Related
Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
If you push the hang off button for more than 10seconds, it will be locked
No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.
Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?
The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.
avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.
I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave
chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???
davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.
Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
I would say not. There appears to be no power to these lower buttons while in standby, so no software could work?
Kev
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button?!
Click to expand...
Click to collapse
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Im also afraid for that power button... used it a lot on my diamond so it got bricked, its so gentle... Im using it as much as little possible now on mine HD for that reason.
I have s2u2 unlock on stylus out, so I pull out the stylus, the HD comes on and unlocks. It's so simple.
gadgetuk437 said:
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Click to expand...
Click to collapse
gadgetuk437
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Click to expand...
Click to collapse
That's not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
gadgetwizard said:
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
Click to expand...
Click to collapse
That is correct.
Power consumption, in this case, depends on what applications are left running. GPS, streaming video, etc would be a bad idea to leave running. But more workday apps use very little juice when the huge power drain of the screen is turned off.
MackTK said:
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
Click to expand...
Click to collapse
Nope... I've tried that app. Its great for locking down the normal WM hardware buttons, but it doesn't have the HTC bespoke "Home button" on the list of configurable buttons.
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
If you lock it, how do you want to wake up the device?
I wouldn't mind finding a way to do something similar. Maybe not lock the button entirely, but make it so that you have to press the power button for a long time (say 3 secs), or press the power button and the hang up button and the same time.
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
chris10230 said:
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
Click to expand...
Click to collapse
No, this wont do what is needed. The Keylock simply stops someone from using the phone. It won't stop the screen from coming on accidental in you pocket.
You can 'lock' the phone from accidental use by pressing and holding the 'hang up' button, but again this has nothing to do with screen activation.
It is true that pulling out the stylus will both switch on and unlock the phone though, so disabling the power button may not be all bad. I still think it would be better to activate the screen via a single long button press, or some such.
Totally agree with swinster's comment and proposal.
- Lock the phone by pressing + holding "hang up" button (already implemented)
- Keep phone locked and screen off until
either stylus is pulled out
or power button and hang-up button are pressed at the same time
But disable screen-on when power button alone is pressed (like it is now).
- Anybody able to implement this proposal?
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
This would be a great solution.
Mine switches on in my pocket all the time, they should have recessed the button, I thought about trying to remove it.
anorak22 said:
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
Click to expand...
Click to collapse
Its a bit of an overkil, but my laptop come with me most places.
Reminds me of the Morecambe and Wise sketch (??) where the battery was the size of a suitcase.
I think I need a car charger - which brings me to another grumble - why didn't they implement a standard mini USB interface?
Standard mini usb fits and charges.
ALExander
alx37 said:
Standard mini usb fits and charges.
ALExander
Click to expand...
Click to collapse
Ooh, Ok. I thought they were different shapes. Will look into this.
[Edit - I have just read that it IS backward compatible with USB - the different shape is becasue the HTC connection supplies audio]
I'm guessing that any old Car Charger with mini USB will work then?
anorak22 said:
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
Click to expand...
Click to collapse
When you set EnableInputAtSuspend = 0, it will not unlock the power button at suspend. . It will then only awake via the Stylus. But I do not know if this setting also works on the Diamond2.
I am having some odd problems with mine if i press the power button to put it into standby. Sometimes when i press it it turns itself straight back on others it will come back on if i shake it (like the G Sensor is somehow linked to bringing it out of standby). Can you guys check this so i can confirm if i have a faulty unit please?
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
Thanks, sounds plausible, I'll call the supplier tomorrow.
I am sure that on my D810 I could set the lock on at zero seconds with no pin code. Then the keylock would come on every time I came out of standby but with no change of accidentally starting applications and making calls.
On my D2 the password is compulsory for keylock.
Any solution here? I don't want a pin code.
I power button fix would be even better to also save battery. The accidental turning on is a very annoying feature.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
ye man,ive got this prob...the phone randomly unlocks bcoz the stylus sensor...im lookin for some application that turns the sensor off....havent found anythin yet...
This is still, by far, the most anoying "feature" of the TD2 phone. I can't believe that HTC did not have the forethought to think that people might actually put the phone in their pockets.
It should be a simple fix so that when the phone is off or in standby, the power button has to be press for say a second before the phone will come on, rather than just a single tap. They can do this to turn the phone off, so why not on?
Hi guys!
