update but there is a version of this one for N8010! I'm gonna link it here and post the tutorial for you. Check this thread by tomorrow! ^^

Thank you so much! I was looking for this since so many weeks I could only find info about the n8000.
Looking forward to your tutorial
Have a nice day.

Hogan285 said:
Thank you so much! I was looking for this since so many weeks I could only find info about the n8000.
Looking forward to your tutorial
Have a nice day.
Click to expand...
Click to collapse
Enjoy: forum.xda-developers . com /newthread.php?do=newthread&f=1736

I want android 6 for my galaxy note 10.1??????????????
My device build number is KOT49H.N8000XXUDNF2

Mahbodapachii said:
I want android 6 for my galaxy note 10.1
My device build number is KOT49H.N8000XXUDNF2
Click to expand...
Click to collapse
Install cm13
Regards