I want to replace lockscreen firmware of JF3 (I9000XXJF3) to I9000XWJM2
I dont like sweep unlock from I9000XWJM2.
thank you very much, I hope that someone can help me.
kkm
Related
I got the Galaxy S vibrant from Bell Canada. It was working fine in Canada with I9000XXJPK rom. Now back in Brazil, I'm trying to unlock using tutorials but seems that nv_data.bin is missing or file has zero bytes. Is there something I could do about? Thanks for any help.
it might be best to go back to stock JH2
JPK has been killing some internal SD on those phones
All the new JP? Froyo ROMs modified the efs to prevent you from extracting the unlock code that easily. The unlock method only works with 2.1 ROMs. It will be quite difficult to get your unlock code file back even if you flash back to 2.1 ROM. But I hear it can be done.
it's best to unlock it on 2.1 then use the code on 2.2
thanks! anyway, seems that no method works after update ... maybe the only way will be buying unlock code by IMEI.
just flash it back to JH2 or any stock 2.1
then do the unlock, it works, people have done it before check the Dev forum
AllGamer said:
just flash it back to JH2 or any stock 2.1
then do the unlock, it works, people have done it before check the Dev forum
Click to expand...
Click to collapse
nothing.. even using .nv_data.bak
Hi Guys,
Ive searched the forum, to no avail...
I would like to flash my Apollo with FroYo, but for safety's sake im trying to find a copy of my original firmware so I can flash it back and use KIES if needed.
If I type in *#1234# I get:
PDA I5800XXJG7
Phone I5800XXJG3
CSC I5800XXJG5
Does any kind person have the relevant files handy for upload please?
Also, If I flash a new firmware should they all match the original (ie the I5800XX part).
Thanks for your help
I posted the same question a week ago. I didn't get a straight answer. I had the same firmware before i flashed to XXJPM. Your firmware is XXJG7, but I didn't find it on samfirmware. I found XWJG7, but I think that is not the same, because there is xxjpf and xwjpf - the first one being older. To update via kies when the official update comes u need an official firmware, XXJG7 is official since u got it with your phone, but u cant find it, can you? So you need any official firmware, but i don't know witch are official except XXJG7... Anyway don't bother with this, you can flash froyo without backup, i did it and nothing went wrong but be cautius and folow the steps closly and when the official update comes it will be avaliable to flash via odin. until then flash any non official froyo
I have this rom and am uploading it now its I5800XXJG3 - csc xxjg5 - phone xxjg5 - pda xxjg7 will post a link soon
here you go
megaupload.com/?d=OYHZW0WX
Thanks
I see the numbers are slightly different, does it matter?
I have also read that flashing the bootloader can cause hard-brick issues, is it better not to flash the bootloader?
i did not flash the bootloader just to be on the safe side, not sure what the cl447760 & cl460190 mean all i tell you is kies see's this as the latest firmware for my phone the uk .
i got the phone three weeks aga at the carphone warehouse it is unbranded and unlocked
Thanks again for your help. I have now upgraded mine to the standard XXJPM FroYo with ODIN. Just out of interest, is there a way I could have got the old firmware off my phone into files like you uploaded?
i think you can dd them to the sd card but not sure how to do it , i googled for ages to find my that firmware on some random site because i did not like froyo after i flashed it
ive gone back to 2.1 until i can find a fix for icons not staying on the home screen from apps installed on the sd card after a reboot. other than that i was pleased with it.
I would like to use the ROM kitchen to generate my ROM, but it seems to be missing a few things is used to have. I don't mind flashing them after or somehow adding it to the ROM before flash.
I still have froyo and want to upgrade to gingerbread. I have a Bell Canada SGS and need the following.
1.) Bell Canada Gingerbead Modem
2.) Bell CSC (kitchen only has europe/other regions)
3.) Altered Phone.apk - one that does NOT have the increasing ringtone. By the time i start to hear it it always to late, if i set my ringer volume level to 8 i want it to start at 8 and end at 8.