So I'll have to wait for my preordered HD2 untill 20th November here in Poland, but watching all the preview videos, a question arose in my head. I know the device isn't out yet, but its rom builds are already flying around, so maybe someone knows the answer. Will it be possible to disable showing of the lock screen after waking up the phone with the end call/power button and the device taking you immediately to the homescreen? I'm used to that on my TD2, and I think that using the phone this way is just much faster.
If i have undersood ur question correctly by completely disabling lock screen of ur future Leo, then yeah, thats possible. If u navigate through ur moving cursor to Settings, then Sound and Display and finally to Backlight options, there two options exist, when phone its on battery and/or External power, to either set the time limit to have the screen locked (and dim backlight of course) or to completely diselect it, which actually disables Leo to show and/or show lock screen.
Hope that clarification helped you
It sure did, thanks a lot I just hope that the buttons on the face of the HD2 will turn out to be as "shallow", flat and "stiff" as they look like in the vids, so that no accidental pressing of the end key while the device is in the pocket will be possible in practice
jgal said:
It sure did, thanks a lot I just hope that the buttons on the face of the HD2 will turn out to be as "shallow", flat and "stiff" as they look like in the vids, so that no accidental pressing of the end key while the device is in the pocket will be possible in practice
Click to expand...
Click to collapse
I did not think about the accidental pressing of END key before, but this will surely worry me, atleast I get the handset myself and test it in real-life...
Well even if any accidental cliks will be happening, then the lock screen will actually come in handy
well even if the buttons get pressed somehow, the screen won't react to pressure so only buttons will work if there's no lockscreen
You're right, good point hehe I guess all of us WM fans will have to get used to capacitive screens and their advantages/disadvantages
I think there will be 2 potential risks...
1. "Send" button is pressed accidentally more than once (last dialed number will be dialed)
2. Any keys get accidentally pressed continuously (device will remain on impacting battery life)
So yet a good screen locking solution will be recommended
3. "end call/power" button pressed and hold -> device turns off (at least I think so..or is there a "confirmation screen"??) -> you don't get any incoming calls/messages/etc at all =)
Btw, if you turn off the stuff as B3ler3fonte said, would there be any locking at all? So would touchscreen etc be allways "ready" and consuming battery?
In my Diamond2 (I dont use any lock screen or anything) when the screen is turned off and I press long the power button, the confirmation for powering off the device does in fact pop up, but the screen remains turned off, so its impossible to confirm the power off prompt (I see the prompt popped up when I press the pwr button once again to turn on the screen). So probably no threat from here. And even if the screen activates and the prompt for turning off the phone does come out, there's no way of confirming it in your pocket - thats the capacitive screen advantage. But the battery draining issues may occur at some scale... I guess we'll see how it all turns out in real life. The probably unavoidable problem will be if the end button would be possible to get pressed by accident - then we would be facing constant battery drainage with the lockscreen always appearing for no reason.
kabakara said:
...
Btw, if you turn off the stuff as B3ler3fonte said, would there be any locking at all? So would touchscreen etc be allways "ready" and consuming battery?
Click to expand...
Click to collapse
That could help but won't much, because(at least current models) they wake up upon any reminder, battery low, call, text, etc. Besides you will have to use both hands to turn phone on (the top button, unless you got ET fingers ) HD is tall...
Cannot see that menu item
B3ler3fonte said:
. If u navigate through ur moving cursor to Settings, then Sound and Display and finally to Backlight options, there two options exist, when phone its on battery and/or External power, to either set the time limit to have the screen locked (and dim backlight of course) or to completely diselect it, which actually disables Leo to show and/or show lock screen.
Hope that clarification helped you
Click to expand...
Click to collapse
Sorry but there is no setting for lockscreen in this menu. There is only settings for the backlight in battery or charged mode.
There is no control for the lockscreen at all Still looking for a way to completely disable this damned lockscreen.
Agreed - even the entry in the Settings tab that claims to control the lockscreen seems to have no impact (I have mine set to 12 hours and it completely ignores that) and the standard registry hacks don't seem to have any effect.
This is a real puzzler!
jgal said:
Hi guys!
So I'll have to wait for my preordered HD2 untill 20th November here in Poland, but watching all the preview videos, a question arose in my head. I know the device isn't out yet, but its rom builds are already flying around, so maybe someone knows the answer. Will it be possible to disable showing of the lock screen after waking up the phone with the end call/power button and the device taking you immediately to the homescreen? I'm used to that on my TD2, and I think that using the phone this way is just much faster.
