Database Users

Activesync over Wireless

The group is generally quiet on this one. I have a problem getting ActiveSync to work over a wireless network. The wireless network is otherwise faultless. Can browse the internet, transfer files between servers etc but cannot perform a sync to my laptop. The laptop is also faultless on the wireless network and Activesync works fine via the cradle. All firewalls and other clever stuff on the laptop disabled.
The symptoms are that a connection starts but never gets fully established. Then it all stops. I have recently performed a hard reset on the palmtop and rebuilt the image (for other reasons) but this problem has not changed as a result of this process.
I have filddled with setting the network settings to connection via the internet and from work but that doesn't seem to make much difference. I'm beginning to run out of ideas.
Any help most appreciated fellow globe dwellers!
Thanks
AA

Hi AlliterationArtiste,
I had it working on a previous PocketPc, and I think that it was having the ip address for the pc that made the difference for me.
You PocketPc probably only knows the name of your pc, and if it can't get that name resolved to an ip address anywhere, you are sol.
What I did was install an app called Pocket Host. It acts like the local host file on a pc. I put my pc name and its ip in the app, and then it worked.
I have since switched to dhcp which ruins the solution...
here is a link from Handango:
http://www.handango.com/PlatformPro...tType=2&catalog=0&sectionId=0&productId=54305
Just a thought, and worth a try.
Torben

You're a wizard!! This worked perfectly.
The whole thing was made more interesting because I run vmware on my laptop and so there are several ip addresses that the machine can respond to. I used to sometimes get a connection but now thanks to your excellent suggestion I can a 100% reliable connection
Thankyou

ICS & VPN with WM6

My searches on the web haven't yielded much help or information so I thought I would come to the experts...
I have a Treo 750 that I just "upgraded" to WM6 2 days ago. I noticed that DUN has gone away and was replaced by ICS. After configuring my laptop to use that instead of DUN I connected and was surfing the web. My problem now is VPN. I travel frequently (luckily I'm in the office until Jan.) and regularly used my phone to connect to the corporate network via VPN. I also work with a lot of other companies and have VPN access to their systems as well. Basically now I can open my Cisco VPN client, connect to a VPN gateway, authenticate, get assigned all the appropriate IP information, but cannot communicate on the network. What gives? Is there a solution to this? If not, what the heck was MS thinking when they did this!? My phone is basically useless for one of the major reasons I bought it...
Any help is appreciated!
thanks!

Ok, further searches found that DUN can be added back into WM6 via a cab that was posted here at the XDA forums. I installed it and the DUN service is now visible again. I unpaired by phone and laptop, re-paired, and included DUN. Now when I try to connect, I get the DUN connection box after the bluetooth connection is initiated but when I click DIAL I get the DIALING... prompt, followed by Error 678: The remote computer did not respond.
Anybody get this working on a Treo 750? Thoughts, ideas suggestions?

What is the ip address you are getting via the cisco vpn client
It maybe that it is in the same subnet as the ip address assigned to the pc from the wm6 ics. The ICS gives the address 192.168.0.1. and if your Cisco is also giving a 192.168 address then you will have two routes for the 192 address range thus giving you the problem when accessing hosts.
If this is the problem Im pretty sure you can change the address allocated via the ICS using a registry editor. If not you may be able to get work to use a different range for you on the cisco vpn.

Our corporate network is 172.x.x.x so it's nowhere near the 192.168.0.x assigned by the phone. When I look at the route in the VPN client I see 192.0.0.0, 10.0.0.0, and 172.0.0.0 so I am assuming 192 is my laptop, 10 is the phone, and 172 is the corporate network.
I'm guessing NATing is the problem. I've been reading that if I use a different APN (isp.cingular instead of wap.cingular) there is no NATing. I've tried both, and I've tried turning off and on the "force AT&T" proxy setting to no avail.
Tried the DUN cab hack that is floating around for WM6 also. The service is active again and I can also add Modem Link back in and my laptop sees my Treo as a modem but when I dial I get an error stating the remote computer did not respond. I'm guessing along with going from WM5 to WM6 AT&T also updated the radio so the old communications protocols don't work anymore?

Hello Sir,
I have exactly the same problem... I have successfully connected via VPN, however unable to communicate with any devices on that network... Then what is the use of VPN on the phone? I've tried searching online for answers, but no luck... People are having the same problem but no one knows how to solve it... I'll try and trouble shoot this problem more as soon as my exams are done...