From what i know modem and phone.apk can be flashed after via CWM or Odin, but how do you flash CSC?
You can flash csc and modem through Odin, just make sure you use the files from the right ROM. If you have a Bell Vibrant, use the Gingerbread 2.3.3 UGKG3 stock firmware.
any links for CSC that is already extracted? I found the modem.
Just put the CSC.bin under CSC and flash??
alright so i download stock Bell firmware and generated a ROM file in the kitched. Deleted the modem and CSC and replaced it with the ones from the Bell ROM.
Now i just need a Phone.apk for the ringing problem.
What firmware are you using? I'm on JVR firmware with UGKG3 CSC and modem and I'm using the non-increasing ring mod for phone.apk as well.
If you're on JVR odexed, then this should work: http://forum.xda-developers.com/showpost.php?p=16295257&postcount=23
If you're on JVR deodexed, then use this instead: http://forum.xda-developers.com/showpost.php?p=16257034&postcount=20
For other Gingerbread versions, you'll have to look around the forums since I haven't searched for them myself, but they should be around
well i'm generating a rom from the kitchen and this will be gingerbread. The kitchen uses JVT, no idea about odexed or deodexed
question.. im on stock ugkg3 (rooted and unlocked) with bell but i just simply want to put a 2.3.4 or 2.3.5 firmware and nothing else. Which one works best with bell and how can i just simply flash a firmware only. I just want better battery life and get rid of that scrolling issue while browsing.
TY.
Although I personally use CM7 stable and MIUI ROMS exclusively, I have previously used Darky and S.U.R.F.A.C.E ROMS as well. I would recommend S.U.R.F.A.C.E since its light and you can decide what bloatware packs to add. Good battery life too. Either way, I always flash the UGKG3 modem for 850 bands.
Sent from my GT-I9000 using XDA App
I use UGKG3 modem as well. I'm on TELUS
GDF01 said:
question.. im on stock ugkg3 (rooted and unlocked) with bell but i just simply want to put a 2.3.4 or 2.3.5 firmware and nothing else. Which one works best with bell and how can i just simply flash a firmware only. I just want better battery life and get rid of that scrolling issue while browsing.
TY.
Click to expand...
Click to collapse
jvt works very well with KG3 modem and csc
just use odin to flash stock jvt as your pda
lgsshedden said:
jvt works very well with KG3 modem and csc
just use odin to flash stock jvt as your pda
Click to expand...
Click to collapse
Thanks, thats exactly what i did. Had a few phone FC but other than that,works pretty good.
Hi,
Hope anyone can help, I basically bought a UK i9505 unlocked or unbranded from phones 4 u, I have since rooted and installed a few custom roms\kernels.
I'm basically looking to put everything back to stock, I am currently downloading firmware I9505XXUDMH8_I9505OXXDMHA_BTU, can you tell me if this is the latest and correct firmware?, also I don't really understand what the CSC is?, would I need to modify this and when flashing the firmware will the kernel change to an official stock or do I need to flash that as well.
Finally at present my system is modified, how do I get this back to official and 0?, I do have the triangle away app.
Any help would be greatly appreciated, I want to double check everything as I'm not that confident with the process and mainly the order of the steps in the process.
Thanks
Mav
Hi there,
I really need the 4.3 firmware for my fido s4. I am running into some issues and want to revert back to stock rom. Unfortunately since HOTFILE is down, sammobile is not the option for me. If somebody has a copy of 4.3 or even 4.2 firmware for fido, could you please upload for me and give me the link? Would really appreciate it.
Thanks,
nabeelzuberi said:
Hi there,
I really need the 4.3 firmware for my fido s4. I am running into some issues and want to revert back to stock rom. Unfortunately since HOTFILE is down, sammobile is not the option for me. If somebody has a copy of 4.3 or even 4.2 firmware for fido, could you please upload for me and give me the link? Would really appreciate it.
Thanks,
Click to expand...
Click to collapse
http://samsung-updates.com/region/?region=FMC
believe that is fido, double check the region code tho, i'm not familiar with fido.