Related
i have a tmobile Wing running wm6 and i have tried all htc touch apps on this website and they dont work for me... can someone either upload working apps(like the contact manager, the comm. manager, the cube thing) or upload a working ROM of the HTC touch(which will work on the WING) for the 64 bit computer??
how are you installing them?
you realise you put the cab file onto the phone then execute it there rather than your pc right?
thats the impression i get from your post...
yes i know that, i am not a nub... i have installed many apps, but they end up screwing up my phone cause it works so slowly
bump ...
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
well, i transfer it to my storage card, and then run it. later i get a successfully installed message. i soft-reset my phone and then either the program doesn't start up, puts my phhone in a infinate reset mode, or doesnt work correctly.
the htc cube is installed, but i can see the cube! i see this S icon, and a P icon when i slide my finger from bottom to up . since it didnt work, i unistalled it.
the contact manager from the all htc apps extracted sticky starts up, but i cannot change the theme! i see the regular old contacts manager with a white bar, when i run my finger over it, it shows a letter, and scrolls to it, but doesnt have the touch interface i need, and its not graphical at all
and the comm. manager REMOVES my comm. manager, rather than adding one
i am running wm6, boots fine now, the following htc apps
-audio manager
-htc touch theme
-htc album
-htc touch skin for wmp
-spb backup
-htc touch wait cursor(got from freewarepocketpc.net)
that should explain a lot
mr_ding said:
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
Click to expand...
Click to collapse
explode? can you please post some links and i will try them and replay asap
The 'htc cube' your talkin about is not the actual cube. its called FTouchFlo and is used to scroll and launch programs by using gestures. the changing between s and p is changing between launching mode and scrolling mode. What your looking for is the TouchFlo cube, which i belive must be cooked into a rom to work well. there are other options out there that can be cab installed, just search around the forums.
u mean something like this?
http://forum.xda-developers.com/showthread.php?t=343583
i tried that but in the instructions, i dont know what the prequisites are n i dont have em
i copied the shortcuts to the startup folder and then i ran the program in the folder containting the exe file that came with the zip
can someone post a cab, that i run, and will configure my phone that it works... i dont want to do the "remove the following apps from the startup folder...", the cab file should do that...
i also have problem with touchflo. i saw a lot of threads on it and i dun know which 1 i have to follow and install.
and if any expert here can help me.
1. i am on wm6. not htc theme.
2. i am on wisbar and wisbar desktop
3. device is atom life.
and i want to use the touchflo. can anyone assist me?
can i do the swiping even my screen is on the wisbar?
can anyone help me with this.
help is greatly appreciated.
thanks!
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
killeredge said:
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
Click to expand...
Click to collapse
yes. i want also.
bump? ...
bump ??
come on ppl, i am sure that someone has gotten touchflo to work
Does anyone know how i can remove the touch it blackstone dialer as it is a bit laggy for me? When i try windows tells me it cannot be completely removed.
AFAIK only hardreset will help. Did it twice, now I know how to re-setup my device in few moments. Also I keep all CABs I use on card.
One of the reasons I don't use TF3D anymore is it has tons (1600) files in windows folder which slows down a lot of things. I just don't this kind of mess on my device (WM alone are enough mess).
Dr.Sid said:
AFAIK only hardreset will help. Did it twice, now I know how to re-setup my device in few moments. Also I keep all CABs I use on card.
One of the reasons I don't use TF3D anymore is it has tons (1600) files in windows folder which slows down a lot of things. I just don't this kind of mess on my device (WM alone are enough mess).
Click to expand...
Click to collapse
You are talking about different things here, the dialer does not mean TF3D.
I deinstalled the Blackstone Dialer via Activesync, but I never tried it from inside the phone so I can't tell if there were problems with deinstalling.
Just reinstall the original Xperia Dialpad (dialer)
The cab is here
cab provided deletes HTC's "incoming call" menu previously installed!
The cab installs the Xperia dialpad, that's true, but by completely removing the HTC GUI for incoming calls as well!
To accomplish this, I could also uninstall the HTC gui, I would not need your cab for that!
Is there any way to have both
1. the Xperia dialer
2. a graphical GUI for the incoming call (incl. photo etc.)
This seems surprisingly difficult!
There is an easy way...
... to have
1. a graphical incoming call window including caller photo id
2. the original dial/pin/... keypad of the Xperia
Just install S2U2 (slide2unlock) freeware, you can disable the locking feature and just use its caller id feature!
It works just well, and you can forget about all this additional HTCphone stuff (which of course you should uninstall this way...)!
dadeadman said:
Does anyone know how i can remove the touch it blackstone dialer as it is a bit laggy for me? When i try windows tells me it cannot be completely removed.
Click to expand...
