Hi,
i have a problem with my XDA Comet / HTC atom since yesterday. I wanted to look at the clock but the display was just white. No reaction!
I tried to restart, tried to charge and removed the battery for some minutes but nothing worked. When I turn on the mobile, there only comes a white display.
What can I do now? Maybe I still got a guaranty, but I want to rescue the data (SMS, Contacts, ...)
When I try to connect the mobile to my pc the windows mobile device center starts but gives me the information, that the device is locked and I have to authorize. Usually I enter my 4-digits-code now on the mobile - but without a working display?!?
I tried to install "MyMobiler", but this is impossible because for this i need the windows mobile device manager.
Can anybody help me? I need those data!
Thank you!
Related
hi.
i have just upgraded and i have restarted the phone. and all i have is the blue windows mobile screen. its locked.
it has completed the upgrade process.
i have the battery meter in the corner, with the sound icon.
HELP PLEASE
how can i get around this.
the phone wont now sync to my pc.
any ideas guys
Hi guys,
This is my problem:
I have an Orange SPV 700. I have unlocked it few month ago and installed the Indigo Full ROM. Today in the morning i downloaded some stuff in my phone, and it started to work very slow (probably the memory was full). I have reset it and it didn't boot up.
When i start the phone i see the "by bepe" screen, then "smart mobility" screen and then the "windows mobile 6 professional" apears and nothing happend anymore.
I tried to install another rom but the Active Sync doesn't connect. When I conect the phone, the active sync tries to conect, but it doesn't succeed, but the network connection apears in control panel and i can even ping the device.
Can anybody help me reset/format/anything my device?
10x
Mihai
won't boot
mihaimoro said:
Hi guys,
This is my problem:
I have an Orange SPV 700. I have unlocked it few month ago and installed the Indigo Full ROM. Today in the morning i downloaded some stuff in my phone, and it started to work very slow (probably the memory was full). I have reset it and it didn't boot up.
When i start the phone i see the "by bepe" screen, then "smart mobility" screen and then the "windows mobile 6 professional" apears and nothing happend anymore.
I tried to install another rom but the Active Sync doesn't connect. When I conect the phone, the active sync tries to conect, but it doesn't succeed, but the network connection apears in control panel and i can even ping the device.
Can anybody help me reset/format/anything my device?
10x
Mihai
Click to expand...
Click to collapse
Do a hard reset
how? if you mean to press the little button from the bottom, i've allready done that. Actually that's the only button that works. If I want to shut down the phone, i have to remove the battery.
10x
Mihai
no solution yet
I see that nobody gave me an answer...
May be you can help me this way:
Anyone know a way to access phone's memory without using activesync?
10x very much
Mihai
You should REALLY start reading before asking...
Go to this address:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
Have fun resetting that thing...
10x
10x
I didn't know what to search for
Mihai
HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
It used to work fine b4... but now it restarts itself after few hours, it just shows a blue imate screen, then goes blank, again the blue screen... it goes on and on. It only stops when i remove the battery. but when i put it back on it does the same thing again ...It only functions normally the moment i put it on charge, then i have to set up everything again... i.e the screen tapping thing and the cut and paste doctor's appointment thing
I flashed a new ROM on to it, it was fine for a few days but now its started again...
Any idea whats wrong wid it??
help anyone??
get a new battery
Gettin a new battery didn't help, it still restarts itself but only when I open certain applications... No specific application as such... At times its the camera, photo contacts, even messaging.... So really don't know what's wrong wid it..
Is there anythin I need to upgrade or sumthin??
Thanks...
BTW. I'm using Ather's WM 6.1 Diamond ROM, just flashed it few days back...
just got new 6.5 rom from the post and follow the below steps you got your working ppc again
happy flashing
1 - first fully charged battery.
2 - install mobile device center or active sync ( as per your OS )
3 - Enter in to the bootloader mode
4 - connect USB cable with ppc device.
5 - wait for detection of the device
6 - drivers are automatically installed if you are using windows7 it shows
driver installed successfully & device is ready to use.
7 - extract the rom update utility from the posts whichever you like ( remember choose it carefully as per your device )
8 - just double click on upgrade icon in extracted folder and yeah you done.
if still any problem persists then fell free to contact me on [email protected]
FYI: In My case it was the Battery. (Random restarts)