Database Users

I'm rooted but

I still cant install blocked sources. I keep getting that message "install blocked", and I changed the install_non_market_apps field as well. I cant install apps from my sd card or from websites still. Is there a custom rom I can flash that would include "unknown resources" so you can select it.

SysAdmNj said:
I still cant install blocked sources. I keep getting that message "install blocked", and I changed the install_non_market_apps field as well. I cant install apps from my sd card or from websites still. Is there a custom rom I can flash that would include "unknown resources" so you can select it.
Click to expand...
Click to collapse
How did you change the field?
On a properly rooted ROM,
Start android, enable usb debugging. Stay in Android.
adb remount
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
reboot
there will be no toggle, but you will be able to sideload with Astro of another equivelent file manager.

attn1 said:
How did you change the field?
On a properly rooted ROM,
Start android, enable usb debugging. Stay in Android.
adb remount
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
reboot
there will be no toggle, but you will be able to sideload with Astro of another equivelent file manager.
Click to expand...
Click to collapse
I tried that method you just posted, and just tried again. Waiting for reboot, and you meant adb reboot?
I also used droid explorer and ran sql commands to update the file, it seemed to have taken that way but when I tried to install an app from the sd card using app installer it failed.
Ok I used astro and now it installs. Can I install from a website?
Thanks.

SysAdmNj said:
I tried that method you just posted, and just tried again. Waiting for reboot, and you meant adb reboot?
I also used droid explorer and ran sql commands to update the file, it seemed to have taken that way but when I tried to install an app from the sd card using app installer it failed.
Ok I used astro and now it installs. Can I install from a website?
Thanks.
Click to expand...
Click to collapse
You can install any way any other Android can now.
note: if you do a wipe, you'll need to do this step again with these AT&T roms.

confirmed this working on attn1 liberated beta, my brother is super extatic now heheh no droid explorer anything needed just download apk and install bam!

just cant get it to work
i have tried this method a few time but i always get an error:
error: incomplete SQL: update secure set value = 1 where name = `install_market_apps';

try this, save a whatevername.cmd file into the sdk folder, in my case \android\tools
cd\android\tools
adb remount
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
pause 1
adb reboot

just cant get it to work
i may sound dumb here but how do u make .cmd file...
also the error message only appears after i type in this command:
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
heres wat i see: " error: incomplete sql: update secure set value = 1 where name = `install_non_market_apps'; "
your help is appreciated

open notepad (start,run,notepad)
type the commands (copy paste) and save the file into \android\tools (provided that is where you have the SDK)
name the file whateveryouwantocallit.cmd (give it any name you want)

thnx xdafly makin tat cmd file worked perfectly....

[How To] Enable Non-Market apps on Captivate (consolidated)

