Hi guys. My HTC HD2 won't open anymore. It gets stuck at the white opening screen. I download an official rom and when i try to flash it the upload gives error [262] all the time. it wont flash any rom and i stupidly erased my mobile center with the advice of a different post. Could u guys help me step by step on this. I am a big noob on these stuff. thank you.
the white opening screen normaly means an incompattible radio has been flashed, check the links in my sig for details instructions on flashing
ive downloaded the windows mobiel center but i cannot connect my phone to it somehow. i tried also in the boot mod. still doesnt work.
phone wont sync with mobile device center as i cannot get it open. it doesnt see it as connected.
Startup your phone in the 3 color screen. (hold volume down while powering on)
then you could connect your phone with USB to laptop/pc and flash an official rom to make things allright.
That's what worked for me when i had this issue!
Official rom wont flash. it always gives connection error when i try to update it. Error [262]
before flashing did you flash your HSPL? I think TMOUS devices use the HSPL2. When you boot your phone there should be 3 Letters follow by numbers in the bottom left. I know there is R(Radio)G(?)(D)(I believe this is your base rom number) 1. Make sure you have HSPL/2 installed then check your radio. From there report back
I did install HSPL before i tried to reinstall it now but it gives usb connection error.
power off your phone and turn it back on holding the volume down key. This should enter the bootloader mode Tri-Colored screen. From there plug it in via USB. Open "computer" and see if your phone is being read. If so flash a new radio for your device.
It reads as USB now but everytime i try to flash. it says the image file is corrupted and the phone restarts
Try downloading a different radio, or the same radio, extract the file into a new folder, Rename the extracted file to RUU_signed.nbh, add the CustomRUU to that folder and Re-flash.
nope it still gives error [270] image file is corrupt
you first were getting error 262 no? now you're getting a corrupt image file. Meaning your download is either stopping, or the mirror you're downloading from doesnt have the FULL download of the ROM/Radio. Try a different mirror or a different Radio/Rom and follow the steps i PMed you with.
again gives 262 error now. why is this happening :/ im doing all the right things
First thing: Check out and post the HSPL No. in the boot screen...
(digits and letters)
Then let´s go on with step two...
Related
Good Morning,
I have been flashing a few different roms to find one that suit my needs however I have come to a problem - When I run the RUU it finds the device starts to bootloader on the device then very very quickly the device brings up a grey screen which says something like no image file (happens so quickly hard to read) then goes back to the tri-colour boot loader.
The PC then keeps trying for another minute or two and then says its lost connection.
I have tried using the Manual Boot Loader on the phone and putting the image straight to the msd card and running boot loader by vol - + Power but still nothing works
The last image I tried was the LIA (Can't remember which version - its at home)
I am currently running HardSPL 1.56.OliNex
On the Bootloader it also says this if it helps:
BLAC100 32M
MicroP-Blackstone (LED) v6
Also tried a Hardreset and downloaded official rom from the HTC website :-(
Anyone got any ideas?
Thanks.
Max
max_carpenter said:
Good Morning,
I have been flashing a few different roms to find one that suit my needs however I have come to a problem - When I run the RUU it finds the device starts to bootloader on the device then very very quickly the device brings up a grey screen which says something like no image file (happens so quickly hard to read) then goes back to the tri-colour boot loader.
The PC then keeps trying for another minute or two and then says its lost connection.
I have tried using the Manual Boot Loader on the phone and putting the image straight to the msd card and running boot loader by vol - + Power but still nothing works
The last image I tried was the LIA (Can't remember which version - its at home)
I am currently running HardSPL 1.56.OliNex
On the Bootloader it also says this if it helps:
BLAC100 32M
MicroP-Blackstone (LED) v6
Also tried a Hardreset and downloaded official rom from the HTC website :-(
Anyone got any ideas?
Thanks.
Max
Click to expand...
Click to collapse
Ensure that you put the .nbh and ruu file into one folder with no other files. Make sure you have named the file correctly, i.e. blacimg.nbh
Thanks for your advice. Got the Offical HTC Rom flashing back now.
Strange why the RUU didn't work though been working fine.
Just another quick note while this HTC Rom is flashing it says:
Radio_v2
Bootloader
Splash1
os
Does this mean I need to put Hardspl back on to do more roms as it mentions bootloader?
Regards,
Max
max_carpenter said:
Thanks for your advice. Got the Offical HTC Rom flashing back now.
Strange why the RUU didn't work though been working fine.
Just another quick note while this HTC Rom is flashing it says:
Radio_v2
Bootloader
Splash1
os
Does this mean I need to put Hardspl back on to do more roms as it mentions bootloader?
