With my current ROM the screen locks when the phone is put into sleep mode. When I wake it up I have to slide a bar to unlock the screen.
What steps do I need to take to remove the screen autolock?
Mine doesn't do that with the current (stock) pure rom.
Did you leave out many details? Perhaps directed to a specific thread in the rom forum if you flashed a new rom?
thanks. got it fixed with a reg edit.
Related
The problem appeared today morning, while listening music using tcmp. the sound stopped suddenly, and standard animated cursor appeared over tcmp screen. i closed tcmp, and the rest of the system seemed fine, i was able to mute the phone and entered my work place. After a while i noticed the screen is off and i can not turn it on using pwr button, although green led kept blinking so the phone was operating. after a soft reset it would not go over splash screen showing IPL, SPL (which are: IPL: 1.06, SPL 1.06, GSM: 01.12.10, OS 1.6.2.4).
I've tried multiple times and still the same, only difference is that sometimes I can see the cursor and sometimes not. I can get to rgb screen and "press send to restore" as well, but that's it. I can't remember whether previously pressing a key illuminated a screen and keys, but now it doesn't. I used to have problems with screen not going black on idle since few days, but that's it. What could have happened? And if the only solution is hard reset, please tell me, could I somehow backup my contacts now? I don't have activesync here so I have to wait till I finish my work to find out..
please help anyone...
rom version : 1.6.2.4 WWE,
date : 11/15/05
radio : 01.12.10
protocol : 4.0.13.23
extrom : 1.6.2.105
That's spooky. My MDA has the same versions of IPL, SPL, GSM and OS, and this morning started misbehaving.
What's this rgb screen you can get to with the "press send to restore" option?
How do I do a hard reset (I have a backup on SD) without being able to get to the Start>Settings>System>Clear storage control panel option?
Rgb screen is a bootloader which i enter by holding cam+voicedial+commmanager butons while softreseting wizard. the other screen i mentioned i enter holding cam and voice buttons, and then pres reset. that screen says 'pres send to restore factory defaults any other key to quit' and it does hard reset if you press green button here...
my problem seems to be over for now, i managed to turn the phone on while i plugged it into a wall charger (believe me, the battery was not a problem - i don't know for how long it's ok now, but at least i made contacts backup now so that i'm ok with a hard reste if i have to...
You both have old roms and could do with upgrading them to aku2 roms. (your device will be more stable) i.e. the first number of the rom will be 2. Please dont ask me to go through how to flash a rom because there are hundreds of posts on the same topic and read the wiki - shortcut top left of the screen. You need to identify whether your device is g3 or g4 but i suspect you both have g3 chips.
Now read & read esp the wizard upgrading forum and wiki and then when you feel confident - flash your device.
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
banannq said:
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
Click to expand...
Click to collapse
Looking at your rom numbers i gather you have a t-mobile vario - is it uk or usa rom or polish - i see you live in poland.
there latest uk rom is here ftp://[email protected]/Wi...Prodigy_2210206_109_21911_TMO_UK_WWE_Ship.exe
us rom ftp://[email protected]/Wizard/Roms/Tmobile/RUU_Prodigy_2170702_217_20710_TMO_US.exe
user name xda password xda
Its prob best you sim unlock and cid unlock before you flash in case you change to a non-tmobile rom inc one of the cooked roms.
see here http://forum.xda-developers.com/showthread.php?t=249474
and read dr puttingham's tutorial http://forum.xda-developers.com/showthread.php?t=285435
and now i have given you more than enough hints
p.s. by the way remember to write down your gprs settings and mms settings to use with your new rom.
thats right, its tmobile vario, uk one. it is sim unlocked, i'm not sure about cid but it should not be a problem. thanks for the hints, it really seems more then enough;] i'll probably have to use theese, as soon i have a spare evening...
you don't have to explain me the importance of gprs settings - forcing my wiz to work in uk's o2, then in polish plusgsm, then loosing settings and doing it again finally got me into a habbit of backing every settings up ;]
and last but not least, guys, yesterday i did my first HR ;] ...
Hey guys,
I've got a really annoying problem with my backlight.