(additional CHOWN notes added below. If you are getting "chown: unknown user/group system:system" read them!
Ok, we do have a WHOLE other thread that was made a sticky already, but you need to read the WHOLE thing to get all the properly interesting parts. I'll make sure I keep this OP up to date.
The following methods enable side loading and installing of apps onto the captivate, without the need of a program on a computer attached via the SDK. There are multiple methods, and for the most part, these methods that have worked flawlessly for many users here on this forum. We're just collecting them all in one post for speed and clarity.
Methods that assist in loading applications, without modification to the settings (a.k.a still need a computer attached) can be found at the collective wiki, http://samsungcaptivate.wikia.com/wiki/How_to_Sideload
ALL METHODS REQUIRE ROOT & BUSYBOX:
Root your phone, see http://forum.xda-developers.com/showthread.php?t=725555
Busybox : http://www.appbrain.com/app/stericson.busybox
Please, save a clean, un-altered backup copy of this file. To be safe. Rarely does corruption occur, but if it does, it won't be good.
Method 1: From Win7x64, Samsung Drivers, Android SDK installed.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the command prompt. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppBrain etc and run it. It will download and install the latest version for you.
From my Win7x64, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to PC, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open command prompt, follow along:
Code:
> c:
> cd \android\tools
> adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the pc,
"USB Connected select to... ", Mount
mine mounted as H:
Code:
> copy H:\settings.db settings.db
> sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> copy settings.db H:\settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Bam. Done.
Method 2: with Root Explorer
(courtesy of kirbo20)
This is a pretty easy process. I went in to Root Explorer - dbdata - databases - com.android.providers.settings, copied settings.db to my sd card, edited it on my pc with a db editor changed 0 to a 1 next to non market apps. Copied it back to the original directory, rebooted and installed a non market app.
(added by gotfolk)
again using FF plug in..
Click Secure on the left pane
click on install_non_market_apps
click edit
number 3 states value click there and type in 1. hit ok
(/gotfolk)
Please use caution. If you want to make sure the db save properly open it on your sd card before you copy and replace the original. It should open up as a readable table. If it opens up in a txt editor its corrupt. This permanently enables non market apps. You can not toggle it on and off.
( This is a sqlite3 database file, you can find many GUI editors that will be able to handle the editing, including a FF plugin. Search "SQLite" )
Method 3: with Root Explorer & Sqlite Editor & Terminal Emulator
(courtesy of ice3186)
- Open Root Explorer
- Browse to /dbdata/databases/com.android.providers.settings/
- copy settings.db to the root of your sd card ( /sdcard/ )
- Click on the newly copied settings.db in /sdcard/, with SQLite Editor installed, you can open and edit it here.
- Select the "secure" table, and update the value of 'install_nonmarket_apps' from 0 to 1, and save.
- close out of SQLite editor
- copy the modified file ( /sdcard/settings.db ), and browse back to /dbdata/databases/com.android.providers.settings/ and paste
- confirm the overwrite if asked and then open again to confirm it's been changed.
- open Terminal Emulator
Code:
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# reboot
- reboot phone.
No PC, no Mac, no drivers, no SDK. Viola.
Method 4: Mac & Android SDK
You will see "[sdcard]" through this method...I don't own a Mac so I'm guessing a bit.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the Terminal. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppDroid etc and run it. It will download and install the latest version for you.
From a Max OS X, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to Mac, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open Terminal, follow along:
Code:
> cd /android/tools
> ./adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the Mac,
"USB Connected select to... ", Mount
mine mounted as [sdcard]
Code:
> cp [sdcard]/settings.db settings.db
> ./sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> cp settings.db [sdcard]/settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> ./adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> ./adb reboot
Method 5: Android SDK only
Of course, this also requires root and BusyBox.
From the android sdk tools folder in a command prompt:
note: all linux/mac should use './adb' in place of just 'adb', and place quotes on the echo statement between echo and |
Code:
adb shell
su
chmod 666 /dbdata/databases/com.android.providers.settings/settings.db
exit
exit
adb pull /dbdata/databases/com.android.providers.settings/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /dbdata/databases/com.android.providers.settings/settings.db
adb shell
su
chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
chown system.system /dbdata/databases/com.android.providers.settings/settings.db
reboot
NOTICE
You must chown the settings.db file and reboot once it is back in its original location. If you do not, you will not be able to alter settings such as WiFi,GPS, default Ringtones, etc. It's also highly likely that you may wish to chmod to 660 (-rw-rw---), so I've tacked that in here and above.
Code:
> adb shell
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Chown Note
In the event that you are getting "chown: unknown user/group system:system" please try 1000.1000 as this has been reported to work on several of the samfirmware-released roms that fail with this message.
Absolutely do not use someone else's settings.db unless you specifially make it a point replace android_id with your android_id!
Special Note
Any of these adb comments can be run from Terminal Emulator (Android Terminal Emulator, free) from the su command. I use the ADB here as it is a lot easier to type into. Terminal Emulator will provide you with a shell that is an exact match of the 'adb shell' command, as they both simply provide the shell to you.
Result:
After completing this process you will be able to load non-market apps directly from the APK files, SDK tools, tools such as DroidExplorer and apps such as APKtor.
You will be able to download the APKs directly, and then install from your favorite file browser (e.g. MyFiles(s), Astro(f), RootExplorer($)...)
Tools
SQLite Administrator (Win, GUI, no FF required) http://sqliteadmin.orbmu2k.de/
SQLite Manager (FF addon, search for it)
Application links
Root Explorer http://www.appbrain.com/app/com.speedsoftware.rootexplorer
SQLite Editor http://www.appbrain.com/app/com.speedsoftware.sqleditor
Terminal Emulator http://www.appbrain.com/app/jackpal.androidterm
BusyBox http://www.appbrain.com/app/stericson.busybox

