Hi Guys,
I was silly and got my SPV M700 wet at the weekend. And now the battery will not charge. The right hand Notification LED flashes Orange, and in windows the battery indicator does NOT show the phone as charging.
Anyone got any other ideas?
Stuart
Related
Hi
I have an orange SPV M3100 which died on me a few months back and I think its a repair job to be honest, It was running low on battery and I simply connected the charger and the phone immediately switched off and displayed a red led, i looked at the tip of the charger (Mini-usb type) and noticed that the bottom of the tip was slightly bent up as if it had been stood on or something.
Since then the phone wont switch on, charge or anything, its even stopped displaying the red led, I have tried the following.
1. Tried alternative chargers
2. Tried connecting to USB on PC
3. Tried resetting, removing battery and connecting to charger and putting battery on whiclst connected to power.
all of the above does nothing, I have thought about buying another battery but dont really want to go to the expense of buying a bettery to find that its completely dead anyhow
Any advice chaps?
Thanks
Will
I have the same problem, last night was browsing the web on wifi and the phone simply switched of, thought it might be the battery was dead so i hooked it up to the charger, the phone'sred led came up, came down this morning and it is still red..not green and it will not now power up....it must be something simple can any one help..?
ctasystems, if the red LED doesn't come on you may have fried you phone... If the power on the usb charger connected with the data part of the Hermes it may have fried the mainboard. I say this as this happened to my Imate Jam. The only thing I could suggest is if you know someone else with the same phone then try their battery and charger. If it works then its the battery &/or charger. If it doesn't then you've got something to sell on ebay - it will get you some cash to put towards a new phone...
hooperman, does sound like the battery BUT it sounds more like the battery is completely stuffed. As above, change the battery with a friends battery or go to the shop and see if they have a spare around you can try... The red LED means the hardware is still functioning so that would be my advice or purchase a cheap battery off of ebay.....
Cheers...
Hi all, i have a S200, when i power on the equipment the red led stay on, is on all the time,if i power off the equipment the led goes off , with equipment disconected (off) if i connect the charger the led goes on(red) if i disconect charger led goes off. Any help to solve this ? tks in advance. (escuse bad english)
I had something similar going on last year when I was on vacation in Spain.
I connected my Qtek S200 via an adapter to the cigarette lighter. Suddenly the light turned red. Never saw it before, I think the circuitboard in the adapter broke and so my Qtek got 12 Volt! The battery went extremely hot also.
Disconnected and bought a new adapter. Problem solved.
i using original charger and charger is ok , i have changed batery and problem is same,i have re-instaled windows mobile but no way......
Hi all.
I have problem with my T Mobile SDA music a.k.a. dopod 585 / HTC Amadeus
After upgrading to WM 6.1 by ALEUT everything going well but the charging.
When I plug the usb sync, LED indicator going amber, and battery indicator on LCD is charging , after a while (approx. 2-3 sec) LED going green and battery indicator is full, but if I disconnected the usb cable, battery indicator return to real state (half full on my case). It's going the same with the USB charger.
I've tried to drown the battery, still the problem persist.
FYI, I have 2 battery and resulting same problem.
Anyone could help me with this please...? Solution or suggestion would be very appreciated.
Regards
Hi all! Sorry in advance for my bad English.
I have a Qtek9100 with WM5. G4 IPL/SPL 2.21.0001
Now I'm experiencing a problem charging my device.
I had a miniUSB problem some months ago, when my device accidently fall from the desk, when it was charging. The charger get damaged, and the port miniUSB on the PDA as well, and it only charged in a position, making pressure on the miniUSB. Replaced the charger because it's not the only Wizard at home and my dad welded (I think it's how it should be said, but for translation problem I want to mean stick the miniUSB to mainboard like... "glue'ing" it) =$
It worked fine! First days but then, when I link it to charger the device show the icon charging, charging bar is moving normaly, but when the green led turn on. Battery Icon show it's full, but when unplugged it from the charger, the battery icon decrease a lot, like 20% or less.
Sometimes, when it's charging when I pick the Wizard, it's turned off, and the RED led is on. Like when it's fully charged, but RED!
Do you think it's a hardware problem? Mainboard? If it's a hardware problem at the Official Qtek store, They'll ask for more than the commercial value for the repair!
I love my Wizard. Can't get used with another mobile phone!
Please help me!
Thanks a lot in advance.
Regards, skrpn.
Hello everyone!
I recenlty bought an other battery for my HD2. I have a problem that when i boot into android, it does not charge the battery but when i boot into clockwork recovery and put it on charging then it charges. In android, the amber light turns on but the battery keeps draining. On the screen it also shows charging but doesnt charge. i am using ★★★★HyperDroid-CM7-v2.0.1[a2sd+][CyanogenMod7 LEO 2.3.3]
I tried resetting batterystats.bin but it was of no use. The previous battery works and charges fine. Please help
sirajmunir said:
Hello everyone!
I recenlty bought an other battery for my HD2. I have a problem that when i boot into android, it does not charge the battery but when i boot into clockwork recovery and put it on charging then it charges. In android, the amber light turns on but the battery keeps draining. On the screen it also shows charging but doesnt charge. i am using ★★★★HyperDroid-CM7-v2.0.1[a2sd+][CyanogenMod7 LEO 2.3.3]
I tried resetting batterystats.bin but it was of no use. The previous battery works and charges fine. Please help
Click to expand...
Click to collapse
Hi,
Are you now using an extended battery?
Thanks of the response,
No its 1230 mah.
Help, I'm having the same problem. My battery is no longer charger now matter how or where I plug in the phone (car, computer, AC outlet). I have a battery I bought from Batteries Plus that was working fine until yesterday when the battery indicator started going haywire and the battery wouldn't charge. I also have another battery I bought from eBay that is doing the same thing. They are both 1350 mAh batteries.
Check the connection battery pins on the phone there are 3 of them and sometimes they get bent up with taking the battery out and putting it back in mostly the center pin if any are bent up gently push down with light force until they all aligned and pointing strait towards the top of the phone. I hope that helps.