Related
Hello,
I have been trying to root my friends HTC Magic following instructions I have found on this and other forums and having no luck.
The phone in question is a vodafone htc magic.
My problem is that the computer does'nt recognise the phone as the drivers don't seem to work for it!
Could somebody please post a step by step guide for Noobs so I can see where I am going wrong!
I rooted my Hero no problems, but the Magic is proving a bit more of a challange!!!!!!
Many thanks,
Iain
You could do what I did which I've summarised below. There's probably more backup steps than is necessary, but you can never be too careful.
There's loads of guides out there with the guides and detail, e.g. http://forum.xda-developers.com/showthread.php?t=519523
but they seem to branch in and out of methods quite a bit. I've added a few links to the pages I used for the detail.
The method I used is the 1 click backdoor, which also disables OTA updates to stop it being closed in the future I think.
First off, I'm a Linux noob and managed okay because the apps are so well thought out, but this is all done at your own risk.
Secondly, your uk Magic Vodafone prob has 32b board, not 32a.
(There's plenty on this forum. Or the Cyanogen one on the Dream forum works for 32b too.)
You can check with extra step by powering off, then on power again while holding back button. Last digits at top tell you the board details. Menu button gets you back.
0) Install the Android USB driver, connect, mount, then disconnect, etc.
http://dl.google.com/android/android_usb_windows.zip
1) Use google to sync all your contacts, etc. to google account so restore is automatic.
2) Use Astro to Backup your apps etc to the sd card
3) Goto wireless settings, mobile networks, apn, select and make note of your vodafone UK APN details (so you can type your 3g settings back)
4) Use USB to copy your SD card to your PC
5) From your phone, Download Cyanogen recovery. Don't run yet.
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
( This basically automates the rooting and booting to this recovery image : http://forum.xda-developers.com/showthread.php?t=523558 )
6) From your phone, Download a rom image; the 32b board you prob have in your UK Magic allows you to use 32b ones, I used the Cyanogen one here.
http://forum.xda-developers.com/showthread.php?t=537204
7) Use Astro to move the rom file from \sdcard\download to root of \sdcard
8) Run Cyanogen recovery 1.4 1-click root installed in 5.
Use Backup recovery image
Use Flash recovery
9) Poweroff, home + power to get into the custom recovery image
10) Select Nandroid backup to create new backup (this copies your phone to your SD card)
11) Reboot. Repeat 3 to get the backup of the nandroid folder, and the recovery image created in 7 and 9 onto your PC
12) Run Cyanogen recovery 1.4 1-click root installed in 5 again.
Flash recovery (this makes next boot 'special')
13) Reboot. Poweroff, hold home + power on again.
14) Select WIPE (You did backup your apps and SD card data right?).
15) Then select apply any zip from sd.
Follow instructions to install the Cyanogen rom image you moved to the root of your SD Card in 6 and 7
16) Wait 10 mins or so. The last message about writing root or whatever doesn't explicitly say finished.
17) Reboot.
If you have reboot hang, most people report is because missed WIPE step. Otherwise consult the relevant forum for the Rom you downloaded.
18) Do the new user settings thing. The activation and sync will fail cos you've not got 3G yet.
19) Goto network settings, advanced, APN, type in your vodafone UK APN details (so you can type your 3g settings back)
20) Done
21) If you've got Cyanogen Install the updater from marketplace (search for Cyanogen), or here...
http://forum.xda-developers.com/showthread.php?t=544663
I also installed:
Audio resources unzipped to your SD Card root from the Cyanogen rom pages, this reinstates notifications and ringtones I guess were removed to allow the memory obsessives to keep their phones clean.
SetCPU from this site, to override the default Cyanogen high overclock settings when phone is sleeping.
Cheers
Chris
Hi Chris,
Thanks alot for that, my friend is coming over after the F1 so will give it a go and let you know how we get on!!!!!
Thanks alot for your help!
iain
Hi!
Did you solved the problem, I seem to have the very same problem as you
trying to get cyanogen on my uk htc magic
Hi,
I have been trying to get cyanogen on my vodafone uk htc magic for a few hours now, not even getting close though!
The problem is, i already have the proper 1.6 update which vodafone pushed out a couple weeks back, and now want to root my phone and get cyanogens 1.6 on it. The flashrec application only runs on early versions of cupcake i believe, so my first step was to get that on my phone. (I have been following this: http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod aswell as trying the guide on this forum thread)
When i quickboot the phone and try to install the 1.5 update, it goes all the way through with the progress bar in the top right, then fails right at the end on 'Model ID Incorrect! Update Fail!'. When i reboot the phone it is just as it was before.
I have also tried putting the cm-recovery-1.4.img file on the memory card and installing that from flashboot but that also fails.
Do you have any ideas / recommendations for getting cyanogen on there?
Thanks,
Aaron
[email protected]
Skype: atrout1991
aaron465 said:
Hi,
I have been trying to get cyanogen on my vodafone uk htc magic for a few hours now, not even getting close though!
The problem is, i already have the proper 1.6 update which vodafone pushed out a couple weeks back, and now want to root my phone and get cyanogens 1.6 on it. The flashrec application only runs on early versions of cupcake i believe, so my first step was to get that on my phone. (I have been following this: http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod aswell as trying the guide on this forum thread)
When i quickboot the phone and try to install the 1.5 update, it goes all the way through with the progress bar in the top right, then fails right at the end on 'Model ID Incorrect! Update Fail!'. When i reboot the phone it is just as it was before.
I have also tried putting the cm-recovery-1.4.img file on the memory card and installing that from flashboot but that also fails.
Do you have any ideas / recommendations for getting cyanogen on there?
Thanks,
Aaron
[email protected]
Skype: atrout1991
Click to expand...
Click to collapse
Is there a solution for this?
I did get this working in the end, was quite a while ago now though...
I am pretty sure that I used the relentless rooter program to get it working in the end, details/download are here:
http://forum.xda-developers.com/showthread.php?t=556200
Aaron
Yay, I've finally found a reliable way to do this. After completing these steps, you'll be able to install any GSM Hero ROM. Still, neither I, nor anyone else, can be blamed if something goes wrong and you end up with a shiny paperweight.
-2. Changelog
16/11/09
Updated to Amon_RA's latest recovery image
15/11/09
First release of the guide!
-1. Thanks!
This guide would not have been possible without:
TheUnlockr (great guides)
Amon_RA (recovery image)
xda-developers (need I say more?)
MoDaCo (Excellent ROM)
QMAT (GoldCard)
craig0r (first to root the Telus Hero)
pi3ch (copy from cmd)
And everyone involved in rooting the Dream, the Sapphire, the Hero, and Android in general. Many thanks to everyone involved!
0. Before we start!
If you haven't installed all the drivers for your phone already, follow the instructions on this page to do so. It also shows you the basics of ADB.
Also, a forewarning: there are reports that not all microSD cards work. If yours doesn't work, try another one. Hopefully you'll still have some dough in your wallet by the time you find one that works. Just kidding.
Also, not all microSD readers work either. I have one that just refused to write the GoldCard image to the card, but thankfully, my laptop's SD slot worked.
And, these steps have only been tested on Windows XP 32bit. If you use anything newer, it may or may not work, but most importantly, if you want any chance of it working, you'll want to run most of these apps and commands in Administrator mode.
Finally, make sure you have a Wi-Fi connection, as your data connection will be lost at some point while you need to download something from the Market.
1. Downloads!
You'll want to get all your downloads before starting this.
HxD
RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe
flashrec
Amon_RA's recovery image
Updated radio
2. Prepare your phone!
On your phone, go to:
Settings > Applications > Development
There, check USB debugging.
3. Backup your APN settings!
Go to the Market and install APN Backup and Restore. Run it, and backup your APN settings with it. This is necessary to restore data access after rooting.
4. Get your GoldCard image!
The GoldCard bypasses some weird check on the phone and allows you to flash ROMs that are otherwise rejected, due to them being older versions, or some other reason that HTC decided it'd be so.
With the USB cable plugged in, open the notifications shade and tap HTC Sync. It doesn't matter if it can't sync, but what matters is you can enter the adb shell. If you don't know how, you haven't done step 0.
