Hp 914c Doubt! - Sable

Hey guys i have a question.
I got my HP iPAQ 914c 6 days ago and i wanted to install Windows Mobile 6.5.
The Question is..Do i have to do anything before i install it like flash or something like that, because i only used it for calls and texting.
Does it Run smoothly on the HP?I didn't want to use a ROM that's laggy.
Thanks in advance, Darth Oro.

Hi Oro,
If you want the phone just to call and write SMS, you should keep the 6.1
But if you want to change to 6.5, there are several alternatives. Depending on your preferences (for example, the language), you should look at the Sable forum and see how many ROMs are offered to you.
What you only need is a 6.5 ROM into a 2Gb or less MicroSD and you got it. Read carefully how to flash. And whatever you did before flashing doesn't matters.
I hope this was useful to you

Related

Updating ROMS

Hello, I apologise for a completely rookie question, but I am going to ask cos I am unsure...
I have an T-Mobile MDA COMPACT III UK version of the P3300. It runs windows mobile 5.
I want to give the B&B ROM a try and have read up on how you do it using USPL.
My Question: When I do a search for the ROM it comes up in the "Windows Mobile 6" thread, does this mean I need to upgrade to windows mobile 6 first? Or can i just flash with the ROM?
Again sorry for the daft question, all answers will be greatly appreciated!
It is in the 'Windows Mobile 6' section, because it is based on WM6. You don't need to upgrade first, this is what you are doing by flashing the ROM.
Hope this helps!
Thanks for your fast reply, helps alot!
Do you have a recommendation for which ROM is the best out there?
Everyone usuallly recomends the B+B ROMs, but personally i like the Vanilla 2 ROM, its all down to personal preference. Vanilla is quick, and stable, B+B has a lot of features. (Both are based on WM6)
The choice is yours

hi, a question about rom cooking wm6.5

please dont get angry,
but,
do i need a microSD to put on windows mobile 6.5?
im not good at technology and stuff. i dont really understand the 'how to'.
thanks in advance.
anyone?......
this is the wrong place to be asking, go to X1 rom dev, and since ur a newbie ask and collate on Kid_DC's newbie chef thread
actually ive just realised what you are asking after reading your post, previously only read thread title....
anyway what you are probably asking is not how to cook 6.5, not how to flash 6.5...
Cooking- building, customising and tweaking a rom from a rom kitchen
Flashing- getting the above rom installed on your phone
anyway if you want to flash a windows mobile rom you dont need a SDcard, all you need is your phone; usb cable; a computer; windows mobile device center installed; and an activesynce connection between the two....
if you want to flash a 6.5 rom 1st go to the x1 rom development section then read a sticky thread on how to flash a rom...
btw i suggest itje's win6.5
thanks. this website is quite a steep learning curve for me. all these new words etc.

WM 6.5 on HTC clone ?