Regards,
Max
Click to expand...
Click to collapse
If you SPL states SPL: 1.56.Olinex then you do not need to re-use HSPL unless you are flashing a rom based on pre 1.54
Ok it didn't change the SPL so thats still ok -
However I can no longer flash new images from my computer using the RUU?
When ever I try it connects enters bootloader but then says No Flash Image. I have checked on the computer I have the RUU tool and the blacimg.nbh but nada.
I have tried roms that were working before. If I copy the blacimg.nbh to the memory card and use vol down + Power it works fine.
anyone seen that before?
max_carpenter said:
Ok it didn't change the SPL so thats still ok -
However I can no longer flash new images from my computer using the RUU?
When ever I try it connects enters bootloader but then says No Flash Image. I have checked on the computer I have the RUU tool and the blacimg.nbh but nada.
I have tried roms that were working before. If I copy the blacimg.nbh to the memory card and use vol down + Power it works fine.
anyone seen that before?
Click to expand...
Click to collapse
So you can still flash from sd card, but not using usb cable and pc method. I am assuming you still get 'usb' at bottom of bootloader before you try flashing. I was goingf to suggest maybe your .nbh file was corrupt but you stated you tried using ones which where previously successful so it can't be that. Are both the nbh and ruu files in their own folder with no other files? Try using ruu I've attached. Do you get any error codes?
I will give that RUU a go later once I have played with this rom for a bit.
Yes the RUU and the .nbh are in a folder on my local drive on their own - No antivirus installed
The same .nbh file works via the flash memory,
However the USB text doesn't appear on the boot loader anymore. When I run the RUU from the PC with USB attached with ActiveSync it auto loads the bootloader perfectly but from there no usb and it flashes to the grey screen abotu no flash image then back to the bootloader with nothing at the bottom.
max_carpenter said:
I will give that RUU a go later once I have played with this rom for a bit.
Yes the RUU and the .nbh are in a folder on my local drive on their own - No antivirus installed
The same .nbh file works via the flash memory,
However the USB text doesn't appear on the boot loader anymore. When I run the RUU from the PC with USB attached with ActiveSync it auto loads the bootloader perfectly but from there no usb and it flashes to the grey screen abotu no flash image then back to the bootloader with nothing at the bottom.
Click to expand...
Click to collapse
ok, reason flash fails is more than likely due to 'usb' not appearing at bottom of bootloader.
Various reasons for this:
First check that 'allow usb connections' is enabled in activesync connection settings and then see if 'usb' appears
Secondly, update usb drivers
Ok thanks I will note that although I think I have found a rom I am very happy with. So far seems to do everything I want and very stable so will see how it goes.
Just encase anyone is intrested its: Xnor 6.5 V1.4
I have yet to go through everything but so far so good....
same problem
hi I have same problem as OP.. did this get resolved??
dunno if this will help you but basically to flash it via usb the pc detects the phone as something else (not active sync or mobile center or whatever its called now).
so you need to have the drivers installed for that.
if you cancelled the driver screen or something the first time, then it will still be on your system as a nonfunctioning device the easiest thing to do is uninstall it from device manager.
then install the drivers as mentioned above and plug the phone in again in bootloader mode and wait...
it will take longer than usual because its the first time the driver is being loaded. then i think 'usb' will appear...
i had a problem like that after i reformatted my pc but this was ages ago
HTC HD2 now has hspl on it tried to update rom i start the image update gets about half way, then syas
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
Update terminate
UPDATE FAIL
When you enter Bootloader mode, just to be sure, what is shown for the SPL version?
You need HSPL 1.42.0000 on your device in order to flash successfully.
You must also flash a Radio version next and not a custom ROM version.
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it here)
don't instal from sd card.why would you?
instal hspl, flash rom/radio using usb,job done.
Mastoid said:
You need HSPL 1.42.0000 on your device in order to flash successfully.
.
Click to expand...
Click to collapse
just to un confuse that statement, you need it too say in boot loader
spl 1.42.HSPL
and NOT
spl 1.42.0000
this is what im stuck with i cant boot the phone, to get it to sync with the pc
What error code do you receive when it fails to flash?
Try the following:
1. Download orginal ROM from HTC.com
2. Remove HTC Battery
3. Remove SD-Card
3. Connect the Phone via USB to Computer
4. Start-up the phone in Bootloader mode wuth the Tree-color screen
5. If everything is right, in the bottom you will see USB
6. Start-up the update on your computer (ROM you've downloaded from htc.com)
7. Run the Update
8. Your phone should now boot after it installs
9. Place the battery and SD-Card back in the Phone
If that works, first flash to a Radio version from the link specified above (in post #2), and then you can flash to a custom ROM.
trev666 said:
this is what im stuck with i cant boot the phone, to get it to sync with the pc
Click to expand...
