Hi guys, I have quite a problem. I tried to downgrade my Typhoon from WM6 back to WM2003, but after I flashed new SPL I figured out I have locked CID and now when I turn on the phone it just goes to the bootloader and I can't flash any ROM because mtty says "Not allow operation !". So my question is: Is it possible to unlock CID only from the bootloader or flash any other ROM ? Thanks and sorry for my english.
I've got the same trouble since two years ago...
But nobody told me how to solve that, and my typhoon is almost dead...
If anyone has any idea, it would be great!!
Related
Hey all,
I am sorry posting the repeated question again, but this has a bit of a twist, and to this, i searched and didnt find any answer around.
My friends just bought a HTC P3300 from China. It came with a chinese DOPOD rom.
I had the original Shipped htc rom with me there so i upgraded my 1st friends mobile, with the shipped rom successfully, and then upgraded it to wm6 successfully.
now when i flashed my 2nd friend's device with the HTC Shipped rom, the upgrade process went to 3% and then the device just restarted and got stuck on the Initial dopod boot screen.
It is not moving from there.
So i downladed a couple of other roms, including the DOPOD ship rom,. but when i try to upgrade it, it says " ERROR:200, The Upgrade Software is outdated" kinda message!
now can someone please guide me how can i bring alive my friends rom, what is it i should do to successfully install some rom in it in English.
Please help!
thanks a lot!
Hi all,,
Please someone help me out with this problem...
Which rom should i try, or what is the problem with this?
Thanks a lot.
Did you cid unlock the hone either with USPL or IMEIcheck? If so, you should be able to load an OEM rom back on the phone. Try the HTC WWE WM5 rom or the German WM6...I dont see any reason why an unlocked phone wont accept at least one of those.
hi itschase...
No, i dont know if it was cid unlocked or not.
About USPL or IMEICHECK, nothign was done on it.
As i mentioned, one phone got flashed successfully, but the other failed!
I have tried the HTC WWE WM5 shipped rom, if thats what u are hinting to, but not the German WM6.
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
s
aaaaa
llllll
Insane Devil:
you need original rom for your device (with correct model id).
this should flash your device.
in the future, install uspl on your device before upgrading rom.
regards,
Factory Roms should be able to help u out in this...?
itschase said:
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
Click to expand...
Click to collapse
Good Idea but ... not correct!
Your device might be CID locked and you were able to run USPL from bootloader, because ... you already have had USPL. Am I right?
Hi, i have a HTCP6500 this arrived on my desk as a dutch version, and as im no good at dutch i thought i would try and upload an english rom to this.
I used oilpro's unlocking tool (the one you have to pay for) and it sim/cid unlocked the unit, i then tried to upload the stock english rom off the website, and i keep getting
ERROR [270] UPDATE IMAGE CORRUPT
noe the phone is stuck in bootloader mode i presume (the screen with red,green,blue,white displayed?
any ideas please
maybe
get a dutch rom and try flashing that..
should get you out of bootloader..
tell how you got on...
install the hard spl from sticky in this forum...
then you will be able to flash any ROM
I think what you installed from olipro was just sim / cid unlocker...
im not sure if it is hardspl
Is it possible to unlock the device (MDA Compact III) if all I get is the bootscreen with IPL, SPL etc numbers? I tried soft and hard reset and all that stuff I could find here, but none of those helps... I would like to try to flash it, but haven't unlocked it yet so I'm afraid I would brick the device.
All that remains is the three-colored loader, which I can enter without problems.
Any help would be apreshiated...
[ntn]
ntn_labs said:
Is it possible to unlock the device (MDA Compact III) if all I get is the bootscreen with IPL, SPL etc numbers? I tried soft and hard reset and all that stuff I could find here, but none of those helps... I would like to try to flash it, but haven't unlocked it yet so I'm afraid I would brick the device.
All that remains is the three-colored loader, which I can enter without problems.
Any help would be apreshiated...
[ntn]
Click to expand...
Click to collapse
Hi!
You have to read CID with MTTY and find the proper ROM to flash it back to life or you need to make a Goldcard with another WM device and put it to your device and flash it with an official ROM.
BR
Scootie
So far I have seen posts only about getting the original ROM and flash my MDA with it. Well, since I haven't been able to get the original ROM for my device, I'm trying to cook my own ROM with the same parameters the original ROM should have. So far no success....
In case anyone has T-Mobile Sk original ROM and could share it... It would make me really happy
How to read CID with MTTY ?
Thanx !
Hmmm yeah, i am also trying to Unlock CID of my T Mobile MDA Compact-III and then i will flash it later with WM6 ROM. Being a total novice in this field, i am going through all the posts to figure out how to unlock CID.
And i also could not find original ROM of ma device. The links in the forum are of some tm-phonedownloads, but his site is offline for a long time i guess.
Any ways if u get any luck then pls post here as well.
Hi All!
While I was flashing wapvirus' WM 6.5 build 23004 Titanium Neo Shadow last summer I did some mistakes and my Prophet got broken. I've flashed a NVID rom and I saved my lovely PPC . But some times I power off and power on (shutting device up not the screen) it locks down in cloudy Qtek screen or depletes its battery When it locks down I perform a hardreset and it opens. But I'm sick of this. Is there a cure for this? Please help this newbie
Edit: I used that NVID rom for a while and flashed Gullum's TNT v4.
No answer means my Prophet is dead?
Hi There
What do you mean by "mistakes" and have you performed a HardSPL especially after flashing the Qtek NVID.
The other thing to do is to use Lokiwiz 2b to unlock the CID (superCID)
This should give you a few starters or if in doubt have a deep read of the Wiki page.
I mean I did something wrong. I don't remember.
And I didn't performed a HardSPL before flasing rom or flashing NVID.
And thanks for your advise but Does CID unlock damage G4? There's an warning like "WARNING DO NOT PERFORM THIS IF YOU HAVE A G4 PROPHET (IPL/SPL 2.xx.0001)
" in Wiki.
Hi There
Okay forget the Lokiwiz for now as I was not aware your device was a G4 and make sure you flash the phone with a HardSPL before you do anything as not doing so has caused a majority of your problems.
Once you've flashed that then flash the phone with the Qtek NVID or another one I found that works just as well is the Orange WWE as this also contains a NVID. Once you have flashed the ROM it is vital that you perform a hard reset as this will solve most minor issues.
See how you get on with that.
So you say I should flash a HardSPL and then flash the Orange rom, right?
That's right make sure you flash the HardSPL before the new ROM.
As a precaution I always flash the HardSPL before installing any ROM, although you don't actually need to.
In fact I can't flash things to my Lovely Prophet 'cause I have to study hard (really hard) for a short time. Thanks for your help Dixiesmu. If I succeed or fail I'll bother you. Be sure of this.
HI all, dear rom creator,please help me to send back my shadow to life,recenty,it worked fine,but in another way,I've seen the wm6.1 update from t mobile and I've flashed it to my phone,I'm sure I've sspl and uspl before I've done it,but it seems that the file was corrupted when i've flashed it into my phone,and now,my shadow don't have any os image into it,it just hang on the stick together screen,I can do anything like hard reset,enter bootloader,but can't flash any over os into it including all t mobile shipped rom,so I think that it is cid locked because when I try to flash a rom,just 2% and none,please dear rom creator,what shoul I do?what can I do for unlocking the cid in bootloader?what solution can be found to my device???
thanks a lot,love htc phone...