bump.. settings.db people.. please read the threads!!

good stuff!!!

Ok. I can find settings.db with root explorer. i can copy it and i put it in my sdcard folder but nothing is there when i try to find it on my computer. Im trying to use SQlite editor on firefox. Im also on a powermac g4 if that makes a difference. I did download sqlite editor on my phone and I can find where to change the values for installing non market apps but when I change from a zero to a one it denies me. Please help

Ok, so let me make sure I have your process:
- Rooted
- Installed busybox ?
- Installed Root Explorer
- copied settings.db to /sdcard
-- cant see the file when mounted to Mac, thus can't edit with FF plugin
-- SQLite editor for android wont allow access..
(is this the SQLite Editor you used? http://www.appbrain.com/app/com.speedsoftware.sqleditor)
Try installing "Android Terminal Emulator" from the market (http://www.appbrain.com/app/jackpal.androidterm)
- open Terminal Emulator
$ su
# cd /sdcard
# chmod 777 settings.db
# exit
- Open the sqlite editor, and make the change
- back to Terminal Emulator
$ su
# chmod 660 settings.db
- proceed with rest of instructions.

how many more threads do we need on the same thing? We already have ALL of this info posted, several times.

designgears said:
how many more threads do we need on the same thing? We already have ALL of this info posted, several times.
Click to expand...
Click to collapse
Please read my initial post, first few lines. I explained why, specifically: Consolidation.

Thanks I will give it a try later today.
Sent from my SAMSUNG-SGH-I897 using XDA App

- OP updated to reflect stock ownership settings for 'chown'
Also, which sqlite app are you using? I'll put that up as method 3 if it works out nicely for you.

fixed a typo in the chown command.. bad copy paste.. bad.. doh.

added method 3 courtest of ice3186

added links to Root Explorer ($), SQLite Editor ($) and Android Terminal Emulator (free) and added the chmod/chown commands to method 3, as they were skipped by accident.

bump** for newcomers, sry.

thanks max for adding the third method. this was by far much easier than the first two methods. I have a hard time getting my mac to talk to my phone sometimes and it was good to not have to plug the lil guy in at all. Worked like a charm

myself and ice3186 are glad we could be of help

If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do

mkslt4 said:
If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do
Click to expand...
Click to collapse
Did you make any kind of backup before hand?
You may have to use someone else's settings.db and then do a factory reset.
Depending on how much you've done with the phone I'd suggest deciding on doing a the reboot process for rooting, but choosing to clear data. This may rebuild it, I am not sure.

my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..

xetrev said:
my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..
Click to expand...
Click to collapse
Oh, if it's running, then this folder isn't actually empty.
What are you using to browse this folder?

i followed this guide to a T yesterday when i did this. I used option 1, ADB commands on terminal since i'm a mac and it was super easy, did it in about 5 minutes.
this is just my opinion but i think everyone should try playing with the ADB commands, they're actually really useful and educational to know. and if you should brick your phone, just use clockwork recovery to restore it.
that being said, maybe you should add a disclaimer that when done on a mac, the adb commands require a "./" in front (so adb reboot becomes ./adb reboot). cp, chown, and chmod commands don't need it though (or at least i didn't).

