Related
Hello
My tytn require a quite large amount of time to wake up and I was wondering if I was the only one in this case.
It may require from 2 to 4 seconds to recover from standby; I tried to phone myself and it took about one or 2 "tuuuut" (sorry, no better english translation for that word =)) before the phone began to ring; this is quite anoying because I have to answer very fast in order not to miss call.
The virtual keyboard used for inputing the code is also getting on my nerv; most of the time it start with the landscape layout (without any reason) and it take 2 sec to adjust to the portrait layout; during that time it is hard for me to input my code correctly because the size of the key is changing.
So, 2-4 seconds for waking up plus 2 seconds for keyboard adjustement is in my opinion quite slow. Am I the only one experiencing this? Are there fixes out there?
I also have some trouble with notification; it wake the device up! If the device is not password protected (only after 15 minutes on my phone) it start most of the time PIE (because of the hardware button). All this lead so to my second question: Is there a way not to wake up the device (at least the input) in order to avoid unwanted press on the hardwares buttons.
Thank you in advance !
fun_key said:
Is there a way not to wake up the device (at least the input) in order to avoid unwanted press on the hardwares buttons.
Click to expand...
Click to collapse
Settings -> System -> Key Lock -> When device is off: "Lock all buttons except Power button"
Thanks for your fast answer, i ll give a try!
Concerning the screen orientation issue I found out that it is related to the HTC case magnet.
EDIT:
In fact it was already configured like this; the device is not waked up by the hardware buttons, but by the notifications.
if you use the key lock you can avoid unwanted key presses. As for wake up times. I don't think anyone who has this device wants to admit that it takes to long cause they paid sooo much for it. However, I will admit that it does take a long time to wake up. I am comfortable saying this because its much like a turbo car, at first its not as fast as most naturally aspirated cars (turbo lag), then it blows their doors off. So it takes a couple seconds to wake up, then its faster then most other devices.
Later, Lew
Agreed. Coming from standby I get two rings of the "Old Phone" ringtone before it goes to voice mail.
I am hoping that new firmware will resolve this issue - my wizard was certainly more responsive when i presses the poer button to bring it out of standby. This is furthur delayed by the fact that i keep scabbling around the top of the device for the power button insted of the side!
pof said:
Settings -> System -> Key Lock -> When device is off: "Lock all buttons except Power button"
Click to expand...
Click to collapse
This doesn't help with the particular problem. What I think fun_key is trying to say is that whenever he gets a notification (for example when he gets a new sms message or a notification for a meeting) the phone will come out of sleep mode, so the key lock setting for "when device is off" won't be in effect. Instead the device will be powered up and accepting all keypresses, like the IE / Messaging- buttons, not to mention any presses on the screen.
I too find this annoying, and wish there was a way to make the phone go back to sleep after showing me a notification, instead of waiting for the default sleep time to go by. There are programs out there that have this functionality (for example MortSaver) though, so my advice would be to use those.
- Pud.0
thank for the mortsaver ip; i ll give a try!
Have exactly the same problems as fun_key (power button, keyboard in landscape, etc), and I suspect most of other people do. The wizard was definitely more responsive.
fun_key said:
It may require from 2 to 4 seconds to recover from standby; I tried to phone myself and it took about one or 2 "tuuuut" (sorry, no better english translation for that word =)) before the phone began to ring; this is quite anoying because I have to answer very fast in order not to miss call.QUOTE]
I've found a solution to the problem regarding the length of time before a call is missed (this is probably known by most people, I only found it after tinkering with the settings):
Start>Settings>Phone>Services(Tab). Choose Call Forwarding in the list, then click Get Settings. Change the 'Forward After' setting to a higher number. I changed mine to 25 seconds. Problem solved for me!
Click to expand...
Click to collapse
g00nerz said:
fun_key said:
It may require from 2 to 4 seconds to recover from standby; I tried to phone myself and it took about one or 2 "tuuuut" (sorry, no better english translation for that word =)) before the phone began to ring; this is quite anoying because I have to answer very fast in order not to miss call.QUOTE]
I've found a solution to the problem regarding the length of time before a call is missed (this is probably known by most people, I only found it after tinkering with the settings):
Start>Settings>Phone>Services(Tab). Choose Call Forwarding in the list, then click Get Settings. Change the 'Forward After' setting to a higher number. I changed mine to 25 seconds. Problem solved for me!
