hey guys has anyone else had problems doing the first step with the android SDK. I always fail during when in CMD after I do the AndroidSDK/tools/ adb devices
i get the error of
** daemon still not runningerror: cannot connect to daemon
Did you run it with admin rights?
how would open cmd with admin rights? all I know is search cmd
ok ran cmd with admin rights now my new error is
ABD server didn't ACK
*failed to start daemon*
BrianDigital said:
ok ran cmd with admin rights now my new error is
ABD server didn't ACK
*failed to start daemon*
Click to expand...
Click to collapse
I am assuming you are using Windows. If so, did you install the driver?
chuckhriczko said:
I am assuming you are using Windows. If so, did you install the driver?
Click to expand...
Click to collapse
its odd, I was following the unlocker setup, and no the drivers didn't install on their own.
I used the USBDeview program, I didn't even have any htc drivers installed so after I just went to devices in windows and uninstalled all the drivers there. I then was able to install a driver for the dream and thats where I am at now.
BrianDigital said:
its odd, I was following the unlocker setup, and no the drivers didn't install on their own.
I used the USBDeview program, I didn't even have any htc drivers installed so after I just went to devices in windows and uninstalled all the drivers there. I then was able to install a driver for the dream and thats where I am at now.
Click to expand...
Click to collapse
Ok. Well there are a couple guides here for doing it, I dont know if they will help but it can't hurt to read them anyway. If the driver is installed properly from the ANdroid SDK then you should be able to adb no problem. Also make sure you go to settings->Applications and make sure USB Debugging is on. That must be on for adb to work.
yep thats done too, Maybe a hard reset would help?
ok well nothing guess i cannot root, super
got it did on my girls 32 bit win7 and it worked
cool but I cant do anything from comp
Related
I tried installing the latest builds of Haykuro into my G1, they install fine however I lose adb I keep getting "error: device not found" when I revert to the latest JesusFreak build it starts working again just fine, any ideas why? Thank you in advance.
Sometimes adb.exe stay open in windows process close it reboot your phone and plug it again all is good.
did this fix it?
If not i updated to the new spl and got the new drivers and now adb works fine.
I am using Windows 7 64bit... I could get ADB working one time, and two mins later not at all.
I found this "tip" in a prior thread and I cannot remember who to credit (sorry).... but this worked for me last night without a problem....
When you reboot... hit F8, and scroll all the way down and disable Digital Driver Signing.
After I booted ADB was working great.
Thank you all
Thank you for all your responses I will try them tonight =]
Do0zman said:
did this fix it?
If not i updated to the new spl and got the new drivers and now adb works fine.
Click to expand...
Click to collapse
quick question can u point me in da right direction for the new adb driver....ive searched cant find it
im still getting the problem ive tryed disable driver signing uninstalling reinstall drivers reboot after reboot process kills. And stil cant mount adb. Vista Ultamite 32 bit with update drivers from haykuro
jmotyka said:
im still getting the problem ive tryed disable driver signing uninstalling reinstall drivers reboot after reboot process kills. And stil cant mount adb. Vista Ultamite 32 bit with update drivers from haykuro
Click to expand...
Click to collapse
I'm trying to get this to work also. I have Vista Ultimate 32 bit, where is this new driver that i've read about?
I7oobie said:
I'm trying to get this to work also. I have Vista Ultimate 32 bit, where is this new driver that i've read about?
Click to expand...
Click to collapse
Its in the driver package, just unzip it to C:\ then plug in your phone, go to device manager and look for Android Device, then install the driver from that folder on C:\
works for me and im on XP Laptop and an Vista Ultimate X64 Machine
Dantehman said:
Its in the driver package, just unzip it to C:\ then plug in your phone, go to device manager and look for Android Device, then install the driver from that folder on C:\
works for me and im on XP Laptop and an Vista Ultimate X64 Machine
Click to expand...
Click to collapse
Thanks for the response. I could've swore I've done that, but maybe I'll try it again.
I have my 2.1 DamageControl ROM running fine (thx damage!). I'm just trying to connect to adb. I'm on win7, 64bit.
I used to connect fine when I was on fresh 1.1.
I thought it was b/c I had an outdated sdk, which I did. I upgraded from v3 to v5, and made sure I downloaded all the latest, including the latest usb driver.