Install 3rd party apps on stock, rooted Aria

Since it took me over an hour to finally get this to work, I figured I would make a new post. (That's a long time to just change a 0 to a 1)
If you want to use your stock Rom but are rooted then this is the easiest way to be able to install non-market apps. I take no credit for this as it is from a post from Attn1 (thanks!).
HTC Sync does not have a choice to add apps in the latest version that I have, I don't know if did before, but I could not get it working. We can all thank AT&T
for this!
Put your phone into Recovery mode.
Goto advanced>mount system and mount data.
Make sure your phone is recognized by adb devices in
your Terminal program.
If not you can use adb kill-server then adb start-server
If you're using linux then you need to precede the adb command
with ./adb
Follow the directions below and you will installing non-market apps
in no time.
NOTE: You MUST have root access in order for this to work
sqlite3 is included in the Android SDK tools, so this would be the best way:
* COMMON
* Enable USB debugging (settings > applications > development > USB Debugging)
* adb remount
* adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
Linux/OS X
* echo "update secure set value = 1 where name = 'install_non_market_apps';"|./sqlite3 settings.db
WINDOWS
* echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
COMMON
* adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
* Reboot phone and sideloading works. (thanks fluffyarmada)

Yes!!! Thank you, this worked! Rooted, stock HTC Aria 2.2.2.
The only problem I had was that sqlite3 was in the "tools" folders, so I had to copy it into "platform-tools."

Side load wonder machine
Sent from my SAMSUNG-SGH-I897 using XDA App

thankz dude..it's work
my thumb is for u

[Q] Permissions problem using adb to push app

I'm running a script to modify settings.db (found in the application forum) so that I can wirelessly tether and use the GPS on my phone while running Google Maps on the KF.
The script starts like this:
adb shell rm /data/local/tmp/*
adb push zergRush /data/local/tmp
adb shell chmod 755 /data/local/tmp/zergRush
adb shell ./data/local/tmp/zergRush
Click to expand...
Click to collapse
and works fine.
But I'm having problems running the script that others are having no problem with at this point in the script.
adb pull /data/data/com.android.providers.settings/databases/settings.db
copy settings.db settings.bak
sqlite3 settings.db "update secure set value=1 where name='mock_location';"
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
adb reboot
Click to expand...
Click to collapse
The script runs into permission errors. I have all the files in the same directory as adb in the platform-tools folder. adb is communicating with the device with the adb devices command. I run the .bat file from the folder while in a DOS command shell. And I get this error
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb pull /data/data/com.android.providers.settings/databases/settings.db
failed to copy '/data/data/com.android.providers.settings/databases/settings.db' to './settings.db': Permission denied
C:\Program Files (x86)\Android\android-sdk\platform-tools>copy settings.db settings.bak
The system cannot find the file specified.
C:\Program Files (x86)\Android\android-sdk\platform-tools>sqlite3 settings.db "update secure set value=1 where name='mock_location';"
Error: no such table: secure
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
failed to copy 'settings.db' to '/data/data/com.android.providers.settings/databases/settings.db': Permission denied
Click to expand...
Click to collapse
Any idea what's going on?

i assume you'r at the $ prompt - if you type in su the prompt should change to #
perhaps a hint in the right direction ...
zergrush does'nt work anymore since 6.2.1 and burritoroot

I am not at any command prompt when running the script. I'm at the Windows prompt, and I just execute the script name?
Confused.

when you type adb or adb shell your mostly at the $ prompt
when you type su the promt usually changes to # - thats root access
i think you have to integrate that in your script ...