Click to expand...
Click to collapse
Glad your problem is solved. Perhaps others may find the following of note as well as your solution above:
http://forum.xda-developers.com/archive/index.php/t-258109.html
Mike
Click to expand...
Click to collapse
Hi team
I have the same issue, every time i turn my hermes on after its been off for more than say 30seconds it starts in landscape mode then switches to portraite mode, its driving me mad, at least i now know i am not the only person. maybe this will be fixed in the next rom update, fingers crossed aye
UPDATE: i also found this thread
http://forum.xda-developers.com/showthread.php?t=286552&highlight=standby+landscape
does anyone have any thoughts on his comments?
I actually think that the reply in the thread i posted above is correct,
My Hermes is an IMATE JASJAM (same thing of course) and i use the original belt holder that came with it, it has two (2) magnets in it to keep the cover shut, when ever i get a msg and i pull it out of the case (turns on automatically to show me the msg) its always comes out in landscape mode.
I turned my phone on and passed the cover with magnet side down over the phone and sure enough as i did that the screen changed from portrait to landscape mode, thus confirming its the magnet that causes it and not a defect with the phone.
hello all. Im a use rof an old spv. and just got my new HTC HD2
a few questions if i may? i can't figure out and ive been trying since last night, i've searched google high and low as well and called tmobile.
1. the phone when it dims and then goes to sleep, i have to always press a hard button then slide the lock to unlock... is there away to disablehaving to press a hardbutton? it gets really annoying having to press ahardbutton every minute when the phone goes to sleep!
2. when the phone dims after 10 seconds is there a way to set it up so that your first press just undims the screen and doesnt actually press whats under neath it?
3. ive read all over google about the gesture feature, ive asked tmobile. and i cannot get my phone to do any gestures what so ever. ive download and installed the shake and wake and still nothing. i download a program called pocketshield and that completelly locked me out of phone becuase when i shook it it wouldnt turn on i had to take off battery wait a minute and then replace the battery then uninstall the app.
4.the media players.. ive tried coreplayer, windows media player, pocketplayer, the one that plays the most files is coreplayer.. ive noticed in fullscreen mode there are no buttons? everytime i tap the screen ti brings me back to portrait view... is there any recomendaions for a player similiar to core player that has controls on the big screen in landscape view? and that offers all the features coreplayer does? eq, visualizations, plays as many file types etc...
5. ive looked everywhere on how to change email icons the envelopes.. is there away to change those or do we just have to remember the order of the email icons?
thanks for any help or light you guys can shed! i really hope some of these issues can beresolved. i feel ive exhausted my xda,google searching, and phone settings searching.
1. It would consume lots of battery power to constantly monitor the touch screen. You can increase the amount of time before it goes to sleep.
ok i'll just have to deal with it an dwill raise the time.. ty for reply.. anyone else on the other questions please?
TY in advance
could anyone one confirm that the hd2 from the usa allows for shaking? ive rest phone and it doesnt work called tmobile and they have no clue! i'd liek to get me phone to be able to work with gestures.
Thanks
let me rephrase. does anyone know if the htc hd2 has... Windows Mobile phone with a tilt sensor / accelerometer/ g-sensor. or the ability to shake it and it will wake up?
thank you
It has an accelerometer, but there's NO shake to wake up.
Only way to wake up is to press a hard button.
5. if you mean the dirrerent e-mail accounts in sense, when you press on the "slider" that's on the active account and drag it, its expands to the left and shows the account name.
ok.. then what about the posts here about shaking it and tilting it? and what about pocketshield saying that you can shake it, and this link as well?
http://www.mobinauts.com/topic/110094-shake-to-wake-up-your-htc-hd2/
thanks for your reply!!!!. it's like pulling teeth in this forum very tough to get replies!
Apparently the shake to wake is a somewhat "experimental" add-on someone on here made and abandoned, works for some and not for others... nothing official, normal that tmo have no clue about it.