First it starts to "shut down" for a while, i thought it whas some kind of protection cause it was under direct sunlight for a while ... but now i flashed the new german rom, (RUU_BlackStone_HTC_GER_1.56.407.2_Radio_52.60.25.3 3_1.12.25.16DE_Ship) but i forgot to flash the right HSPL before so I'd some colour problems ... then I flashed everything in the right order and it works ... but after some minutes the backlight is turned to a minimum ... its on but nearly not visible ... same thing after a hardreset
pls help
No one an idea ? Should it be a hardware defekt ?!
Have you tried going to settings > Power > and then either Backlight or Advanced and delselect 'turn off backlight'
yes i tried it out but nothing happens ... i read that this problem appears on the diamond and that its a bug in the htc rom after flashing .... could it be the same ?
NightFire123 said:
yes i tried it out but nothing happens ... i read that this problem appears on the diamond and that its a bug in the htc rom after flashing .... could it be the same ?
Click to expand...
Click to collapse
Possibly, but I haven't experienced it and I flash new roms every other day. You said you followed correct procedure i.e. everything in the right order and flashed a new rom. Which HSPL are you using and which rom? i.e. is it HSPL 1.56+ and a 1.56 based rom?
Is your screen darkening after some minutes straight after you have flashed new rom, or after installation of new software?
yea its the HSPL 1.56+ and a 1.56 based rom, some minutes after flashing its gone dark, no software installed. maybe I made a mistake, how can I see what HSPL version ?
I tried to install LUMOS but even this can't handle the problem ...
After installation of any new rom, the backlight turns off after a few seconds/mins. But this is generally down to the power settings as described above. For your screen to still turn off automatically afterwards leads me to believe there is something else turning off backlight. Even when installing rom incorrectly back when I was a noob the screen didn't behave in this mannner. I'll rack my brain and get a cup of coffee and see if my memory comes back
I'm starting to go crazy....
I flashed serveral times other ROMs and finaly the stock SPL and my damn stock O2 Rom, I wonder why the backlight is the whole time down, even in SPL... now I decided to bring it back to the store... btw I hope they fix the little shadow on the right cornor of the screen, looking like cigarrete somke stuck in there and lay down on the top of the screen ... maybe some hardware blown up?!
Yesterday i was fliping my phone and slide it to send a message when my screen turns black.
Thinking it was going to sleep i press the power button but notthing happen, after this i close the keyboard and press one time the power button to turn off the screen and once more to turn it on and everything was fine again.
Now each time i try to open the keyboard the screen just turns black and what ever i do it just stays black, the screens just work in normal mode (portrait).
I think it should be a hardware problem, and now i must restore everything to factory setting to send to guarantee.
Now i need the stock rom from vodafone portugal and the stock spl, if someone can help me i'll be wonderfull.
Thanks in advance!
Bump
http://forum.xda-developers.com/showthread.php?t=497511
video #4, just use search in the future...
and here are all stock roms:
http://forum.xda-developers.com/showthread.php?t=475482
Sapa13 said:
http://forum.xda-developers.com/showthread.php?t=497511
video #4, just use search in the future...
and here are all stock roms:
http://forum.xda-developers.com/showthread.php?t=475482
Click to expand...
Click to collapse
Well maybe i dont explain very well what i want.
I know how to restore both firmware and spl, what i need is ROM X1i GENERIC_PT CDF1209-8334 Vodafone PT - and the respective SPL, maybe someone from Portugal could provide me with a backup from there X1.
hello, i have this rom on my hd2: Energy.Leo.21905.Sense2.5.Cookie.Jun.11 this is my firt cooked rom and i loved it, so far i had original 1.66 and i used there svmpowermgr and i had a shortcut for standby mode, there was everything ok becase after going to standby the device locked immediately, but now after pressing standby the hd2 needs 60 sec to lock itself (screen_off shortcut works ok, mean device is locking) how to make it work on actual rom? please help, regards
Hey guys, i need help with my phone. everytime flashing custom rom (arrow rom, crash rom) my brightness slide bar not function, i set to auto and still not change anything. and everytime i unlocked the phone from standby mode the screen won't turn on
any help would be awsome thank you
menkyy said:
Hey guys, i need help with my phone. everytime flashing custom rom (arrow rom, crash rom) my brightness slide bar not function, i set to auto and still not change anything. and everytime i unlocked the phone from standby mode the screen won't turn on
any help would be awsome thank you
Click to expand...
Click to collapse
Are you able to change the brightness from the Settings.
Do let me know so we can troubleshoot further.