Hello,
my htc magic is bricked
i am new to this so please help me...
here is an video of my magic and what happends....
youtube.com/watch?v=bc9Sg6WNW20
thank you all in advance !!!!
edit : somethimes when press power on it goes white, sometimes green , red or grey but with colors and some stripes and like fading...
and sometimes just white on power up....
hey
are u able to get into fastboot? using (powerkey + back at the same time to turn on phone)
In the video is shown what i get when press power key + back
i havent wrote that i can also get blue led mode.
i think that i get in fastboot for few seconds and then it all fades.
Sounds like an expensive paper wieght
i am afraid so...i will send it to service to try and fix it with jtag
Related
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
help me X2
hi all fri
i had one sony x2 ,but have some problem !can you tell me how to enter undate mode !and X2 chinese rom! thanks
do you press and HOLD both buttons till the desired screen appears? Should not release Power button before the screen emerges..
Yes I did, It's just loads up as normal, I have the xperia x1 so I'm not new to this devices, anyone experienced this before?
Are you sure that you are doing it exactly like this:
1. Remove and re-insert battery.
2. Press AND HOLD the volume down button.
3. Press AND HOLD the power button at the same time.
Hold the two buttons (and no other buttons) until logo on white background appears.
The order is important, first the volume down button - keep pressed, then the power button - keep both pressed.
The most important thing that many people miss is...
You must NOT have the USB cable plugged in when you do this. Only plug the phone in after the white screen appears.
This is not my first xperia as I still have the x1, so I do know what I'm doing, the phone boots up as normal (sony ericsson logo with the 'black' background) unlike the x1 with the tricolor screen. Is there anyother way to enter the bootloader or reset the whole ROM? someone please help as I can't update my phone and spony ericssonwon't do anything about it because it hasn't been officially released in the UK :S
i have the same issue tryed every thing (volume down + power =nothing. volume down + power +soft reset button= nothing. look in the registry found nothing relevant to bootloader )i think bootloder got messed up or something. is there a folder or something containing the bootloder
adidas35th said:
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
Click to expand...
Click to collapse
Exactly the same problem
same here, very frustrated, need my phone back to factory settings! any1 help please???
It's important that you normally turn off the phone before getting out the battery or it will reboot normally when the battery is inserted.
X2 DEAD
I also have the same problem as my device does not turn on nor k is functioning BOOTLOADER MODE.
only once beats vibrating k after the computer sees an unknown device.
I left my phone in few mobile services, nobody did any good to it - same problem still left. Last chance will be SE service.
do u find solution to repair your x2
do u find solution to repair your x2
No.. my phone few weeks ago went dead (after installing custom cab's)..now its only peace of trash
Giz1984 said:
same here, very frustrated, need my phone back to factory settings! any1 help please???
Click to expand...
Click to collapse
To get back into factory-defaults, then use the Phone reset found under Settings->System. That will re-install everything.
Hi
Just to bring you up to speed my HD2 is a completely stock as it comes t-mobile (uk) handset.
Today after the phone froze with a black screen i pressed the little red reset button on the rear of the handset, after i did that and now every time i press the button or pull the battery and turn on all i get is a plain bright white screen.
i've done the reset where you hold the vol up and down and also forced it into boot mode by holding the vol down plugging the usb cable in and running the htc rom update.
So any ideas on how i can get the handset working as i'm in great need for it.
I'm going to post a video clip to show it better as soon as i've recored it.
Thanks Dave
youtube.com/watch?v=QS02ySr2Kic
video clip
If you can get into the boot loader then flash a new ROM into it... Or look for the Task29 Update Manager here in the forums so it formats the HD2 then Flash it
Hi, I have a htc blackstone and after flash a few rom i tryed to come back at the original rom no brand ita and spl 1.14 , but now i can't flash no other rom, it stops at 0% and from the microsd don't starts, can someone please help me?
(sorry for bad english)
Hi
What you can do is a hard reset: open up the backcover from you phone you will see underneath the SDCard a red hole that is the reset-button at first you have to press the VOLUME UP AND DOWN BUTTEN at the same time than press the reset-button with a pensil or similar I know it is very awkward you need a lots finger you can also press the power button,be patient, ok normally after the phone starts you will see a 3 COLORED SCREEN wen you see the screen stop pressing the volume button the screen will tell you what you have to do,to erase all you settings and you will be back to your previous ROM setting.
lumisab said:
Hi
What you can do is a hard reset: open up the backcover from you phone you will see underneath the SDCard a red hole that is the reset-button at first you have to press the VOLUME UP AND DOWN BUTTEN at the same time than press the reset-button with a pensil or similar I know it is very awkward you need a lots finger you can also press the power button,be patient, ok normally after the phone starts you will see a 3 COLORED SCREEN wen you see the screen stop pressing the volume button the screen will tell you what you have to do,to erase all you settings and you will be back to your previous ROM setting.
Click to expand...
Click to collapse
Hello I solved the problem reinstall the original ROM thanks anyway
i cant lock my phones because when i press the hang button (red one) it just wont came back the screen stays black!! the buttons light came ang gooo
wath can i dooooo :'(
blackconvers7 said:
i cant lock my phones because when i press the hang button (red one) it just wont came back the screen stays black!! the buttons light came ang gooo
wath can i dooooo :'(
Click to expand...
Click to collapse
wait for a decent 2.3 port,
the one you're using is buggy man, there's a known BSOD issue.
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
I don't think there should be a 'HTC' screen when you're booting into bootloader? I'm not sure, but just try holding down both the power button and the volume down button, as I think people have been able to restart the process after their phone has run out of battery or something similar. Hopefully everything should be OK once you've managed to access the bootloader.
Oh, and I don't mean to be rude, but use a better PC next time
phone wont go into bootloader , phone just turn on NORMALLY , but while there is no system at all on his memory he just stuck at HTC (green) on white background !
im suspecting that my VOLUME DOWN button is broken ?
Have you tried the back key?
power (end call) + back key ?
If you have magldr installed it should bring you to magldr menu which would point towards faulty vol down button ....
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
If I remembered correctly, some of the people mentioned that HD2 is quite difficult to brick. I think that you could still try to work with your phone unless you still suspect that you have a faulty volume down button. I noticed in your statement in Step 2 coloured red that you press the end key once. I haven't flash in a while but I think you should hold the end key with the volume down button until you get into bootloader mode (screen with tri colour). Don't just press the key once. I hope this helps.
lummujaj said:
... tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc ...
Click to expand...
Click to collapse
I am sorry, but I think you may have bricked your device.
Sure thing, the european HD2 is quite difficult to brick. But your PC had frozen while you were in the middle of flashing. (right?)
It is like pulling out the USB cable while flashing. You can try flashing from sdcard. Are you sure you are not able to go into bootloader?
To get to bootloader press and hold vol down button and then press the power (end call) button. I do a lot of flashing lol
lol...i just noticed the threadstarter's point of saying he pressed the power key "once". So i thought that was a mistake. Could be surely from the faulty volume button. Don't see any reply yet from him.