No idea about pocketshield, haven't read reports about that particular function on the HD2. Not very popular apparently, so you'll have to try yourself.
TMO support will help you about what was on your HD2 when you got it, nothing else that you'd install later.
thanx for reply.. well that pocketshield can be dangerous for some.luckily when ya replace battery it brings back the default slider. otherwise people would be locked out of there phones.
one last question and i promise to stay away for awhile.
how to u turn your backlight back on? example you have it set to dim after a minute. and your app. is there a way to undim the phone? instead of clicking on the screen or touching a button and it recognizing your touch and undimming it and selecting whatever you touched? i'd liek to be able to just touch something and it would undim and not select something underneath where i touched.
thanks
Not that I know of. It's been so with every touchsceen device I've ever had, need to either press a hardware key, which usually will do something too, or touch the screen and try to tap in an empty place.
Personally I don't use dim, I've set both dim and turn off to 1min.
xtacybyme said:
it's like pulling teeth in this forum very tough to get replies!
Click to expand...
Click to collapse
That's because this is a developers' site, not a phone support forum.
Discussions are for developing programs, apps and other fun stuff.
If you want tech support there's many forums out there.
You should not be asking questions on here, about how to use your new T-Mobile HD2. I'm surprised your thread has not been locked.
xtacybyme said:
hello all. Im a use rof an old spv. and just got ... i download a program called pocketshield and that completelly locked me out of phone becuase when i shook it it wouldnt turn on
Click to expand...
Click to collapse
Of course it won't turn on by shaking, phone must be ON for any gesture to be recognized. It is the hardware nature of these type of phones(you always need to press the hardkey, unless it is the phone turning on by itself).
Now, if you meant it didn't unlock when shaking after power on then maybe your g-sensor is not calibrated or you were doing the movement wrong. Take a look at minute 1:20, see how the movement is done:
http://www.youtube.com/watch?v=47BFSLnmBLI#t=1m20s
thanks for replies i was away out of town.
That's because this is a developers' site, not a phone support forum.
Discussions are for developing programs, apps and other fun stuff.
If you want tech support there's many forums out there.
You should not be asking questions on here, about how to use your new T-Mobile HD2. I'm surprised your thread has not been locked.
Click to expand...
Click to collapse
there were many others here asking for help so i thought i could. my apologies. i will search and post elsewhere.
Of course it won't turn on by shaking, phone must be ON for any gesture to be recognized. It is the hardware nature of these type of phones(you always need to press the hardkey, unless it is the phone turning on by itself).
Now, if you meant it didn't unlock when shaking after power on then maybe your g-sensor is not calibrated or you were doing the movement wrong. Take a look at minute 1:20, see how the movement is done:
Click to expand...
Click to collapse
i did tap the hard button first and then tried the shake movement, and i was locked out. i will redownload pocket and give a fair chance again by following the movement given in the video you posted.. thank you for the explanations guys.
I have searched completely throughout this site and over on the tmobile hd2 forums to see if i could find any information on a resolution for this. I noticed a couple days back that the call screen wasnt working but all I was trying to do was to hang up the call. I just used the end call button instead. Today i was trying to make a payment through one of the IVR systems where I had to bring up the dialing pad and I was unable to. I have the stock tmobile wm with cookies home tab on top of it. Pardon me if this topic has already been addressed.
Same here
I too have the same problem. But i notice if i press the keypad button during call for a while, the keyboard eventually comes up, but not all the time. Any one with any suggetions?
turn off the 'increase tap time' tweak in bsbtweaks, (or remove the cab if you set that tap time tweak with a cab.)
That was it! Thank you, kind sir!
samsamuel said:
turn off the 'increase tap time' tweak in bsbtweaks, (or remove the cab if you set that tap time tweak with a cab.)
Click to expand...
Click to collapse
Yep that's it. I had to play with it for like 30 minutes 2 weeks ago before realizing that was the problem
Is was driving me crazy for quite a while. Now, the problem is gone.
Thanks !!!!!
My back button on the front capacitive screen won't respond the first time, I have to keep on hitting it until it registers. Anyone else have this issue?