I also checked to make sure I have HTC sync 2.08.
but I just keep getting this.
C:\android-sdk-windows\tools>adb remount
error: device not found
Click to expand...
Click to collapse
anyone else getting this issue, or know the solution?
Try this. It worked for me with Windows 7.
http://theunlockr.com/2009/10/06/how...droid-devices/
I started at Step II. Reinstall Drivers since I already had the SDK.
crunchybutternut said:
Try this. It worked for me with Windows 7.
http://theunlockr.com/2009/10/06/how...droid-devices/
I started at Step II. Reinstall Drivers since I already had the SDK.
Click to expand...
Click to collapse
Link no worky.
I had this same problem. Go into your device manager and reinstall your ADB driver. If you're in the same situation I was in, it'll have a "!" on the ADB item in your list. Right click ADB, update driver, pick from a list of available drivers... or something like that. In the list it gives you, you should see something along the lines of "Android ADB Interface." Pick that... it may give you some kind of warning but install it anyway and you're done.
Try this,
adb kill-server
abd start-server
illogic6 said:
Link no worky.
I had this same problem. Go into your device manager and reinstall your ADB driver. If you're in the same situation I was in, it'll have a "!" on the ADB item in your list. Right click ADB, update driver, pick from a list of available drivers... or something like that. In the list it gives you, you should see something along the lines of "Android ADB Interface." Pick that... it may give you some kind of warning but install it anyway and you're done.
Click to expand...
Click to collapse
Ah hah.. thanks for the heads up. Here's the correct link. I also fixed my original post.
thanks for all the advice! I'll give them all a try.
This is what makes this website awesome. I'm glad everyone has come back together after all of that madness.
Tipharet said:
Try this,
adb kill-server
abd start-server
Click to expand...
Click to collapse
FYI, this one didn't work.
@crunchy - hm, I don't see any adb driver reference
I also went to device mgr in win7, and yeah, it has the !, but when I tried to update, it still failed. I even tried pointing to the usb driver folder in my android sdk, but it didn't like it. maybe something specific to win7 64bit?
Maybe I need to install the drivers manually? But what driver should I look for, for this Damagecontrol 2.1 ROM Sprint Hero now?
Did you make sure to enable debugging?
I don't have a link handy, but just go to the HTC support site for the Eris and download the latest HTC sync. It will fix your drivers, no fuss and straight forward.
smw6180 said:
Did you make sure to enable debugging?
Click to expand...
Click to collapse
Yes, tried with it off, and on. I also tried reinstalling HTC sync 2.08.
I didn't tell you to reinstall sync 2.0.8
Go here http://member.america.htc.com/download/Driver/DROID_ERIS_Verizon/HTCSync2.0.25.zip
And install THAT version of sync it has the proper drivers.
Think I told you to go to the Eris page by accident? Think again. Do it, fix your problem and let's all move on.
Sorry for being so blunt, just frustrated you that you wrote off my original suggestion, responding that you already tried reinstalling the same version of sync that wasn't working in the first place. If you paid attention to my first tip this would have already been solved.
obelisk79 said:
I didn't tell you to reinstall sync 2.0.8
Go here http://member.america.htc.com/download/Driver/DROID_ERIS_Verizon/HTCSync2.0.25.zip
And install THAT version of sync it has the proper drivers.
Think I told you to go to the Eris page by accident? Think again. Do it, fix your problem and let's all move on.
Sorry for being so blunt, just frustrated you that you wrote off my original suggestion, responding that you already tried reinstalling the same version of sync that wasn't working in the first place. If you paid attention to my first tip this would have already been solved.
Click to expand...
Click to collapse
actually, I didn't read your post yet when I posted my statement that I installed 2.08. I was responding to someone else. I'll try out your tip. thx.
obelisk79 said:
I didn't tell you to reinstall sync 2.0.8
Go here http://member.america.htc.com/download/Driver/DROID_ERIS_Verizon/HTCSync2.0.25.zip
And install THAT version of sync it has the proper drivers.
Think I told you to go to the Eris page by accident? Think again. Do it, fix your problem and let's all move on.
Sorry for being so blunt, just frustrated you that you wrote off my original suggestion, responding that you already tried reinstalling the same version of sync that wasn't working in the first place. If you paid attention to my first tip this would have already been solved.
