Hello,
I just received HTC Touch pro 2 and I see only "Windows Mobile-based Device" under network adapters in the device manager when I plug in the USB cable into my notebook (Win XP).
However, I need to have modem and diagnostic port. Could somebody help me how to do it?
Please, help in details since I am new in HTC world..
Thanks a lot and your reply will be much appreciated.
Best regards,
Lucky-Luke
Related
I have a new htc tytn that I'm trying to hotsync with my notebook vaio, with a windows xp, but I don't get it. The computer dont recognize the device (it shows "not connected", despite the connection by a USB cable. I did all the recomendations of the guide book, but it did'nt work. Anyone have any idea?
find the usb to pc icon
find the usb to pc icon
it is either in settings/connections or in settings/system in most of the roms I have seen.
open it up and see if the box is check for advanced network functionality. If so, uncheck it. That has had to be changed for all Windows Mobile 6 and 6.1 devices I have had, then activesync started working.
try active synch 4.5
You can also download ActiveSynch 4.5 if you have WM6/6.1.
hotsync is for palm based devices....
I know that this subject has been posted before and i have searched and searched everywhere for the answer and came up empty handed...
my problem is that when i hook up my touch cruise to my windows vista 32bit it give me and message saying "USB device not recognized, device has malfunctioned"
tired several of cables and devices and it will connect with my tilt but not the cruise...i also rebooted both device and computer...i also upgraded windows device center...
has anyone found a fix...or is there a driver that i need to install...i am running duttys rom...been away from the cruise forums due to i was using an iphone...please help on this situation...thanks in advanced...
hi
i have touch2 t3333, when i connect it to any pc , it doesn't recognise the phone, it charges ok but wont let me do disk drive or active sync
the phone is unlocked and was on the T mobile network and has that branding
has any one any ideas
thanks in advance
Dave
What operating system are you running on the PCs you are trying to connect to? If it is pre-Vista then you will need active sync running. If it is Vista or 7 it should recognize the phone as a mobile device. Try a soft reset while connected. I've had to do this with one of the pdas I've had. Also if you are connecting to a usb hub it might tell you it is charging but might not actually be connected. Try connecting to a usb port on the pc or another usb port if it has two.
HI!
Look at:http://forum.xda-developers.com/showthread.php?p=6912114#post6912114
Thanks guys will have a go now
I have a problem synchronising my HTC Touch P3452 (also called T-Mobile XDA Touch / the model with 256 Rom / 128 Ram).
Simple: It doesn't work.
When I connect the USB cable the batterie starts being charged, but there is neither the typical Windows sound when an USB device is connected, nor does the "Windows Mobile Devices Centre" recognize the device.
When I try to start the active sync connection in the connection manager of the HTC touch it tells me to install the synchronising software first or to configure an exchange server.
Enabling or disabling the hook for "advanced network functions" in the "USB to PC" settings of the HTC touch connection options makes no difference.
Some infos:
ROM-version: 2.81.111.1 GER
Rom-date: 08/29/07
ExtROM-version: 2.81.111.103
I'm using Windows 7 Professional 64bit, DHCP-device-service is active, all updates are installed.
I'd try updating the firmware, but obviously it's not possible without a working active sync connection.
PS: My older HTC Touch P3450 (128/64) has no problem at all. I connect it, it starts synchronising. The HTC Touch 3452 is from a friend of mine and when I asked him he said he was able to synchronize, but under Windows Vista. I don't see why it shouldn't work in Windows 7.
Hi
Ì don't have Win 7 but I think I read somewhere you have to put it in compatibility mode with Win xp
Edit: a little search and I found this http://forum.xda-developers.com/showthread.php?t=519602
(you should try it too )
Put what in WinXP compatibility mode? The HTC? How. I never heard this was even an option.
Or do you mean the mobile device center? Why should I do that, it's a programm native to Win7 and it works with the older HTC, so normally it should with the never device, too.
And about your second link...well I already have Win7 (not the RC version) and the latest version of the windows mobile device center is already installed (came with the operating system). There is no windows update for that either, just checked.
I'll try to get my hands on a bluetooth-usb-stick, see if that connects properly. Unfortunately I don't own one...
I don't see any problem with my P3452 sync with Windows 7 Enterprise 64-bit Version. In fact it work instantly when I connect the USB cable to my laptop after I upgraded my laptop to Windows 7.
Did the cable connect properly? or the USB port on the phone itself?
How many pc the phone have sync to? I remember cannot be more than 2, but I might be wrong.
ahsiang888 said:
I don't see any problem with my P3452 sync with Windows 7 Enterprise 64-bit Version. In fact it work instantly when I connect the USB cable to my laptop after I upgraded my laptop to Windows 7.
Did the cable connect properly? or the USB port on the phone itself?
How many pc the phone have sync to? I remember cannot be more than 2, but I might be wrong.
Click to expand...
Click to collapse
It's only one PC and I think the cable connects properly, because the phone is getting charged when I attach the cable. On the other hand there is no Windows sound indicating a USB-device has been connected and the device doesn't show up in the workstation.
So it might be the USB connector which is broken (the cable worked without any problem on my older HTC so it should be okay). As the device is already a few years old I don't have any guarantee left.
On the weekend I will try to connect it via bluetoot with my brothers notebook (don't have bluetooth on my pc). If that works I will get me a cheap bluetooth usb dongle...
Also check pins aren't bent inside on the phone?
captainstu72 said:
Also check pins aren't bent inside on the phone?
Click to expand...
Click to collapse
They look okay to me. Nicely in a row, none is bent.
After some little trouble setting it up, synchronizing via bluetooth worked today.
Thanks for all the answers.
Hi
Got a new galaxy tab and cannot get any joy out of usb connecvitiy.
On both Windows and Linux when I connect the device to a usb port I get no response whatsoever from the host operating system.
I have tried changing the usb settings under Settings|Wireless and network|USB Settings
I've also tried it with both USB Debugging enabled and disabled.
Nothing whatsoever... as if I did not even plug the device into the host OS.
Anyone else experiencing this issue?
Thanks
I had the same problemon one of my computers running windows 2003 but it worked fine on another with windows 7
Thanks for the reply - I get the same result on Windows XP, Windows 7 32bit and Linux
Took the device back today - seems USB is faulty.... waiting for replacement.