Now, go in adb shell and run this command:
Code:
cat /sys/class/mmc_host/mmc1/mmc1:*/cid
The output is your microSD card's serial number. Right click anywhere in the command prompt, and click on Mark. Then, select the serial number, and right click. The serial is now copied into the clipboard, so open up Notepad and paste it there.
Now, with that serial number written down, paste it into my lame GoldCard hex reverse. Please credit me if you use that page in your guide!
Next, do as my page says, grab the reversed serial number and get your GoldCard image with it.
5. Create your GoldCard!
So now you have your GoldCard image. Remember, this GoldCard image is valid only for the card from which you got the serial number. If you use another card, get another image.
Turn off your phone, take the microSD out and plug it into the your preferred reader. Again, not all readers work. Not all microSDs work.
Now, unplug from your computer any removable storage except for the microSD. This is to avoid confusion in the next step.
Before making the GoldCard, backup anything you need from the microSD, as it may get erased in the process. Most importantly, backup the APN settings that we got earlier, from APN Backup and Restore.
Now open up HxD. From here, you'll open two things. Your microSD in the raw, and the GoldCard image in the raw.
To open your microSD go to:
Extras > Open disk
In the pop up, under Physical disks, select the (supposedly only) Removable Storage. If there are two, I don't know which one is the right one, so unplug more stuff from your computer.
Before you click OK, be sure to uncheck Open as Readonly. We can't make a GoldCard if we can't write on it, right?
To open your GoldCard image, go to:
Extras > Open disk image
There, select your downloaded goldcard.img file, and click Open, and then OK.
Now you should have two tabs open in HxD, one being the microSD, and the other, active one being the GoldCard image.
Press Ctrl+A on your keyboard to select all, then Ctrl+C on your keyboard to copy. Switch to the microSD's tab, make sure the cursor is at the complete top-left corner, and then press Ctrl+B to paste, and then Ctrl+S to save. Accept the risk and your GoldCard should be made.
To verify, close the microSD's tab, eject it, unplug and replug it, and reopen it in HxD like we did earlier. It should still have the GoldCard image written at the beginning of it. If not, either the microSD or the reader or both don't like making GoldCards, so you'll want to try a different combination of card and reader.
6. Downgrade!
Let's flash the downgraded ROM now. Plug your microSD, now a GoldCard, into the phone and turn it on. After it finishes booting, turn on HTC Sync. Again, it doesn't need to actually synchronize.
Now, run the RUU you downloaded earlier and follow the steps. If the GoldCard works, it should flash and you'll end up with a downgraded phone. If not, then you either didn't write down the microSD's serial number correctly, or the microSD doesn't like to do its job.
Set up the downgraded phone with the default settings, and turn on Wi-Fi. Get on your Wi-Fi network and install Linda File Manager.
Now, on the phone, check:
Settings > Applications > Unknown sources
Now turn on USB Storage, and copy flashrec and Amon_RA's recovery image to the microSD. Rename the recovery image to recovery.img to save a headache later. You may as well put the backed up APN files back on the microSD too, if they got erased.
Disconnect USB storage, load up Linda, go in the SD card, and install flashrec using Package Installer. Now, load up Recovery Flasher, press on backup, then type in:
Code:
/sdcard/recovery.img
Now press Flash recovery.
7. Update the radio
The radio that came with the downgrade is quirky in North American networks. We'll update to the latest IU radio, which works with our networks here.
First, reboot into the new patched recovery. Turn off the phone, and then turn it back on while holding the Home button. Keep holding it until you see the recovery menu.
Once you're there, scroll down using the trackball to turn on USB Mass storage. Plug the phone in the computer if it wasn't plugged already. The microSD will show up on the computer. Copy the updated radio zip to the root of the microSD wait a few seconds, then turn off USB Mass storage on the phone.
Now, select Flash update image, and then Apply sdcard:choose zip. There, the radio zip should show up. Select it and flash it.
8. You're pretty much done at this point.
Follow any guide to install a Hero ROM, to partition your microSD, etc. After you install a custom ROM, be sure to reinstall APN Backup and Restore from the market, and restore your APN settings. This will restore data.
well the "asroot" method of rooting from the guide in the CDMA forum may be worth trying...perhaps they haven't fixed the vulenrability?
http://forum.xda-developers.com/showthread.php?t=581577 (all the way up to before the recovery image)
Ya tried that method don't work
yeah I would love to root this thing.
To be honest this is my first smartphone and I'm new at this rooting thing. I did manage to throw on a hack for my ipod nano (colored version)
I'm loving this phone so far - got it first day they announced their new network. I'm so impressed
Did either of you buy another SD card? Where did you grab yours if you did?
My Telus Hero has been rooted since Friday.
Check it:
http://forum.xda-developers.com/showpost.php?p=4909063&postcount=16
Yeah I just saw. I'll get familiar with the process then update the first post.
Thanks a bunch!
I posted in the other thread (so... sorry for the double post), but I think that this thread is more relevant to the question/issue of rooting.
Could someone who still has the stock Telus ROM post the Baseband version? (Home -> Settings -> About phone -> Baseband version)
I'm just curious as to whether we Telus users should upgrade or downgrade the radio version after rooting the phone, as I seem to be having dialing issues (long distance numbers require a "+" in front of the "1" or it won't connect.)
I dunno if this issue would be related to the radio, or to the fact that there are no North American locales selectable within the custom ROM.
Stock Baseband
63.18.55.06DAU_6.35.08.20
Still wating to see how others are successful with rooting their Telus Hero.
sjeffrey said:
63.18.55.06DAU_6.35.08.20
Still wating to see how others are successful with rooting their Telus Hero.
Click to expand...
Click to collapse
Same here. My stock Telus Hero reports the same version as above (just to add to the data pool). I'll be watching this thread for more details on rooting.
I rooted using the goldcard>2.73.405>recovery>modaco2.9>IU baseband and it works no problem. I can dial 611, long distance numbers dont need a + or a 1 for that matter, and market enabler lets me buy paid apps. Device seems quicker. I had to try 3 different sd cards though. I know I was doing the first one wrong, but one of them definately did not work.
I mentioned in the other Telus Hero thread that I updated my radio to the IU version, and my dialing issues have gone away. Thought I should mention it here as well.
I'm still waiting for a method that doesn't require calling Telus to fix settings though.
Say, is your Hero the black or white one? And, is it a HERO130 or a HERO100?
I keep getting an invalid model ID error when I try flashing the downgrade. Is that what you had the times it didn't work for you?
Soaa- said:
I'm still waiting for a method that doesn't require calling Telus to fix settings though.
Say, is your Hero the black or white one? And, is it a HERO130 or a HERO100?
I keep getting an invalid model ID error when I try flashing the downgrade. Is that what you had the times it didn't work for you?
Click to expand...
Click to collapse
Yeah, I'm pretty sure that's the error I got when I didn't have a proper Gold Card. If you've tried the same SD card a number of times and it's still not working, maybe grab a cheap Sandisk 1GB card. That's what I used.
And you shouldn't have to call Telus, because I've already gone through the pain of figuring all this stuff out. Just make sure you grab the APN settings from the other thread, and update to the latest radio (IU) and you're good. A call to Telus was required because I couldn't receive MMS messages, but that had nothing to do with rooting the phone, I would've had to call them anyway.
When I look up "Model Number" in my phone's settings, it just says HTC Hero. So I dunno. The custom ROM probably did that. I guess.
the model name might be written in the battery compartment area. i know on my htc tytn the name is there as "HERM200"
pretty sure it was mentioned that the telus hero is HERO130
As profets said, the model ID is under the battery. Mine says HERO130, and in bootloader mode, it says HERO13000. Since the downgrade ROM is for HERO10000, it threw an invalid model ID error.
Soaa- said:
As profets said, the model ID is under the battery. Mine says HERO130, and in bootloader mode, it says HERO13000. Since the downgrade ROM is for HERO10000, it threw an invalid model ID error.
Click to expand...
Click to collapse
Ah cool. I just checked under the battery, it's a 130. So you should still be able to downgrade.
Really strange. I tried a Kingston 2GB like they said on the guide and verified that the GoldCard image was well written on the card. Yet it still throws error 130.