Click to collapse
No need to sync with the pc, provided when connected to the pc it shows usb at the bottom of that screen you can still flash.
just got home, on my pc just managed to change my radio got to be something wrong with the girlfriends laptop keep you posted and thank you so much for helping me folks
guys i love you so much you just saved my life thank you so much all sorted now. next time i will be more carefull
So....i had read the thread and installed HSPL on my phone before i attempted to used a cooked rom, having tried to install my first one i find now i have the 'white triangle of death with upside down exclamation mark'.
I am on T-Mobile in the UK and i do not want to brick this beyond all repair..what is the procedure i should do now to get it working..i beleive i need to format a SD card to fat32 but which rom do i put on it and then what is the button press sequence..i have no connection via active sync anymore.
phone off - hold "volume down" - tap power whilst still holding volume down - phone will boot to bootloader (three stripes)
what does it say next to spl?
if
1.42.0000 then hspl isn't installed. what rom did you flash and how?
if says 1.42.HSPL then hspl is installed, plug in usb, wait for "serial" to become "usb" and flash your rom again from usb.
Thanks...
1.42.HSPL is what it says, it also says lower down 'upgrade ROM code error please try again' which i did do several times through the .exe on the rom i tried to upgrade to which i believe was TOUCH_X_TREME_21895_1_2_36_47, im not to sure whether the rom is compatible for me or even what i done wrong, i was relying on the fact that i had installed HSPL prior to trying to flash the new rom, i can confirm that the phone changes to 'usb' when i plug it in on the tri colour screen...so when you say try to flash the rom again what exact method do i use..when i tried the first time i just run the .exe file in the rom folder and followed the prompts
EDIT: having just followed what you said...i run the rom .exe file and followed through recovery and it says error 'error 302 update error'...what if the rom i am flashing is NOT compatible.
Why don't you first try to flash back a stock rom that you can download from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html ?
Choose preferably a 1.48 rom.
Anyway, you'd better read the "flashing for noobs" thread in ROM dev forum before you go and do something even worse. You're probably trying to flash a corrupt file or something alike.
get the T-Mobile ROM from HTCs website, boot into the bootloader and connect and flash the stock ROM...that should at least get you working again
yea as above.sounds like a bad download or something. try a different rom or re download.
be aware the rom you are flashing needs a certain radio, so when it does flash it still won't boot till you flash the correct radio.(it's all in thefirst posts of the rom thread)
you have hspl installed so as long as you only flash by usb you are safe. just boot to bootloader, run the instal from the pc, phone will flash
EddyOS said:
get the T-Mobile ROM from HTCs website, boot into the bootloader and connect and flash the stock ROM...that should at least get you working again
Click to expand...
Click to collapse
Have done this..still not flashing, keeps giving update error, as i said..i have no active sync connection and it states that is needed ?...so how do i flash the rom ? also when you asked me to go to the tri colour screen and read off the HSPL part, on the green section it says 'upgrade ROM code error please try again'..is this normal in this state
Why am i getting this error when i try to flash it via usb...comuter still recognises phone but active sync does not connect to it so i am assuming this is causing the error ?
So when you go into the bootloader and plug in the USB does it say USB on the phone screen? If so, you also need to run the updater as an administrator. If this doesn't work, try another PC. If that doesn't work then you may very well have bricked it.
Also, are you using ActiveSync or WMDC?
EddyOS said:
So when you go into the bootloader and plug in the USB does it say USB on the phone screen? If so, you also need to run the updater as an administrator. If this doesn't work, try another PC. If that doesn't work then you may very well have bricked it.
Also, are you using ActiveSync or WMDC?
Click to expand...
Click to collapse
Yes it changes to USB when i plug it in, i am using WMDC but when i plug the phone in it does not connect anymore, i have tried running as admin but it makes no difference, i keep getting error 302.
Correct me if i am wrong, i thought the idea of installing HSPL would keep me safe from bricking the phone, i think all i initially done was flash an incorrect rom, ill try it on my laptop but that has not been in contact with the phone yet
What OS is on your laptop? if it's Windows 7 just plug in your phone and it will automatically WMDC so you don't need to install it first
Laptop done the trick !..seems to be doing the job now...dont know what the hell thats all about...
Would be helpful if knew what radio i had on it...and do i install rom first, then install radio ?
ActiveSync or WDMC wont recognise the device as the phone has not fully booted up.
