Database Users

critical problem in jamin for help please

My friend's jamin when he tried upgrading with smart1 wm6
after the flashing process finished it gives the 3 colors of boot loader
the screen flickers continously with the 3 colors
no way to hard reset the device
and activesync doesn't feel it
I searched all the forum for a problem like this but I didn't find any
any suggestion please, or any help?

Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.

NetrunnerAT said:
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
Click to expand...
Click to collapse
Please how can i flash with the activesync doesn't notice my device and where's NVID Rom
Ok. I'll search for it but please help how can I flash it to the device which doesn't recognized or felt by PC

If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now

divxmaniak said:
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
Click to expand...
Click to collapse
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.

must use NVID rom. maybe qtek nvid one from here? http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs

hasanemara said:
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
Click to expand...
Click to collapse
If the problem still there, Try to release the battery for 1-3 hours and put it again to the device, go to the boot loader and pray. Hopefully it could work. Actually, this way worked on my Himalaya and Prophet.

Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).

ekto said:
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
Click to expand...
Click to collapse
I shall try and tell you the result

error 260 this is the result

i have a slight variation problem like this...
1. i was upgrading my O2 Neo to the latest WM05 & the phone went to bootloader mode & the upgrade started searching for the phone as normal..then some error & it stopped upgrading while the phone was in bootloader mode..
2. at that time,i got an urgent call & had to leave the phone in bootloader mode...
3. when i came back..the phone was dead & now it wont startup at all.. not even in the bootloader mode.
4. Maybe the batteries dead...so i charged it (Over night)..nothing happened in the morning..
5. kept the battery removed for about 5-6hours & still nothing happens..it simply does not startup.
6.I've tried holding the camera button & resetting, but it wont go into bootloader mode.
7. i;ve tried holding the connections button + camera button _ reset but it wont hard reset...
can anyone help me here...
what can i do???

hasanemara said:
error 260 this is the result
Click to expand...
Click to collapse
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.

ekto said:
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
Click to expand...
Click to collapse
No I didn't change any and I can connect my o2 xda mini to the same cable
I want to ask few technical question
HOW CAN A SOFTWARE DAMAGE THE DEVICE?
CAN A SOFTWARE FOR EXAMPLE BURNS A PROCESSOR OR SOMETHING LIKE THIS?
If So there will be a big problem with those types of devices
a virus for example can destroy my device's board or processor!!
Yesterday My friend went to an I-mate customer service who tel him that
the board had been destroyed by the bad software !!!!!!!!!
Please Give me technical advice about this problem
and is there a web site for him to buy this board (i-mate jamin)?

I've tried everything... even tried it on my desktop... but my phone just wont turn on now. i've kept the battery removed for more than 8hrs now... i've even charged it for more than 8hrs non-stop..nothing happens..
maybe i should get hold of a charged battery & try it with that battery...?
Any clue how to get my phone started??

got it working !!! PHEW... i used my HP battery which was charged & put it into it..now i've got my bootloader & i'm installing the new OS as we speak... 15% done.... keeping my fingers crossed

done.. got my HP Ipaq battery , which was charged & my new started up in bootloader more.. PHEW !!!
66% done... keeping my fingers crossed

ok, installed...now, one more problem..my touch screen's not working...???
Any idea what to do?
i installed "Prophet_PDAViet_Step1"

HTC P3300 can´t connect with ActiveSync

I cannot switch on my device. When I tried hard reset it stucks at bootloader. so tried to enter boot mode (red green blue screen) and reinstal rom. it starts and look it works properly but instalation of new room is not completed (error 270). have read simmilar topics in forums and it seems it´s because device is not connected with activesync. any ideas how to fix? please don´t say I have a brick

Cannot connect
Use the original cable supplied by HTC. There seems to be an issue with other cables.
sanjeev

Are your really using ActiveSync or Mobile Device Center?
In bootloader mode when connected via USB, can you read "USB" on the Bottom of the Display?

to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.

ypsilonq said:
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
Click to expand...
Click to collapse
Opens activesync at the PDA and the go to connections settings. (menu->connections).
See if USB connection is selected there.
Cheers

thank you. I tried what you suggest but no change :-(

is the error you got when flashing the original HTC ROM?
if not download it from the official HTC site and then flash it using SD card flash (for more info about see the wiki)

finally fixed!!!!!!!!!!!!
I find original rom (t-mobile) and followed instructions from link provided by y_bother. big thanks !!!