Soaa- said:
Really strange. I tried a Kingston 2GB like they said on the guide and verified that the GoldCard image was well written on the card. Yet it still throws error 130.
Click to expand...
Click to collapse
I used the 2GB sd card comes with the phone to create goldcard. Rooted.
No problem at all, I don't know why you guys wanna use other SD cards.
I'm pretty sure I've tried all my cards... I'll try again tonight.
Hah! Got it to work. Guide is done.
I also quickly put together a webpage to reverse the CID of the microSD. That way, people won't need to download QMAT anymore. The page can be found here: http://hexrev.soaa.me
Enjoy!
Hi everyone, I'm new to installing Android to the Vogue and I haven't the slightest idea where to start. I've tried multiple times but always seem to mess up with everything. Can anyone give me a step by step tutorial or even make the folders for me so that i can put it in my SD card, let me know and thank you guys for your help. Also if possible and anyone would want to help and make the folders for me I would like an eclair build.
were you planning on running android on NAND (which is where windows mobile is now) or off your sd card.
I was planning on running it off NAND, any suggestions?
Gere200 said:
I was planning on running it off NAND, any suggestions?
Click to expand...
Click to collapse
Your phone is already unlocked?
Seeing that you have never run Android before you may want to try a few builds on SD card first to see which one you like, and have the flexability to go back to Windows Mobile. A class 6 microSDHC card is pretty comparable to NAND speedwise in my opinion.
would recommend one of the donut builds (plemen, myn). both guys make a fast and stable donut, GPS and bluetooth work great. since I've got a bit of time, here's a step by step with links to take you from a ground zero unlocked vogue to running android on your nand (fastest way, replaces windows mobile). this has been written up a few times before, but today is your lucky day
read the entire set of instructions before getting started.
BEFORE STARTING
1. know that there are multiple ways to flash a rom to your phone. here are a few
a. using windows, get a flashing package from one of the xda devels, and replace the RUU_signed.nbh file in that package with whatever you are trying to flash (try NFSFAN's package, it has always worked well for me for this; some carrier packages don't work), renamed the same way
b. use a 2GB or smaller micro SD card with the .nbh named VOGUIMG.NBH in root, then place the phone in bootloader mode (see #2)
c. use linux and HTCFlasher - don't know much more about this method, find it here
2. if flashing from a computer, I always recommend flashing from the bootloader, NOT through active sync. enter bootloader: hold down power and camera, then press and release reset, wait for the tricolor screen. then connect to usb, and flash away
3. Flashing etiquette: I always flash everything twice, back to back, for good measure. while the phone is flashing, don't move it, don't open programs, don't surf the internet, just leave your phone and computer alone, hands off. and don't flash from a virtual machine; trust me, just don't.
4. Have patience. There are steps that will take minutes to complete. Just wait. If you are not sure is something is happening or if the phone is frozen, put the phone down and go do something else for at least 10 minutes.
GET STARTED
1. unlock your phone (cokeman's unlocker, hardSPL 2.31).
2. flash a "GPS capable shipped rom" from post 1 here. make sure you have working phone, working data, and working GPS (if you are on verizon and have problems getting GPS to work, see here - thx drewden123.
3. upgrade to the bell 3.42.50 radio, find the radio only version here. flash it the same way you flash any other ROM - you can use a rom package to flash it, just rename it to RUU_signed.nbh and replace the one in the package with it, then flash away)
4. download the necessary files. you'll need:
a. a rom in the form of androidinstall.tgz from this forum. a couple of great donut options are myn's and plemen's and plemen's
b. a .nbh found at sourceforge. the sourceforge page contains both stable builds, and the latest betas - don't know what to use? see this thread. choose your resolution based on the recommendations of the chef (the rom builder), also read here.
5. create a folder on the root of your micro sd card called andboot
6. place your androidinstall.tgz file in the andboot folder
7. flash your .nbh file by placing your phone in bootloader mode, and using one of the above flashing methods
8. as soon as the phone reboots (it should vibrate), hold down this button to enter the install menu like your life depended on it until the boot menu pops up
9. in the top half of the boot menu are your booting/file storage settings. for nand, select "sys on nand" and "data on nand" (other options will work too, but for your standard nand install, I would go with this)
10. go down to "1. install system" and click it. at this point it doesn't matter, but on the second screen that pops up go ahead and choose wipe data as well. when swapping between builds in the future, it is recommended to start with a new data file for best results. however, if it is the same class of build (i.e. between two donut builds), keeping your data.img file and simply using the "clear dalvik cache" should keep you running smooth without having to change all of your settings again.
11. wait for the install menu to re-appear. when it does, scroll down to "9. quit" and click it.
12. wait. keep waiting. in fact, step away from your phone. when you come back, turn the screen on, you should see the Donut lock screen!
OTHER NOTES
1. to reflash windows, simply enter bootloader mode, and flash your windows rom
2. buttons in android: see here.
wow thank you so much, this is exactly what I needed, once I get everything going I will let you know, currently I'm running NFSFAN's Final 6.5 ROM, its great and all but I need me some Android. Thanks again for your help and I will keep you posted.
tatnai said:
would recommend one of the donut builds (plemen, myn). both guys make a fast and stable donut, GPS and bluetooth work great. since I've got a bit of time, here's a step by step with links to take you from a ground zero unlocked vogue to running android on your nand (fastest way, replaces windows mobile). this has been written up a few times before, but today is your lucky day
read the entire set of instructions before getting started.
BEFORE STARTING
1. know that there are multiple ways to flash a rom to your phone. here are a few
a. using windows, get a flashing package from one of the xda devels, and replace the RUU_signed.nbh file in that package with whatever you are trying to flash (try NFSFAN's package, it has always worked well for me for this; some carrier packages don't work), renamed the same way
b. use a 2GB or smaller micro SD card with the .nbh named VOGUIMG.NBH in root, then place the phone in bootloader mode (see #2)
c. use linux and HTCFlasher - don't know much more about this method, find it here
2. if flashing from a computer, I always recommend flashing from the bootloader, NOT through active sync. enter bootloader: hold down power and camera, then press and release reset, wait for the tricolor screen. then connect to usb, and flash away
3. Flashing etiquette: I always flash everything twice, back to back, for good measure. while the phone is flashing, don't move it, don't open programs, don't surf the internet, just leave your phone and computer alone, hands off.
4. Have patience. There are steps that will take minutes to complete. Just wait. If you are not sure is something is happening or if the phone is frozen, put the phone down and go do something else for at least 10 minutes.
GET STARTED
1. unlock your phone (cokeman's unlocker, hardSPL 2.31). make sure whatever ROM you end up with on your phone has working phone, working data, and working GPS.
2. upgrade to the bell 3.42.50 radio, find the radio only version here. flash it the same way you flash any other ROM - you can use and rom package to flash it, just rename it to RUU_signed.nbh and replace the one in the package with it, then flash away)
3. download the necessary files. you'll need:
a. a rom in the form of androidinstall.tar from this forum. a couple of great donut options are myn's and plemen's and plemen's
b. a .nbh found at sourceforge. the sourceforge page contains both stable builds, and the latest betas - don't know what to use? see this thread. choose your resolution based on the recommendations of the chef (the rom builder), also read here.
4. create a folder on the root of your micro sd card called andboot
5. place your androidinstall.tar file in the andboot folder
6. flash your .nbh file by placing your phone in bootloader mode, and using one of the above flashing methods
7. as soon as the phone , hold volume up like your life depended on it until the boot menu pops up
8. in the top half of the boot menu are your booting/file storage settings. for nand, select "sys on nand" and "data on nand" (other options will work too, but for your standard nand install, I would go with this)
9. go down to "1. install system" and click it. at this point it doesn't matter, but on the second screen that pops up go ahead and choose wipe data as well. when swapping between builds in the future, it is recommended to start with a new data file for best results. however, if it is the same class of build (i.e. between two donut builds), keeping your data.img file and simply using the "clear dalvik cache" should keep you running smooth without having to change all of your settings again.
10. wait for the install menu to re-appear. when it does, scroll down to "9. quit" and click it.
11. wait. keep waiting. in fact, step away from your phone. when you come back, turn the screen on, you should see the Donut lock screen!