With the phone in boot-loader mode and connected by USB, then run the ROM installation program. Ignore the fact that it says you must be ActiveSynced. Just tick the box and go into the next page.
As been said already, make sure you install the correct RADIO rom for the customised ROM. Once that is done, then you can install the ROM.
The best ROMs to download are ZIP'd or RAR'd ones, as they have a check that they have not been corrupted when uploaded or downloaded.
Well this is highly weird !!...i restored the Tmo dump from htc website but i now have the rom on there that i was trying to install previously before i bricked it...Touch X treme
What radio are you trying to flash? Read this and use this to flash the phone with the radio needed for your ROM choice:
http://forum.xda-developers.com/showthread.php?t=644781
Once done, try flashing the phone again (I'd make sure HSPL is on the phone too)
fred_up said:
ActiveSync or WDMC wont recognise the device as the phone has not fully booted up.
With the phone in boot-loader mode and connected by USB, then run the ROM installation program. Ignore the fact that it says you must be ActiveSynced. Just tick the box and go into the next page.
As been said already, make sure you install the correct RADIO rom for the customised ROM. Once that is done, then you can install the ROM.
The best ROMs to download are ZIP'd or RAR'd ones, as they have a check that they have not been corrupted when uploaded or downloaded.
Click to expand...
Click to collapse
So find out what radio i need before flashing, what if the radio i need to flash is not for the currant rom i am using...and am i right to say that some of these roms i cant use as they are not for the UK ?
All radios can be used, you can get them on their own and use with that link I posted before. going by the Touch X thread it says you need a 2.07 or 2.08 radio so get one of them and flash that first before flashing the ROM
I understand that better now...still not sure what went wrong there, from the laptop i thought and still do that i was flashing the stock rom for tmo from the htc website to restore the phone...but when it started up i was shocked to see the splash screen for the Xtreme rom..maybe i flashed that ?? if so why did it work this time..bad flash before ? and i have certainly not installed a radio myself...well thaks for your help anyway..the phone is up and running again and i will make sure HSPL is still there before i try my next rom
Likely bad flash - glad you're sortred now though. I always do the task29 with the radio nI want to use before flashing a ROM now to make sure the memory is clear...
hi sir iam new in this forum plz help me my htc hd2 shows on screen software update failed it cannot connected to active sync but connected to my pc .i download its hspl and rom butt next what can i do plz help me.
Try to get it into bootloader by taking out your battery, putting it back in, and then holding the volume down button while pressing the pwr/end key.
You have to hold the vol- key while the phone starts up, then you should see a screen with a few colores bars and some info.
EXACTLY what all info is displayed in your tri-color (bootloader) screen?
i tried the same. phone is in boot loader mode butt cannot connect to hspl2 it gives error plz help me .what can i do next its spl is 2.08.0000 8G XE
Don't bother trying to flash it via ActiveSync or Windows Mobile Device Center on your computer. If it has already failed, it will likely fail again.
Get a class 2, 4gb sd card, and erase all files and format it (FAT32).
Get a ROM that you are CERTAIN is compatible with your 1024 Leo (TMo-US) and inside the zip file you will find a file with the extension .nbh
Rename it to LEOIMG.nbh and transfer the file to your freshly formatted 4gb class2 card. (Not inside any folders, just on the card)
Take the battery out of your phone, then place the sd card into the phone.
Turn the phone on while holding the vol- button, to enter bootloader, and your phone will detect the LEOIMG.nbh file after a few seconds and ask you if you want to update your software.
Your phone will tell you to press a button to start the update. Press the button. Wait for the update to complete. The phone may reboot and flash the update again, I've had mine do that, it's okay, just let it go.
When everything is done, it should either turn off by its self, or boot up normally by its self.
If the update fails the first time, try it again.
Turn it off, take out the sd card, and boot it up normally.
If you follow these steps exactly, then you will not fail.
If you do follow thes steps exactly and the phone doesn't get all the way thru the update process, and fails, then it's one of two things:
1. You tried to flash an incompatible ROM
2. There's something wrong with the hardware of your phone, or your bootloader is corrupted.
Good luck and happy flashing!!!!!
bro thank u for give me complete detail for that butt i am confused that where i find compatibale rom.plz if u up load for me that rom and if possible how to find the file LEOIMG.nbh.plz sorry for my bad english. my phone spl is 2.08.000.and also that software windows Mobile Device Center.
usmancheema said:
bro thank u for give me complete detail for that butt i am confused that where i find compatibale rom.plz if u up load for me that rom and if possible how to find the file LEOIMG.nbh.plz sorry for my bad english. my phone spl is 2.08.000.and also that software windows Mobile Device Center.
