Well i have a Samsung Vibrant rooted with OCLF and running Launcher Pro. I tried to change my boot screen which i read up on here before doing. I read on this forum theres is 2 ways to actually do it, which is using the command on your pc which im not too good with codes so i tried the 2nd option which is to copy and paste using the Root Explorer. So i copied the bootanimation.zip from SD card while on mount r/w and paste it to system/media and then reboot. I still have the stock boot up not sure if i did something wrong, this is my 1st android phone which i like way better than my Icrap so any help will be appreciated.
borikua954 said:
Well i have a Samsung Vibrant rooted with OCLF and running Launcher Pro. I tried to change my boot screen which i read up on here before doing. I read on this forum theres is 2 ways to actually do it, which is using the command on your pc which im not too good with codes so i tried the 2nd option which is to copy and paste using the Root Explorer. So i copied the bootanimation.zip from SD card while on mount r/w and paste it to system/media and then reboot. I still have the stock boot up not sure if i did something wrong, this is my 1st android phone which i like way better than my Icrap so any help will be appreciated.
Click to expand...
Click to collapse
Why dont you give this a try
USE THE GALAXY I9000 BOOTUP / SHUTDOWN ANIMATIONS & SOUND
rko did an awesome job with these flashable bootup/shutdown animations (place them on the /sdcard (internal memory) NOT sdcard/sd (external). Be sure and thank him for his work!
http://forum.xda-developers.com/showpost.php?p=7663822&postcount=38
Thanks to s15274n
i tired it it doesnt work either comes up with error code
You have to have a rom that has a hacked kernel that allows for support of bootanimation.zip the stock vibrant rom does not have this ability (Thankyou Samsung), so simply putting the file in the correct folder will do nothing if you don't have the kernel that utilizes it. Currently there are 2 roms that will work with this:
Obsidian V2 - JK2 Official Froyo Based 2.2
or
Froyo Macnut R10
you put the .zip files in /system/media which is NOT the right way of doing it
extract the zip file anywhere on your desktop and copy the bootsamsung.qmg into your internal sdcard.
then run root explorer on your phone, copy the same .qmg file from your sdcard into /system/media folder
motoyola said:
you put the .zip files in /system/media which is NOT the right way of doing it
extract the zip file anywhere on your desktop and copy the bootsamsung.qmg into your internal sdcard.
then run root explorer on your phone, copy the same .qmg file from your sdcard into /system/media folder
Click to expand...
Click to collapse
A bootanimation.zip is a zip with a series of images in it, there is no qmg in it. The OP was not asking about the qmg I don't think. He wants to be able to use his own bootscreens which cannot be done with qmg, only with bootanimation.zip and a hacked kernel.
the3dman said:
A bootanimation.zip is a zip with a series of images in it, there is no qmg in it. The OP was not asking about the qmg I don't think. He wants to be able to use his own bootscreens which cannot be done with qmg, only with bootanimation.zip and a hacked kernel.
Click to expand...
Click to collapse
obviously you didnt read what op said:
so i tried the 2nd option which is to copy and paste using the Root Explorer. So i copied the bootanimation.zip from SD card while on mount r/w and paste it to system/media and then reboot
Click to expand...
Click to collapse
meaning hes dropping the whole zip file into /system/media through root explorer
i just told him the proper way of doing it as it was discussed here
the only mistake i did was use the "bootanimation.zip" as reference
since OP didnt even mention where he got the bootanimation.zip and i assumed things
im sorry about the confusion
ok sorry for the confusion and i thank you both for the responses.Lets see if i can explain it a little better.(It wont let me post a link but i found it here on XDA which is the THC boot up) the bootanimation.zip file i was trying to use which does not have the qmg for me to extract so i tried to put in system/media which did not work. Then i tried chichu_9 boot up screen which he recommended and did exactly as motoyola did which i extracted the qmg file and put in sd card (not external) then copy/paste into system/media which replaced the stock qmg file for the vibrant then i reboot and still stuck with the stock boot up screen. I am currently running Eugenes leaked 2.2 rom which works pretty good so far just cannot change boot screens for some reason so if i missed something or did something incorrect pls feel free to correct me and thanks in advance.....
hello ,
Am using galaxy ace and i want to change the default app icons [like My files gallery...etc].I downloaded a copy of my firmware and i was able to extract system.rfs from the md5 file which contained the apk for the music player...etc using 7z,i changed the icons to my custom icons...now I am not able to move the system.rfs to the MD5 file using 7z...does any one know anyway of doing this
P.S Does editing the files do harm when flashing...will this be succesfull?
If you edit rfs files on pc then its corrupted
So make changes in the apk and paste it in /system/app
You can make a new rfs fine too but that needs root and and the need to know which partition is mapped to /system
so can i just place the apk directly on phone through root explorer...but i tried that with an system app [you tube] i dont use ,i changed the icon and placed the apk using root explorer...after that it vanished..i tried rebooting and installing the apk....but it wont install...
I'm getting an error when I try to install a .zip file through CWM recovery.
I get an error saying : E: Can't Open /sdcard/x (No such file or directory exists).