Click to expand...
Click to collapse
Try your own link. It doesn't have a link to the Eris page.
EDIT: the joys of technology. When I used google chrome, the download link didn't work - when I used firefox, it did.
FYI, HTC sync 2.0.25 for the Eris didn't work.
ro_bro said:
Try your own link. It doesn't have a link to the Eris page.
googled and found it myself:
http://www.htc.com/us/support/droid-eris-verizon/downloads/
edit: ugh, the download link leads to a general support page again.
Click to expand...
Click to collapse
Must be a problem with the htc site, the link I provided was a direct link. I'll see if I can find another
Edit: now you do have some kind of weirdness going on. If that didn't work.
First make sure you have done the following... reboot pc and phone. Usb debugging enabled. Then connect phone attempt and shell and copy error here.
Also a question, did you install sync 2.0.8 prior to installing the 2.0.25version ?
A few other possible steps you could try.
Go to your start menu and type cmd one you see the cmd icon pop up in the menu rightclick and run as administrator. Then,
adb kill-server
adb start-server
adb shell
If you still get device not found try: adb devices and paste the output here.
obelisk79 said:
Must be a problem with the htc site, the link I provided was a direct link. I'll see if I can find another
Edit: now you do have some kind of weirdness going on. If that didn't work.
First make sure you have done the following... reboot pc and phone. Usb debugging enabled. Then connect phone attempt and shell and copy error here.
Also a question, did you install sync 2.0.8 prior to installing the 2.0.25version ?
A few other possible steps you could try.
Go to your start menu and type cmd one you see the cmd icon pop up in the menu rightclick and run as administrator. Then,
adb kill-server
adb start-server
adb shell
If you still get device not found try: adb devices and paste the output here.
Click to expand...
Click to collapse
Yes, I had 2.0.8 installed, but i uninstalled first before installing the 2.0.25. but I haven't tried the pc reboot, nor the kill server yet, I'll give those a try. thx!
obelisk79 said:
Must be a problem with the htc site, the link I provided was a direct link. I'll see if I can find another
Edit: now you do have some kind of weirdness going on. If that didn't work.
First make sure you have done the following... reboot pc and phone. Usb debugging enabled. Then connect phone attempt and shell and copy error here.
Also a question, did you install sync 2.0.8 prior to installing the 2.0.25version ?
A few other possible steps you could try.
Go to your start menu and type cmd one you see the cmd icon pop up in the menu rightclick and run as administrator. Then,
adb kill-server
adb start-server
adb shell
If you still get device not found try: adb devices and paste the output here.
Click to expand...
Click to collapse
This advice got me further... but here's what I get:
C:\>cd android-sdk-windows
C:\android-sdk-windows>cd tools
C:\android-sdk-windows\tools>adb remount
adb server is out of date. killing...
* daemon started successfully *
error: device not found
C:\android-sdk-windows\tools>adb kill-server
C:\android-sdk-windows\tools>adb start-server
* daemon not running. starting it now *
* daemon started successfully *
C:\android-sdk-windows\tools>adb shell
error: device not found
C:\android-sdk-windows\tools>adb devices
List of devices attached
C:\android-sdk-windows\tools>
Click to expand...
Click to collapse
FYI, I still see a '!' beside my 'Android Phone' icon in my device manager.
Try to download and Install
HTC Sync Version 2.0.18 from HTC Support and it must work for you
Thanks
im trying to set up adb, and it wont recognize my mytouch. ive searched and what i found didnt work for me.
any help would be greatly appreciated.
This helped me.
i dont have windows 7
smjfosho said:
im trying to set up adb, and it wont recognize my mytouch. ive searched and what i found didnt work for me.
any help would be greatly appreciated.
Click to expand...
Click to collapse
First download USBDeview - http://www.nirsoft.net/utils/usbdeview.zip
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
Then, plug your phone in, don't mount it! Pull up a command windows and type:
cd C:\android-sdk-windows\tools (or wherever you have your sdk installed)
adb devices (should see your phones serial number listed if you did it correctly)
adb shell
su (for root access)
sombionix said:
First download USBDeview - http://www.nirsoft.net/utils/usbdeview.zip
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
Then, plug your phone in, don't mount it! Pull up a command windows and type:
cd C:\android-sdk-windows\tools (or wherever you have your sdk installed)
adb devices (should see your phones serial number listed if you did it correctly)
adb shell
su (for root access)
Click to expand...