Click to expand...
Click to collapse
OK since your SPL is 2.08, you will first need to install HSPL to your phone through your computer.
Don't worry, HSPL never fails over the computer , as ROMs sometimes do.
http://forum.xda-developers.com/attachment.php?attachmentid=347299&d=1277158888
Just connect your phone through Windows Mobile Device Center and run the HSPL program (right-click it and Run As Administrator), following the instructions the program gives you. When asked to choose an SPL, choose 2.08 HSPL.
Allow the program to work its magic, and when it is finished, go into bootloader and confirm manually that you have HSPL by looking on the bootloader screen for the name Cotulla, and it should say 2.08HSPL
Then I would suggest any of the ROMs here:
http://hotfile.com/list/588162/580b43d
Personally I would go with the Dinik one, the icons and everything are really nice looking.
Just follow my previous instructions to flash it via sd card, and you'll be good to go.
After that, go learn about putting some Android builds on your sd card in the HD2 forum, Android subfora.
Lots of fun to be had there.
Hope it all works well for you, don't hesitate to ask more ?'s if you're not sure about something
Everytime I turn on my phone, it goes straight into bootloader mode. I don't know what to do. I've been trying to google for the past hour or so, and no luck. Can anybody help?
Could be that your vol down button is stuck, try pressing and releasing quickly a few times ...just a thought!
PS. Your phone is not bricked if you can get to boot loader!!!
i tried that, and it didnt work. any other ideas?
can anyone please help?
Maby you don't have an OS. So try to flash a stock rom.
Sorry for bad english.
i tried that, but it either loses connection or it will say something about, how the the version of the o.s doesnt work for my phone. also on the phone itself, when it tries to download the rom, where a htc image is normally there, it isnt.
i have no idea what to do
It would be helpful to understand what you were running on your phone before the problem occurred?
The Bootloader you are seeing - I assume it is the hacked Cotulla one?
If you connect your phone to a PC does the bootloader screen show "USB" rather than serial?
If you have Cotulla bootloader and USB connection to PC, I'd start again with a clean install....not sure what you were using...but Typhoon is nice and Stable
http://forum.xda-developers.com/showthread.php?t=933951
It has a "clean installation" guide that you can follow....
http://flashmirrors.com/files/ytjzury5kvx9p91/Clean Installation.pdf
HTH.
K
I was trying to reinstall a stock gingerbread o.s on the phone, but something happened, and it wouldn't allow me to. So i just wanted to reinstall stock tmobile rom, and install android after that.
Yes i have cotulla bootloader, and whenever the phone starts up, it says serial, but it ill change to usb when i plug it in.
i couldnt open the pdf file.
mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
If you are getting errors while flashing the stock ROM, as in windows mobile, then 99% of the time you have bad NAND memory and the phone needs to be jtaged or the motherboard needs to be replaced. Ive experienced a lot of these similiar threads over on PPCGeeks with the HTC Touch Pro 2
whenever the image file tries to update through bootloader i get an error/update image fail due to the radio i think. it says its spl 2.08 hspl, i tried uninstalling hspl but that didnt work. what could be the problem? or am i pretty much out of luck?
mh48 said:
i couldnt open the pdf file.
Click to expand...
Click to collapse
Those mirrors do seem broken.
Well this thread gives step by step instructions.
http://forum.xda-developers.com/showthread.php?p=11097380
you have HSPL, so you need to task29, MAGLDR, CWM and then a ROM.....it'll be interesting to see if you get anywhere....
Suggest following it step by step and seeing what happens before we write off your phone!
im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible
mh48 said:
im not able to install magldr or a new rom, it either loses connection, or says it isnt compatible
Click to expand...
Click to collapse
Well if you have Cotulla HSPL, and USB shown on that screen, and are connected to your PC and Task29 is not running then I'm afraid I'm out of knowledge....
Sorry.
so i found that i have a ruunbh error, what do i have to do in order to fix this?
with ruunbh I suggest you go back and flash a stock WM rom.
That has worked for some.
If that gets you back running (at winmo 6.5) then you need to start the Android process again....
......By starting with HSPL and moving on through task29, radio, magldr, clockworkmod and a android rom.
going back to winmo is described here:
http://forum.xda-developers.com/showthread.php?t=935145&highlight=stock+rom
Let's see if you can go back to winmo first!
it keeps giving me an update error, when i try to install a custom wm rom and official rom any other suggestions?
So of the steps below....where and what is the update error?
--------------------------
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to LEOIMG.nbh
Copy LEOIMG.nbh into your SD card root directory which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
im using tmobile u.s version
You really like being brief don't you.