Hello guys.
I have purchased a HTC clone also known as the HTY 3238 Model.
Basically as far as I am aware this is pretty much a clone of the 3232 Official design.
Now I have seen WM6.5 ROMS on this site for the Official 3232 model but I was wondering if anyone has successfuly put WM6.5 on the HTY 3238 Cloned model ?
Thanks very much.
Oh and if it is indeed possible could someone provide some links to what I will need/guides.
I have had a look round and I think I have found what I need but I just want to be sure just so that I dont brick my phone lol.
Btw sorry for the double post. I could not edit my post.
Thanks again.
I bought mine with 6.5. . .
ronp76 said:
I bought mine with 6.5. . .
Click to expand...
Click to collapse
Well that means it can definately support it then which is good.
ENTERPRISE1701 said:
Well that means it can definately support it then which is good.
Click to expand...
Click to collapse
Here is a link to another xda thread where a discussion about flashing ROMs to clones exists:
http://forum.xda-developers.com/showthread.php?t=552024
While it is not a Jade Clone, info is info and hope springs eternal!
ENTERPRISE1701 said:
Hello guys.
I have purchased a HTC clone also known as the HTY 3238 Model.
Basically as far as I am aware this is pretty much a clone of the 3232 Official design.
Now I have seen WM6.5 ROMS on this site for the Official 3232 model but I was wondering if anyone has successfuly put WM6.5 on the HTY 3238 Cloned model ?
Thanks very much.
Click to expand...
Click to collapse
Hi! Look at this forumhttp://forum.xda-developers.com/showthread.php?p=4817395 There (somewhere) are new 6.5 ROM for 3238 English version. I have 6.5 v3.06 and I am satisfied. Bye!!
andour said:
Hi! Look at this forumhttp://forum.xda-developers.com/showthread.php?p=4817395 There (somewhere) are new 6.5 ROM for 3238 English version. I have 6.5 v3.06 and I am satisfied. Bye!!
Click to expand...
Click to collapse
While there is info about various 6.5 ROMs in that thread BUT the general feeling there is that Clones cannot flash from 6.1 to 6.5. I know because I asked the question there and in other Jade threads.
The thread about Sunno Clones has users who supposedly have flashed from 6.1 to 6.5.
ronp76 said:
While there is info about various 6.5 ROMs in that thread BUT the general feeling there is that Clones cannot flash from 6.1 to 6.5. I know because I asked the question there and in other Jade threads.
The thread about Sunno Clones has users who supposedly have flashed from 6.1 to 6.5.
Click to expand...
Click to collapse
I don't understand you. I bought this device with WM6.1 and I flashed on version 6.5. I haven't got any problems with this ROM. If you want link for download, I share (send) you...
andour said:
I don't understand you. I bought this device with WM6.1 and I flashed on version 6.5. I haven't got any problems with this ROM. If you want link for download, I share (send) you...
Click to expand...
Click to collapse
I *think* he said, prior to your post that no one in that thread said that they were able to flash from 6.1 to 6.5.
Possible
I to hace the Clone and upgrades with the Smart.upr on my memory card. I did have to do a few things.
1. Small Memory card I used a 1 GIG card.
I took out the Sim card. and did it by holding down OK, Left Green Button then the power. it started working in a minute or so . IT took 10 Min to finish.
I tried all other ways and they DID NOT Work. Best of Luck...
I also updated my T3238 Clone from WM 6.1 to WM 6.5 without any problems and it was working fine.
The only problem was that I could no longer define buttons with different programs. In WM 6.1
I used "AEButton Plus" and with that programm I could do that. Because I want to push only one button while I am driving in order to use Voice Speed Dial. Therefore I went back zu WM 6.1.
Now I only have to push the ok-button a little bit longer, tell my phone whom to call while IGO is still working.
Amaly said:
I also updated my T3238 Clone from WM 6.1 to WM 6.5 without any problems and it was working fine.
The only problem was that I could no longer define buttons with different programs. In WM 6.1
I used "AEButton Plus" and with that programm I could do that. Because I want to push only one button while I am driving in order to use Voice Speed Dial. Therefore I went back zu WM 6.1.
Now I only have to push the ok-button a little bit longer, tell my phone whom to call while IGO is still working.
Click to expand...
Click to collapse
When I had problems with the ROM I had, I realized how difficult it is to try to flash ROMs and end up with a working product. As a result of that incident, I also learned that there are differences between ROMs and that all versions are not created equal or fully functional.
As a result, I now believe it is best to stick with what you have. 6.1 supposedly is felt to be better than 6.5 which is buggy IMHO. Hopefully WM7 will be better but that is a year away.
I completely agree to you. I only try to flash a rom when I'm 100 % sure it's the right rom for my device and if I have the original rom to go back.