Click to collapse
i tried this method, did work for me
smjfosho said:
i tried this method, did work for me
Click to expand...
Click to collapse
did work or didn't?
sombionix said:
did work or didn't?
Click to expand...
Click to collapse
sorry, it didnt work for me
Hmmm....worked for me and many others. Strange. You did download SDK with the appropriate drivers, right?
sombionix said:
Hmmm....worked for me and many others. Strange. You did download SDK with the appropriate drivers, right?
Click to expand...
Click to collapse
i downloaded the sdk, what drivers are you talking about?
when i setup the sdk, i downloaded those drivers.
It was a long time ago when I downloaded SDK, however, if I'm not mistaken, I believe when it connects to the server and gives you download options, one of those options is USB drivers.
http://androidcommunity.com/forums/f4/how-to-install-android-sdk-v1-0-step-by-step-5749/index3.html
Yeah, there are definitely USB drivers you need to download.
sombionix said:
http://androidcommunity.com/forums/f4/how-to-install-android-sdk-v1-0-step-by-step-5749/index3.html
Yeah, there are definitely USB drivers you need to download.
Click to expand...
Click to collapse
thats about 64bit windows, im only using a 32bit.
http://developer.android.com/sdk/win-usb.html
Here are the USB drivers for windows. Also, make sure you have 'debugging' checked in your phoned settings. ADB won't work otherwise. After you install the drivers, follow the steps on the first page. Hope that works!
sombionix said:
http://developer.android.com/sdk/win-usb.html
Here are the USB drivers for windows. Also, make sure you have 'debugging' checked in your phoned settings. ADB won't work otherwise. After you install the drivers, follow the steps on the first page. Hope that works!
Click to expand...
Click to collapse
ive tried this as well, that didnt work either,
i think im missing something
Wish I could offer more help, not sure why it won't work. Everything I told you to try is exactly how I set mine up and it works.
sombionix said:
Wish I could offer more help, not sure why it won't work. Everything I told you to try is exactly how I set mine up and it works.
Click to expand...
Click to collapse
when i go into the usbthing i only have one htc and not 3?
smjfosho said:
when i go into the usbthing i only have one htc and not 3?
Click to expand...
Click to collapse
You have to make sure you're running USBdeview as admin on your computer. Also, you won't necessarily have 3. Just select which ever ones you do have, right click and delete those files. Then unplug your phone and plug it back in. You computer should automatically install the appropriate drivers, and you should be able to use adb.
sombionix said:
You have to make sure you're running USBdeview as admin on your computer. Also, you won't necessarily have 3. Just select which ever ones you do have, right click and delete those files. Then unplug your phone and plug it back in. You computer should automatically install the appropriate drivers, and you should be able to use adb.
Click to expand...
Click to collapse
so i did all of that, typed the commands, and it says list of adb devices:
then there is nothing afterward
smjfosho said:
so i did all of that, typed the commands, and it says list of adb devices:
then there is nothing afterward
Click to expand...
Click to collapse
No serial number underneath?
sombionix said:
No serial number underneath?
Click to expand...
Click to collapse
nope, nothing
I Tried guides that try to solve this from everywhere, Including here,
I used latest version of the android usb-drivers that comes with the latest Android SDK (downloaded directly from google with the SDK download GUI thinggy).
Tried to uninstall all usb roots,
Tried force removal of driver using external app and re-installations
Tried different drivers from multiple locations,
And still, whatever I try - there is notihng on the "adb devices" list
"List of devices attached"
<CR>
<CR>
C:\.......>
Everything shows up okay, on first run of the adb the 'whatever' service starts and everything is fine
Device DOES appear properly on device manager "Android Composite ADB Interface".
Windows DOES the pnp beep whenever I check or uncheck the "Debugging mode"
This hapnned both on STOCK ROM (first or second software version of the phone released) and on latest Cyanogen 5.0.6
One thing I did noticed, "Android ADB Device" Either appear under "Android" type (usb debugging on) or under USB Controllers (When usb debugging is off).
Ho, I did not mentioned the phone, I'm talking about Nexus One.