OTHER NOTES
1. to reflash windows, simply enter bootloader mode, and flash your windows rom
2. buttons in android:
-top power: short press = turn on power, wake screen, menu. 1-second long press = toggle keyboard. 2-second long press = toggle portrait/landscape orientation
-volume slider: volume
-camera: short press = back. 1-second long press = home
-green: short press = call log. long press = voice dialer
-red: short press = sleep screen. long press = phone option menu (power off, airplane mode, silent, etc)
-enter, direction keys = standard functions
Click to expand...
Click to collapse
If only we had someone to sticky this. Great post only need to add info about the market and resolution and I bet this forum would be 95% reduced in clutter.
berardi said:
If only we had someone to sticky this. Great post only need to add info about the market and resolution and I bet this forum would be 95% reduced in clutter.
Click to expand...
Click to collapse
see my new signature
When i just try to run haret it says that mkdir: cannot create directory '/system'
:File exists
sh: 2: unknown operand
it also says that it cannot find the system directory in the SD card??
tatnai said:
see my new signature
Click to expand...
Click to collapse
nice
tatnai said:
see my new signature
Click to expand...
Click to collapse
[borat voice] Very nice!
Now you'll just have to post in every thread "please see my signature"
Tatnai, I just want to thank you for your post. I was able to flash myn's build of andriod to nand yesterday after going through maybe five different threads(all with slightly differing methods). After reading your instructions, I am relieved that I did it correctly.
Quick a question just to verify. When I want to reflash to a newer build of andriod in the future, I'd just have to place the correct .nbh file in root, androidinstall.tar file in the andboot folder and hold volume up?
wfp said:
Tatnai, I just want to thank you for your post. I was able to flash myn's build of andriod to nand yesterday after going through maybe five different threads(all with slightly differing methods). After reading your instructions, I am relieved that I did it correctly.
Quick a question just to verify. When I want to reflash to a newer build of andriod in the future, I'd just have to place the correct .nbh file in root, androidinstall.tar file in the andboot folder and hold volume up?
Click to expand...
Click to collapse
they may be changing around the .nbh file stuff, so this answer is depending on what happens with that, BUT... you shouldn't need to flash a new .nbh to change your system unless you need to change resolution. if you don't, read on.
NOTE: the process is the same whether running on NAND, or on SD card (ext2 or regular sd). Just don't mess with the boxes at the top of the install menu that say where your sys and data are installed.
TO RUN AN UPDATE that someone has provided in their thread for their build:
1. place the androidupdate.tar in the /andboot folder on your sd card
2. reboot your phone, hold this button until you see the install menu
3. from the bottom portion of that menu, select "Install update". click yes on the popup menu that notifies you that this will adjust the system files.
4. wait. it will eventually finish and kick you back to the install menu
5. go to "quit" and click it.
TO CHANGE FROM ONE ROM TO ANOTHER (same class, i.e. donut to donut)
Note: if you have a data.img, you technically should be able to keep it while moving between ROMs of the same class (i.e. donut rom to a donut rom, or eclair to eclair rom). just make sure to clear the dalvik cache before the new one boots up. however, if there are any problems, the first thing you should then do is wipe your existing data.img using the install menu and the boot your new system allowing it to create a fresh one.
1. place the new ROM file (androidinstall.tgz) into the /andboot folder on the root of your sd card, overwriting any previous install file that was there before
2. reboot your phone, hold this button until you see the install menu
3. from the bottom portion of that menu, select "backup /data", then select "yes" to overwrite old backups (btw, you can rename any databackup.img in the /andboot folder to anything you want to keep multiple backups; when you want to revert to a particular data.img backup, just rename it to databackup.img before going to the install menu). this will give you a backup of your current data just in case something goes wrong. it will take a while to complete, and eventually take you back to the install menu.
4. from the bottom portion of that menu, select "clear dalvik cache". allow this to run, it will return you to the install menu when complete.
5. from the bottom portion of that menu, select "Install system". click "yes" on the popup menu that notifies you that this will overwrite the system files. a second popup will open asking if you want to wipe your /data, select "no" for this to keep your current data file. once it installs, you will be returned to the install menu.
6. select "quit" from the bottom of the menu. this should boot android. first boot after clearing the dalvik cache, installing a new system, or wiping a data.img will take a while, just be patient
TO CHANGE FROM ONE ROM TO ANOTHER (different class, i.e. donut to eclair, or cupcake to donut)
Note: I would not recommend keeping your data.img while switching between different versions of android.
1. place the new ROM file (androidinstall.tgz) into the /andboot folder on the root of your sd card, overwriting any previous install file that was there before
2. reboot your phone, hold down this button until you see the install menu
3. from the bottom portion of that menu, select "backup /data", click ok to overwrite old backups (btw, you can rename any databackup.img in the /andboot folder to anything you want to keep multiple backups; when you want to revert to a particular data.img backup, just rename it to databackup.img before going to the install menu). this will give you a backup of your current data for future use, i.e. if you decide to return back to that version of android. it will take a while to complete, and eventually take you back to the install menu.
4. from the bottom portion of that menu, select "Install system". click "yes" on the popup menu that notifies you that this will overwrite the system files. a second popup will open asking if you want to wipe your /data, select "yes" to delete the current data file. once it installs, you will be returned to the install menu.
6. select "quit" from the bottom of the menu. this should boot android. first boot after clearing the dalvik cache, installing a new system, or wiping a data.img will take a while, just be patient.
Thanks again for the information. I and I'm sure others appreciate it. I hope your FAQ thread will get stickied.
I keep get an error when I am trying to install from NAND, it says Kernel panic - not syncing: Fatal exception in interrupt, anyone have any clues?? I am trying to install SenseHERO 1.4 and I am using the NAND kit posted with the UpdateROM utility. Any suggestions?
Nice work
Is there anyone in nj that can help me install this damn android on the vogue.. ive tried all the methods and nothing seems to work.. can it be the microSD card?? the files im using?? ive been trying to use every single build out there and nothing seems to work..
This is a step by step guide to install ClockworkMod v08, a ROM of your choosing, Flash, and the Android Market fix. This guide assumes that there is no data on your device that is important to you. Back it up or prepare to lose it.
I do NOT accept responsibility for anything good, bad, or indifferent that may come from following this guide. This includes and is not limited to completely destroying your tablet. I highly recommend leaving your tablet plugged in while doing anything like this with your device. I have no idea what will happen if the battery dies in the middle of flashing a ROM (if anything…but better safe than sorry).
ALL THE FILES NEEDED FOR THIS GUIDE EXCEPT FOR THE ROM ITSELF CAN BE FOUND AT THE BOTTOM OF THIS GUIDE.
ROM XDA Pages (Look at these to pick what ROM you want to use.)
TnT Lite
VEGAn-Tab
CyanogenMod 7 (Gingerbread)
Notion Ink Adam ROM Port
You do NOT need to root your tablet to install a ROM on this device using this guide. All the after-market ROMs come pre-rooted so you don't need to root after installing either.
Part One – Install ClockworkMod v08
ClockworkMod is what will ultimately be used for all your flashing of ROMs, backing up, clearing cache, etc.
Step 1.
Download ClockworkMod v08 (This version has been found to work best...the newer version causes some issues with some ROMs.) There are two versions available; one for installing ClockworkMod from the internal memory, one for installing it from external memory (microSD/microSDHC card).
Step 2.
Unzip the file you chose (cwmod_internal.zip OR cwmod_microsd.zip) to the root folder on the storage option of your choice.
So, for example, if the storage option you chose has the drive letter “F:” assigned to it when hooked up to your computer, you would want it to look something like this…
A folder located at “F:\recovery”
A file located at “F:\update.zip”
Step 3.
Turn off your device.
Step 4.
Press the power button and the Volume+ button at the same time and release them when the Viewsonic splash screen pops up. You should see "Detect a recovery key pressed" pop up in the upper left corner of the screen.
Step 5.
Watch ClockworkMod install. This will not take long. Your tablet will reboot when installation is complete.
Step 6.
Enter ClockworkMod:
To get into ClockworkMod you need to shut down your device, then press the Power and Volume+ button (the same way you did to install ClockworkMod).
Navigating ClockworkMod: Vol+ and Vol- are to scroll up and down, the home button selects an option, and the back button backs up.
