Related
hi guys i flashed my htc hd2 wm6.5 to nand android rom in 1st 1 week of usage i have no problem and enjoyed the nand android rom in my htc hd2 until one day my hd2 hang and when i reboot my unit it was hang on splash screen only....
i reflashed it using magdlr ver. 1.11 into the same nand rom im using but i have no luck...it still stock on tje android splash screen...what will i do guys?
im planning to flash it to wm6.5 rom,but what will i do?it never boot on tri color screen it only boot on magdlr screen
and how can i flash it wm6.5 rom cook or stock rom i want to revert it back to wm6.5
my hd2 running on gingerbread 2.3.3 nand(V1.8) rom before it malfunction..
Well, my forensic analysis has come up with the following technical and somewhat difficult solution to your present problem: "Click the search button"
Now I know it may sound intimidating, but I tested that feature out for you and came up with this:
http://forum.xda-developers.com/showthread.php?t=905841
matt
Shut down completely your phone (remove batter for 15 sec too)
Place battery back and now hold volume down button.
Still hold volume down button and switch on your phone.
You get 3 color screen.
Now attach your usb cable and connect it to PC
Find on this forum your phone stock win mobile rom (link to officila roms thread)
Run stock win 6.5 rom exe (this is sample name: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe)
Follow instructions on your PC screen. On final your phone reboots.
Enjoy your stock phone.
hi datasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
can i flash wm6.5 rom into magdlr usb flasher?
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
Switch off, hold vol down button in and switch on.
As ClydeB1, states you must hold the vol down only and not hold the power button.
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
when you get ready to power back on you have to hold volume down and keep holding it while is booting and it should switched to the tricolored screen, plug the usb cable and it should say usb at the bottom when it connects, and if you have hardspl which I know you have after running android, you can use any custom winmo6.5 rom it doesn't have to be an official rom.
can i flash wm6.5 rom into magdlr usb flasher?
No, flash from bootloader.
awts...i cant enter into booloader mode....im so sure what im doing i sure i follow the instructions of you guys....holding down the vol button and switch on
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
I don't think you can flash WM6.5 with flasher. You have to restore from recovery screen by remove battery and restore.
ClydeB1 said:
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
Click to expand...
Click to collapse
yeah im sure i was holding down the volume botton and switch the power on
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
ClydeB1 said:
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
Click to expand...
Click to collapse
volume botton is perfectly working it work around in magdlr mode actually i flashed my hd2 into android rom right now flashing is done without problems, but its not boot normarly it boot only in splash screen....
can you guys post a link of task 29...i will try this method and flash stock rom
but the main problem is i cant enter into bootloader mode
I use this tool for Task29 - http://forum.xda-developers.com/showthread.php?t=917807
Once you run Task29 though it will wipe the NAND memory and magldr and if you can't get back to bootloader mode then you will be stuck on the splashscreen.
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
temporary_24 said:
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
Click to expand...
Click to collapse
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
ClydeB1 said:
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
Click to expand...
Click to collapse
Hi,
Yes. I had one with a 8 on it. I've installed the other, and it worked (or the other way). Thanks.
Regards,
guys my phone revive with a jtag procedure i went to a technician shop here in the phillipines
my phone running in stock rom again...
After flashing MAGLDR113 to install an NAND build my htc get freezed in the startingscreen. I can´t get into the bootloader and i also can´t do an hardreset.
What else can i do to get my hd2 working? I hope you can help me.
maybe usefull:
radio rom 2.15.50.14
Goatrip stock rom
greets schueffi
phone completely off
press power to turn on, but keep it pressed, dont let go.
phone will vibrate as it starts, then you see the first boot screen, (keeping power pressed still) then the screen jumps black with yellow at teh top, keep pressing power until teh menu items apear.
thanks but i´ve tryed that for many times but nothing happend...
is it possible to flash an rom without getting into the bootloader?
have anyone an other idea what i can do?
Not sure if this will help you, but I was being a noob and trying to use the touchscreen with magldr to select a menu item, but you're meant to use the volume up and down keys and the call button to select an item. To flash, select usb flasher. Hopefully that was of help
Hi, is there a solution for this? I have the same problem.
I wanted to install NAND Android on my HTC HD2 device actually running WM and Android on an SD card. I followed all the steps carefully:
I flashed HARDSPL with HSPL4
I updated the Radio version to 2.15.50.14
I installed MAGLDR113 and the installation gave me no problems, but when rebooting, the phone gets stuck in the initial screen and it doesn't either boot or let me go to the boot menu no matter for how long I press the power or the down volume button.
Anybody can help?
Thanks
Hi All,
I have been running a few NAND Android ROMS but seem to have an issue where pushing the power button on the HD2 no longer locks the phone, it just brings up the Power Off / Airplane mode options etc.
I think the button is damaged and sticking so wanted to go back to stock WinMo ROM to test this and if necisary send back for repair.
I have downloaded the stock O2 ROM from HTC.com but cant work out how to load this ROM. I presume I need to boot to HSPL?? only thing is I cant boot to it, I just get the MAGLDR screen.