Thanks for any help.
Amm, any ideas?
Try using a program named USBDEVIEW, remove the android driver and plug the phone to your PC again and wait to reinstal the drivers.
I take it your on Windows, so I might not be much help as I use Linux strictly but try to run the command prompt as Administrator (right click > run as I think) and then
adb kill-server
adb start-server
Not sure if that will help but I know in Linux you must start the ADB server as root in order to see the attached devices, so I assume in Windows you must start it as Administrator.
I ran into a similar issue with my sapphire. Turns out it was as simple as me having my tethering app on. Once I turned it off (pda net), it worked like a charm. Hope this helps
Beackman said:
Try using a program named USBDEVIEW, remove the android driver and plug the phone to your PC again and wait to reinstal the drivers.
Click to expand...
Click to collapse
I Ment just that when I said "Tried force removal of driver using external app and re-installations"
drew630 said:
adb kill-server
adb start-server
Click to expand...
Click to collapse
Tried that just now, on windows I'm in the Administrators group, that should work... It doesn't :/
bmxrideher said:
I ran into a similar issue with my sapphire. Turns out it was as simple as me having my tethering app on. Once I turned it off (pda net), it worked like a charm. Hope this helps
Click to expand...
Click to collapse
Good idea, but still no salvation :/
Try uninstalling the mass storage driver for the phone, this worked for me
Oh Ehm Gee!!!!
That was perfect! I did that and I got what I needed. Now I'm off to root that som'bish.
+1 to you sir, +1 indeed
Synestr said:
Oh Ehm Gee!!!!
That was perfect! I did that and I got what I needed. Now I'm off to root that som'bish.
+1 to you sir, +1 indeed
Click to expand...
Click to collapse
No problem, lol, almost a month later. Glad I could help.
Naemion said:
No problem, lol, almost a month later. Glad I could help.
Click to expand...
Click to collapse
Hells to the yea, I now has root and rom and I am a happy boy!
Thanks again
hmm >.< nothing is working for me this laptop is not detecting my (Nexus S) device in ADB
windows sees it fine, drivers are installed (for normal mode and ADB mode), mass storage works,
but ADB Devices list shows up empty
2 other phone works just fine (SGS & XT720)
Update: went to another computer and it shows up properly.... (you just gotta "luv" windows )
Try installing htc sense from htc website even if running vanilla. It will install the driver properly. Then un-install sense and keep drivers. It's the only thing that worked for me.
Sent from my HTC Vision using XDA App
I am using my laptop for ADB currently, but I want to know if it is possible to run ADB through windows in a Virtual Machine? I have gotten to where I have ADB running and the VM reconizeds the phone but as soon as I type,
Code:
adb devices
There is no response. Side note: I am using VMware and am running Tvall's CM7 on my phone.
Edit: solved was a driver issue
adb works when drivers for adb were installed
did you install drivers from Android SDK Tools?
at second you need turn usb debugging on (settings/applications/development)
5[Strogino] said:
adb works when drivers for adb were installed
did you install drivers from Android SDK Tools?
at second you need turn usb debugging on (settings/applications/development)
Click to expand...
Click to collapse
Yes I know this. The virtual machine knows the device is there(ADB drivers are installed) but in cmd it doesn't work. USB debugging is on, another option is the wireless ADB from CM7, but I have no idea how that works. Thanks for the help.
acseazzu said:
Yes I know this. The virtual machine knows the device is there(ADB drivers are installed) but in cmd it doesn't work. USB debugging is on, another option is the wireless ADB from CM7, but I have no idea how that works. Thanks for the help.
Click to expand...
Click to collapse
When connecting phone through usb debugging there is 'Android USB Devices' section in Device Manager (My Computer / Manage / System Tools / Device Manager). Do you have this section while connecting?
Wireless adb application establishes connection via custom port and adb can use this port to communicate with phone.
5[Strogino] said:
When connecting phone through usb debugging there is 'Android USB Devices' section in Device Manager (My Computer / Manage / System Tools / Device Manager). Do you have this section while connecting?
Wireless adb application establishes connection via custom port and adb can use this port to communicate with phone.
Click to expand...
