yesterday my phone get crazy, start switching on by himself all the time iam presing off button and in one sec the screen activating again its no way to switch off screen only one way is to switch phone for good... any idea? its not the screen problem or button problem...
Related
So I run S2U2 and have it set to blank screen on talk. This works great since I occasionally would hang up on people or press buttons when my face touched the soft buttons on the screen. However, I also have Key Lock setup so my phone doesn't randomly come on all the time and drain the battery while it's in the holster. I also had a couple occasions (before turning on key lock) where S2U2 didn't come on and I ended up calling someone without knowing it.
Anyway, the problem I run into now is that when I'm done on the phone and want to hang up, the end call button is locked out and I have to first press power to get the screen back and then hang up. Is there something in between where I can have both the power and hang up button enabled while locked? Optimally the hang up button would only be enabled during a call so it wouldn't wake up the phone when not in use. A search brought up products like AE Buttons, but I didn't see an option to do what I want.
Thanks,
Gonz
Hi,
I am encountering a strange issue in my Tmobile hd2, the problem is when i turn the screen off by pressing the call END key, and if try to turn it on my again pressing it, then the screen does not turn On, the lights on the blinks but screen does not turn On.
I have to press the END key for 2 seconds to turn the screen back ON.
Kindly help.
change rom...
shail00 said:
Hi,
I am encountering a strange issue in my Tmobile hd2, the problem is when i turn the screen off by pressing the call END key, and if try to turn it on my again pressing it, then the screen does not turn On, the lights on the blinks but screen does not turn On.
I have to press the END key for 2 seconds to turn the screen back ON.
Kindly help.
Click to expand...
Click to collapse
Had the same thing on Android.
Chaning radio did it for me.
Have you messed with bsb tweaks at all? Its known to cause similar issues..
Sent from my HTC HD2 using XDA App
So recently i start flashing and using langthang's MIUI roms and keeping update and flashing all his new release rom. so couple day ago all of the sudden, i don' know what causes it and how it started it. my red button on far right. pressing it turn on and off the screen.so now when i press it to make the screen go back on from off mode. after i pressed the button the screen light turn on and the lock screen is there but when i touch the screen and try to move the ring(pyramid lockscreen) up to unlock, but the ring is not moving, it like there is no touch screen ability to my phone's screen.
but when i use the green button far left, the button usually to use phone. that button doesnt turn off the screen but it just turn on the screen, this button is working normally. i can move the ring up to enter the main screen.
the screen isnt cracked or any thing, but i do have a protection layer over it which been there since i got the phone and never got this problem before.
what do you guys think my problem is and how can i solve it?
thank you!
Guys I have a question... when I talk on the phone (with speakers on so I leave it on the table), the screen goes black... the problem is that every time I want to turn the screen back on I actually have to use the power button... the home button doesnt work, it's blacked (even if i have set always on display to be active all the time).
Is there a way to turn the screen back on without pressing the power button? Or have the home button active even if the screen goes black during a phone call? thank you!
Anyone?
Home button should be active at all times, you may need to press hard, blindly in the right place but it should work at least it works on mine, no problem.
You sure? Your home button works even when you talk with speakers on and the screen turns black?
tharghan said:
You sure? Your home button works even when you talk with speakers on and the screen turns black?
Click to expand...
Click to collapse
Of course it works. Maybe it has some time out function, when it disables home button after certain time, I don't know since I never talk more than few min, but when screen goes blank, couple min later I press home button and it goes straight to talk screen bypassing lock. But I have location/BT set as secure, so it never locks up when I'm home, at work or in a car and have not test it much outside of those places. So if I had to make wild guess it's one of 3: 1. it has some time out 2. something with security lock 3. you're not pressing hard enough or wrong place, you really have to press hard, like you want bend screen a little.
My S6 did this also.
Some help?....
@tharghan
Same problem...
If anyone has a solution for this problem of black screen on speaker calls!?
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Luka keko said:
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Click to expand...
Click to collapse
Hello there, I'm from Brazil, as my english may not be the best lol... So I have same phone as you and similar problem... The problem is that volume down doesn't work. Other buttons work fine though. Also, the phone always enters in safe mode, so I assumed the volume down button is being pressed all the time. Except that, I realized that I could enter in download mode (I tested, if I don't press volume down in the combo 'power button + home + volume down' it won't get into download) and if I press volume down to cancel it will actually cancel and restart the phone. So the button is working... Here is the part where I think the problem is similar. There was a time I turned the phone off, through the system as we normally do, and then it wouldn't turn on again. I realized it was actually turning on, but the screen was black. I tried entering download mode and tested on odin and it actually had entered download mode, but the screen was black... Then after several attempts it finally got back on again... So I think there is something related with the button circuit with the lcd, I don't know. I would like to know if you got to any solution there. I guess that instead of bringing you any solution I'm bringing another problem lol. Well if I have any other information I will post it here. Best wishes.