htc touch hd

hi guys im new here and im new in all of this.
i just bought htc touch hd so i got some question.
1. my htc with wm6.1 some people told me that it will be good if i will upgrade the wm6.1 to 6.5 and my device will be faster'
so how can i do that? i need to buy the software or it is free?
if i'll upgrade the software all the settings and the software will be remove?
2. where can i find sites for free apps?
thanks a lot.
read the wiki!!!
has all your answers!
it is free
need to hspl first (sticky in rom dev)
it will wipe everything but you can back up your data
it will wipe your system but you can revert back to your old rom easily
find free apps here!
o.k what is hspl? what is ROM?
do you recommended me to upgrade to wm6.5?
how i backup all the programs i dont have the installations. thers a guids how to do that all?
thank you!
hspl is a hard second program loader. you need to flash that to be able to change the operating system on your device.
roms are images of the operating system. they provide windows mobile in different versions (6.1 / 6.5 / 6.5.3 or even 6.5.5) and additionally come with different versions of manila (aka touchflo 3d or in newer versions also sense).
these are very basic things that you should read more about before attempting to flash your device, or you will break it. it is not like "press one button - done". flashing your device means tempering with your waranty and bypassing locks, set by htc.
you should definetely read threads like the "dummy's guide to hspl and uspl" in the rom development section of the blackstone forum.
in that section you will also find the differnet roms provided here, marked with [Release].
have a look at the different threads to find a rom that you like from the screenshots and read through the experiences, people post with it.
also, a lot of basic windows mobile information can be found on wikipedia's windows mobile and blackstone pages.
and of course, most of all, on xda-dev's own wiki here: http://forum.xda-developers.com/wiki/index.php?title=File:HTC_Blackstone.png
oh, and you shouldn't really back up programs, but re-install them on the new operating system, backing up too much stuff will cause your rom to run instable and slow. you should only use pimbackup, or MS myphone, or outlook, to backup personal data.
if you ever consider to go back to the exact rom you are using now, you could make a full backup with spb backup, but restoring that backup on another rom is highly un-recommended.
wwooww its complicated i think i will give up thanks anyway.
M-Be said:
wwooww its complicated i think i will give up thanks anyway.
Click to expand...
Click to collapse
Don't give up. That's defeatist talk. Yeah, it is intemidating at first but nothing worth doing is easy. Just read and you will understand. I read and read and read and when I set down to do it I was able to install a custom rom without incident. That was a year and a half ago. I'm probably going to install a new rom soon so I will read and read and read again to refresh my memory. Part of the complexity stemed from there being two different methods of flashing the phone, iirc. If you give up on trying to mod your phone you might as well jsut have bought an apple.
M-Be said:
1. my htc with wm6.1 some people told me that it will be good if i will upgrade the wm6.1 to 6.5 and my device will be faster'
Click to expand...
Click to collapse
It's in their imagination.

[Q] HTC Touch Dual upgrade to Windows 6.5 (Bell Neon 400)

Hi,
I'm very new at this, I've searched the forums but find dead links to things, so I'm reposting.
I have a Touch Dual Neon400 from Bell Mobility. It's currently running Windows Mobile 6.1, I'd like to run Windows 6.5 (or better?). I don't want any fancy functionality just a better interface.
Is there a simple guide anywhere that will take someone through the whole process step by step. I don't know anything about ROMs, have never flashed the phone etc.
Thanks for your patience.
Alex
alexhatz said:
Hi,
I'm very new at this, I've searched the forums but find dead links to things, so I'm reposting.
I have a Touch Dual Neon400 from Bell Mobility. It's currently running Windows Mobile 6.1, I'd like to run Windows 6.5 (or better?). I don't want any fancy functionality just a better interface.
Is there a simple guide anywhere that will take someone through the whole process step by step. I don't know anything about ROMs, have never flashed the phone etc.
Thanks for your patience.
Alex
Click to expand...
Click to collapse
to get a look NEON400 WM 6.5 http://forum.xda-developers.com/showthread.php?t=758938 (post by Rataplan )

Categories

Resources