I did some research and found out that the Vibrant was having the same issue with their home button.
Those buttons are my biggest gripe with the phone. You have to REALLY FREAKIN press on them. On the Evo, you just need to touch them lightly. I really love the bottom buttons on the evo. With the epic, touching them doesn't work. You need to press. Sometimes more than once. I also end up accidentally long pressing just to get it to work sometimes.
Samsung needs to learn from HTC and fix their buttons.
hydralisk said:
Those buttons are my biggest gripe with the phone. You have to REALLY FREAKIN press on them. On the Evo, you just need to touch them lightly. I really love the bottom buttons on the evo. With the epic, touching them doesn't work. You need to press. Sometimes more than once. I also end up accidentally long pressing just to get it to work sometimes.
Samsung needs to learn from HTC and fix their buttons.
Click to expand...
Click to collapse
N1s capactive buttons suck too, its HTC.
hydralisk said:
Those buttons are my biggest gripe with the phone. You have to REALLY FREAKIN press on them. On the Evo, you just need to touch them lightly. I really love the bottom buttons on the evo. With the epic, touching them doesn't work. You need to press. Sometimes more than once. I also end up accidentally long pressing just to get it to work sometimes.
Samsung needs to learn from HTC and fix their buttons.
Click to expand...
Click to collapse
I thought it was just me with the button thing. U actually have to press instead of just tapping it like on the evo
Sent from a FRESH EVO using xda app
It is not just you. Some are genuinely faulty. I see this being hte first major defect of this device. The back key on some seems to be worse than the search, home and menu keys. I had to replace my first Epic because of it.
I'm dealing with this, and the battery charging issue.
Ya I bought six epics for my whole family today. 4 are fine and 2 have back button issues. To the point where on one I have to push down severly hard. I am taking it back tommorow and going to see if they can swap it out.
I hope mune is not like this when I get it
My issue is with the MENU button and I notice that the feedback is the strongest on the HOME button. Sounds like the Epic is going back tomorrow.
This can probably be fixed with a software patch. If its common among all galaxy s phones, im sure samsung will issue a patch for this.
Gosh, reading all these post and trolling irc as the day wenton, I'm gad to only suffer the biggest problem of the epic, not being able to put it down! And maybe the spacebar, lol.
Sent from my SPH-D700 using XDA App
yea the ones that work are awesome... but the back button is unusable at all on 2 of mine so gotta get them replaced. Hopefully they still have a few left.
Yeah I noticed that too, it is inconsistent sometimes with almost all of them.
Sometimes you lightly tap it and it goes and than other times you will do it 3-4 times before it goes.
anyway to set the bottom buttons (back, home etc..) to be lid longer time?
Possible Solution: I do not have mine yet, but this is what I noticed from watching the reviews. If the lights are OFF on the buttons you need to press them more than once. If the lights are ON they will be responsive.
The light timer is linked to the keyboard backlight timer. Increase the keyboard timer(in settings) and the buttons will stay on longer as well, 30 seconds should be a good setting.
Again, I do not have my phone yet. Can someone with the issue please confirm this is a proper solution?
Pops_G said:
Possible Solution: I do not have mine yet, but this is what I noticed from watching the reviews. If the lights are OFF on the buttons you need to press them more than once. If the lights are ON they will be responsive.
The light timer is linked to the keyboard backlight timer. Increase the keyboard timer(in settings) and the buttons will stay on longer as well, 30 seconds should be a good setting.
Again, I do not have my phone yet. Can someone with the issue please confirm this is a proper solution?
Click to expand...
Click to collapse
"Increase the keyboard timer(in settings) and the buttons will stay on longer as well, 30 seconds should be a good setting."
worked like a charm, thank you
Back Button Issue
Got my Epic on 8/31 at about noon. I spent about 4 hours setting it up and did not even try making a call (except for one very short call). While working on the setup I noticed I had to hit the back button anywhere from 3 to 5 times and sometimes I really had to press hard.
Once I starting making calls with it I noticed that it had a lot of static and each call made it worse. Took it back to Sprint and got a new one. The new phone has NO issues with the back key!
