Database Users

XDA2 Rom Has Wrong Spec?

I recently got an O2 Xda2.
The specs say Xda2 has 64MB Rom and 128MB Ram, but when I go to <Start> - <Settings> - <System Tab> and <Device Information>, the <Hardware Tab> shows RAM size 128MB and Flash size 32MB.
Is this supposed to be correct?
Why isn't Flash size showing 64MB?
Also, when I registered with this forum, and after selecting my device as O2 XDA2, the Rom Version under the drop-down box offered an option of 1.60.00WWE. However, my Rom Version under <Device Information> was showing as 1.52.00WWE. Is mine an earlier version? How can I update it?
I'm a novice Pocket PC user, PLEASE HELP!!!!

It is correct, the rom is in 2 parts I think, primary and extended, in total 64 meg.

Qtek 2020 (communication device)

Hi,
I can't connect to the internet through my Qtek (via bluetooth)! Probably i do not have proper drivers for Mac OS X Panther (10.3.7). Help!
Computer discovered my Pocket PC and Pocket see my PowerBook by bluetooth, but "Could not open the communication device."
Earlyer I used mobile phone Nokia 6310i and everything work correctly.
Pleas help!
Best Regards and Thank You
Gene
p.s.
my computer info:
Machine Model: PowerBook G4 17"
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.6.2f1

on the pc you default can only do it while being connected to activesync
and let that handle it
i mean by default that the ms bluetooth stack on the xdaII dont support the PAN profile
you can solve it by using the vidcomm bluetooth stack you can find it if you do a search in the forum for vidcomm

THX
I try...
download
http://www.bluwireless.com/Widcomm14210.zip
...but I don't know it is right sollution for my problem. :roll:

Am I right. I have Macintosh only. :?
What shall I do with this software?

well if there is a cab file in the zip then you should install the cab file on your xda

eeeh
ok I try
I have only one file with cab extension "Data1.cab"
gl hf :?

NOT WORKING!!!
I surrender

when cab files are clicked on
on the xda then they autoinstall

Stuck on SP Screen? THink Its Bricked

Okay it will turn on, and i can plug it in but it wont show up on my computer,
I"m running:
Machine name: 1NF3CT3D-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
System Model: 132-CK-NF79
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (4 CPUs), ~2.7GHz
Memory: 2048MB RAM
Available OS Memory: 2046MB RAM
Page File: 1357MB used, 2735MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
When i turn my phone on it sits at the at&t logo screen (solid white with att logo in center) and sits there till i remove the battery
I think i bricked it b.c i installed a new rom, then it started with the problems,
I have tried reset button, i have tried hard reset, i don't know of any other methods, there is no memory card or sim in when trying to boot up, but i installed the rom on the phone memory.
ANY HELP WOULD BE MUCH APPRECIATED. EITHER BY EMAIL OR BY REPLY ([email protected])

[Q] XDAndroid 2.1 (rel 2.5a).cab on T3238 clone

Hello ,
I installed XDAndroid 2.1 (rel 2.5a).cab on microsd Kingstone 2 gb,
but when start the autosetup the image is more large of the display and I can't complete the setup.
can you help me?
My device info:
cpu qualcomm 7225
speed 528 (?)
qvga 240x320
radio version 1.07.9235
model No. NEXPERIA SY.SOL 5209
Thanks
salvotg

salvotg said:
Hello ,
I installed XDAndroid 2.1 (rel 2.5a).cab on microsd Kingstone 2 gb,
but when start the autosetup the image is more large of the display and I can't complete the setup.
can you help me?
My device info:
cpu qualcomm 7225
speed 528 (?)
qvga 240x320
radio version 1.07.9235
model No. NEXPERIA SY.SOL 5209
Thanks
salvotg
Click to expand...
Click to collapse
Which device are you selecting when you first setup android? I am guessing that you need to select a device that also has a qvga resolution

Hello,
my problem is that I can't select any device, when autosetup start, the image exceeds the display , maybe I have to copy manually the default.txt on sd root but I don't know which is the right one for my device.
Thanks for your help
salvotg

salvotg said:
Hello,
my problem is that I can't select any device, when autosetup start, the image exceeds the display , maybe I have to copy manually the default.txt on sd root but I don't know which is the right one for my device.
Thanks for your help
salvotg
Click to expand...
Click to collapse
perhaps giving the other method of running Android a try? Simply copy all the files onto your device and boot haret.exe instead of running the *.cab

I alredy tried in this way,
but Hared.exe, ask me the default.txt,
and I don't know which select, when I start Haret.exe I see:
first line I must show the default.txt
and bottom:
Found machine Generic ARM 926,
Haret.exe whitout default.txt don't start
Thanks
salvotg

Salvotg have you make it...? I own a t3238 and I´m trying the same thing...

if you are not using a supported device (which refers to most WVGA devices)
you need to install android manually.
The cab is just for automation and the theory is not much different.
haret + rootfs + initrd + startup.txt + systems.ext
please make sure the kernel supports your devices... not all devices are supported with the same kernel. The best bet is to ask in the forum for your device.