Step 7.
Re-Partition your Tablet:
In order to make sure the Android Market works correctly after installing any ROM, we must re-partition the device.
Select the advanced option at the bottom of the ClockworkMod menu, then go to “partition SD card”, for the first option select 2048, and for the second option select 0. This erases data on your tablet. Be prepared.
Part Two – Install a ROM.
A ROM (explained in very basic terms) is like Windows on your computer (assuming you’re not running Linux or Mac OS). Each ROM contains a customized version of Android that comes packaged with software, themes, and everything else you actually see when the device powers up. You install any additional apps you would like to use after installing the ROM. Beware, ROMs are device specific. You cannot reliably install ROMs designed for another device.
Step 1.
Now that your device is essentially empty, we need to be able to put files on it. ClockworkMod can do this for us. Connect your tablet’s USB cable from your tablet to your computer. Go to the ClockworkMod main menu, then navigate down to “mounts and storage”, and then select “mount USB storage”. The tablet’s internal storage will then be accessible from your computer. You will want to open it, and create a folder called “ROMs”.
Step 2.
Download whatever ROM you want to use. The links to the ROMs are located above. Click on the link to see what that ROM looks like. The most popular ROMs for this device are TnT Lite and VEGAn Tab.
Step 3.
Copy whatever ROM you wish to install (it should be a .zip file) to the ROMs folder on your tablet. (Leave it zipped, Clockwork will install it from the .zip file as is).
Note: If the ROM you downloaded has multiple files, look for the one named “update.zip” and rename it to whatever you want (something to help you differentiate it from other ROMs), then copy that to the tablet. If an “update.zip” doesn’t exist, and you’re lost…read through that ROM’s thread and see if anybody else asked about it…if not then you probably should (on that ROM’s thread…each one is different).
Step 4.
Turn off your device.
Step 5.
Boot into ClockworkMod. (Press the power button and the volume+ button at the same time until the Viewsonic splash screen pops up, release, then you should see “Detect a recovery key pressed”. After that it will think for a few seconds and then it should boot into ClockworkMod)
Step 6.
Stand up and do a dance. Sitting too long isn't good for you.
Step 7.
Back up to the main menu, then navigate down to “mounts and storage”. When that is highlighted press the home button to select it.
Step 8.
We want to mount “/system” and “/data”.
The goal is to see the following:
“unmount/system”
and,
“unmount/data”
If either one says “mount” instead of “unmount” you need to navigate to that line and press the home button to mount it.
Step 9.
This is the step that we actually flash the ROM in.
From the ClockworkMod main menu, navigate down to “install zip from sdcard” and press the home button to select that option at the menu.
Then, navigate to “choose zip from sdcard” and press the home button to select that option.
Navigate to the line that reads “ROMs” and press the home button to select that option.
Navigate to the line that reads whatever .zip file you wish to install and press the home button to select that option.
Navigate to the line that reads “Yes – Install yourzipfile.zip” and press the home button to select that option.
You will now see it do its thing. When complete you will see something along the lines of “install zip from sdcard complete” at the bottom of the screen.
Press the back arrow over and over again until you get to the Clockwork’s main menu.
Step 10.
Here is where we prepare the system to run the new ROM.
Navigate down to “mounts and storage”, select it, and mount “/system” and “/data” again as in steps 7 and 8.
Back up to Clockwork’s main menu.
Navigate to “wipe data/factory reset”, select it. Navigate down to “Yes – delete all user data”, and select it to wipe out user data and all the cache. (You need to do this for the new ROM to function correctly)
Now, navigate to the top option “reboot system now” and select it. Your tablet will now reboot. It may take up to 15 minutes to start up the first time as it rebuilds the user data and cache for this ROM.
If your tablet boots to UID errors, or has force closes (known to fix a few of them)…
Press and hold the power button to shut the device down. Boot back into Clockwork. Select the advanced option at the bottom, and then go to “Fix Permissions”. Afterwards, back out to the main menu, then select “reboot system now”. If that is unsuccessful then boot back into Clockwork and redo steps 7-10.
Part Three – Install Flash and fix Android Market
This is needed to view websites with Flash based content, and to download apps from the market. (Fairly obvious, I know, but just in case somebody doesn't know.) Log in/set up your Google Account before trying the market fix (steps vary on the ROM you are using…in most cases you can access the web accounts by opening the Contacts app, pressing the menu button (the one above the back button), and selecting accounts).
Step 1.
Download “Adobe Flash Player 10.1.120.1.apk” which you will find attached at the bottom of this post and save it on your tablet (I recommend creating a separate folder to save .apk files in).
Step 2.
On your tablet open up whatever file explorer comes pre-installed with the ROM you’ve selected. In there, open up where you saved your .apk, then select Adobe Flash Player, and follow the on screen instructions to finish installing that.
Step 3.
Open the Market app. Once it loads close it (press the home button).
Step 4.
Go into Settings - Applications - Manage Applications - Market - Clear CACHE - Force Stop
(For TnT/TnT Lite... Settings - Applications - System Applications)
Step 5.
Press back once - Google Services Framework - Clear DATA - Force Stop
Step 6.
Go back to your home screen and open up the market. You should get an error. If not, redo steps 4 and 5 until you do.
Step 7.
Reboot your device. After it starts back up let it sit for a minute or two to let things in the operating system normalize. Open the Market. Reboot your device.
Step 8.
Open the market again and enjoy. You should now have Flash and the Android Market.
This is the Titanium Backup method. Thanks to roebeet, xguntherc, and KorbenD.
http://forum.xda-developers.com/showthread.php?t=845175
Part Four – Show your appreciation! (First, be sure to play some Angry Birds)
I encourage everybody to take the time to send a kind message, or a small donation, to everybody that helped make this device what it is. This is not me saying "HEY HEY DONATE TO ME!!!!"...like some developers for other devices do. I just feel like the great ROM developers for this device don't get the credit they deserve, so please at least send them a quick thank you note. Keep in mind that ROMs, utilities, and yes (even guides), take a considerable amount of time to plan, compile, test, fix, and distribute.
With the following link you can donate as much or as little as you would like to me (even a dollar helps). Thanks and enjoy your tablet!
Donate Here
Thank You. This is exactly what we need. One thread with all the info consolidated into one will help many new users understand what to do. People otherwise may have come here and just been blown away by the different threads, I sure was when I first decided to Root my Eris.
scsione889 said:
This is a step by step guide to install ClockworkMod v08, TnT Lite 2.2, Flash, and get the Android Market working. This guide assumes that there is no data on your device that is important to you. Back it up or prepare to lose it.
...
Part Three – Install Flash and fix Android Market
Step 1.
Create a folder on your SD card called APKs. Download “Adobe Flash Player 10.1.120.1.apk” and "TitaniumBackup_latest.apk" which you will find attached at the bottom of this post and save them in that “APKs” folder on your SD card.
Step 2.
On your tablet open up “ES File Explorer”. In there, open up the “APKs” folder, then select Adobe Flash Player, and follow the on screen instructions to finish installing that. After that, select Titanium Backup in that same folder, and install the same way.
Step 3.
Go into Settings – Applications – Manage Applications - and Force Stop both the Market and Google Services Framework apps.
Step 4.
Open up Titanium Backup, go to Backup/Restore and look for Google Services Framework, select it, then select “Wipe Data”
Step 5.
Go back to your home screen and open up the market. You should get an error. If not, redo steps 3 and 4 until you do.
Step 6.
Reboot your device. After it starts back up let it sit for a minute or two to let things in the operating system normalize. Open the Market. Reboot your device.
Step 7.
Open the market again and enjoy. You now have Flash and the Android Market. (Keep in mind, this is not the FULL market, it just makes around 99% of it available. It is unknown which apps are not available. There is a full market fix, but it is MUCH more complicated).
Click to expand...
Click to collapse
Extremely Well Done!
Would be Nice to get this Stickied to keep easy for newbies to find...
Comment on Section 3... I simplified this by removing Steps 4 and 5 and modifying Step 3 to;
Step 3.
Go into Settings – Applications – Manage Applications - and Force Stop both the Market and Google Services Framework apps, [ADD] also 'Clear Data' on 'Google Services Framework' (after stopping it in same screen).
