Hi,
I have a wireless router at home , IP on demand, DNS address, server "x" (not needed since it is in DHCP, ok);
At office my wireless router has fixed IP, DNS address, server "y".
When I set my HTC Elf WiMo 6.1 + Blue Elves ROM up to access home network , I can not
access the office network , having to re-configure the HTC . .... and the same if I set it up to office net...
Is there a step-by-step procedure to get both working ?
Thanks in advance
Eduardo
Related
into teeny weeny little pieces.
I feel so much better now!!
Anyways...I have a wireless home network up and running and would like to connet the xda to it.
I can connect to the router no probs but IE cant connect to the web. it says "the page you are looking for cannot be found".
Any ideas why I can connect to the router but not to the web?
Cheers folks - thanks
I know how you feel. There are a couple things you have to do.
First check that you have selected to connect via "work".
Then ensure that the IP address shown is in the range of 192.168.0.X
had no problems with my wifi on my home network, as ale210p said, I think it's with the way your connect via "work" or "ISP" is configured
hiya folks
thanks for coming to my rescue..hopefully i can get this thing on the road.
- in connections - advanced - select networks. both selections are set to "my work network"
- in configure network adapters - network adapters. the "my network connects me to" dropdown is selected to work.
- where can i check my ip address on the device?
Alhtough I am connected to my wireless network as that what the wireless LAN manager says?
any ideas guys?
many thanks
Is your internet provider checking the MAC address? my provider checks for the MAC address and hence I had to register my MAC address first with the provider.
I'm pretty sure my ISP isnt checking my MAC address as my PC and other computer on the network work fine with regards to internet access and I never gave the MAC addresses to the ISP.
However, my modem router does have mac filtering enabled. I have copied the MAC address of the xda to the allowed list. However I've also tried to turn this filter off and the result was the same....I still could connect to my home wireless network but had the same error message when trying to surf through pocket IE.
Any other ideas on why I can connect to the network but IE wont let me surf?
thanks again
I'm having exactly the same problem as Richard. What I don't understand is, I can drive around and find free residential wireless hotspots and surf the net , but I can't do it on my own WLAN!
IP info OK?
These symptoms could indicate that vital IP info is missing on your XDA.
Does your XDA get an IP address + gateway address + DNS server address from the router's DHCP server? Use vxIPConfig to determine this http://www.cam.com/windowsce.html
I know for a fact that many times (not always) my QTEK 9090 does NOT get the required IP info from my SMC Barricade 2804WBR b/g wireless router, so I started using fixed addresses on my QTEK.
If I use DHCP, many times I can connect to the router but am unable to access the internet... Because the QTEK has not received an IP address/gateway address/DNS server address in those cases. Fixed addresses always work.
whoa
thanks for the advice. i installed the app. rubbed the sticks together and there were sparks i tell you!!! but what does it all mean?
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255
im no tekkie so am not sure what the above means? does it provide any clues?
thanks for the advice so far
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
richard321_blue said:
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
Click to expand...
Click to collapse
Fixed IP address is good, but have you also put in the gateway address and DNS server address? Normally the gateway address + DNS server address = router address.
If your routers IP address would be 192.168.1.1 (quite common address), then your IP address could be 192.168.1.2, gateway address would be 192.168.1.1 and DNS server (name server) address also 192.168.1.1.
BTW; this:
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255 <========= !!!!
means that DHCP didn't work!
I suppose that when you state "connect to the wlan" you mean that you can 'see' machines on your local network? Or what? That would make sense because you wouldn't need a gateway address and DNS server address for that normally (broadcasts).
siliconaddict....you're a genius!
finally it works, it works i say.
fantastic.
thanks to all for the advice and feedback - much appreciated.
can i stoke the fire and ask how i can sync via wifi as well?
never done it myself, but here is a guide
I have never synced over WiFi myself, but here are some guides:
http://theillustratednetwork.mvps.org/WM2003/ActiveSync/WM2003ActiveSyncConfiguration.html
http://forum.xda-developers.com/viewtopic.php?p=132820
Please note that the next version of Activesync, version 4, doesn't do syncing over Wifi anymore...
Good luck!
Sorry to be a complete noob, but:
1. How do I find out the IP Address of the XDA (Is it in Wireless LAN Manager, under "current config" and "IP:"?)
2. My Netgear USB WLAN is showing an IP of "0.0.0.0" (on command prompt >> ipconfig) How do I change this?
Thanks
Q & A
A 1: On your PDA use Use vxIPConfig for this http://www.cam.com/windowsce.html. Unfortunately the OS doesn't have a standard utility for it, like 'ipconfig'.
A 2: Does your router hand out IP addresses at all? Or: is DHCP enabled on your router? If true, do you have the correct drivers loaded for that USB NIC? In Device Manager how does it look? Yellow exclamation mark? Can you post the output of 'ipconfig /all'.
Hi all,
I have a Jasjar and can't access or should I say need help with setting up access through a Netgear Router. When I am at home I enter the ip address of the computer I want to access and it works awesome through the wireless network running through the Netgear router, but if I try to connect using the phone away form home it can't connect. I am assuming that it works at home as I am allready with in the network being that I am on the wireless network and when I am out I can't get in to the net work, I have no security on the router but I do have firewall turned on on the computer.