Makes it seem like a hardware issue.
tsp
Pops_G said:
Again, I do not have my phone yet. Can someone with the issue please confirm this is a proper solution?
Click to expand...
Click to collapse
Unfortunately most people having this problem are having it when the lights are on. A lot of people have returned their epics already due to the buttons on the bottom....
I am having the same problem with the keys, they all need to be a lot more responsive. The back key is the worse.. Sometimes I have to press it 10 times for it to work.
vooman said:
I am having the same problem with the keys, they all need to be a lot more responsive. The back key is the worse.. Sometimes I have to press it 10 times for it to work.
Click to expand...
Click to collapse
I find that when i stop for a second and then press it good and hard, it works. I don't like that... but it never completely fails on me.
I hope they fan fix it so that you just need to slide your finger over it to make it work. That's how the Evo is. I think everyone would prefer that.
Okay I wasnt going to post about this cause there have been way too many posts and alot of back and forth and debates and even flaming, but I stumbled across something that I think is the cause for MAJORITY of the issues with why we keep having this happen. It Happened to me Today, and I Found the cause.
Before ANYONE Flames me for bringing this up, READ the post, Remember I solved the cause of why it happens to most of us, I dont take responsibility if you choose to take it upon yourself to fix it! And I know 90% of the users are going to tell me I'm wrong or I dont know what I am talking about, so be it.
If you have nothing to add other then flaming the post, just hit the back button and be on your merry way and pretend you never saw it. But I am 98% sure I am right about why its happening!
So if your interested read on:
I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
I completely agree with you. I've had the "dead digitizer" since December. It was pretty apparent it was a hardware key problem, as I could generally solve the issue by pressing the "Off" button to turn the screen off, and then one of the other keys (usually the back button, but occasionally one of the others) to wake the screen up, and the digitizer would be alive again.
As I am still under warranty, I sent mine off last week, and expect to hear back within a few days. But if I had the confidence to open it myself, I was sure it would be fixed with a good clean.
Anyway, thanks for crystallizing all this into a post. Thanked!
THANK YOU SO MUCH FOR THE INFO. i have had so much trouble with unresponsive screen after installing typhoon 2.6.3 and it from holding down the red button all the time for install and the past millions times for everything else.
Thanks for the heads up
Sent from my HD2 using XDA App
U maybe be right about why this issue happens but if u rely on other key then will also wear out soon ...
What I did is I remapped my volume up n down keys to power and back button which I believe are the most used in android and then found a app to manage my volume in android that way I don't lose my sound on rhw phone
Also I went ahead and got a another app which places virtual buttons on ur screen so u can use then instead of the actual hardware buttons
For button remapping
get the BUTTONREMAPPER for android and for on screen android buttons get BUTTON SAVIOR
hope this helps
Sent from my HTC HD2 using XDA App
Good to know... will now wake my phone up with the green key as its hardly used in Android. Button Savior is a great app, been using it a while now. Took a bit to retrain myself to not use the back key.
Sent from my HD2 using XDA App
i'm going to agree with your hypothesis or at least suspect that dirt is probably a bigger factor than most people think in these cases. i just bought a non-responsive phone today and while i stuck my nail (yes, i should probably clip them) around the edge, in between the screen and housing, i was surprised to see just how much dirt was in between that crack. same with the area around the buttons; there's a lot of grime there.
since i just got the phone i haven't even opened it up but the first thing i'm planning to do is give it a good interior clean around the buttons for sure as that seems to be the sensitive spot. touch screen devices are very delicate and the micro particles of dirt which build up over time probably create a hazard that people really don't really anticipate. compound that with having to mash on those buttons all the time probably crams the debris in there even tighter.
i'll attempt to clean and check the contact as you suggested and will report back if it helped in my case.
About hardware keys:
I don't use them at all, only for wake up the phone (it can be wake up with any key)
There is an app in market called "button saviour" it's just excellent app to keep your hardware keys for a long time
AngelDeath said:
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
Click to expand...