So removes the Need for TB in this proceedure, though TB is always something worth having...
Also I only needed the first reboot in Step 6, wait a few minutes then tried Market and all was fine! No multiple reboots needed for me at least...
Nicely done.
Can you explain in a little more detail why step 8 is needed?
I have already done everything in this post and my tab seems to be working great but never did anything like step 8. I did do the wipes in step 10 so just curious.
LTL11 said:
Nicely done.
Can you explain in a little more detail why step 8 is needed?
I have already done everything in this post and my tab seems to be working great but never did anything like step 8. I did do the wipes in step 10 so just curious.
Click to expand...
Click to collapse
This technically isn't needed for TnT Lite...but if people were to use this guide as guidelines for installing other ROMs (as I hope people would do...you know...following directions is good, but learning what your doing is GREAT), step 8 is something that is always good to get in the habit of doing before a flash.
With many other ROMs, on this device and others, not mounting /data and /system before flashing causes headaches.
jtbnet said:
Comment on Section 3... I simplified this by removing Steps 4 and 5 and modifying Step 3 to;
Step 3.
Go into Settings – Applications – Manage Applications - and Force Stop both the Market and Google Services Framework apps, [ADD] also 'Clear Data' on 'Google Services Framework' (after stopping it in same screen).
So removes the Need for TB in this proceedure, though TB is always something worth having...
Click to expand...
Click to collapse
I did it using 'Clear Data' as well...but this was my way of getting newbies to use TB (and to get more familiarized with side-loading apps). It's a great utility that I feel Android users should be familiar with.
Great guide, added clarifications
The only complication in following these instructions came when I could not locate my /sdcard2 folder using Clockworkmod. Once clockwork was installed using the removable SD card (as suggested), I moved all of my other files to the internal /sdcard folder, as it was the only one (easily?) discoverable. This guide was the only one useable for this android noob.
Tommunicator said:
The only complication in following these instructions came when I could not locate my /sdcard2 folder using Clockworkmod. Once clockwork was installed using the removable SD card (as suggested), I moved all of my other files to the internal /sdcard folder, as it was the only one (easily?) discoverable. This guide was the only one useable for this android noob.
Click to expand...
Click to collapse
Yes, it seems the clockwork version on this guide, does not redirect to SD2 for installs.
You must put them on the internal storage.
omnifox said:
Yes, it seems the clockwork version on this guide, does not redirect to SD2 for installs.
You must put them on the internal storage.
Click to expand...
Click to collapse
Sorry about this guys. Editing it now.
FIXED.
After I got tnt and market working I see the apps but I can't get any of them to download they all fail
thanks in advance
Kevin
kevin stone said:
After I got tnt and market working I see the apps but I can't get any of them to download they all fail
thanks in advance
Kevin
Click to expand...
Click to collapse
Does it display an error? Please be a little bit more specific. Did you try restarting the tablet (not just putting it into standby and bringing it back up)? Also, were you sure to force close the apps before clearing the data?
I did all these steps last night and everything seemed to work as expected. When I woke up this am and actually started to play with the Market, I realized that even though the Market looked good last night, all the important apps are gone this morning. I followed the instructions on the forms and on youtube videos and got the exact same results that were to be expected. I got all the errors and rebooted when asked and thought I was ok. When I opened Market after the Fix Process, all the same apps I would see on my HTC Evo are there. HOWEVER !! once I try to search or change the category to Apps or Games, or go to the sub catagorys 90% of the apps disappear. My app / game selection is now only 1 page long
When Market first opens up, I see Angry Birds and other apps I want, in the category description, but when I try to navigate to them, the screen simply says "loading" and never come up. It will stay that way for over an hour. The only thing I can do is change another catagory. When I do that, the loading text goes away and apps will show up, but alot are missing. Even the category description like for "Action Games" no longer lists Angry Birds in it. And if I try to search for an app I know is in the market like Advanced Task Killer... it says it can't be found.
I repeat the Market Fix process over and over and over again with the exact same results. Any Idea? Everything else seems to be working fine. Flash and Titanium Back up work perfect. Just can't get Market to show all the content.
I just picked up one of these and I'm trying to get this going, but when I mount it to the computer, it doesn't see my 2gb sd card.. The tab see's it fine, but not windows...
Any suggestions?
edit - Got it working... Although it may be getting returned later on. =\
You guys rock!
Picked up my GTab today @ Staples. 45 minutes later it's ready to go with TnT 2.2, full Market access and Flash using this guide! So far...so good!
Thanks for taking the time to write up this guide. Saved me from the slower-than-molasses-out-of-the-box-os-setup they shipped the tablet with.
Can't access Gtablet VIA USB cable from PC
I installed CWM 8, TNT lite 2.2 and performed market fix. Now my Gtab is working great. Prior to this thread I was stuck in a loop. My gtab is running great thanks a lot for posting this tutorial.
My only issue now is I can't access the internal SD from PC. Nothing shows up on my PC when I connect the USB cable to my Gtab. I have tried unmounting and mounting SD several times in CWM.
Prior to this update I was able to access and sideload APK's on my gtab running stock software with Viewsonic update.
any help would be greatly appreciated.
Wyngnut
Well after booting up a couple of times it just started to work (my Gtab showed showed the SD card option). I have downloaded several programs and they all install automatically and every one of then worked. No sideloading no additional steps for install this is amazing. I was coveting the windows 7 tabs on the horizon but the free programs available through the market are amazing and when they are Combined with the Gtab hardware its amazing.
Thanks again for posting this there is no way I would have tried to put this software on my system if I had not seen this guide.
Wyngnut
sano614 said:
I just picked up one of these and I'm trying to get this going, but when I mount it to the computer, it doesn't see my 2gb sd card.. The tab see's it fine, but not windows...
Any suggestions?
edit - Got it working... Although it may be getting returned later on. =\
Click to expand...
Click to collapse
The tablet doesn't seem to like giving the PC access to the microSD card. As far as I know this is a feature that is not available in any ROM. Also, it is my understanding that for this sort of thing to be possible we need to have the device's source code so we can make the hardware/software mesh better.
That is...unless I'm missing something very obvious...which is totally possible.
Thank you so much for taking the time to write this, worked perfectly for me
It's AMAZING!
Thanks to everyone on the site - from Roebeet and pals who pulled it together to scsione889 and others who did the walkthrough. For an absolute newbie (didn't know what "root" meant) to be able in one day to turn an absolute clunker into what I have now is unbelievable.
If you're new like me, and wondering whether you can pull it off, you can. Just make this the one time in your life when you read and follow the instructions exactly, without your usual improvisation!
The Problem
The HTC Droid Incredible shows a "Low on space: Phone storage space is getting low" warning despite having gobs of space free because the "Application data storage" folder (also known as /data/data) that is shared by all apps on the phone is only 150mb in size. As soon as only 10% of this folder is available, the warning appears. If it gets too much lower, apps stop responding and the phone crashes.
The Story
After many months of clearing app data, uninstalling apps, resetting my phone, and generally walking on eggshells trying to keep my data storage under the limit, I was getting ready to upgrade my device. I would search every few weeks to see if anyone had solved the problem, but all I found were more people stuck in my boat, and I was ready to give up. But then I stumbled across a series of threads on xda-developers.com that gave me new hope. In the course of one night, I learned from scratch how to root my phone, and I applied a fix that increased the "Application data storage" folder to a whopping 750mb. I am now able to download as many apps as I'd like and not have to worry about clearing out app data ever again.
However, it took a bit of scouring the forums and reading various guides to figure out how to do all this. Some of the items are quite technical in nature, and some of the guides skip steps that more experienced users would know how to do already. So I joined the forum to write this guide for the "regular" users out there like myself. My goal is to explain in plain English how to fix this nagging issue once and for all and to consolidate all the relevant info and files into one place. If you find this useful, please share this with others so we can all fully enjoy our phones!