Click to collapse
arpysystems said:
... to have
1. a graphical incoming call window including caller photo id
2. the original dial/pin/... keypad of the Xperia
Just install S2U2 (slide2unlock) freeware, you can disable the locking feature and just use its caller id feature!
It works just well, and you can forget about all this additional HTCphone stuff (which of course you should uninstall this way...)!
Click to expand...
Click to collapse
Not true. S2U2 is even more laggy than the HTC slide to answer thing.
I suggest sticking to the Blackstone dialer, it's the fastest I ever used.
The dial/pin/keypad is only a skin, performance will not improve if you have the Xperia dialer with slide to answer.
Hi!
Main problem with Windows mobile for me is that VoIP can't work with internal speaker.
Reading threats here I came to conclusion that it is the same problem as inability to record other side in phone conversation.
So, when I saw ICR (in call recorder), I saw a solution to that problem.
As I understood it is originally from HTC touch HD and it was successfully ported to HTC toch Pro and Diamond.
So I tried a few Pro and Diamond versions found on their forums. And, of course, every time I had to hard reset my device because of loss of phone dialer caused by different screen resolutions.
Only in one case I noticed some improvement in call recording, and I didn't manage to open ICR application at all.
Then I saw this two ROMs for Polaris:
http://forum.xda-developers.com/showthread.php?t=459826
http://forum.xda-developers.com/showthread.php?t=472351
They both have ICR implemented. In the first forum there was a cab posted. So I tried that cab.
I couldn't get "start record" in menu with or without established phone call so I used external recorder Vito audionotes touch.
I could record both sides of conversation but sound level was unequal. And I don't mean like two sides had different sound level (which they do because the other side was louder, like recording with bluetooth hands free, which is ok as long as I can hear both sides well), but complete sound level was changing.
VoIP worked different. I could hear a lot in internal speaker, but I had a feeling I hear the same from external speaker, just quietly. That's why I'm not sure from which speaker sound comes any more.
And ICR application just wouldn't start. When I press icon in programs nothing happens.
So, any solution for this problem is welcome.
If you have any idea how to make VoIP work on internal speaker or how to record both sides of conversation just answer to this threat.
It doesn't have to be a solution. Any idea may be good and maybe we can come to solution together.
You're also welcome to share any experience consdering this problem.
Thank you all in advance!
I have
HTC Touch Cruise
original WWE WM6.1 ROM
ROM version: 3.13.405.0 WWE
Radio version: 1.59.42.15
Protocol version:25.85.30.07W
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
wasabi55 said:
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
Click to expand...
Click to collapse
once you are in call you have to have the "start recording" foctional.
in Start -> Programs you can find the recorded files and options to where and in which format save the recorded files.
emrause said:
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
Click to expand...
Click to collapse
I was told by the autor of 3LIT3 V Rom that you need Iolite dialer for incall recorder to work.
I tried with opal dialer and it didn't work.
I tried this ICR with C_Shekar WM1.60.21014aCS with opal dialer and olso tried on an Elfin with Onyx 4.2 ROM with opal dialer, it WORKS in both devices with no problem. Hope this is usefull for you.
when you say it work do you mean you have start recordin menu when conversaton starts or you can open ICR program and change some settings?
Having start record would be nice, but only that is not crucial to me. Can you post a link to opal canvas whit which this ICR works.
Can somebody post a link to Iolite dialer whit which this ICR should work.
Is there a way to delete original dialer. Because in case I install one of these and decide to use it permanently I would have three dialers installed (one original windows, one original touch cruise, and the one I use).
Did anybody try Voip (fring, skype, SIP ...) with working ICR installed? Which speaker does sound come from?
What options are there in this ICR program?
Thank you all no your answers!
kulen said:
What options are there in this ICR program?
Click to expand...
Click to collapse
Only two: where to write the recordings (memory or storage card), and in what format (wav or amr). Both wav and amr are 8 kHz 16-bit mono, so quality is rather poor.
Hi, i'm using m-amine 2 with opal dialer.
I installed in call recorder cab founded here http://forum.xda-developers.com/showthread.php?p=3277318&highlight=recorder#post3277318
Now i can see "start recording" under menu during the conversation, but if i tap it nothing happens.
When i open icr under programs, no calls was recorded and i can't change the options (no selectable menu appear).
Which is the correct way to make icr fully working?
I installed opal phone canvas and in call recorder. These are results.
-I can't open ICR in programs. When I press on icon nothing happens.
-When having acitve conversation I do have start record in menu. And I can record conversation. Conversation is saved in My Documents/recording.
The other side can be heard but quietly.
-When using VoIP (fring) sound comes from external speaker. If I enable earpiece sound comes from both speakers, but louder from internal.
- !!!And one big problem. Phone doesn't ring neither vibrate.
