strange, I posted a question asking about an htc accessory place selling motorola and other generic car chargers, seems message was deleted
if anyone can recommend a place or make/model car charger and hard cover protective case, please post
http://forum.xda-developers.com/showthread.php?t=722628
Related
Hi
I've looked through the threads and can't find any posts with this problem.
My phone has stopped charging through the cradle or car charger. It syncs and charges through the usb and my wired sat nav connects up but neither method charges my phone. Obviously the battery will die down quick when I use my tom tom so I need that to work and only being able to charge via usb is a pain and inconvienient.
What can I do to fix it??
sounds like the chargers power supplie has blown buy a new one.
well no, cause it doesn't charge with the car charger either. so its a problem with the xda. Or did you mean buy a new XDA?
maybe the connector is broken and the pins which do the charge from other sources then the usb connectors is disconnected
you can 1 make a cable which have an usb connector in the end and AC or Car power in the other
you can change or pay somebody to change the connector in the xda
or you can buy a new pda
thanks. Know anyone who does repairs?
sorry no
and even if i did this being a somewhat international forum
me saying "yeah the guy down my street have a mobil shop and he can do it" would not help much
Done a brief search on here and cannot find the answer to my question.
I have a standard car charger which I used with my my XDA Orbit (Artemis) - i'm presuming I can use this with the Touch HD? Just that I read that the connector is slightly different on the THD....
I'm also quite tempted to get one of these CC-C100 models with the HTC logo at the top (i'm not vein, honest ). Would these would work too?
May sound like a stupid question with an obvious answer, as I know they all have the generic mini-USB connector, but just wanted clarification.
Thanks
I was wondering the same.
I picked up somewhere that the normally unused B pin of the 5 pin mini USB needs to be connected to ground to enable 2Amp charging. Othewise it may max out at 500mA. So many of the chargers sold as HTC compatible will work but will not charge full rate.
The nice one with the HTC logo do have a ExtUSB connector and are rated for 2000mA so should work full charge. I am waiting for my eBay order to come in to validate.
Any miniusb car charger should work. I bought a satnav car charger and it works fine.
see also http://forum.xda-developers.com/showthread.php?t=455097&highlight=car+charger&page=2
Hi all,
I bought an i-Go USA power plug which goes into the wall outlet.
I just need to buy the pin connector for it. But I don't know which type I should get.
If anyone knows the type, please post it. Then that way I can go into a electronics shop (here in Europe) and show them the details.
I have something similar as shown in the below image which I used for the Motorola DEFY phone.
http://i.ebayimg.com/00/s/MzAwWDMwMA==/$T2eC16d,!yEE9s5jGKoOBQE,QF1qzQ~~60_35.JPG
But now I need a similar pin connector for the S4 GT-i9505.
Please help.
I have an Android head unit I received for free, but it's missing the device cable. The unit has a sticker on the back that says AC-9216B-2+16GB. I was able to figure out what pins were for the battery connection, ground, and accessory. using some clip leads I was able to get it to power up and I found a complete wiring diagram in the settings displayed on the screen. I just need to find the 16 pin connector to be able to use this unit. The clip leads barely hold on and fall off with the slightest movement.
I'll attach some pictures with the device info and the connector.
Any help for where to buy the device cable would be greatly appreciated. It came with the GPS antenna, the backup camera cable, the A/V cable, and the two USB cables. It was just missing the main cable that has the connections for the power, and speakers. It also came with a USB dongle that is supposed to add Android Auto.
I see a lot of posts about this type of unit (8227L) with instructions for how to unlock the bootloader and flash custom ROMs. So if I can find a cable, I should be able to make this unit work pretty well.
You can buy the cable from aliexpress just search for shops:
Carload
Podofo
Both sell 8227L devices and you can get the cables from them.
Sent from my MI 9 using Tapatalk
zetlaw01 said:
You can buy the cable from aliexpress just search for shops:
Carload
Podofo
Both sell 8227L devices and you can get the cables from them.
Click to expand...
Click to collapse
Thanks for the tip. It took a little searching, but I found the correct cable. If you search for "XY AUTO Android Solution Interface" They come right up. The power cable was only $1.82. I ordered two since I was paying almost $5 for shipping. Of course they will take a month to get here from China.
Hi,
I recently purchased a usb cable for my android head unit and the lead doesn't work. I didn't buy the unit so I don't know the brand etc. The unit was in the car when I bought the car.
I'm guessing the wires that plug into the usb connection are in the wrong order. I have no way of finding out the correct order. Does anyone on the forum know the correct order or even show me a picture of their usb cable.
I've bought 2 cables so far, neither of them have worked and they cost close the £100. It's very frustrating that I can't get them to work
Thanks in advance
What does the seller suggest and what happened when you tried that.
Also, with no information and detailed screenshots, how did you want help
When I plug in the usb cable and try any basic usb connections like phone chargers usb sticks etc. Nothing happens at all.
I've attached a screenshot from a product guide I found online if that helps.
If anyone knew which pins were for data transfer or voltage, that could help me loads.
Thanks
Measuring is the magic word. 8 pins will be connected in the original cable. (VBUS)+5V 2 times and 2x GND
...then you only have to find out what is D- and what is D+ for the data lines.
If you don´t want to measure: Open the magic box and have a look at the pins from the connector inside.
Just with your picture no one can tell anything. Each supplier does it´s own magic.
By the way... Connecting that wrong, may damage the internal USB-Hub and you can buy a new mainboard... just to mention. Trying around is not a good idea.