I added
adb shell su
to the start of my script, but then it just hangs at the root prompt.

if you have rooted with burritoroot try "adb root"

It says:
adbd cannot run as root in production builds

ok then i think you will have to try it with the su method - maybe "adb su" could work - it's just a try
otherwise i think you will have to write a second unix stile script (ending .sh) to do the stuff and call it from your dos script or run it in the adn shell - but i'm not the unix expert - sorry
i'm running out of time now - wish you much luck with your script !!!

Anyone else please?

Resolved.….

Resolved how? Very curious

Please, how did you solved the problem ???
thanks

would be interested too !

Here's how.
I was so frustrated, didn't seem to be able to achieve root status and use ADB. So, I bought root explorer, went to directory where settings.db file was, and copied it to sdcard folder on the KF. Then brought it over to my PC just over the USB connection (KF was a Windows drive).
In Windows, ran the part of the script that replaces the "0" with a "1". Then copied it back to the sdcard folder on the device, and used root explorer to move it back to its proper directory.
Only one caution. Make sure that you don't change the permissions or ownerships of the file, that they are the same as when you first grabbed it.

[HOWTO] Overclock the MotoACTV

Using the amazing overclock module made by Tiago Sousa http://code.google.com/p/milestone-overclock/ , it is possible to modify the frequency tables on the motoACTV.
I'm not responsible for what you do to your device. This is potentially dangerous.
Extract the attached overclock.ko in some folder of your computer and open a command line in that folder. You need to have adb installed.
Issue the following commands:
Code:
adb remount
adb push overclock.ko /system/lib/modules/
adb shell insmod /system/lib/modules/overclock.ko omap2_clk_init_cpufreq_table_addr=0xc0049150
adb shell 'echo "0 1000000" > /proc/overclock/freq_table'
adb shell 'echo "1 800000" > /proc/overclock/freq_table'
adb shell 'echo "2 600000" > /proc/overclock/freq_table'
adb shell 'echo "3 300000" > /proc/overclock/freq_table'
adb shell 'echo "1 300000000 20" > /proc/overclock/mpu_opps'
adb shell 'echo "2 600000000 30" > /proc/overclock/mpu_opps'
adb shell 'echo "3 800000000 45" > /proc/overclock/mpu_opps'
adb shell 'echo "4 1000000000 45" > /proc/overclock/mpu_opps'
adb shell "echo 1000000 > /proc/overclock/max_rate"
adb shell "echo 45 > /proc/overclock/max_vsel"
This will create 4 frequency steps:
300MHz. This is the minimum we can get with the current kernel.
600Mhz. This is the stock highest speed. Now the voltage is lower.
800Mhz.
1Ghz.
Now, you can use a program like setCPU http://forum.xda-developers.com/showthread.php?t=505419 to set the maximum and minimum speeds.
Enjoy

On this command (after copying and pasting your commands above):
Code:
adb shell 'echo "0 1000000" > /proc/overclock/freq_table'
I get a return of:
Code:
The system cannot find the path specified.
I tried next to re-run:
Code:
adb shell insmod /system/lib/modules/overclock.ko omap2_clk_init_cpufreq_table_addr=0xc0049150
but it failed, because it already exists.
EDIT: I believe they should be like this:
Code:
adb shell "echo '0 1000000' > /proc/overclock/freq_table"
adb shell "echo '1 800000' > /proc/overclock/freq_table"
adb shell "echo '2 600000' > /proc/overclock/freq_table"
adb shell "echo '3 300000' > /proc/overclock/freq_table"
adb shell "echo '1 300000000 20' > /proc/overclock/mpu_opps"
adb shell "echo '2 600000000 30' > /proc/overclock/mpu_opps"
adb shell "echo '3 800000000 45' > /proc/overclock/mpu_opps"
adb shell "echo '4 1000000000 45' > /proc/overclock/mpu_opps"
EDIT 2: That didn't work... the frequencies aren't in setcpu, even after re-detecting speeds.

can you try this command?
Code:
adb shell grep omap2_clk_init_cpufreq_table /proc/kallsyms
It should return a number, and this number is the one that has to be used for the insmod.
I haven't updated my MotoActv in a while and maybe the kernels have changed.

