Hey, when i press on call button, call log pops-up. I want dialpad to show first because now i have to manually select it on top. How could i do that?
Thanks
Related
I dont know if this is a really stupid question, but I dont have a solution to it...
When i have my TYTN mounted in my car it's in the open position with the keyboard visible.
While driving i would really like to operate the phone onehanded :wink:
But my problem is that when i press the green phon to enter phonemode, and dial a number on my keyboard the following happens:
If I dial 08123455, the display shows 0NNUIHJJ
If I dial the same number, but pressing the "blue cirkle key" before every input (or pressed all the time, with no hands on the steering wheel...), the display shows 0NNUIHJJ 08123455
When I press the green phone to make the call, it dials only "0"
Im I doing something wrong?
How do i call 08123455 by using the keyboard?
Thats odd. If I dial the same number with keyboard open WITHOUT pressing the blue button it shows 0NNUIHJJ 08123455 (T9 contacts lookup and number) and then if I press green again it just dials the 08123455 number. In other words it does exactly what you want it to do.
I only get 0NYUIHJJ, and only dialing 0 if i dont press the blue button
Double-click the blue circle button to make it sticky. Then type your number.
Click it one more time to unstick.
Lurker0 said:
Double-click the blue circle button to make it sticky. Then type your number.
Click it one more time to unstick.
Click to expand...
Click to collapse
I tried that to. I actually get the nubers on screen, but the phon only dials "0"
Start -> Settings -> Personal Tab Page -> Buttons
when i wanna configure a hardware shortcut button i only see Button 1 in the page which is e call button which i can configure a shortcut. There is no other hardware buttons available for configuring shortcut
How can I add other hardware button like the Middle Square Button beside the Call / Reject Call button into the s/w
Start Phone apps when Jade is 'OFF'
Currently when phone is off, to make a call I have to do this :-
- press START button >> press Phone button (or softkey) >>
Is there any way to start phone (to make call), when phone is off, just by pressing the PHONE hard button ?
Thank you.
where is the softkey?
if i got it right u might need a regedit to wake up ur phone with any hardware key else the power button (including the answer key which will start the phone dialing window)
http://forum.xda-developers.com/showthread.php?t=476493
i believe that would do.
I use AE Button Plus and it works PERFECT , u can configure every Hardbutton at the Device where u would to do what u want.
For example: I use the hangup Button (the Red Button) press normal one times for that he is make (hang up) and press the Button twice it comes another programms NOW Screen (SPB MobileShell). And... it works great
How to make a shortcut (e.g. in Programs) by pressing once activate /deactivate phone without opening the Comm Manager?
Press and hold the "end call" button.
youser said:
Press and hold the "end call" button.
Click to expand...
Click to collapse
No. I don't want to lock my device.
I want sometimes to use it like ppc only without phone mode, by pressing a shortcut (not hard button).
I don't want to go to Comm Manager to setting off the phone mode from there.
try this app:
Thank you oldsap.
Hi everyone,
I recently traded my HTC Touch dual for Leo, and so far I'm pretty impresed, and I really really like it. I've had it three days and charged it three or four times already, because I can't stop playing with that phone.
However, today I noticed the first thing that annoyed me, and it did so pretty instantly.
I was playing around in Sounds and notifications, and I enabled the hardware button click sound, (didn't enable the screen tapping sound), and noticed that most of the time the dialer would immediatly dial the last dialled number upon key press, the same effect as pressing the hardware pickup button twice very fast. After disabling the hardware button sounds, the issue was resolved, so I don't worry to much about it, but I'm curious if anyone can replicate this behaviour on his/hers HD2...
During all this playing with the dialer and accidently dialing numbers I noticed how I can't just select a number in the dialer, it automatically redials from my call list. So I never actually have to press that green "Talk" button, the call I select is just immediatly dialed. This is very annoying, als the context menu is only useful for the last call (or the first number on the list).
The dialer also 'quits to desktop' immediatly when I hang up by tapping the red end call button. No call summary? No need to close the dialer?
I was wondering abour your dialer behaviour: does is dial out on screen tap, or does it just select the number? How about ending calls?
Grtz
Lukas
Yes, I hate the dialler app. I only use it for dialling fresh numbers not in my contacts list, or my voicemail (press and hold #1#), otherwise I use the contacts app. The dialler does dial out on a screen tap and quitting the call returns me to the home screen.
So the "add new numbers to contacts after the call"-function doesn't work either? I assume it's a bug? I run v.1.48 , does the 1.43 ROM behave the same way? I didn't notice...
Thnx
Lukas
*bump*
Anyone running 1.43 ROM; is this behaviour same as on 1.48?
Hey guys,
I'm gonna bump it one more time.
Can someone with 1.43 take the 10 seconds it takes to check if they can select a call in the dialer without immediatly dialing it? If it's the same as on 1.48 I won't have to flash back to it and you'll save few hours of my time, which I would greatly appreciate.
Thnx again.
Lukas
I'm not sure what your on about, but if you mean when you press the hardware call button and the dialed list appears, if you want to open the caller you press the icon on the right hand side of the screen next to the callers/name number.
Tapping the name/number calls them.
This has always been the case in all ROM's not just Leo
I've had an HTC Touch Dual, and tapping the calls opened call history for that number, with left softkey being 'call'. Pressing the call hardware button would dial out as well.
Also, after pressing 'end call' my touch would display a call summary (call duration) and wouldn't quit to desktop immedietly so I had the time to dial another number as wel.
Thnx for answering tho... I appreciate it.
Grtz
Lukas
It's by design.
You can tap the card icon instead of the number and it will open the card where you can tap the number you want to dial. I think it was done this way by design. No problems for me, save me a few taps for a call and when I end it.
Lukass,
No such issue on 1.48 WWE.
However, the tapping sound disappears after the 1st press of the green button. It reappears after pressing a different button though.
41. Enable Graphical Send Icon Button in HTC Messaging
To send a text message you need to hit the left softkey button. The following registry tweak adds a graphic send button above the paperclip button. It also changes the 'send' left soft key to a 'back' soft key.
HKEY_CURRENT_USER\Software\HTC\Manila\LSK_Send_Msg
Change from 1 to 0.
Can someone please explain me what this does?
Instead of "Send" you have "Back" in the bottom-left corner?
I am not sure I understand this...
Thanks
Well I dont have PPC right now, but it clearly states that it fives you new graphic button for sending SMS. And your old softkey changes to "back" instead. Thats about it right?
Bence said:
41. Enable Graphical Send Icon Button in HTC Messaging
To send a text message you need to hit the left softkey button. The following registry tweak adds a graphic send button above the paperclip button. It also changes the 'send' left soft key to a 'back' soft key.
HKEY_CURRENT_USER\Software\HTC\Manila\LSK_Send_Msg
Change from 1 to 0.
Can someone please explain me what this does?
Instead of "Send" you have "Back" in the bottom-left corner?
I am not sure I understand this...
Thanks
Click to expand...
Click to collapse
As you won't need to use the left soft key should you use this registry tweak, I don't suppose it matters what it is changed to...