The Credits
I did not invent any of the steps, tools, or methods I am about to describe. Hats off to the following people for supplying all the info and files I needed to fix the problem and write this how-to thread. Please let me know if I've missed anyone that should be mentioned and I will add them.
vbhines for the "New to Modding/Rooting" guide
The unrevoked team for their excellent one-click rooting software and drivers
dreamersipaq for the guide to rooting an Incredible
scotty1223 for the guide to rooting a 2.3.4 Incredible
jermaine151 for the "no data limit" mod that actually fixes the problem
cmlusco and tiny4579 for all their help answering questions and troubleshooting in this thread
The Ingredients
Here's what you'll need to perform this fix:
An HTC Incredible (obviously) with an SD card
A micro USB cable (you can use the one you charge your phone with)
A computer with a USB port and internet access (PC, Mac, or Linux)
An hour of free time
The Fix
Step 1: Read the "New to Modding/Rooting" guide so you know what you're getting into and can understand the terminology: http://forum.xda-developers.com/showthread.php?t=744807
Step 2: Back up your contacts, pictures, etc. This guide is safe for your phone and will not erase any of your data if you follow it correctly, but it never hurts to back things up just in case.
Step 3a: Make sure your phone is decently charged. (at least 50%)
Step 3b: Make sure your phone isn't currently showing the "low on space" error. Delete some apps or data until the error goes away. You don't want to go through all this effort only to have your phone crash halfway through!
Step 4: Uninstall HTC sync software from your computer. Also make sure you are not running any software that communicates to your phone using USB, such as PDANet or DoubleTwist. If you haven't had to plug your phone into your computer to do anything prior to now, you're probably OK.
Step 5: On your phone, go to Menu -> Settings -> Applications -> Development and put a check in the "USB debugging" box.
Step 6: Plug your phone into your computer, select "Charge Only", select "remember my selection", click "Done", and then unplug your phone.
Step 7: If you are on a Windows PC, follow this user-friendly guide to install the USB drivers you'll need: http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
When I did this step, I actually found my Android entry from the first screenshot in the guide under "Android Phone" and it did not say "Android 1.0". Don't worry, you can still use this entry to continue with the next step in the guide to "Update Driver Software".
Mac and Linux users can skip this step.
Step 8: Root your phone. This step is a bit more involved, so be sure to read the directions carefully. On your phone, go to Menu -> Settings -> About phone -> Software information and look at what it says under "Android version" at the top.
If it says 2.3.4, do this:
Download Clockwork 5.0.2.0: http://dinc.does-it.net/Recoveries/CWM_5.0.2.0/PB31IMG.zip (link updated 6/22/12)
Extract the recovery-clockwork-5.0.2.0-inc.img from the zip file and put it somewhere you'll remember.
Download Unrevoked 3.22 (this is intentionally NOT the latest version): http://dinc.does-it.net/Unrevoked/Unrevoked_3.22.exe (link updated 6/22/12)
Run Unrevoked_3.22.exe
Inside the program, go to File -> Custom Recovery and select the .img file from above. At the bottom of the program window, it should now say "Recovery: Custom" and "Waiting for device"
Plug in your phone and wait while Unrevoked runs automatically. It will reboot your phone several times and will take some time, so be patient!
Once it's done, unplug your phone and ensure that a "Superuser Permissions" application is inside your app drawer. Don't run it. Instead, go to Menu -> Settings -> Applications -> Manage applications -> All, scroll down to "Superuser Permissions", click it, then click "Clear data". Return back Home.
If it says anything other than 2.3.4, do this:
Download Unrevoked 3.32: http://www.unrevoked.com/recovery/
Run reflash_package.exe. It may start up right away, or it may ask you to extract the files. Put them somewhere you can find, and once the extraction is done, find and run reflash.exe.
Plug in your phone and wait while Unrevoked runs automatically. It will reboot your phone several times and will take some time, so be patient!
After the above steps, everyone should do this:
Launch the Android Market and search for "ROM Manager". The first result should be "ROM Manager" by ClockworkMod and it should have a picture of a top hat above a gear as its icon. Click it, then click "Download", then "Accept & download". If it is already installed, you can just return Home.
Once ROM Manager has finished installing, launch it and select "Flash ClockworkMod Recovery" (the first option). Confirm your phone model (HTC Incredible). A window will pop up asking for root permissions - click to allow it.
Optional: After the download completes, scroll down and click "Backup Current ROM". You may need a lot of space free on your SD card to perform this backup depending on what you have on your phone. Once you create this backup, you can use ROM Manager to fully restore your phone (including all apps, data, and settings) in case anything goes wrong. This can take a significant amount of time, so again, be patient!
If all went well, your phone should be exactly the same as it was before, except you now have a couple new apps, and more importantly, root access!
Step 9: On your phone, go to Menu -> Settings -> Applications -> Development and uncheck the "USB debugging" box.
Step 10: Apply the Fix. This is the step you've been waiting for!
Go to this thread: http://forum.xda-developers.com/showthread.php?t=1623038, click the link for the EXT4All files in the first post, download "Convert2Ext4_no_data_limit_normal_dalvik.zip", and put it somewhere you'll remember. You can also go directly to this URL to download the file: http://dinc.does-it.net/EXT4_Mods/ (links updated 6/22/12)
Plug your phone into your computer, bring down the notification bar, select the "USB connection type" item, select "Disk drive", and click Done.
On your computer, find your phone's SD card. If you're unsure which drive is your SD card, look at how big each drive is. The drive that has a size of 6.59GB is the phone's internal memory, so the other drive is the SD card. The SD card that comes with the Incredible is 1.83GB in size, but yours may be different if you bought your own SD card.
Move "Convert2Ext4_no_data_limit_normal_dalvik.zip" from your computer to the SD card. Do not put it inside any folders.
After the file has finished moving, bring down the notifications bar, select the "USB connection type" item, select "Charge only", then click done.
Unplug your phone from your computer.
Launch ROM Manager from your app drawer and click "Reboot into Recovery" (the second option). Click "OK" to proceed.
After the phone reboots, you will now see a black screen with some blue options on it. Use the volume buttons on the left to scroll down to "install zip from sdcard" and click the optical trackpad button at the bottom of the phone to select it.
Click "choose zip from sdcard" (the first option)
Scroll down to the very bottom and select "Convert2Ext4_no_data_limit_normal_dalvik.zip"
Scroll down to "Yes - Install Convert2Ext4_no_data_limit_normal_dalvik.zip" and click it. This step will take some time to complete, and the progress bar may not move at all. Be patient!
Once it is done, click the power button at the top of your phone until you're back at the main menu, then select "Reboot system" (the first option). If you hit power too many times and end up with a blank screen, just hit power one more time and you'll see the menu.
When the phone is done rebooting after this last step, verify that the fix worked by going to Menu -> Settings -> SD & phone storage and look at the "Application data storage" section. It should now say that the "Total space" is 748mb!
At this point you can run happily through an open field, shout from the highest mountaintop, or just shed a tear of joy, because you can now install tons of apps and let them accumulate all the data they want. Enjoy!
P.S. Please let me know if any of these steps are incorrect or unclear so I can fix them. Thanks!
Troubleshooting
Here are a couple of issues people have come across while doing the steps in this guide, along with the solutions. Thanks to cmlusco for these helpful answers!
The guide says my phone should have rebooted back to the main screen, but I'm on a black screen with a bunch of blue options!
If you're on this step and the guide doesn't say you need to be here yet, just use the volume buttons to scroll to the "Reboot System Now" option and click the optical trackpad. Then you can continue on with the guide!
I'm stuck on a black screen with white bars on the side!
If your phone is "s-off", reflash the recovery-clockwork-5.0.2.0-inc.img file from Step #8 using hboot. To get to hboot, turn your phone off, hold the "volume down" button, and turn it back on. Keep holding the "volume down" button until you get to the menu where you can flash the .img file.
If your phone is not "s-off" or you have no idea what "s-off" means, run Unrevoked again with the same .img file from Step #8.
In either case, you should be able to continue using the guide from where you left off!
My phone keeps rebooting over and over and I can't do anything!
Pull out the battery, wait for 15 seconds, and put it back in and turn the phone back on. If it still keeps rebooting, pull out/re-insert the battery again, go into hboot (see above answer) and try the following steps. You can stop as soon as one of them works!
1. Restore a backup that you made in a previous step (if you have one).
2. Reflash the .img file from Step #8.
3. Flash the .img file here: http://dinc.does-it.net/wildstang83_inc_4.08.605.2_11232011.zip (note: this one will take you back to stock, so you'll have to start the guide over).