Hi
Working successfully for me. I am using Imate jasjam wm6. Pc using cisco client connecting via ics on phone. I have telstra 3g connection tested ok on both telstra.internet (Nated ip) and telstra.extranet (real ip).
You are correct it may be an nat issue. Can you check that your transparent tunnelling is on as follows: right click on your connection entry in cisco client and select modify then transport tab. Check that enable transport tunneling is enabled ipsec over udp(Nat/pat).
The other thing to check is that the cisco vpn server aslo has transport over Nat on as well.
Also are you sure your corporate ip range is 172 or is that the range given by the cisco vpn to clients.

Transport tunneling is on (always was). I'll have to check with our network admin and check on the VPN server setting...I guess as long as I have connectivity back to the office, I don't need it that badly for all the customers I need to connect to at various times.
Yep, positive on the corporate IP. Right now it is 172.28.1.87 and I'm in the office.
Thanks for the help so far. Got any other suggestions on how I can troubleshoot further?

One other thought...should I modify the registry on the phone to assign a different IP address to my laptop? Would that help?

Same Problem
MX. I am having the exact same issue but with Securemote VPN. I've looked through the registry and found the assigned address, but I'm wary of changing anything until I can find some more information.
Anyone out there ever change the DHCP configuration for their phone?

Somewhat related question?
Im attempting to route my connection on my mobile through a laptop acting as a wan bridge, then uplinking it into the router. The issue Im having is that XP and WM6 both use the same IP Block. Ive read and read and cant find much to tell me how to change the WM6 IP BLock to something like 192.168.2.1 rather than the default 192.168.0.1
Does anyone have any pointers? Ive looked through the registry. There MUST be a simple way to change a default.
To clarify my setup, I am using ICS Via USB into a UMPC laptop running XP. The UMPC is set to share that same connection back out over Ethernet. The ethernet runs into my WAN Uplink on the router and then back out via wifi/rj-45
This setup works as I have done it using Wifi with other networks, and I can chose the "Lan3" to share under the advanced settings on the UMPC. The reason I dont just share out via Wifi from the start is that Wifi on my Kaiser and Raphael both make the device to hot to charge, thusly killing the battery within a couple hrs of sharing. If I share via USB , it stays pretty cool and still charges.
Anyone have any pointers?
I have already tried tricking XP into using the Lan on another block but as soon as you try to share the USB lan, it reverts back to the 192.168.0.1
The only way I can imagine is a registry modification or a program change in ICS.
Thanks Much!

Connecting a Smartphone to a Mac via USB.

I have been searching for more than 3 hours for some kind of driver for my T-Mobile Dash, to use it as a GPRS/EDGE Modem. My iBook is an old G3 model, so even if I were willing to purchase Missing Sync (which I'm not, btw), my iBook is not supported, as it is not a G4 or better.
I am looking for a FREE driver for OS X 10.4 Tiger, specifically an "RNDIS" driver. I am not particularly looking for speculation. I believe I have the correct modem scripts, but I can't get my Mac to see the USB Modem. Yes, I have put my Dash into ICS mode. Yes, I am running Windows Mobile 6. Yes, I have all of the updates to OS X. Yes, I have tried searching the forums (this one, and several others). Yes, I have tried "Googling it", which produced much good information, but no solutions to my problem. Although my Dash is Bluetooth enabled, my iBook is not. Yes, I know I can add a USB Adapter. I may well do that in the near future. Right now, however, I'm just looking for an RNDIS USB driver for Mac OS X. I don't need Synchronization features, at the moment.
Anyone have any ideas??
Correction: Does anyone have any "good" ideas??
Thanks,
--Aaron

I just wanted to touch this and see if anyone had any information to help. My girlfriend has a new Pantech Duo and I would like to get USB tethering working for that. I did find a couple sites that may help (HowTo: USB Internet Sharing With Linux And Windows Mobile 6), but I don't know enough about the technology to feel comfortable trying it. Thanks.

