When trying to browse using a Wi-Fi network, it says:
-----------------------------------------------------
ERROR
Could not locate remote server
You tried to access the address
ht-tp://bbc.co.-uk/, which is currently unavaliable. Please make sure that the web address (URL) is correctly spelled and punctuated, then try reloading the page
Make sure your internet connection is active and check whether other applications that rely on the same connection are working.
-------------------------------------------------------- When browsing with GSM, 3G OR HSDPA it's fine.
It is not my Wi-Fi settings as it does this on every Wi-Fi network I try, including public networks in Starbucks, McDonalds etc..
Any suggestions?
Related
Hello all. I have a siemens sx66 with ROM 1.33.10 running on Tmobile in the NYC area. I have no trouble connecting to GPRS with the unit and accessing the internet. I use the internet3 settings and have been provisioined for VPN through TMO. If I try to connect to my small ofice LAN through GPRS and VPN it seems that I get a connection(desktop shows inbound connection established) but can not view or even ping any of the network resources in either of the two network browsers I have. It seems to me that my trouble is in knowing how to properly configure the connection manager.
As a way to rule out the subscription or network in general, I installed the SIM in a GPRS modem on my laptop and successfully connected and accessed the network resources.
If someone could give me detailed instructions for configuring the connection I would greatly appreciate it. We can start from the point that I have a properly configured GPRS internet connection in the MY ISP section of Connection Manager and nothing more. It will have to be easier than trying to correct anything I had already done with the VPN connection.
Thanks!
I am able to get a connection using Wifi with vpn and then terminal server connection to my work computer.
I am not able to do this over UMTS or GPRS, I cannot get a VPN connection.
Funny enough it seems that my UMTS connection is actually faster then when using WIFI
Your problem is interesting because I have exactly the opposite problem. I have VPN workng over UMTS, but when if I have wi-fi on & phone off, the VPN wants me to turn-on the phone to connect over UMTS!
Sorry I have no idea why this is happening.
I would like to know how both of you have done each of yours as I cant get either to work.
1. WIFI or UMTS connect...
2. Run VPN
3. Run terminal server, automatically disconnects my VPN. Servers are secure, no VPN to RDP.
Please advise your methodology as I cannot for the life of me get that VPN connection to stay on.
Dont get me wrong, UMTS, WIFI, and RDP internal of the networks works fine, just the VPN part stuffs me up
I had to create a work URL Exception under settings/connections/advanced
Once I did this there was no problem getting a VPN connection over WIFI
hmmm...
NLMCarl : may I respectuously ask wether when you turn on the wifi, it connects you to the Internet (which would explain why umts seems soo fast, since the path is the wifi then and not the umts anymore)
BBill : for your case, AFAIK, the umts is linked to the Phone provider plan (meaning the SIM card as well) so no phone means no umts at all. (very slow connection then )
Gael
Dont know if this will help but...
When I first tried a VPN over GPRS/UMTS on my Exec I, too, found that it didn't work. After a lot of testing I discovered that my provider (O2) was assigning my Exec a dynamic address on the 10.x.x.x network. Unfortuantely, my home network was also a 10.x.x.x network. Therefore, when the VPN was up and I tried to access my home network through the VPN, it didn't go through the VPN at all, but just tried to access a device on O2's local 10.x.x.x network. This, of course, didn't work.
For me, the fix was to change my ip addresses at home to avoid the conflict. I am now on 172.19.x.x at home and haven't had a problems since.
Hope this helps.
Mark
Please don't kill me but I want to know
HOW to make use WiFi instead of network on browsers and mail, once I connect?
once you connect you to a wifi network it should be just like using wifi on your computer.
a more specific question or example may allow someone to help you more.
The phone uses Wifi where possible by default. However as my push mail is running over the Vodafone Internet APN I have found some occasions where my browsing session wasn't using Wifi.
So I created my own homepage which tells me the IP address I'm on and works out if it's my wifi router or the Vodafone Internet. It also has all my bookmarks, which is a better than the built in solution from Opera.
If you aren't using the GPRS all day, try NoData which can block all GPRS usage.
artesea said:
The phone uses Wifi where possible by default. However as my push mail is running over the Vodafone Internet APN I have found some occasions where my browsing session wasn't using Wifi.
So I created my own homepage which tells me the IP address I'm on and works out if it's my wifi router or the Vodafone Internet. It also has all my bookmarks, which is a better than the built in solution from Opera.
If you aren't using the GPRS all day, try NoData which can block all GPRS usage.
Click to expand...
Click to collapse
Aha, the old friend from MySymbian
Well I'll try that NoData but good to hear X1 wants to use it by default (when connected). I don't use any push messages.
It's a Vodafone ROM thing. if you flash to another ROM it will work fine.
WiFi problem
No man, I have a Vodafone UK Xperia. problem with Wifi initially, then I've ROM it to the generic UK version...now it connects to Wifi but I cannot browse anything with it. The pages don't load and status keeps saying 'loading...' but nothing happens and after a min or so, a message saying that I have to check my internet connection...not connected!