[Q] Bootloader issue

Hi there,
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.

klumpbatsch said:
Hi there,
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, this issue has been known since the beginning of HD2 using win 7 or vista. There is a thread duscussing about that, but unfortunately I forget the link for that.
I also use win 7 64 bit and I experienced that too.
What I did to solve it was turning off my phone and leave it for a while (at least 5 minutes) and also turn off my pc.
After that i turn it on again the pc and the phone and plug the phone to different usb port. It works.
If you still have problem, you can try to reinstall windows mobile center.
goodluck

[Q] 1.54 spl and flashing

hi.i have a touch hd quite a while, and i though about flashing it...i read the two sticky threads, but no matter what,when i try to flash my 1.54 spl, via HSPLWrapper_Blackstone_156OliNex.zip , when goes to bootloader, i get a message in my pc and it says that its not connected etc. i updated my drivers (win 7 32bit), via the guide some1 posted,but no results... can someone help? am i missing something here? i tried to use hspl steps.. "Anything but 1.56.OliNex - go to step (HSPL1) on post 2"
r 1.13.25.24
G 1.56.00
when i went to bootloader says spl 1.54 .... any help??

First of all you have to verify that if you connect your device to pc via usb cable, WDMC (Windows Device Mobile Center) starts and recognize your Touch HD.

Proteusmega said:
First of all you have to verify that if you connect your device to pc via usb cable, WDMC (Windows Device Mobile Center) starts and recognize your Touch HD.
Click to expand...
Click to collapse
yes it is connected....when i connect the hd to pc , is connected to activesync directly,as the installation notes says to do.thats what i cant understand.
when is says that the stuff will take 10 mins, and is flips from WDMC connection, and bootloader shows up, it looses the connection there.
but when i generally open the bootloader, it says serial, and then when i plug the usb, it recognises it and it says usb...

Have you shutdown any firewall and antivirus?
If yes, try this:
1 - shutdown your Hd
2 - unplug usb cable
3 - start in bootloader
4 - connect usb cable
5 - start wrapper
If you have problem yet, try another usb cable

Proteusmega said:
Have you shutdown any firewall and antivirus?
If yes, try this:
1 - shutdown your Hd
2 - unplug usb cable
3 - start in bootloader
4 - connect usb cable
5 - start wrapper
If you have problem yet, try another usb cable
Click to expand...
Click to collapse
yes firewall etc all off..
i did what u said,also used the original htc usb cable...now i see the progress bar in my hd... but it stays at 0% ...and the wrapper says error 262
i noticed that when it says updating rom from ...{} to ... 1.56, the from is empty..(it cant read the rom i use...)
Edit: i did it..i used the original cable and all ok...it took 10 seconds.... not 10 mins..

paparoachh said:
i noticed that when it says updating rom from ...{} to ... 1.56, the from is empty..(it cant read the rom i use...)
Click to expand...
Click to collapse
no problem for this, first time I used wrapper I had the same empty field
Have you tried the manual SSPL?

Proteusmega said:
no problem for this, first time I used wrapper I had the same empty field
Have you tried the manual SSPL?
Click to expand...
Click to collapse
no i havent.. i think i've solved my problem for now...i used the original cable and all worked fine...i saw bootloader..says spl 1.56 olinex... so i think i am ok now ..
any stable rom?

paparoachh said:
no i havent.. i think i've solved my problem for now...i used the original cable and all worked fine...i saw bootloader..says spl 1.56 olinex... so i think i am ok now ..
Click to expand...
Click to collapse
Perfect
paparoachh said:
any stable rom?
Click to expand...
Click to collapse
Here on XDA you can find a huge variety of ROM for HTC Blackstone but I can't say which is more stable.
I have tried Energy 29022 Sense2.5 Cookie2.0 Jul.08, it's very beautiful but there is no volume control via hardware keys so I removed after one day of use.
Now I'm testing blackSTONEhenge™ HyPer with Manila 2.5 on my HD and It seem ok.
I suggest you to start with one of these, then search on XDA, look your favourite ROM and test yourself if you like it

I'm glad the paparoachh got this resolved, but please post any further flashing queries in The Dummies Guide thread rather than starting a new thread.
Thread closed

HTC HD2 USB drivers

Hello...
Where could I get USB drivers for HD2? I've searched all over the web and found nothing.
The thing is, that I can't get anything flashed onto it. I start it into bootloader mode (I have cotullas HSPL 2.08 version) and it says "Serial". When I connect it to the computer via USB it says "USB" but when I try to flash anything it just doesn't recognize the connection so it says that USB connection can't be found.
What to do?

[^IcEmAn^] said:
Hello...
Where could I get USB drivers for HD2? I've searched all over the web and found nothing.
The thing is, that I can't get anything flashed onto it. I start it into bootloader mode (I have cotullas HSPL 2.08 version) and it says "Serial". When I connect it to the computer via USB it says "USB" but when I try to flash anything it just doesn't recognize the connection so it says that USB connection can't be found.
What to do?
Click to expand...
Click to collapse
try different cable and usb ports.
Which OS do you have? Windows 7 doesn't need drivers, just plug and play.

Official HTC cable is the only reliable one, s spurious cable might work for charging but not for data!
Sent from my NexusHD2 using xda premium

If you have Windows 7, install Windows Mobile Device Center (WMDC) before flashing anything.