Code:
C:\Users\Owner\Desktop\MiniADB>adb shell grep omap2_clk_init_cpufreq_table /proc
/kallsyms
[B]c0049150[/B] T omap2_clk_init_cpufreq_table
There was no error when running the insmod the first time, it went through successfully, just the next several lines, and then no change at the end, even after a reboot and re-checking the frequencies in SetCPU.

You are right about the commands, for windows, you have to use this:
Code:
adb remount
adb push overclock.ko /system/lib/modules/
adb shell insmod /system/lib/modules/overclock.ko omap2_clk_init_cpufreq_table_addr=0xc0049150
adb shell "echo '0 1000000' > /proc/overclock/freq_table"
adb shell "echo '1 800000' > /proc/overclock/freq_table"
adb shell "echo '2 600000' > /proc/overclock/freq_table"
adb shell "echo '3 300000' > /proc/overclock/freq_table"
adb shell "echo '1 300000000 20' > /proc/overclock/mpu_opps"
adb shell "echo '2 600000000 30' > /proc/overclock/mpu_opps"
adb shell "echo '3 800000000 45' > /proc/overclock/mpu_opps"
adb shell "echo '4 1000000000 45' > /proc/overclock/mpu_opps"
adb shell "echo 1000000 > /proc/overclock/max_rate"
adb shell "echo 45 > /proc/overclock/max_vsel"
Do not reboot! This changes are not save anywhere yet. It's a bit dangerous because the system will not boot if you put wrong values in there. I'm leaving this for later.

Good work, however the changes are not persistent to reboots. I put them in init.goldfish.sh but still not persistent. When doing it from shell, the changes are there in SetCPU, just not after a reboot. Maybe we could script it somewhere else to start at reboot...
Regards...
I added init.d to the /system/etc folder and added my script - still nothing
I added the script in other shells but still nothing...
I heard that SManager will boot scripts at logon, maybe this is the way to go?

There are a few scripts that are launched by init directly. One for the keyboard, one for preinstall, etc.
Try adding the insmod and echo commands to one of those. I'll test this later and post about it.

I amended the one for the keyboard, no dice. I am going to try again though... keep you informed.
init_prep_keyboard.sh keeps reverting back to what it was before amendments. I am sure that I verified its permissions prior to reboot, it just went back to what it was before and deleted the .BAK file too, wierd.
Peace

Working Solution...
I've tested the method above and it works perfectly.
But as mentioned, the script has to be executed upon every reboot.
Working Solution !!!
I've tested this and it works 100%
- Dump boot.img from watch.
- Extract and decompile boot.img
- Create overclock.sh and put it in etc folder from boot.img
- Write entire script in overclock.sh
- Open init.rc from boot.img
- Add exec /system/etc/overclock.sh in init.rc
- Save changes to init.rc
- Repack boot.img
- Push modified boot.img to watch via fastboot
- Restart watch.
Consider adding overclock.ko in system.img
Overclock is now permanent !!! Even after reboot :-D

tansoftware said:
I've tested the method above and it works perfectly.
But as mentioned, the script has to be executed upon every reboot.
Working Solution !!!
I've tested this and it works 100%
- Dump boot.img from watch.
- Extract and decompile boot.img
- Create overclock.sh and put it in etc folder from boot.img
- Write entire script in overclock.sh
- Open init.rc from boot.img
- Add exec /system/etc/overclock.sh in init.rc
- Save changes to init.rc
- Repack boot.img
- Push modified boot.img to watch via fastboot
- Restart watch.
Consider adding overclock.ko in system.img
Overclock is now permanent !!! Even after reboot :-D
Click to expand...
Click to collapse
Can you possibly make a patched boot.img for us?

tansoftware: This is no easy task on a windows box... I will try on Fedora...
a detailed walkthrough would be superb! i.e. How-to? Otherwise GIYF
Peace
EDIT: This ain't easy in linux either...
If you could post your modified Boot.img, that would be killer!
What bash shell did you use upon init.rc? Could you at least share that with us?

dproldan: This thing WIZZes at 1Ghz! If there were just an easier way to make it persistent across reboots... but what a difference.