I couldn't find Iolite dialer cab so if anybody has it please can you post it or provide link?
Any idea how to make this work with original ROM?
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
@chavobravo
Thank you very much for explanation.
Can I just install new cprog.exe?
Can I add AKU 1.4 to original ROM or is it neccessary to find ROM already having that build.
Do you know does this somehow affect problem having VoIP only on external speaker?
Or do you maybe have any solution for that?
BTW I flashed your 3LIT3 VI FULL ROM to try ICR. And ROM is really good. It seems faster than original. Only I like cube more (at least until I get used to manilla) because of beeing able to call it from any program.
It seems the only difference between your ROM and my original ROM with your in call recorder.cab is that in your rom I can open in call recorder program and there is start record in menu. But recording with Vito audio notes and VoIP (Fring) seems to act the same way.
For those (like I) who had no luck with the above registry recipe, or otherwise found that the other side is recorded inaudibly, here's a very simple app (sources included) I wrote for myself.
It runs in background and records all incoming and outgoing calls thru the ICR, and should work with any bios/acu/dialer/etc provided that the ICR cab mentioned in this thread is installed. The app itself requires no installation, and uses the ICR settings for the recoring format and dir.
No warranties etc etc, the app may contain as many bugs as possibly may happen to be found in 200 lines of code, please correct them and use the code at your pleasure, you've got the sources anyway. Hopefully somebody will write something more user-friendly based on it.
is this can useing on the SE X1?
To chavonbravo:
chavonbravo said:
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
Click to expand...
Click to collapse
Are these options suppossed to be in a Jade? After browsing with Regedit, I just can't find them:
[HKEY_LOCAL_MACHINE\System\AudioRecording]
AudioRecording does not exist...
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
Voice does not exist...
Do I have to create them?
Thanks!
How to set icr to auto record any call ?
Tanks
I love incall recorder, I wish everyone would put it in their roms once this is worked out.
It is just too convient of a feature. Some of us have to do work on the cell phones, and it is just to dang convient to hit this and keep going.
I am wanting to upgrade to 6.5, but i want this feature. And just looking at 6.5 now. Wil this work in 6.5? Can i use the link above to get the cab, and then do i need a specific dialer for it?
Default InCall Recorder and 2-Way Record Patch
See this Link
And for the cab file the correct link is here
whats in this rom:
This rom has Footprints but the tab is disabled in Manila... use Manila2D customizer in tools folder to enable it.
There are some minor cosmetic problems because the new apps are original for WVGA but nothing big.
I'm working on getting some more of the apps ported
This rom also has a new way for customizing the rom so it's not UC
Button 4 abow volumeslider
longpress is maped to AltTab to switch between opend apps
longpress is mapped to CloseAll well yes it closes all opend apps
Free ram after fresh reset
Storage 108 MB
Program 47 MB
CE OS 5.2.21028(build 21032.1.6.0)
Stuff from Rhodium:
Enlargen Startmenu
Menu Enchangement
Notification Enchangment
Taskmanager
TouchFLO settings
WIFIsettings
WLANsettings
Comm Manager
medihub
Dshow
lockstream
And lots of the apps in settings
Manila2D from Iolite
Audio Manager (only from Manila music tab)
Camera 6.8 Raphael
Phonecanvas (Opal only 2g)
ThumbCal
Large titlebar
Voliume control
Opal Keyboard Tanks to DupinBJK get more languages here
File Explore with extensions
Connections:
ActiveSync
Google Maps
GPS Tools
Internet Sharing
Quick GPS
Games:
Bubble Breaker
Solitaire
Internet:
IE
Messenger (msn)
Opera Mobile
Windows live
Multimedia
Album (upload to YouTube and Facebook)
Audio Booster
FM Radio
Footprinta
Java
MusicID
Windows media player
Youtube
Office
Calculator from Rhodium
Excel
Notes
Tasks
Word
Tools:
Advanced Task Manager
Manila 2D Customizer Get newst update here
PIM Backup
Pocker rar
Other stuff:
BTFtp
BTSAP
Clear type Tuner
Softkey changer
Account Manager
Uploader
Advanced Network manager
and probable some more
This ROM can be dumped and recooked. Unlike many of the cooks, no RGU have been deleted. No DSM has been deleted. And most of all, the ROM has not been crippled against dumping by deleting IMGFS signatures. So feel free to dump and modify upto your taste. And share the knowledge with the community. We can improve more by sharing the knowledge than keeping it secret.
Download Link
Special Thanks to
hma4 - APBilbo - Cloudyfa - maxniper - itje - Laurentius26 - P1Tater - anja31 - pinobigbird - wmn79 - Duttyroy - dsixda - udk - Noonski
all the DEV's that have made it possible to dump,port and cook roms with their unbelivable tools
Extra special thanks to bepe for putting together some of the best tool around XDA into the DEV kitchen that I use for several devices"
reserved for more
just take one more
hi
thank you men
i like this rom
Very thank you.