After a quick check, if yours device is a HTC Jade, please give up. The kernel would NOT support your device at least in the near future.
In fact, developer need to develop another kernel for your device to work.

Thx for the answer Mcdull...

List of overclock apps for Windows CE/Mobile

I receive as a gift a chinese 7" gps-tablet with Windows Embedded CE 6.0, and of course it's weak point is the processor, I cannot handle his native 800x480 resolution, so I search for any of the most commong apps for overclock this tablet and no luck, as far I tried:
- OCT 1.5 : Error at start
- MSM7KCPUSpeed: Error at start
- WiMoSpeed: Error at start
- XCPUScalar: Error at start
¿Any thoughts?, Please if any other app exist please post it here to try.
Thanks

It would help if you would post what the error messages are, as these apps may just need some extra DLL files to work, and the error messages might provide clues.

best one for regular xscale cpus: xguru. works from tray.
as interesting feature i may add NATIVE resolution changer for drivers that allow it(what i found VERY useful).
this feature may not work with your screen, since tool's using qvga/vga/realvga standards, but i wonder, if reverse-engineering or hexedit could make it work with 800x480..
it's weak point is the processor,
Click to expand...
Click to collapse
what processor it uses?
- OCT 1.5 : Error at start
- MSM7KCPUSpeed: Error at start
- WiMoSpeed: Error at start
- XCPUScalar: Error at start
Click to expand...
Click to collapse
go to navi forums to check, if there are dll packs that may help you. use some kind of tool to determine name of dlls that overclockers are using.

Hello,
I'm very interested too, so many weeks I spent to overclock my PNA without success...
It's a no name GPS unit with the following characteristics :
Microsoft Windows CE ver 6.00
Processor : ATMEL ARM926EJ (StrongArm)
Clock speed : 366 Mhz
Memory : 128 Mo RAM
Screen : 480x272 pixels, 65536 colors
This unit is already unlocked with many tools (files explorer, registry programs, process viewer, a lot of players/readers, etc...) so I can easily access files or registry if required.
I've added also a package with .DLL files common to this kind of GPS, and well installed Microsoft .NET CF 3.5.7283.0.
There's no overclocking software working for now, here's the status of my tests :
Speed.exe (Speed Version 1.10) : unable to select something in the main windows (and must kill the process to end application).
Turbo Tray.exe (with four different program versions : 333, 400, 472, 498 Mhz) : the application seems to work, the frequency control is correctly displayed in the taskbar, all the choices or changes made seem to be taken. But in fact the frequency of my CPU is never changed and still running at 366 Mhz.
Xclkcfg2.exe (version 1.01) : nothing happens, no error message at launch, but no process in memory either.
SpeedStepper.exe : same result (nothing happens, no error message at launch, but no process in memory either).
XCPUScalar.exe : run-time error, with the following dialog box : "Application Error - Application XCPUScalar.exe encountered a serious error and must shut down."
MSM7KCPUSpeed V1 : run-time error, with the following dialog box :
(in french)
Erreur
Code d'exception : 0xc00000005
Adresse d'exception : 0x409d11dc
Lecture : 0xb5400104
Module défaillant : msm7kclocklib.dll
Offset ; 0x000011dc
... / ...
Click to expand...
Click to collapse
MSM7KCPUSpeed V2 : same as V1.
WiMoSpeed (version 1.09) : run-time error, with the following dialog box :
(in french)
Erreur
Code d'exception : 0xc00000005
Adresse d'exception : 0x409d2838
Ecriture : 0x00000000
Module défaillant : wimospeed.dll
Offset ; 0x00002838
... / ...
Click to expand...
Click to collapse
OCT 1.5 : unable to install... Seems the .CAB file isn't compatible.
And XGuru.exe does not work (no error message at launch, but no process in memory either).
Could you help me find it does not work, or another suggestion for overclocking software ?
Regards,
ps: sorry for my english I'm french

There is no generic overclock utility for Windows Mobile or WinCE. Overclock utility deals with the PLL clock generator within the SoC, so they are specifically targeted for the HW they are meant to be used with. So far, there are only overclock utility for Intel XScale, TI OMAP850, Samsung S3C and Qualcomm MSM7-series. If your HW does not have some of the popolar SoC for Windows Mobile during its time, it is not possible to make use any overclock utilities.