Click to expand...
Click to collapse
back to the original topic:
changing the registry key: HKey_current_user/ControlPanel/Backlight/AutodevicelockEnable to value '0' (zero) works with other 6.5 roms
by default it must have seen to '1'
edit: my bad, its been solved already
idrisito said:
back to the original topic:
changing the registry key: HKey_current_user/ControlPanel/Backlight/AutodevicelockEnable to value '0' (zero) works with other 6.5 roms
by default it must have seen to '1'
edit: my bad, its been solved already
Click to expand...
Click to collapse
Is it solved already?? i can`t find it
mika34 said:
Is it solved already?? i can`t find it
Click to expand...
Click to collapse
the clarification was made to the guy who started the thread in post 3. if thats not it then the reg change i have put it should disable/enable the lock screen if the power button is pressed
Hi, my typical procedure before putting the phone in the pocket is to hold right soft button to lock the screen and to switch off the screen with the power button. I wonder if there is a way to do it at once. You press the power button and screen goes off locked?
Thanks.s.
Install AutolockScreen 1.7 (I'm at work so don't have the cab with me, but if you search this site you'll find it. Install the cab and then go to Start\Settings\System\SmartLock and tick Suspend lock.
LockDevice works well...
http://www.1800pocketpc.com/2009/09...k-the-windows-mobile-screen-after-wakeup.html
Do either of these lock screen apps consume a lot of power?
I understand they have also been created with power saving feaures but what do they run like in a coarse of a day for instance, do they drain the battery quickly?
Thanks.
HD Tweak also has option for autolock when device turned off
Fallen Spartan said:
HD Tweak also has option for autolock when device turned off
Click to expand...
Click to collapse
It does but it has a problem with the background light not undimming after locking.
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
rpimps said:
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
Click to expand...
Click to collapse
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
ClydeB1 said:
It does but it has a problem with the background light not undimming after locking.
Click to expand...
Click to collapse
My phone is set to quite dim anyway in Power settings so this doesn't affect me.......hence why I forgot about it
I've attached the cab which ClydeB1 was talking about, i.e. SmartLock 1.7
Mastoid said:
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
Click to expand...
Click to collapse
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
Fallen Spartan said:
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
Click to expand...
Click to collapse
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
True, yes, but I use Smartlock 1.7 so phone does lock
Fallen Spartan said:
True, yes, but I use Smartlock 1.7 so phone does lock
Click to expand...
Click to collapse
Was using your answer and expanding on it for explaining to rpimps
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
Oh ok thanks for the info. Mine does unlock when I get a call/sms but I text a lot so I prefer it to do that, otherwise I'd be wasting a lot of time unlocking it every time I got a message.
Thanks for the hint ClydeB1 and thanks for the cab Fallen Spartan.
I tried SL 1.7 and there are three things, which I do not really like.
1. The phone returns to the very same screen where it was switched off. Some may consider it a pre. I prefer to see the clock when I switch it on.
2. The screen blink once when the phone is switchd on. I find it a bit irritating.
3. I do not see how I can uninstall it.
So, I wonder if you can undim the screen in HD Tweak by touching it or you need to do something extra?
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
ClydeB1 said:
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
Click to expand...
Click to collapse
The way I had activated the lock was by pressing and keeping pressure on the end call softkey, after a few seconds it vibrates and activates the lock. It comes on automatically when you put the screen off or restart the phone.
Regards.
Auto-lock screen
I'm running CLEAN ROM (B version) with SPB Mobile Shell.
Considering I don't want any superficial apps installed on my HD, I used HD Tweak and turned autolock on.
To get over the "background light not undimming after locking" problem, I initially unchecked "Automatically adjust backlight" under Settings > System > Power > Backlight and set at 100%. I also set the "Dim backlight on Device" when on battery power to the same time as "Turn off device if not used for". In my case that was 1 minute. I tested and this worked fine.
I then went back in and checked the "Automatically adjust backlight" checkbox.
I also performed the wake up with volume button reg edit making it easier to wake up device.
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
UPDATE:
Just tested again and I realised if you wake up device but don't unlock. The screen will automatically dim. Unfortunately if you unlock immediately after, the dim screen issue rears it's ugly head again. The only workaround at this point is to completely disable dim backlight.