Hi everyone,
i have a problem with the compass. Every time i start the programm "digital compass", the calibration screen that shows the "8" is only about half a secound visible, than the Programm shows "5812N", every time i start it.
Its possible to to force a calibration ?
Or another tool to read the data from the compass ?
Thank you...
Has nobody a hint for me ?
I only get this problem if i haven't used it for a while or something electrical is near. Other than that no suggestions from me
Related
Hi all,
I have my P3600 for only 1 month. The touch screen suddenly has no response without any reasons.
I have tried soft and hard reset but with no luck. Is there any hold button/fuction at the P3600?
Can you guys please help and give your expert advise.
Thanks.
Dennis
Anybody please.
The buttons are functioning just the touch screen had not any response
are you using a screenprotector?
ifnot youll probably need to rma it
You have notice that the menu start pop up with no reason?
Try to place the trinity in a very cold place and tell me if the touch screen function again.
I find that in a warm place some trinity simulates the press of the upper corner sx pixel, so in this case the touch screen not respond and the menu start pop up frequently.
i have this problem, my trinity open the more start menu and the screen not respose. Only recover this problem is remove the battery and wait more hour.....
I have this problem also, bring back to service centre and they said the LCD might me the cause of the problem, replace it under warrenty.
Could you post the S/N and the radio/rom version of the device with the "start menù" problem?
Unfortunatelly I have this same problem, I have read on the internet that when the trinity gets hot it does this because some parts of it extends and puts pressure on the screen top left corner.
I don't know how to fix it but it is a relief that I am not the only one having this problem. I don't know what the fix is but this problem basically renders the phone useless for me.
If anybody has resolved this issue with HTC please let us know.
I don't think it's a pressure problem on the screen.
I have the same problem also with the phone totally open and the screen free of the upper cover.
I have the same problem.
It's not a LCD Screen problem because i have replaced LCD screen with a new but it's the same problem.
Perhaps touch screen controller on motherboard or touch screen driver (dll) in the ROM.
I think it's linked with the following problem :
http://forum.xda-developers.com/showthread.php?t=290519
I have the same problem.
I repeat:could all you that have this problem post your serial number??? (exp,htc646...)
me too
My start button flashes too.
If I change the viewing mode sidewards, it is the calendar button that pops up all the time., and opens the calendar again and again. You can not control it anymore. Just X all the time. Seems to be software or ?
rom 1.23.707.6
radio 1.35.00.11
P 3600 Ger
sn HT648FK10262
maybe someone came help us.
thank you
seppo
seppo said:
My start button flashes too.
If I change the viewing mode sidewards, it is the calendar button that pops up all the time., and opens the calendar again and again. You can not control it anymore. Just X all the time. Seems to be software or ?
rom 1.23.707.6
radio 1.35.00.11
P 3600 Ger
sn HT648FK10262
maybe someone came help us.
thank you
seppo
Click to expand...
Click to collapse
how much time after the purchase?
did it start suddenly?
open and close,start menu
hi
i have rom 1.24 my problem is that the menu start .......is crazy
open/close open/close open/close i must remove the battery
i want a new ROMMMMMMMMMMMMMM
shuttle77 said:
hi
i have rom 1.24 my problem is that the menu start .......is crazy
open/close open/close open/close i must remove the battery
i want a new ROMMMMMMMMMMMMMM
Click to expand...
Click to collapse
I wonder if this screen problem is going to be a time bomb for everyone. I don't think it has anything to do with the new ROMs as it is a hardware problem.
I hope it's not like the peeling thing. One started complaining and ten days later everybody was facing the same problem.
DavidTwister said:
I repeat:could all you that have this problem post your serial number??? (exp,htc646...)
Click to expand...
Click to collapse
Could you explain for what you want to know serial number? This can help or just for statistics? Maybe then everybody will be glad to do it.
I bought the device on Feb 3rd,
and it started on march 3rd when playing a 'tetris like' game. It always opened the 'new game' button on the bottom left, while playing.
I must say, it does not occur constantly! There are times I use my p3600 and it is completly normal. But then just as from ghosts hand the task that is combined with the button in the 'left top corner' (upright position) starts to be pushed.
Seppo
[email protected] said:
Could you explain for what you want to know serial number? This can help or just for statistics? Maybe then everybody will be glad to do it.
Click to expand...
Click to collapse
Simple:i'm trying to understand if it's a problem of specified p3600,or if it's a problem that occurs randomly in all the p3600!
Ok. Lets collect same statistic but lets do it organized. For example my data.
