Hi,
when I'm loged in the network via 3G I very often don't get a dialing line meaning that the device says dialing but after a while it gives a fst beep beep sound and closes the connection. It is not the normal busy tone its faster. If i then switch to GSM Mode it works just fine.
WHat can that be?
Related
hey all i i just got the unlimited data package u get with a hiptop. its suck i had to get a hiptop just to get the data package but thats neither here nor there. well i want to know if there is a way to make the gprs stay connected when i make calls. currenty gprs stays on when i recieve a call but for some reason it gets turned off when i make the calls. i like to hav my msn always connected to the internet so i can get messages and email instantly . right now everytime i call someone i got to go and turn msn back on .
im already using the always on reg hack but like i say it gps turns off when i make calls
Can't do.
The device is not a Class "A" device - which it has to be to keep up both a voice and data connection at once.
There are no Class "A" GSM devices on the consumer market at this time - from anyone.
yeah, but it could at least re-establish the data connection after the voice connection has ended :>
msn auto reconnect
is there a hack to get man to reconnect byitself after a call uve made a call and been reconnected to gprs?
msn auto reconnect
is there a hack to get man to reconnect byitself after a call uve made a call and been reconnected to gprs?
msn auto reconnect
is there a hack to get man to reconnect byitself after a call uve made a call and been reconnected to gprs?
msn auto reconnect
is there a hack to get man to reconnect byitself after a call uve made a call and been reconnected to gprs?
ok, this is a strange issue and i am not too sure about it, so correct me if i am wrong.
When i use my Universal, i use the Hack which enable my GPRS/3G always on, it works great and when phone call comes in, the dis-connect the connection and re-connect it once you finish phone call.
But with Athena, after i apply the same Hack, although the connection is always on, but you CAN'T received any phone call ! So i turn the Hack off and do some more testing. I found out when i use Opera and connect to internet (3.5 G), i can't receive phone call, but when i close the program, the connection change to 3G (instead of 3.5), then i can receive phone call again.
But notice here, the 3G is still on when i receive phone call, so it doesn't disconnect any more.
So important to remember don't use the Hack on Athena, otherwise you can't receive phone call.
Anyone can explain this?
Hello,
I have HTC Athena AP3.0 wild problem with inbound and outbound calls
Some calls get fw to VM even at full signal bar.
When making an outbound call 50% of the time the phone just hangs up 2 or three seconds after I press the SND button (the call is never connected)
Is there a log I can enable to see what is being transmitted between the tower and the phone ??? How can I debug this problem?
Thanks
Hi all,
I've got my HD 2 for a week now and everything seems to be working fine, except for a very important bit: the phone.
When I'm connected to the network with a data connection, incoming calls are not possible after some time. The caller just gets a busy signal or my voicemail. This also happens when I haven't been actively using the connection for some time. Calling is also impossible most of the times this occurs, very annoying! Anyone else got this problem? It only happens when a data connection is present, under phone only use there is no issue.
When you say "data connection" do you mean Bluetooth, USB, or HSDPA/3G etc?
I haven't noticed this myself while connected to HSDPA...must check it out.
It only happens when I'm using 3G/HSDPA.
True
I have same problem.
Sometimes the call completely lost and sometimes the message "cannot dial for ...." pops up.
I think it could be connected to network itself ...
Hi all,
Can someone help me please : ) Thanks
The problem is network connection mode from GSM to WCDMA and opposite WCDMA to GPRS
Is It some way I can disable GPRS data connection, but keep WCDMA data connection + keep GSM signal as well
I will explain way : )
The problem is when Im driving my car and listen internet radio.
So when Im driving seem Im passing 3 Network Cells in my road to work
Each time when phone connecting to other cell first he connects to GPRS signal later he changes to WCDMA data Everything is logical maybe how the network cells works
But it is not good for me as the time phone goes to GPRS data / mode my radio stop working and before I have 3G signal maybe 5 minutes or more ….
1 When phone in GPRS mode and the radio on it is seams trying to stay for wile before connecting to WCDMA Maybe up to 5-10 minutes
2 When phone in GPRS mode and the radiooff phone in couple minutes changes to WCDMA
---------------
So one day I set my phone network to WCDMA MODE to see what happens and I can to believe that my phone all time keeps 3G ( WCDMA) connection without problem Internet radio work without stopping not crashing nothing at all everything perfect ….
BUT When I drive to my work place where is the signal very poor I have lost phone connection to network because my phone signal to only WCDMA MODE -- So to have signal in my work I need to change to GSM mode or auto mode
Is it some way I can have GSM mode + WCDMA MODE but without GPRS data connectivity or some way to block my phone connecting to GPRS mode data ?
Thanks for help
I have found on google play
Than someone have app for what I need The app name 3G Data Only
But I would like to know how manually I can disable 2G data ?
I do believe that in phone setting some way impossible to disable this + my phone rooted so I can what I need : )