I use my wizard as a modem sometimes just using Internet Sharing in my TNT Rom. You may be able to find a .cab for it. From there just use activesync/WMDC. I haven't tried it on activesync, only on WMDC.

he's using mac

download wmwifirouter by chainfire or the free trial of walkinghotspot (if your handset and mac have wifi), or a micro bluetooth dongle if not.

leoni1980 said:
download wmwifirouter by chainfire or the free trial of walkinghotspot (if your handset and mac have wifi), or a micro bluetooth dongle if not.
Click to expand...
Click to collapse
Pantech Duo doesn't have Wifi. That was my first attempt before I realized it didn't have it, because I'm using that solution with my Kaiser.
RE: bluetooth. I haven't had a lot of success with a reliable connection. I've tried with my Kaiser and successfully configured it, using it to connect three or four times from my house, but as soon as I went on the road, I couldn't get it to connect at all, using the same steps as before. I'm sure that's either karma or equipment smarter then operator, but I'm hoping for a USB solution for simplicity (theoretically) as well as the better data throughput.

SyncMate
Well, if you are using a Mac then here is what i used to do before I got Missing Sync.
For Syncing contacts and dates and such i used Eltima Softwares SyncMate. Runs pretty good and can be done using the USB cable. It also provides the option to do it over Wifi, which is faster. The Full version allows your to Sync even more stuff I believe.
For Syncing files, I simply paired my phone with my mac and transfered the mp3's, jpg's, etc.
Hope this helps,
Paul

Welcome to the hell which is created when you have a Mac and a WM device!
I have been mucking around with trying to get my internet connection shared with my MacBook pro for a couple of months. Here is what I have tried
- Bluetooth PAN - There is an issue with the MacBook Pro whereby the bluetooth PAN will produce incredibly bad latency issues rendering it useless
- Modem Scripts (Bluetooth)- Have never found one which would connect....I have tried a few
- Mobile Stream (USB) - Never managed to get a connection. The support team said that they had never seen the issues I sent in logs. They will investigate and hopefully resolve in future releases.
-PDAnet (Bluetooth)- It actually works! although it seems to hang the dialer process on the Mac periodically which requires a reboot to resolve
-Wifirouter - It works although it caused issues with access points in the office and drained the battery very quickly.....even when powered from the MAC it would empty the battery. Worked OK when using a mains charger.
-VMware Fusion to XP desktop (USB) - Works and works well however you can't provide (well i havent got it working) an internet connection to the Host Mac.
At the moment I am using the PDAnet 'solution' but I am always looking for something more reliable. A usb connection would be better and more reliable as there seems to be big issues on the Mac bluetooth environment.
Cheers
Aidan

Hell, I couldn't even find an RNDIS driver for windows (apart from installing ActiveSync) which is why I made the Linux post.
Yeah, OSX is *nix based, but I don't think you can use Linux packages on it, what I know about macs could be written on the back of a postage stamp though.
Regarding the VMWare solution, did you try enabling internet sharing for WinXP in the VMWare session (using a different IP to the one the Mac uses) and set the default gateway of the Mac to the IP of the XP machine in VMWare?
What I mean here is that the PPC shares the connection to the VMWare windows machine via USB and the VMWare windows shares the connection to the Mac via TCP/IP.

To be honest I never really played about with sharing the virtual machine with OSX too much. I was a bit put off with running fusion like that all the time as it sucks the life out of the battery when out and about.
Until a better solution is available I will stick with PDAnet. It does put me off windows mobile (slightly) moving forward. It would be interesting to see if the Bluetooth PAN connection works correctly without the latency issue on the diamond when it is available. If it worked properly it would be the best solution.
Cheers
Aidan

Read http://forum.xda-developers.com/showthread.php?p=2398248 for a review & comparison of WalkingHotSpot