Click to collapse
You just hit d nail on d head pal...My HD2's touchscreen also stopped responding and nothing i did (software-wise) worked...i flashed several WinMo ROMs and Android builds with no luck, till i read somewhere online dat some guy seemed 2 solve his touchscreen issues by installing "CleanRam", ran a level 3 clean up (use MyMobiler for this) and by pressing real hard on the red end key button..I did just dat and voila it works!!
I have a Tmobile HD2 which is no longer covered under warranty and i'm not willing 2 part with almost $200 here 2 have d whole lcd & digitizer replaced...I recollected dat in d forum i read the suggestion from, a lot of ppl came n posed their views on why it's not possible but i tell u it is cuz it worked for me..Nw i'm comfortably dual-booting WinMo & Android via sd. i use "button savior" and "extended control" to navigate and power down/reboot respectively.
Hweva i believe its not a permanent fix as it simply refuses 2 allow me run android full-time thru MAGLDR, & i think i know y..pressing down on d end button 2 launch MAGLDR/CWR options after install messes up d connection with d digitizer underneath and d touch screen thereby causing it 2 fail again when android boots up....I just might try opening it up myself n cleaning dat area up as u suggest but dat'll be when my current fix fails cuz as d saying goes "If it aint broken? then don't fix it"
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
AngelDeath said:
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
Click to expand...
Click to collapse
Hmm...i don't use d app but from wat i can gather on d dev's thread, you would have 2 remap ur volume keys to "Power"...Also checkout dis review 2 learn hw 2 mk d remapped button work even in sleep-mode.
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
CaCtuZ123 said:
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
Click to expand...
Click to collapse
If I'm to base how the HD2 is setup internally, they wouldnt replace the buttons, they would replace the contact or contact board under the buttons, remember the buttons are like a keyboard, they dont wear out, its what they push on that gets dirty or worn.
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
pauloviegas said:
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
Click to expand...
Click to collapse
Yeah HTC screwed up on dat...its just as said,1 has 2 be careful n avoid using d red end key button as much as possible 2 enable d device last much longer...And if u do ave 2 use it, press on d left-most part of d key (closer 2 d back arrow button) to get d job done.
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
big3d said:
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
Click to expand...
Click to collapse
Can that be done with other roms? And wouldnt a shortcut or a widget on the main screen also work?
on1ydabest said:
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
Click to expand...
Click to collapse
It all depends really Understand that not all HD2's go thru the same testing process when it comes out of the manufacturer. Also take into consideration that it also depends on how often you flash a rom, if your flashing a rom every day or every week expect that you will shorten the life of the end button, also it doesnt always mean that the button is bad, it could clearly be dirt underneath that could also be causing the issue. And I said the same thing when I saw posts about people saying that android killed their screen. I even responded to it but always maintained it was hardware, even though I didn have the problem, and I bought both my HD2's used in Dec. and the day it happened and I found out why I posted this, if I was to guess, I would say that I probably flashed both my HD2's close to 200 times with different roms, or upgrades, or testing fixes out.
So if your not a flash nut, then your probably safe. There are many factors that can play a role in the end button life cycle, And no two people use their HD2's the exact same way.
the non-responsive touchscreen problem happened to me this morning. I woke up trying to unlock my phone only to find that it would not respond to any touch gestures. I was however able to uninstall HSPL and Flash the stock WM6.5 rom since I was going to T-Mobile to get a replacement. When I took it to T-Mobile the employee resetted the phone by holding the 2 volume buttons and the power button then somehow the touchscreen started to respond to touch again. I was completely puzzled as I thought it was for sure a hardware problem. But now I'm going to flash Android and hopefully the problem will not arise again, if it does, back to T-Mobile I'll go!
What Android really needs is some sort of "X" button, or even a widget on the main screen that you can just tap and put it to sleep. The three most keys used in my opinion is the windows key (Apps that use it for a menu), the back key (Since there is no damn close button), and the end key (sleep, flashing, booting to magdlr).
Some one had a concept here of buttons that looked very similar to The desire HD, the greatest thing would be if someone could make the bottom of the htc sense (app drawer, phone, and the personalize) auto hide and have the desire HD buttons come up with a power button at the end and this way if you hit menu it would bring up the original 3 button screen.