Hi,
i have upgraded my sx56 to wm2003 through "programme a".
my network provider is 1800 and the devise isnt recognize it.
i want to change back to 2002 but when i launch the programme a
i get a messege: "cannot execute the remote communication program, please make sure that the usb/serial cable is proparly connected"
the device is connected through usb cradle and the activesync recognize it exelant.
i dont know what to do next (i dont have any sd card right now).
thanks for your help
Use the sd card method to downgrade, look around the forum for details.
hi
i have a QTEK S200. Today i tried to update my ppc with a WM6 version, but after 40min. the upgrade program crashed down.
After this it was impossible to enter in the main menu of the ppc. the ppc remains hanging on the QTEK screen. I've tried to enter in the bootloader with the color screen, to connect the ppc with my usb cable an the notebook, but my notebook does'nt find my ppc. And now the battery is empty (even connected with the usb cable on a working pc) and i can't switch on my ppc.
Any solutions?
Charge your Batterie and make Hard Reset. Charge VIA Caddy.
done. but the screen remains on the QTEK start page. Bootloader is possible and i get the 3-color screen but my notebook does'nt find my ppc... It's strange because yesterday everything was fine and the connection to my notebook was ok but in the 3-color screen i can't build a usb connection.
ok, problem solved. i've puted a new core on the ppc and now appears the old wm5.
how did you manage to get back to the old rom ? i am stuck on the qtek screnn and the only thing i can access is the USB flash 3 colors screen but my pc doesn't seem to the device...
any help greatly appreciate )
thx in advance
ben
do you have the problem with the SPL 3.08?
no I am in SPL 2.20... and IPL 2.09...
thanks for your help
please write the full ipl/spl number!
here it is :
IPL : 2.09
SPL : 2.20.0000
thx
finaly I manage to dowgrade it by changing my driver - the problem was coming from vista
important is to know, that the 3-color screen give the possibility to communicate with your computer (connected with usb).
so, you have the possibility to copy a new core on it. after that you put a new wm or you take the old one. in my case, the old wm5 was still on the ppc.
yesterday i was testing the wm6 in german but it was not really nice... so i work again with wm5 and wait till a complete wm6 solution is available.
Hi Peeps,
I have been lurking and learning here for a while now, but I cannot find the solution to this problem,
I hav e an Orange SPV M3100, using the HardSPL boot loader (2.10.oli), the latest rom from orange (oct 07) and radio version 1.38
the problem is that when i sync with active sync (4.5 build 5096) it syncs ok and then about 1 min after sync it loses connection.... so if im copying files or about to copy i cant, I then need to reset the phone and restart AS to get it to connect again???
any ideas as to what is going on? im tempting with upgrading the rom/radio but i dont want to try it if it is going to disconnect half way through!
Cheers
Dazzler
dazzler22 said:
Hi Peeps,
I have been lurking and learning here for a while now, but I cannot find the solution to this problem,
I hav e an Orange SPV M3100, using the HardSPL boot loader (2.10.oli), the latest rom from orange (oct 07) and radio version 1.38
the problem is that when i sync with active sync (4.5 build 5096) it syncs ok and then about 1 min after sync it loses connection.... so if im copying files or about to copy i cant, I then need to reset the phone and restart AS to get it to connect again???
any ideas as to what is going on? im tempting with upgrading the rom/radio but i dont want to try it if it is going to disconnect half way through!
Cheers
Dazzler
Click to expand...
Click to collapse
I have this problem often as well, I suggest that you do the following. Go to the Devices MMC and uninstall "Windows Mobile Device" from the network adapters topic. Then remove and reconnect your device. I also removed the activesync program and reinstalled it from the web. Fixed the problem for a long time.
One other thing you can do is to go to the USB to PC applet in the connections settings page and disable the "Advanced Network Functionality" option. that should make connection more stable.
Can't say I know what's going on but those two things seem to help.
Hello people,
I can´t connect my qtek 9100 with my computer, can anyone help me?
Regards
find usbkiller software and use that to swtich (very often thsi software solves the problem
im just hard reset my wizard (qtek 9100) then i will connect my sync to the PC....its cannot read my phone........can anyone help me plis.......
i need sync to my pc