Click to collapse
In device Manager it has "Android Composite ADB Interface" and a "HTC Android Device" My VM connects to HTC Android device, not letting me connect to it in ADB. Before I connect my device and before it installed the drivers I installed the Google driver package from AndroidSDK. Thanks for your help.
How did you fix it?
acseazzu said:
In device Manager it has "Android Composite ADB Interface" and a "HTC Android Device" My VM connects to HTC Android device, not letting me connect to it in ADB. Before I connect my device and before it installed the drivers I installed the Google driver package from AndroidSDK. Thanks for your help.
Click to expand...
Click to collapse
So how did you end up fixing this? I want to connect my phone to the VM.
This is happening to me right now. I have a VM Windows 7, it can detect a "HTC Android Device" but the platform-tool command line cant detect my phone. Even with ADB USB drivers, platform-tools, as well as HTC-sync installed.
How did you fix it? Please tell me
kazzarok said:
So how did you end up fixing this? I want to connect my phone to the VM.
This is happening to me right now. I have a VM Windows 7, it can detect a "HTC Android Device" but the platform-tool command line cant detect my phone. Even with ADB USB drivers, platform-tools, as well as HTC-sync installed.
How did you fix it? Please tell me
Click to expand...
Click to collapse
I uninstalled all the drivers (with USBdeview) and instead of installing with the Google Driver I used the HTC one for MyTouch 3G. I think I installed the drivers before I plugged in the phone. And also what software are you using to run your VM?
acseazzu said:
I uninstalled all the drivers (with USBdeview) and instead of installing with the Google Driver I used the HTC one for MyTouch 3G. I think I installed the drivers before I plugged in the phone. And also what software are you using to run your VM?
Click to expand...
Click to collapse
I am using Oracle VM Virtualbox. Doing VM Windows 7 under Ubuntu 11.10.
I have been trying a few times in the VM Windows 7. I tried the lastest HTC Sync 3.0.0.0 as well as the older version 2.0.3.3 that worked when I was using full Windows 7.
But in VM, nothing works
The VM win 7 can detect a USB Composite Device, but it cant find the correct driver.
edit:
Oh my god!! hopefully you still havent read this post yet because I just got it working!
In the settings of the VM, theres an option to enable USB 2.0
But to enable that, we must install the Oracle VM VirtualBox Extension Pack
It works!
edit2:
but somehow the transfer speed is really slow...
i guess i will just install windows again dual boot it
Yay! Congrats if I helped at all please hit the thanks button.
Sent from my Dream/Sapphire using XDA
acseazzu said:
Yay! Congrats if I helped at all please hit the thanks button.
Sent from my Dream/Sapphire using XDA
Click to expand...
Click to collapse
Not until you tell me about your VM
I want to know that because at the moment the transfering and intallation of APK files in Oracle VM VirtualBox is utterly slow (comparing with my old Win7 days), I am interested in other alternative VM which might be faster.
I see you mentioned VMware in you first post, I went to their website (link) but I see a lot different products... can you tell me which one you used, can you please tell me more about your VM?
Thanks in adcance.
edit:
Hey there again, I fainlly got VMware working.
I went for VMware Player 4.0.2. But for Ubuntu 12.04, we need a custom patch the VMware before it can run gracefully.
Not I have got it running now, VMware is so much faster than Oracle VM.
Thanks for the suggestsion!
kazzarok said:
Not until you tell me about your VM
I want to know that because at the moment the transfering and intallation of APK files in Oracle VM VirtualBox is utterly slow (comparing with my old Win7 days), I am interested in other alternative VM which might be faster.
I see you mentioned VMware in you first post, I went to their website (link) but I see a lot different products... can you tell me which one you used, can you please tell me more about your VM?
Thanks in advance.
edit:
Hey there again, I fainlly got VMware working.
I went for VMware Player 4.0.2. But for Ubuntu 12.04, we need a custom patch the VMware before it can run gracefully.
Not I have got it running now, VMware is so much faster than Oracle VM.
Thanks for the suggestsion!
Click to expand...
Click to collapse
I personally use Workstation. But for me VMware is alot faster than Oracle VM VirtualBox. Glad I could help
adb driver won't connect
I'm running windows parrallel on my mac. On the windows side I have the samsung drivers downloaded but when I go to root my phone the command line says doesn't recognize. Anyone know away I can get drivers to recognize phone when running virtual on a mac?