Router is Netgear WGR614
Any help please... :roll:
In your router: forward port 3389 to the ip of the pc you want to connect.
And if you connect using your phone(gprs), enter your home WAN-ip, ofcourse...
How do I find what my Home WAN-ip address is?
Thanks for the help
Find your internet IP Address
http://www.whatismyip.com/
Find your internet IP Address
http://www.whatismyip.com/
Thanks heaps, it is all working now. :lol:
Hi,
I can connect to my home router no problem. the connection strength is good but when trying to access sites thru the connection it always comes back as failed? When i do the same thing thru GPRS it works fine?
any ideas?
Do you have an IP address, do you use proxy settings, ... :?:
I have the same problem.
When i choose automatic ip adres and dns servers it could not connect to my router.
I must set the ip adres and dns server manual then it could connect to the router.
Grtz
leonreijnders said:
I have the same problem.
When i choose automatic ip adres and dns servers it could not connect to my router.
I must set the ip adres and dns server manual then it could connect to the router.
Grtz
Click to expand...
Click to collapse
I can connect to my router no problem, view the ip, and see the signal strength no problem it's just when i wanna use that connection to access the web thats when i get an error? It has worked in the past no problems i just aint treid it in a while. I havent changed anything to do with my router plus i'm also running my notebook wirelessly so i know the routers fine.
cheers
i wants to know how can i access some unsecured network that are near my work place. Basically there are some unsecured network near my work, i have tried to connect to these networks so that i can use internet. However i have no luck in accessing it.
Do i need to enter any ip address in the network adapter or the ip address is automatically taken????
At the moment i have assigned the ip address to 192.168.1.201 so that i can connect to my orange live box.
Thanks in advance
it depend on the wifi router setup
as default it run dhcp and asign you an ip
but that can be turned off
some wifi's require a login to the internet isp's site or telnet to open for internet (i know my home one does)
also you cant really see if a wifi router use mac filtering
for security then it will just not route for you if your mac add is not on it's list
I can`t go into the Web via T-Mobile after I went into the web via WLAN
My wlan configuration is as follows:
network: Broadcom 802 DHD etc...
IP: I must put it in
Subnet 255.255.0.0
Standardgateway 172.16.1.1
DNS 172.16.1.1
Only when I erase the configuration I can go into the Web via T-Mobile but then
I can`t go into the Web visa WLAN
Crazy
What I get is that there is a "DNS error" when I try to go into the web via T-Mobile....
Is the challenge to guess your Windows version, ROM and installed applictions, browsers etc?
There's a thread for Q&A's, this is ROM Development.
Windows version: WM 6.1
ROM: The original rom from HTC
browsers: opera and IE
Pls help me because all WLAN and T-Mobile codes seem to be right
Although you dind't specify anything about the ROM and OS version you have, I can tell you a little about the way IP addresses work and why you're not having internet.
Every computer on the internet has an IP address and that is used to identify it. However there are on a home network more than one computer, so you have a router that re-routes your internet through it's own range of IP addresses. Meaning you get an IP from your provider, which your router stores, and your router gives all computers in a network an IP address. This way every computer in your network can connect to the internet without the ISP having to give you more than one IP address.
Normally routers work with a technique called DHCP, dynamic host configuration protocol, which allows all computers in the network to communicate and share addresses. So without having to enter information manually a computer knows that the DNS is 172.16.1.1 (for example) and that it's IP is 172.16.1.*. If you disable this technique you must enter the information manually.
This isn't a problem until you need to connect to more than one network. Since every network has it's own set of IP ranges, it's own DNS, etc. So when you connected to your WiFi and manually entered information for your home network you disabled the ability to connect to T-Mobile yourself. Since the IP you get from T-Mobile isn't the same as you use in your WiFi network.
The other way around is the same, when you connect to T-Mobile your getting an IP address assigned automatically, howevery our WiFi network doesn't give you one automatically and thus resulting in no internet connection.
I hope that made sense to you, kept it as simple as possible. Also I hope you can fix the problem... normally you can do that by enabling DHCP in your router by logging in into the device. (You usually do this by entering the IP address of the default gateway into your webbbrowser.)
peter7 said:
I can`t go into the Web via T-Mobile after I went into the web via WLAN
My wlan configuration is as follows:
network: Broadcom 802 DHD etc...
IP: I must put it in
Subnet 255.255.0.0
Standardgateway 172.16.1.1
DNS 172.16.1.1
Only when I erase the configuration I can go into the Web via T-Mobile but then
I can`t go into the Web visa WLAN
Crazy
Click to expand...
Click to collapse
KilZone - thank you so much for your kind answer !!!
I do only have an access point no router ?
Is this possible too ?
I think the access point functions as a router too, not sure about that, but you can try by entering the default gateway into your browser and see where you end up.
peter7 said:
KilZone - thank you so much for your kind answer !!!
I do only have an access point no router ?
Is this possible too ?
Click to expand...
Click to collapse
moved out of dev
Dupe thread.