I posted on the other motoactv thread a very easy way to overclock.
You need android overclock and rom toolbox pro (maybe the free version works I have no idea)
1. Open android overclock select advanced/custom.
2. Scroll to bottom and select apply preset. This gives you four slots 350, 500, 800, 1000.
3. Open rom toolbox pro, performance, cpu control.
4. Slide the bar to desired speed. You can also set profiles in this section to clock down to 350 while the screen is off etc.
I was able to apply at boot etc and haven't lost the overclocking settings. With cf-bench my score went from 1504 to 2370. You can probably apply settings beyond the slots listed above but you will need to increase the voltages in android overclock. I haven't had time to try it. Another microsoft certification exam this week.

Updated Method...
Jeff said:
tansoftware: This is no easy task on a windows box... I will try on Fedora...
a detailed walkthrough would be superb! i.e. How-to? Otherwise GIYF
Peace
EDIT: This ain't easy in linux either...
If you could post your modified Boot.img, that would be killer!
What bash shell did you use upon init.rc? Could you at least share that with us?
Click to expand...
Click to collapse
I can't share my boot.img at this time as it is highly experimental and could easily & un-reversibly brick your watch. My boot.img contains a modified bootstrap.bin that flashes upon boot and forces Android to boot from the built-in MMC instead of internal nvram. Extremely buggy at this stage with several crashes but I'm no longer limited by the 256mb ram on the watch. Hopefully after the bugs are ironed out, we can all enjoy full 8/16 gigs of space. This trick was taken from the nook color modified boot code.
As for how to embed the code into your own boot.img, I believe @Prack posted a simpler cleaner method to overclock the watch. If his method does not work as explained, I'll provide a more thorough explanation of my method.

tansoftware said:
Extremely buggy at this stage with several crashes but I'm no longer limited by the 256mb ram on the watch.
Click to expand...
Click to collapse
Uh what?

eXecuter.bin said:
Uh what?
Click to expand...
Click to collapse
My guess is he's talking about a swapper2 or some other swap file. It helps but it by no means replaces having more ram. I was on a droid 1 for years and the biggest issue with that phone was the ram/internal storage space. I used swap and 2nd sdcard partitions to make up for it. I'm guessing he's doing the same thing with the watch. Would be interesting to see if he gets any actual improvement.

any more news on this?

permanent settings for the overclock
Attached is a modified "loadpreinstalls.sh" file that will load the module and apply the settings at boot.
Be careful with this, it can prevent your device from booting, requiring a full system reinstall to bring it back.
so, download the overclock.ko from the first post, download and extract this loadpreinstalls.sh to the same folder in your computer and issue this commands from a terminal:
adb remount
adb push overclock.ko /system/lib/modules/
adb push loadpreinstalls.sh /system/bin/
adb shell chmod 755 /system/bin/loadpreinstalls.sh
adb reboot
Now you can use SetCPU to choose the speeds you like and make its changes permanent.
This is working fine for me with the current MotoACTV system releases, it could be broken for some older versions.
Enjoy

This sounds like an awesome application - any way to make it easier for the lay (er) people that know just enough to be dangerous?

mattyv said:
This sounds like an awesome application - any way to make it easier for the lay (er) people that know just enough to be dangerous?
Click to expand...
Click to collapse
How about this. I just wrote a simple windows install script and included all of dproldan's needed files, so all you have to do is unzip this to your desktop and run "runme.bat".
Pre-requesites:
-ACTV must be rooted
-ACTV must be plugged into computer and turned on normally
Called it "dproldan_overclock".
Even included the ADB drivers.