OoLoLo said:
No man, I have a Vodafone UK Xperia. problem with Wifi initially, then I've ROM it to the generic UK version...now it connects to Wifi but I cannot browse anything with it. The pages don't load and status keeps saying 'loading...' but nothing happens and after a min or so, a message saying that I have to check my internet connection...not connected!
Click to expand...
Click to collapse
Then you have your Wifi settings incorrect.
How come u say my Wifi settings are incorrect? How can I correct it? In wat way? my laptop etc connects to the Wifi fine...and the phone as well...but it just that the phone doesnt seem to load anything from internet when I'm connected.
First Check if you used the correct Key for your wifi if thats fine then ....
I've never had this problem with the xperia but I have had with other windows mobile phones it was probable because of older versions of windows mobile, if wifi is connected fine go to Settings -> Connections Tab -> Connections -> Advanced Tab -> Select Networks, then select My Network for both drop downs.
OoLoLo said:
How come u say my Wifi settings are incorrect? How can I correct it? In wat way? my laptop etc connects to the Wifi fine...and the phone as well...but it just that the phone doesnt seem to load anything from internet when I'm connected.
Click to expand...
Click to collapse
Because you are unable to surf the internet, which points to either the settings entered incorrectly (normally when using WEP) or your router needs a firmware upgrade.
Ok here's a complete answer to my question
HOW to make X1 to connect to WiFi ONLY:
Install NoData (thanks for tip!!!)
Turn this on to NOT transfer any network data.
All the browsers I tried (Opera Mini 4.2, Opera Mobile 9.5)
automatically connect by WiFi, so it's great.
Email NOT. But it's enough to
go to email account settings and in advanced server settings instead of your providers network
choose "The Internet".
Violaa, the email account also connects through WiFi.
Hope that helps somebody
Where do i get no data please
There's one topic here called no data cab file!!
Just find it and it's there!
i got problems with my fritzbox 7270, too.
but i solved it.
just set the 802 adaptor manual to your wifi settings.
free ip adress in your segment, gateway, nameserver.
i think its a dhcp problem, with my 7270.
Hi there,
I have a question about an annoying problem that I've only managed to find one (unanswered) question to on the web.
I am currently using WM6.1 and I use to read email from my Hotmail account, amongst other things. The problem is that the messaging client ALWAYS tries to download my mail via 3G/GPRS even when there's a WiFi connection available. This occurs both when I initiate the send/receive using TouchFlo 3D or from within the mail client.
Connection manager is, as far as I'm aware, configured correctly, and PIE/Opera/weather will all happily use WiFi to connect to the internet, only using my data connection when WiFi isn't available.
The same results occur with connection manager configured in either of the following ways:
Internet Connection = "My ISP" settings with 3G modem connection
Work Connection = Default "My Work Network" settings
WiFi Access Point = Connects to Internet
Network Card = Connects to Internet
OR
Internet Connection = "My Work Network" with 3G modem connection and "This network connects to the internet" enabled
Work Connection = As Internet Connection
WiFi Access Point = Connects to Work
Network Card = Connects to Work
Interestingly, if I disable my data connection and enable WiFi I CAN send/receive mail over the WiFi connection, so it seems like the data connection is being used in preference to the WiFi one.
Is this a known issue or am I doing something wrong?!
Thanks,
Mike
Known issue and it is a pain as I don't have any mobile coverage in the house but I do have a wifi network but can't sync hotmail through Wifi
Same frustrating issue here. Hate it.
Even tried the modaco nodata hack so that windows live didn't even know that I had data, and with wifi going great it just says there is no connection. Pretty retarded.
yes mines too there should be away to change this Setting.
This is a real pain for sure. But I have experienced that if I turn off the phone copletely and then connect to the internet via WiFi hotmail does sync via the WiFi-connection. Just thought that I would mention this as a possible last resort.
It may also give some ideas to people trying to fix this... shortcoming.
trondkk said:
This is a real pain for sure. But I have experienced that if I turn off the phone copletely and then connect to the internet via WiFi hotmail does sync via the WiFi-connection. Just thought that I would mention this as a possible last resort.
It may also give some ideas to people trying to fix this... shortcoming.
Click to expand...
Click to collapse
Hmm strange I will have to try this out.
Thanks!
any Updates?
I have this same problem as well
The only way seems to be to turn your phone off and then use Wifi.
oh i will try it so basically turn the Phone on Airplane Mode
Here's the problem.
When I try to connect to my University's network , the Galaxy S is able to connect JUST fine. However, when I open a browser it says the incoming certificate is not secure and then I have NO INTERNET on any page.
What the network is supposed to do is redirect me to the login page so that I can register the device to the network. My phone can't do that apparently and just sits connected to the network with NO INTERNET connectivity. How can I fix the problem?
This is the university network and the instructions how to get on it for Android devices:
http://www.colorado.edu/its/docs/wireless/androidwireless.html
I connect to it just fine but am UNABLE to get to that device registration/login page.
This is NOT just for my university. ANY public network which requires me to accept an "agreement" before it lets me have internet access, my phone KILLS ITSELF and CANNOT pull up the agreement page but instead tells me there is no internet. I'm SURE its a software problem or something with settings but can't figure out just what it is. Help?
Just about the only networks I can connect to on Wi-Fi are home networks. It SUCKS.