Hello, i pulled out the battery while the radio was coming on, now i have a mr. brick, not led, usb, buttons or whatever at all
So.. is there anyway yet to unbrick? what can i try after send it to service shop?
Related
I got my TyTN a week ago (actually it is a Softbank X01HT)
The device just died today. I cannot turn it on (battery was fully charged), no lights are on, I tried removing the battery, SIM card, soft/hard reset nothing helps, it seems like it is dead and nothing is turning on even when connected to the power.
Can anyone please advise? is there anything I can do to revive it??
thanks
Does it show a constant RED LED light when you plug in the charger?
Mike
Can you describe the incident that lead to the "bricking" of your tytn?
The more we know the better we can make suggestion/give help.
sagig said:
I got my TyTN a week ago (actually it is a Softbank X01HT)
The device just died today. I cannot turn it on (battery was fully charged), no lights are on, I tried removing the battery, SIM card, soft/hard reset nothing helps, it seems like it is dead and nothing is turning on even when connected to the power.
Can anyone please advise? is there anything I can do to revive it??
thanks
Click to expand...
Click to collapse
No light is on when connected, it is just all blank. I didn't do anything actually. Finished a phone call, put the device back in my pocket when I took it out again it was dead and coldn't do anything. No ROM change or software installation or anything. I was wondering if there is any way to "revive" it.
Thank you for the help in advance !
sagig said:
No light is on when connected, it is just all blank. I didn't do anything actually. Finished a phone call, put the device back in my pocket when I took it out again it was dead and coldn't do anything. No ROM change or software installation or anything. I was wondering if there is any way to "revive" it.
Thank you for the help in advance !
Click to expand...
Click to collapse
Don't think I've heard of one being completely dead before. There are cases where the battery drains very rapidly to zero charge in a veryshort time and will then refuse to charge. BUT in those cases the device at least shows a RED no charge LED when you plug in the charger.
I don't think I can suggest anything other than warranty / repair. I assume you can rule out that the charger is faulty. This could be shown by plugging into PC using USB lead and confirming that again no RED LED shows.
One final thought but I think it is a long shot and that is to leave the battery out for 10 minutes and then retry.
It may be possible that an internal connector has come adrift but unless you wish to open it up then again we're back to warranty / repair.
Mike
Bad news for me. I was afraid I will have to do that...
Thanks for the reply though.
If anyone else has ny suggestion I'll be happy to hear it
Hello. I have bought htc feeler totally dead. I cant go to the threecolors screen. If i connect it to the wall charger, usb . nothings happend. How can i repair this? I red something about JTAG. But what is JTAG? any BOX? can i make it at home? or i must buy it? please HELP
My name is carlos and im new in the forum.
This is my problem. I have an HTC Imagio. I tryied to update it but i fail because my phone wont turn on again. I dont know what can i do because I new in the htc world and I dont know how can I start.
Please heeeeeeelpppppp meeeeeeeeeeeeeeee
Please provide some more details: Does it power on at all? Is it stuck on a certain screen? Please describe what's going on.
Look, the phone doesnt turn on, it cant enter to the soft-reset or the hard-reset. When I pluged to the computer, I can heard an a disconected sound (like, when you disconect a usb). The computer recognize it as an a Damage Dispositive. I didnt try charge the battery in a universal charger yet, but thats it all the info that I can give you.
I hope you can have an a solution
So, have you tried to charge the phone yet?
When you plug it in, either to the wall charger or to a computer through a USB cable, does the little red light come on?
With the battery charged and turning the phone on, does it do ANYTHING?
If it truly will not do ANYTHING, you most likely DO have a dead phone - but this is not a common occurance.
when I had trying to charge the phone on the wall, the red light wont come on.
I think that I would like to try with a universal charger. Do you have any other method to fix my problem??
What did u flash? A Hspl or an rom/radio image? If u charge the batery with universal charger, and u pres volume down an power does the device enter in a tricolor screen?
Unbrick
Unbrick a phone just can be made with JTAG tools...
See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list
SolidCarlos said:
when I had trying to charge the phone on the wall, the red light wont come on.
I think that I would like to try with a universal charger. Do you have any other method to fix my problem??
Click to expand...
Click to collapse
Have you tried soft reset (red button next to the battery) and volume down? This should have take you directly to the ROM installation boot screen... or whatever they call it these days. If that does happen you can plug it into the computer and install the MR1 or MR2 update..
pcdphones.com/our-devices/products/56-xv6975
Hi Everyone,
sorry for my bad english, i´m a german user :laugh:
So my N4 does not awake anymore. No Power, Vol-Down+Power, Vol-Up+Power worked to awake the device. Only when i put the N4 on the Charger an press Power vor 10 secs a little red LED flashing vor 1-2 secs. I have to tried pull out the battery, dont work. I flashed the device back to stock and after i finished and reboot the phone.... NOTHING....
In Windows Devicemanager the phone will show as "QHSUSB_DLOAD"
Now it seems, i have a wonderfull expensive paperweight -.-"
Anyone have an idea to fix this?
Only way i know is to RMA the device
Send it to Google or buy jtag repair. I also did this.:crying:
Exact same thing happened to me and had to RMA.
Hi
I wanted to flash new ROM on my G900F. I have started to downloading new ROM ,in the meantime I have connected the phone in download mode to my PC (still waiting for ROM to be downloaded ,no any actions on PC ) but after few minutes phone shout down itself and now I can't power on at all . I took battery out for few minutes and have try again but nothing change .Where may be the problem and what is solution to fix it??
Thanks
Try holding the power button for 30 seconds, release, and try powering on normally
Battery charged?
Tried leaving it charging for 15 mins then trying to power it on?
OK. Thanks for your reply , will try
MrJelly17 said:
OK. Thanks for your reply , will try
Click to expand...
Click to collapse
EDIT:Still the same
MrJelly17 said:
EDIT:Still the same
Click to expand...
Click to collapse
Strange one, check the USB port on the phone, make sure nothing got damaged or bent in there
Try connecting the USB back in and out the phone a few times
Can't think of anything else atm, apart from the PC sending a spike to the phone and killing it
Tried connecting just the original charger and no battery?
thanks,still the same is it possible that phone is bricked?
It's possible of course, if it won't turn on, to me, that's a brick
Why it happened just sitting connected to the PC I have no idea, apart from that the PC killed it with a power spike somehow
Is it any way to unbrick?
The phone won't power on, so unless you know why, no
Take it to a repair shop / return it under warranty
Can't unbrick something that won't even power on
What about JTAG ? I can buy box if needed?
Not used a JTAG before, so you'd have to do some research yourself, but fairly sure you would need the phone to at least show signs on life / have power