I've looked around and have learned that my best bet is to format my SD card. I can do that just fine, but I don't want to lose my data. I'm not flashing a ROM, it's just a custom lockscreen clock. If I format, I'll have to redo everything and lose all my data, apps, and system files (I'm running CM7 off of my SD card). But I need that for my zip to even be worth it.
I'm running a nightly build. Is there any possibility/plausibility that this could be a ROM-specific bug?
Is there any advice as to what I should do?
Thanks in advance.
SacTappingUni said:
I'm getting an error when I try to install a .zip file through CWM recovery.
I get an error saying : E: Can't Open /sdcard/x (No such file or directory exists).
I've looked around and have learned that my best bet is to format my SD card. I can do that just fine, but I don't want to lose my data. I'm not flashing a ROM, it's just a custom lockscreen clock. If I format, I'll have to redo everything and lose all my data, apps, and system files (I'm running CM7 off of my SD card). But I need that for my zip to even be worth it.
I'm running a nightly build. Is there any possibility/plausibility that this could be a ROM-specific bug?
Is there any advice as to what I should do?
Thanks in advance.
Click to expand...
Click to collapse
If you are running CM7 on SD you do not flash zips to it with ordinary CWM. Ordinary CWM will flash things to emmc. But maybe that is what you are trying to do. You do not say what you have on emmc.
If you want to flash the zip to the SD installation, make sure the zip file starts with update- and put it in the boot partition just like you do for roms. Then boot to SD recovery and the script will install it to SD.
An alternate way to flash things to SD installed CM7 is to use a special CWM modified for use on SD installs. You can read about and get it by looking at my tips thread linked in my signature. Item B5.
If you want to flash to emmc, make sure you are using an ordinary SD to put the zip on. Ordinary CWM always looks for partition one on the sd for the zip file. On your CM7 SD, the file is on partition 4 so CWM cannot find it.
So I'm trying to flash a new clock for my NC's unlock screen. The zip is called HoneyCombClock.zip. So do I just rename it to update.zip? That's not going to mess anything up?
Also yes, I booted into boot menu and selected emmc recovery. I thought that I needed to do CWM recovery.
I'll try the proposed method when I get a confirmation that it's not going to mess up my NC.
SacTappingUni said:
So I'm trying to flash a new clock for my NC's unlock screen. The zip is called HoneyCombClock.zip. So do I just rename it to update.zip? That's not going to mess anything up?
Also yes, I booted into boot menu and selected emmc recovery. I thought that I needed to do CWM recovery.
I'll try the proposed method when I get a confirmation that it's not going to mess up my NC.
Click to expand...
Click to collapse
You need to find out if it is a flashable zip... or if it is an app that has been zipped... I'm betting on the latter.
SacTappingUni said:
So I'm trying to flash a new clock for my NC's unlock screen. The zip is called HoneyCombClock.zip. So do I just rename it to update.zip? That's not going to mess anything up?
Also yes, I booted into boot menu and selected emmc recovery. I thought that I needed to do CWM recovery.
I'll try the proposed method when I get a confirmation that it's not going to mess up my NC.
Click to expand...
Click to collapse
If it is a flashable zip like Dizzy pointed out, you should rename to update-HoneyCombClock.zip. But I agree with Dizzy that it is probably a zipped apk file, not a flashable zip. Try looking at it with a zip program and see what you get.
It is indeed a flashable zip. I extracted it to make sure.
Also, I'm curious as to what you (leapinlar) meant when you instructed me to put the zip in the boot partition. From what I understand, that's the root of the SD card, right? Or has it changed?
SacTappingUni said:
It is indeed a flashable zip. I extracted it to make sure.
Also, I'm curious as to what you (leapinlar) meant when you instructed me to put the zip in the boot partition. From what I understand, that's the root of the SD card, right? Or has it changed?
Click to expand...
Click to collapse
Yes, it is what shows up on your PC when you take the card out of the nook and put it in the PC. Copy the zip there, rename it like I suggested above, put back in nook. When booting hold the n key until the boot menu comes up. Select SD and recovery and finish booting. The recovery script will install the zip.
I'm doing it and I'm not getting any errors, but when I boot into recovery, it runs through and shuts down without installing the zip. I don't understand what I could be doing wrong.
SacTappingUni said:
I'm doing it and I'm not getting any errors, but when I boot into recovery, it runs through and shuts down without installing the zip. I don't understand what I could be doing wrong.
Click to expand...
Click to collapse
And you renamed it like I said with update- on the front? (Don't forget the dash and no spaces.)
The file name is "update-HoneyCombClock". That should work right?
Sorry about these extended questions.
SacTappingUni said:
The file name is "update-HoneyCombClock". That should work right?
Sorry about these extended questions.
Click to expand...
Click to collapse
and .zip at the end?
It's automatically recognized as a zip file. If I put .zip at the end, it will show up on my tablet as "update-HoneyCombClock.zip.zip" Nevertheless, I'll try it and see what I get. I'll laugh if it works.