In Download!
Which Radio you suggest to use, new 1.59.xx.xx or series 1.58.xx.xx
rspillo said:
Very thank you.
In Download!
Which Radio you suggest to use, new 1.59.xx.xx or series 1.58.xx.xx
Click to expand...
Click to collapse
I've only used 1.59.44.02 with this rom I have a diamond as main phone so I nolonger use my Cruise.
Ok, thank you for rapid reply. The 1.59.44.02 is, for me, the best radio for Polaris
screenshots please ?
I've just used this ROM with 1.65.30.09 radio version.
Phone and internet work fine, but i can't receive file via bluetooth. Most probably it's because of radio version.
I must say, this ROM slower than 3lit3's or c_sheckar's. Scrolling in Manilla tabs is not so smooth as in above-listed roms.
Also I don't know how can I close edge-session, 'cause this notification pop-up don't allow me do that!
I really like new camera, i mean programm =)
So, in conclusion i'd like to say that i'm not impressed by this rom =\
+1 please..!
naxos said:
screenshots please ?
Click to expand...
Click to collapse
Hi .. Great Job!!
ROM looks nice and it´s working smoothly. Please, a request: could you add InCall Recording to this ROM?
Thank you
Dear Gullum,
First, Cruise mobile worth nothing without your Rom.
Secondly, there are some bugs i want to inform. hope that your Rom become the best ever.
1. the songs tab in manila doesn't work at all. it stuck on searching thing.
2. when you try to change phone call ring from notification sounds, it force you to get back to the default ring.
3. when you try to reply msg from the message inbox, some times a msg box said the msg haven't sent.
4. its not possible to touch the battery or volume on the screen.
Could you plz tell us how to solve those bugs.
thanks in advance.
smoken said:
Dear Gullum,
First, Cruise mobile worth nothing without your Rom.
Secondly, there are some bugs i want to inform. hope that your Rom become the best ever.
1. the songs tab in manila doesn't work at all. it stuck on searching thing.
2. when you try to change phone call ring from notification sounds, it force you to get back to the default ring.
3. when you try to reply msg from the message inbox, some times a msg box said the msg haven't sent.
4. its not possible to touch the battery or volume on the screen.
Could you plz tell us how to solve those bugs.
thanks in advance.
Click to expand...
Click to collapse
I can +1 for the ringtone problem. Might have something to do with the filename - there is a space between the name of the default ringtone and the extension?
The only way I could fix mine was to convert the ringtone I wanted to use to wma from mp3 then rename it to the default ringtone name. Copied it into the /windows folder with Total Commander and all fine.
Also, couldn't get QuickGPS to work. Same problem as with the udK ROM I think - gets to 76% then reports connection error.
Otherwise, very nice ROM gullum. I especially like the Rhodium stuff. Other cooks are giving us the same apps but with newer sys/xip which often doesn't really make a whole lot of difference. Thanks.
Hi Gullum!
your rom is very very good and cleanly.
I'd like modify some things in this rom.
Please share your kitchen if not secret.
Thanks.
Dear cr1960,
that's right, i checked the ringtone & found that there is a space between the ringtone name & it's extention. unfortionatlly, i corrected that but still have the same problem.
i also checked the other ringtones, they all correct.
what should i do?
smoken said:
Dear cr1960,
that's right, i checked the ringtone & found that there is a space between the ringtone name & it's extention. unfortionatlly, i corrected that but still have the same problem.
i also checked the other ringtones, they all correct.
what should i do?
Click to expand...
Click to collapse
The only way I could fix mine was to convert the ringtone I wanted to use to wma (from mp3) then rename it to the default ringtone name. Copied it into the /windows folder with Total Commander (replacing the default ringtone) and all fine.
Good luck!
its really hard to post any sreenshots?
"Invalid file" error on MediaFire, can't download((
jiles said:
"Invalid file" error on MediaFire, can't download((
Click to expand...
Click to collapse
Then download from RapidShare...
Hmmm..... just realised the post with the link isn't here anymore, maybe something to do with the site going down a few days ago? Oh well, here's the rapidshare link:
RAPIDSHARE
Yah, there was a crash and a backub a day or two ago. Thanks for link.
Hey i have nfsfans 6.5 v13 rom. the problem is my ringtone will not play when someone calls. it will play if i get a text or something else. my ringtone is the only thing that doesnt play. if i set it on ring and vibrate, it wil only vibrate. i have tried reflashing but the problem appeared after a week or so. with both times, i installed nitrogen, the ppc battery andperformance registry tweak, nodata, and mortscript. please help me. thanks