Rom: 1.15.405.5 (HTC) - official (or modified by somebody)
Radio: 1.20.00.11
s/n: HT645FK08xxx
CID/SIM Unlock: No (or "Yes" if you did it and with which method - IMEI or FreeUnlocker)
Screen Protector: Yes ("Brando" mat for Qtek s110/S200)
Issue: "Start" menu pop up very seldom (seldom,often,very often,constantly) while I use stylus to scroll items of field "Play sound" of "Clock&Alarms" Settings, switch "iLauncher" tabs, play "MasterSoft Sudoku" (I list all places where I find out my issue) and I need to tap to "Start" or other place of the screen to close it.
I do not do CID/SIM Unlock and I do not reflash any ROMs. My current ROM is the ROM that was then I purchase P3600.
Hello. I have a Prophet (G4 model if is relevant) and the following problem:
Screen display resolution is like in Windows safe mode or 16 Colours. Something like this, the colours are distorted, i have only green and blue.
The phone is working, all functions are active but is no use if you can see the display as you should.
I want to know if there is a resolution display setting, is a software setting or a hardware error.
Can I do something to "repair" the phone ?
Thanks, Regards!
heh i had this problem once... it fixed itself...
I have this same problem aswell did you manage to fix this?
hi i have the same problem can anyone help us please
TRY WITH THE HARD RESET OR THE CLEAN STORAGE APPLICATION
_____________
HTC Wizard
g4
wm6 tnt 5.0
Any solution?
I own a S200 with the same problem, did you find any solution?
Changing ROMS and har reseting doesn't solve it
Thanks in advance
Solved!
The problem was a wrong connection of the cable that connects de TFT, a little hits in the area where the connector is supposed to be and... voile, the problem is fixed!! (until now)
Hi ppl ! My trinity is acting a little strange
It keeps trying to show in the same place battery Status and Time, you can see in the screen shots. Any ideas how can I solve this!? I've already install applications to show time,date or both but with no success.
Where can i change in registry this ???
This happens only in the main screen.
Regards,
Oclan
Did you try HTC Custom 1.7?
I've had a same problem until I removed HTC Home Plug.
After I installed new rom on my blackstone a new problem came out...
Time to time something hapens to my touch screen. It gets very very imprecise. For example, when I'm writing a SMS message I press the "V" button but then "G" is written on the screen... But this doesn't happen just when I'm writing a SMS but it happens no matter what I'm doing with the phone... Everything seems to be "shifted"/moved for about 1 centimetre upwards.
I made a hard reset and reinstalled rom but nothing didn't helped...
But it's funny because this isn't happening all the time but just time to time. Then I recalibrate the screen (voUp and voDO + tap the screen) and it helps for a few moments and than the same problem again. Then I'm doing the recalibration procedure till this problem vanish...
What is the problem, how can I solve it???
Please help because it is really annoying...
Hi,
May be that the change of Rom is only a coincidence?
It is not excluded that the touch screen of your blackstone can be a little damaged.
I have a pda that sometimes have the same problem, but I not updated any Rom to it.
Simply I stressed his touch screen with some abnormal pressure (I think).
thanks for reply...
It's funny because it works fine all day but suddenly you need to write a SMS or just answer the call, but that is not possible.
Well the screen might been damaged but it's weird because when I start calibrating the screen I tap the cross and it's not moved...
What can I do?
Same problem
I have same problem and I didn't make any ROM update. I didn't install any new software, but suddenly my screen started to be unaccurate and shifted somehow. calibration helps but after while it's shifted again. I was thinking about updating ROM, but if this is not a solution, then I don't want to ...
Well I send my phone to repair. They said that it was a mechanical issue so I think you should send it also due it looks like this is the only way to solve this problem. I hope you still have your phone under guarantee...
Oh and make sure whether you need original ROM or you may use the changed one, because in Slovenia you need stock ROM and no programs installed (like Garmin etc.). So the best think to do is to hard reset the phone and then send it to repair, so you don't have any problems...
Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.
I have the same problem, I need the touch calibration data to insert the cell regedit
Any body please???? I have the same problem aloso
looking for this too!
OOOOOH Yeaaaaah, I found the HTC Touch 3G (Jade) CalibrationData = "520,387 201,800 208,141 832,146 826,788"
Is ur problem fixed after inserting these values.
Sent from my HTC Desire using XDA App
Touch 3g caliberation details.
salmansaeed said:
Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.
Click to expand...
Click to collapse
Calibration Coordinates for Touch 3g T3232
527,519 209,847 219,159 831,188 839,848
To bypass screen alignment create Welcome.not file at the root of SD card,