Database Users

INSTALING .cab FILES!!!! HOW YOU DO IT...IM NEW TO THIS LOL

hi guys i recently posted a topic on o2 gprs probs. i have found the settings and downloaded them in .cab formatt. but how do i install them on to the fone or if not what folder do they need to be in?

i have placed them inthe ppc files directory and clicked to install bu it displays a message sayin they cant be installed.

cab files can be installed from any location
if they will not install maybe their are currupt
or for another cpu type then arm or xcale

i used the cab files from this forum. does anyone have the .cab files for XDA2 on o2 uk payg? would be a great help

here is where i got them. which 1 i need? and what i got to do wiv it?
http://forum.xda-developers.com/viewtopic.php?t=13498

done it lol, when i was dl the .cab file it displays on my PC as a winrar file so i was automatically extracting the files (all six of them lol), realy all i had to do was put the Downloaded file straight onto my XDA lol. dummm asss

i'm glad you got there in the end :lol:

...
Well the .cab files are the installation-packages for WinMobile. You need to transfer this .cab file direct to your device(or card) and via any file-exploring software start this .cab. The installation should be started. If you get an error,there can be few problems:
1.The .cab installation is for other processor type
2.or is it for a Smartphone device(PPC and SP are uncompatible(well WM5 has better compatibolity))
3.The .cab can be corrupted.
Now I want to say,that this direct in-device installation has some bad properties:
1. The .cab file is automatically deleted after installation(when your .cab isn't read-only)
2.The system install the software into a default folder only(\Program Files)-you cannot choose your own destination such as Storage,Storage Card etc..
This bugs solve this utility(below). I really recommend that.

extraxting a cab file from an exe file

in paticular i want the cab file for MorphGear. how do i do this? I have tried using cabinst but that doesnt seem to do anything

Some ".exe" are extractable with a soft such as "Winrar" :wink:

if that doesn't work then try the following.
1. Remove app from you computer and device
2. Disconnect device from comp
3. Run exe for app
4. When you see the message "this app will be installed on next sync" go to start---search
5. look for *.cab that was created or modified today and is less than 1MB (change file size to whatever value you think is appropriate)

Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?

chrisredmayne said:
Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?
Click to expand...
Click to collapse
Can you install Activesync tho, dont have to sync just get it to install. If you can than run the morphgear.exe and after it says it will install on the next sync, go to C:\Program Files\Microsoft Activesync\ and you will see a Marat folder, the .cab is in there. It will almost always make a new folder and put the .cab of the program you are install into the Activesync folder, if it is not there than it created its own folder under Program Files and the .cab should be in there.
Just because im bored I downloaded this MorphGear.exe
http://dl.filekicker.com/send/file/155967-7256/MaratSetupPPC2003.exe
And have attached the .cab that was put into my ActiveSync folder for you.

wow thanks that was very nice of you!
i checked that folder and there was about 10 different morphgear files that id been messing about with! And they worked! Well chuffed i am

Is anyone playing gameboy games on it? On the website listed in the first post the module (MaratSetupPPC2003.exe) leads to an invalid link. But i found it on xda http://forum.xda-developers.com/showpost.php?p=904167&postcount=5 i installed it but it only wants to see snes roms

installing tcmp4 on XDA IIi

Hello
I was trying to install tcmp4 on an XDA IIi, i downloaded tcmp4 onto the storage stick of XDA IIi, and clicked on the tcmp4, i get the message
'tcmp4' is not a valid Pocket PC application
i am sure i downloaded tcmp4 onto my XDA Exec in a similar way.
can you guys help me?

hello again
i figured out what to do, rather i remembered what i had done with my xda exec.
it is just the same procedure, get the cabinst file, and use it to install the cab file for the arm version

dear XDA_Guy
installing any application in Pocket PC can be either
1) exeutable file : which extention is .exe
these files (mostly and I say mostly) installable via the PC using ActiveSync program installed.
2) .cab file and these file shall be copied directly to the pocket PC and installed by clicking on them
Most program supplier (or programmers) produced the 2 vesrion of there programs i.e. in Cab and Exe format
the good thing with the cab version that you can keep in the SD card and everytime your hard-reset ( or format ) your XDA your can easly restore the programs from the SD (cab file ) without a computer.
IMPORTANT NOTE : about cab file ... most pocket pc or Windows CE deletes the cab file automatically after installing them.
to prevent this you need to install other cab installation utility / program.
personally I use the attached program. its exe file but just copy it and place it in your my documents or any other location . ( this is exe file but its a pocket pc exe file not PC )