With VMWare Fusion, setup VPN connection for the OS X host to connect through guest
evilc said:
Hell, I couldn't even find an RNDIS driver for windows (apart from installing ActiveSync) which is why I made the Linux post.
Yeah, OSX is *nix based, but I don't think you can use Linux packages on it, what I know about macs could be written on the back of a postage stamp though.
Regarding the VMWare solution, did you try enabling internet sharing for WinXP in the VMWare session (using a different IP to the one the Mac uses) and set the default gateway of the Mac to the IP of the XP machine in VMWare?
What I mean here is that the PPC shares the connection to the VMWare windows machine via USB and the VMWare windows shares the connection to the Mac via TCP/IP.
Click to expand...
Click to collapse
I was reading this thread and you gave me the idea which led me to a workable solution so I thought I'd share back. I'm in the same boat as many ppl with latest MBP which doesn't work well with BT PAN (slooooowwwww). I sort of needed Fusion anyway since I'm starting to write WPF apps and performance is terrible over RDP from OSX (different subject). Anyway, here are some keys to getting this to work:
1. Setup a private network (not bridged or nat)
2. Install activesync on guest and fire up 'Internet Sharing' from WM6 device and connect device to Mac with USB cable.
-at this point you should be able to get online from the guest OS through the mobile device as previous post indicates-
Here is where the fun starts:
3. Create an advanced network connection on the guest (accept incoming connections, aka VPN connection)
4. *IMPORTANT* Go to the TCP/IP settings for the advanced network connection and setup a range of IP addresses in the same subnet as the active interface attached to the WM6 device (run ipconfig to determine). Make sure that 'clients can request their own IP address' is unchecked. Make sure this range falls outside of the IP address assigned to the guest interface from the WM6 device.
5. On the host Mac, create a new VPN connection (PPP) and set the host to the private IP address assigned to the guest (again, you can determine that through running ipconfig on the client). *IMPORTANT* Go to the advanced settings for the VPN connection on the Mac and set the DNS to point to the IP address of the router of the guest WM6 device interface.
6. Connect to the VPN from the Mac host and you should be off and running.
It works flawlessly with very good speed (relatively speaking) over the 3g connection. To get online in a pinch, now I just need to fire up the guest (which takes just a couple of seconds from a saved state), connect my device via usb with internet sharing started, and then connect to the vpn from the Mac.

wireless connecting but no internet

Hi everyone...
I have a touch HD that is not getting anything from the Internet even though it is connected to the wireless network. I was told that this problem started when the new proxy server was implemented and it applies to all windows mobile devices. I have checked the proxy settings and they are right. The Internet works fine at home... it just does nothing at my work.
Any ideas would be highly appreciated.
By the way... I have tried the solutions mentioned around here - like changing the channel - and nothing works.

Hi,
im facing the same problem and i suspect my WLAN access point. It works on all Wireless unless mine at home. I`m using a Zyxel Router.
Are you using DHCP? The answer from zyxel was to change the ip settings on my HD to static - means manual IP, Gateway and DNS.
It works now for a minute or so but then again dead. Now using data flat from my mobile company.
Hope this helps.
Regards,
Nils

Thanks for your reply...
I have tried that.. but I cannot get anything to work...
I will try again... although one solution I want to try is to find a way to share my laptop's connection with my mobile and use it while I am close to it... but wireless connections cannot be share it seems...
anyway, thanks.

sounds more like it's you adhoc wifi on the laptop which is the problem
you have to set it up to work on the laptop for it to ever share with a pda

Actually it connects to the wireless router. There are three access points at work and I have tried to connect to them all. The only difference between these and my home wireless connection is the proxy server at work. I tried every possible solution with no success.
Anyway.. I will try something new when the weekend is over.
Thanks anyway.

OK. So this is how it is:
I got the internet to work by using a fixed IP instead of the dynamic IP assigned to me by the DNS. Once I supplied my username and password I could access the Internet. However, the touchflo interface cannot access it.
Is there a way to configure the HTC touch flo interface to set the proxy for it?
Regards

VPN connection from WM6 to XP Prof.

Hi everybody,
after googling through a lot of forums for some weeks now, I learnd a lot about VPN with WM6, setting up a VPN Server and all of this stuff.
But nowhere was a solution for my special problem...
I have an XP-Prof Server in my network, wich is set up as a VPN Server . It is behind my AVM Fritzbox 7270 where all the port-forwardings vor PPTP (GRE and port 1723) are done.
When I connect from the "outer world" using an XP or Vista machine, everything works fine.
But: When I connect from my Handheld (Samsung B7610 Omnia Pro), the connection is dropped after round about a minute.
Within this minute, I can start a Remote-Desktop-Session etc and everything seems to be alright until the connection gets lost.
There is no other connection been started (except my normal internet connection through "web.vodafone.de") , and Active Sync is set to "manual", so it can't disturb my VPN session.
Is there anyone with an idea what I can do to get my VPN working???
Thanks in advance,
Joschi

is your main goal to do VPN
or to do Remote-Desktop ?
if the later I would suggest vnc rather then ms's options vnc is free and generally works better imho

Hi Rudegar,
and thanks for your reply.
First of all, I want to get access to my Files, located on my server.
Remote-Desktop would be nice but is not a must have...
But thanks for the tip. I'll try VNC. However, I fear that the lost connection
hasn't anything to do with RDP. Even when i just connect without using any tool the connection gets lost within one minute.
Do you have any idea?
In some other threads I read about stopping ActiveSync and adding IP-Exceptions. But none of all solved my problem.