SacTappingUni said:
It's automatically recognized as a zip file. If I put .zip at the end, it will show up on my tablet as "update-HoneyCombClock.zip.zip" Nevertheless, I'll try it and see what I get. I'll laugh if it works.
Click to expand...
Click to collapse
Even if you get it flashing with your SD setup... it may not work if it requires honeycomb and you're running gingerbread.
It's meant for cm7. Here's a link to the thread I got the zip from: http://forum.xda-developers.com/showthread.php?t=959602
SacTappingUni said:
It's automatically recognized as a zip file. If I put .zip at the end, it will show up on my tablet as "update-HoneyCombClock.zip.zip" Nevertheless, I'll try it and see what I get. I'll laugh if it works.
Click to expand...
Click to collapse
What does the script say when it boots to SD recovery? Does it say install zip not found? And when you take it back out and look at it in the PC, is it still there? If it installed, the script will remove it. I know you can have your PC set to not show known extensions so it looks like it is missing. Temporarily disable that so you can really see the name. The script requires that it be named precisely, update- at the beginning, .zip at the end and no spaces.
The script doesn't mention any .zip installation. The zip file stays on my sd card root after recovery.
I just set my computer to show extensions. I'll retry the installation and make sure that every detail is perfect.
I remember doing something similar when I flashed a nightly on my nook. It was a .zip file. It wasn't flashing, so I looked around and got the impression that it would only instal if it had "update-" at the beginning. So I renamed it and it installed. I don't know what's up with my NC now. Is there any possibility that this could be a bug with the nightly? Or are installations not affected by ROM's.
SacTappingUni said:
The script doesn't mention any .zip installation. The zip file stays on my sd card root after recovery.
I just set my computer to show extensions. I'll retry the installation and make sure that every detail is perfect.
I remember doing something similar when I flashed a nightly on my nook. It was a .zip file. It wasn't flashing, so I looked around and got the impression that it would only instal if it had "update-" at the beginning. So I renamed it and it installed. I don't know what's up with my NC now. Is there any possibility that this could be a bug with the nightly? Or are installations not affected by ROM's.
Click to expand...
Click to collapse
No the existing rom will make no difference. It could be the zip itself. It has to be structured like a rom zip. It needs a /system directory with the files you want to flash. And it needs a META-INF folder with the script file buried in it. Where did you get the zip? Maybe I could look at it for you.
EDIT: I just downloaded and looked at it. It is just adding a single font to your /fonts folder. Nothing else. You can do that manually with root explorer. Just extract the font from the zip and copy to /system/fonts.
I got the zip from here: http://forum.xda-developers.com/showthread.php?t=959602
The clock can be flashed on any device with the following zip in recovery just like before.
http://www.mediafire.com/?b6xpw0pda671ujm
Click to expand...
Click to collapse
The zip has a font file and a meta-inf folder.
Look at my edit above
I replaced the file, but now I'm in an infinite bootloop.It just keeps doing the skateboarding android animation. Please tell me this isn't a problem with permissions. I don't know if I can even edit permissions now.
Im trying to get the glazeddonut rom into the nexus 7...I copy it to my download directory...in the file itself it contains a boot.img as well as two
subdirectories...i copy over the entire zip file....I then go into a program rom manager and clockworkmod recovery is flashed...then I go to install rom from sd card my zip file located in the download directory. When i chose that file all i see are two subfolder META-INF and system/
at this point how do i install the rom ...sorry if its a dumb question..im sure its something simple im just not seeing....
Hi I created a bootanimation and want to make it flashable. I followed tutorials from the net and xda. I got two files META-INF and system.
I put my bootanimation.zip in system/media. That's all. I didn't touch META-INF .
After flashing the zip in cwm, it says Installation aborted . Need Help please...
thats because the flashable zip wasnt for your phone
status 0 - wrong update binary
status 6 - wrong update script
here is my template for you
simply download it
open it in winrar (or if using phone just unzip everything)
open the system foler
you will notice a framework folder that is currently empty
you can leave this folder as it is
just create folders to where you want to flash the file to
for example your bootanimation.zip create the following
in the system folder create a folder called media
in the media folder place your bootanimation.zip
the same is true for any other files you want to flash
if you want to flash a file to system/framework just put a file in that folder
if you want to flash a file to system/app just create a folder called app in the system folder and put what you want to flash there
if on winrar you just have to open the zip and right click and create a folder - no need to unzip everything
if on phone and you have unzipped everything just zip everything back up when done
flashable zip template can be download from here
if you are using stock rom you need to enable custom boot animations first using the custom boot enabler zip
(if you already have a custom boot animation and bootanimation.zip working in a custom rom then you dont need to do this)
Ovafloa_X said:
Hi I created a bootanimation and want to make it flashable. I followed tutorials from the net and xda. I got two files META-INF and system.
I put my bootanimation.zip in system/media. That's all. I didn't touch META-INF .
After flashing the zip in cwm, it says Installation aborted . Need Help please...
Click to expand...
Click to collapse
If just a bootanimanion, push using root browser only
Or using a another flashable bootanimation file and the replace the bootanimation.zip with yours
I attch it . Credits to its maker
works perfectly! thanks