I'm still stuck!
If all else fails, please post your issue in this thread so someone can help you out. You can also try restoring your backup (you made a backup, right??) and starting over from the top. Good luck!
Potential Alternate Solution
Soniclude that was a great very detailed write up. Here is another option that I found that seems to also solve the dreaded low disk space...
Since you clearly outlined the steps for rooting your device, I wont go into that. But, why stop at fixing one of the most annoying stock problems. Rooting is half the battle to flashing a new rom - which is precisely what I did to stop the LDS issue.
I used to use CM7 and then flashed over to MIUI but recently I flashed the best rom I have used to date - ICS-Dinc AOKP (]http://forum.xda-developers.com/showthread.php?t=1475936) which is a full fledged ICS port for your OG Dinc.
Since then I have not received any LDS errors (although I have not been using this ROM that long) but I would assume that it would be similar to my lengthy experience with CM7, in which I never got the LDS warning.
Here is what my device displays as available space for applications
View attachment 895332
As you can see I have used 144MB with 604MB free for a total of 748MB, identified as internal storage.
Also, just so you can see that this ROM is not an ICS overlay and is truly a port, here is the device info
View attachment 895331
72ls1's (the dev for ICS-Dinc AOKP) has some really good directions and make the process very easy.
For those that are interested and need a few more additional details, here are a few things that helped me:
1. Make sure you have backup your device data, this includes your apps, contacts (you should be just setting all contacts to sync with your gmail account to begin with), messages and email settings. Use an app like Titanium Backup for apps; Backup and Restore app for messages; Call Log Restore for calling
2. Download the zip files outline in the ROM posting of your chocie to your sdcard; They should be placed at the top level of your sdcard, meaning not in another folder. The zip files for ICS-Dinc AOK include the ICS-Dinc zip, Gapps (use this one gapps-ics-20120207-signed.zip - http://goo-inside.me/gapps/gapps-ics-20120207-signed.zip), and Tiamat Kernel
3. In Recovery make a backup of your device (in case you need to flash back due to an error)
4. Within Recovery prior to flashing the rom make sure to unmount data, sdcard and cache
5. Then clear cache and dalivik-cache (this one is under the advanced options)
6. Do a factory reset
7. Install from zip in the following order: ICS-Dinc AOK V.02, Gapps, Tiamat
8. Reset your device
Now go enjoy the goodness of a fresh ice cream sandwich!
Hope this helps anyone else out there in either the low disk space issue or that is having questions about flashing a rom.
Where is Unrevoked 3.22?
I'm going to use the downgrade-and-reflash method to root my 2.3.4 Incredible and after reading the forums have spent the supper hour looking around for Unrevoked 3.22. There was a megaupload site that always says bandwidth is exceeded, and one more that I found where everything is in a language I can't decipher.
Does anybody have a working link to 3.22? All I want is to turn on my stupid wireless hotspot so my wife can use her Ipad in teh car without having to pay Verizon another $30 a month for access to data I already have. Argh!
Thanks,
Ryan
Captainjerky said:
I'm going to use the downgrade-and-reflash method to root my 2.3.4 Incredible and after reading the forums have spent the supper hour looking around for Unrevoked 3.22. There was a megaupload site that always says bandwidth is exceeded, and one more that I found where everything is in a language I can't decipher.
Does anybody have a working link to 3.22? All I want is to turn on my stupid wireless hotspot so my wife can use her Ipad in teh car without having to pay Verizon another $30 a month for access to data I already have. Argh!
Thanks,
Ryan
Click to expand...
Click to collapse
You can actually acomplish that without rooting.
Open dial pad and type ##778# and hit call.
Select edit mode and enter six zeros (000000) as the password.
Select security and look for S.IP DUN username, it should look something like this [email protected]. Change it to be [email protected], just remove the "dun.".
Back out to the main menu and select M.IP Default Profile. Look for DUN NAI and change it to be [email protected], remove the "dun."
Hit the menu button and select commit modifications. Your phone will reboot.
Now just use the stock 3g mobile hotspot app. When you first open it it will say you have to have a subscription and pay, just procede you will not be charged, and verizion is none the wiser. I have been doing this my self for over a year now.
Compass sensor broken
Somebody has the same issue? after flashing the zip i cannot use correctly the compass sensor, for example in SkyMaps app.
This is by far the best tutorial out there to gain root and achieve s-OFF I've come across. Thank you SIR for your time and tutorial. Just EXCELLENT!!
for me the issue was my data/data folder (hint dont sync 1500 facebook friends and never do it with high res pics and with two differant apps haha) =] jsut removed all the contacts i didnt need and turned off the sync from normal facebook app and working perfect now
stuck in loop
I followed the instructions for the 2.3.4 and after I applied the Convert2Ext4_no_data_limit_normal_dalvik fix I got stuck in a loop with at the HTC Incredible boot screen, not sure what to do now.. can only get back to the recovery mode. Not sure what to do from here
scals37 said:
I followed the instructions for the 2.3.4 and after I applied the Convert2Ext4_no_data_limit_normal_dalvik fix I got stuck in a loop with at the HTC Incredible boot screen, not sure what to do now.. can only get back to the recovery mode. Not sure what to do from here
Click to expand...
Click to collapse
If you made or have a previous roms backup. Just wipe everything in mounts and storage menu except sdcard and emmc, then restore your backup. If you dont have a backup flash a fresh rom.
You kind sir are a gentleman and a scholar. That "low space" bug has been annoying me since July 2009. I greatly appreciate you breaking down the l337 sp33k to plain English.
THANK YOU THANK YOU THANK YOU THANK YOU
Captainjerky said:
Does anybody have a working link to 3.22?
Click to expand...
Click to collapse
downloads.unrevoked.com/recovery/3.22/reflash_package.exe
---------- Post added at 01:19 PM ---------- Previous post was at 01:11 PM ----------
Thank you for the spectacular write-up, soniclude!!!
Is there a particular reason that you did not suggest using the no_data_limit_dalvik_moved mod?
Does it not work?
[/COLOR]Thank you for the spectacular write-up, soniclude!!!
Is there a particular reason that you did not suggest using the no_data_limit_dalvik_moved mod?
Does it not work?[/QUOTE]
I agree that this was an excellent how to. Thanks for the effort.
I used the no_data_limit_dalvik_moved mod and for some reason, my phone became really laggy. I'm on Pons CM7. 2. Now I'm a little hesitant to use any of the ext4 mods b/c I don't understand them too well. I'm not clear on why there is a partition in the first place. Why htc devs made it so small... Homework to do.
Sent from my ADR6300 using Tapatalk
Thanks cmlusco I used your method to unlock the 3G Hotspot on my phone and it worked like a charm.
Issue in Step 10
Thank you very much for the easy to follow directions soniclude. I went through all the steps and when I got to step 10, I ran into an issue. After clicking on "Reboot into Recovery" the phone restarts and goes to the white htc screen. After that the screen just goes black with thin white lines down the sides and stays like that. So I never see the blue options. Has anyone come across this? If so, what do I do from there?
I get the message: failed to root. is your firmware too new? What now?
Is there anything I can do now to revert my firmware so I can gain root.
joeyz400 said:
I get the message: failed to root. is your firmware too new? What now?
Is there anything I can do now to revert my firmware so I can gain root.
Click to expand...
Click to collapse
If your on 2.3.4 you need to follow this guide http://forum.xda-developers.com/showthread.php?t=1306400 to root and get s-off.
I understand I could downgrade to 2.2 to get s off but only after I gain root. It seems I can't get rooted because I am running 2.3?
---------- Post added at 06:58 PM ---------- Previous post was at 06:53 PM ----------
It looks like the only step diffrent from the link you posted and this one is to run unrevoked as admin
I think I know what is wrong. The link to Unrevoked 3.22 is not working so I googled it and 3.22 came up but it was actually 3.32 that was downloaded and I can't find 3.22 anywhere. Does anyone have a copy of 3.22?
I found the correct 3.22 and now my Incredible is Incredible!!!! Rooted and it feels so good
Thanks for such a great thread!!!!
SWEEEEEET This worked awesome.