Not sure if I'm doing something blatantly stupid or even if the button is not actually broken, although it does exactly the same in all Android builds I have tried. Is there a softkey that can be set to lock the screen?
Any adive much appreciated.
Thanks
Denno
Phone off
hold vol down
tap and release power
keep holding vol down till coloured screen apears
plug in usb, wait for serial to chnge to usb, run the flash.
If you have the 3.14 stock you also need to run hspl4 and choose 3.03.0000
Or
flash from sd card (look it up) will do both the flash and set 3.03.0000 all in one go.
Dear all HD2 professional,
I got a problem with my HD2 after flashing with a MAGDLR113, it has successful message on my pc, but when my phone restart it always stuck on htc logo.
i search with many forum in xda and try, but still not luck.
My problem is it stuck with htc logo when phone is open. although I try to hard reset (hold vol down + up + power) or (hold down + power), and connect to PC, it do nothing, it still at htc logo.
Now, I don't know what I'm going to do next?
please anyone give me an advice to fix it?
thanks,
dane
You probably didn't set correct radio or spl,, magldr wont boot without 2.08.hspl AND radio 2.07.50 - 2.15.50,,,
Get them both right, magldr will start
thanks samsamuel,
But
Could you tell me how to set radio or spl... or give me a link to do that?
Because I was stuck on htc screen, I can't get out from it.
thanks again,
You already set the spl, that's how you flashed magldr.
Enter bootloader, connect USB, flash the radio, magldr will now start.
here,read this http://forum.xda-developers.com/showthread.php?p=11097380
A few wrong / confusing / potentially dangerous (to tmous) steps listed in that thread. A good read with good links, but use it to help understand the process, not as a definitive guide.
(Example, it says if you have spl 3.03.0000 you should flash a stock rom to give spl 1.42.0000,,,,,, this step would brick a tmous,, when all you needed to do was use Hspl4 to set either 2.08.hspl,, or if the warning about not using Hspl4 scares you, use Hspl4 to set any spl, and then use hspl3 to set 2.08.hspl)
As with all threads, take the info on board, then confirm what you learned by reading other threads.
Many threads are slightly out of date, and so although the info is useful, its not always the easiest / best.
I think you need to root your phone. search on addictive tips.com, you will find step by step tutorial on how to root your phone and install android
Thanks guy,
But i still can't Enter to bootloader.
it should hold voldown + power, it still in htc logo and I didn't see any else even I try again and again. what problem with that or my phone got another problem?
sorry for my misunderstanding.
callme_dane said:
Thanks guy,
But i still can't Enter to bootloader.
it should hold voldown + power, it still in htc logo and I didn't see any else even I try again and again. what problem with that or my phone got another problem?
sorry for my misunderstanding.
Click to expand...
Click to collapse
Remove the battery then ofcourse put it again and do your thing (volume down + power) "hold both":fingers-crossed:
So i was trying to put android with easy android and it seemed like it worked, it said we hacked it at the end. Now the phone doesnt boot up. I even tried hard resetting any help? Do i need to flash a radio? If so how and which radio?
Full filename of anything you flashed plus tmous or regular? What does "wont boot up" mean?
Details details details.
Im tmobile US. Theres an application that does an automated process. It's called Easy Android. I dont have the link for the post but it's hear on xda. When the phone boots up it just shows the T-mobile logo.
Please tell me if you need more info.
oh right, well in taht case its almost certainly either the wrong hspl or the wrong radio.
Magldr wont start unless BOTH spl is 2.08.hspl and radio is 2.07.50 or higher , but since you have a tmous the radio must be OK, so it must be the spl
enter bootloader (phone off, hold hold keep holding voldown, tap and release power, hold voldown till tri colour screen appears) what does spl line say?
Hey
Its 2.08 HSPL
BTW i appreciate the help
in that case i'd be heading back to a stock rom, get it back to as-new and start over.
Grab either the 2.13 or 3.14 TMOUS roms and flash via sd card. that will put it back to as new, then apply 2.08.hspl - magldr - cwm - rom.(get the toolkit)
I wont have a problem finding the rom, but i just need to know how do you flash the rom, do you just enter bootloader and it auto installs?
Thanks
get the phone into bootloader mode, and make sure the computer detects the phone before you start the flashing process (i.e. running the RUU).
If the rom comes in an exe file, rename it and make the file extension .zip
Then go into the .zip file and remove the file which has the file extension .nbh
Rename this file to LEOIMG.nbh
Put this file at the root of a 4Gb or smaller sd card
Put the card into your phone and boot into bootloader (hold vol down button while booting)
Should find and flash the rom all by its self, might ask you to press a certain button to confirm, been a long time, I can't remember for sure if you have to press a confirmation button
Wait for it top finish
Make sure you have 50% or greater battery before you flash
MAKE SURE you have the correct stock rom for your phone. There are different stock roms for different HD2's depending on what model HD2 you have. Flash the wrong one you could be screwed for good
Okay, running RUU while in bootloader worked perfect.
Got the ruu straight from tmobile.
Windows 7 auto installed bootloader drivers for me.