dear XDA_Guy
installing any application in Pocket PC can be either
1) exeutable file : which extention is .exe
these files (mostly and I say mostly) installable via the PC using ActiveSync program installed.
2) .cab file and these file shall be copied directly to the pocket PC and installed by clicking on them
Most program supplier (or programmers) produced the 2 vesrion of there programs i.e. in Cab and Exe format
the good thing with the cab version that you can keep in the SD card and everytime your hard-reset ( or format ) your XDA your can easly restore the programs from the SD (cab file ) without a computer.
IMPORTANT NOTE : about cab file ... most pocket pc or Windows CE deletes the cab file automatically after installing them.
to prevent this you need to install other cab installation utility / program.
personally I use the attached program. its exe file but just copy it and place it in your my documents or any other location . ( this is exe file but its a pocket pc exe file not PC )

thanks for the reply nasoor
you mean that the cab file version are meant to be installed on sd cards
and the exe version is meant to be installed on the device itself by clicking on the exe while the exe is on the pc?
how do i use the active sync program to install an .exe file? i copied the .exe file to my sd card and accessed it through activesync(explorer) however by only clicking on the file, it only gives me the properties

yes ,
the cab files should be copied either to you SD card or to the Pocket PC using the activesync explorer.
the EXE file should be run directly from the PC not the XDA. the steps are :
1- Put your XDA in the cardle ( holder) which is connected to the USB.
2- wait for the syncronization process to finish
3- go to the EXE file for TCPMP program in your Desktop Computer
4- Run the file and follow the instructions to be installed
5- after finishing you will see your XDA doing some progress and copying
6- You are done enjoy
regarding the cabinstall_en.exe file for cab installation , even this file is an exe file but as I told you before you can just copy it to your SD card and run in the Pocket PC not the Desktop because this is a Mobile EXE file.
I hope you are fine now ..

thanks for the reply nasoor
is there any way to know if a a file is a mobile exe file or is a pc exe file?

actually , without a programmed tool or external tool you can not
I mean , the only way - as I think - is by try executing the file , if the file fails to run with an error messaage says ' The file is not a valid 32 bit application ' then it means that this is for Pocket PC
otherwise , it will run , then it should be ment for the Desktop or Windows XP /ME application

thanks for the reply nasoor
pocket pc's are 32 bit applications?

issues installing S2U2

Okay it says its a cab. While I am very new to wm phones I have been able to install a ton of other cabs.
When I go to install this fist off it doesnt look like a cab it has the name and the windows flag and .rar as the extension.
When I click on it I get the following.
There is no application associated with "s2u2-0.3-WM5". Run the application first, then open this file within the application.
This is supposed to work with WM6 and I know others here have done it. I am just not so bright when it comes to this and cannot figure out what I am doing wrong. I tried just copying it into the windows folder but that didnt work either.

You have to extract the rar file to get the cab file inside for installation. Pls try again.

thanks
thanks mate works like a charm

Any App For Changing .Exe to .Cab ? ? ?

is there any program to convert .exe to .cab ?
i don't want to use pc for installing files like that .........

what i do,.... use the exe in your pc without the pda,... activesync will try to install the app in the ppc,... dont't touch it....
Go thru my pc to the folder where activesync is installed,... there you will see one folder named usually like the app you wanna install,... open it and you will see the cab ,... done....
Excuse my english ,.... thanks

I've never tried it myself, but presumably the CAB file is just wrapped up in the installer so you can probably open the EXE using something like WinRAR and just extract the CAB file from it yourself.

There is no general solution for this.
In most cases the CAB files are inside an installer EXE. The possibility and effort to "extract" the cab varies depending from the EXE (there are many different packers and installers on the market).
Some of them can be opened with packers like WinRAR or 7zip, others can't.
There is one thing they all have in common: the CAB has to be (temporary) installed onto your harddisk. This might be under "Programm Files\Software Vendor\", ActiveSync directory or an temp directory, for example "C:\Documents and Settings\<user>\Local Settings\Temp\<subdir?>" in Windows XP. In some cases the CAB will be deletet when the setup programm ends.
So, unfortunately, there is no generic method to extract the CAB.

open the exe in winrar or a similar archiving program and look for the cab (probably a jumbled up name, though still has the .cab file extension)

just extract the EXE using winrar and copy the CAB file in there to your mobile device.