Related
Hi there,
I'm pretty experienced with rom cooking, but need a bit of direction from the pros here in a project I'm working on.
I have a working WM6 rom that I'm looking to make a kitchen for in order to more efficiently customize the rom.
I've decoded the rom to nba/fat format (my device uses nba/nbf format) and dumped the imgfs to a dump folder without any issues and can edit the rom that way, but I'm looking to make a kitchen.
I've used bepe's package tool to convert my dump into OEM & SYS folders without any problems. I now just need to be pointed in the right direction on how to rebuild these packages back into a working nba/fat file.
I've tried putting the OS & SYS directories in an existing kitchen like the bepe/helmi/scoter kitchens and using the imgfs tools there building the packages back into a rom. The rom builds successfully but then won't boot past the initial splash screen after flashing it.
Is there something else I need to do? Is it possible Bepe's package tool isn't properly building the packages?
Any help is appreciated. Thanks for everything each of you does to help the community
anyone?
I'm no expert, but everytime I've tried to dump a rom then rebuild it and flash it, it freezes at the 2nd splash screen. I never could get it to work, then I read somewhere that if the RGU files are missing then it would fail to boot, and sure enough on every rom I tried to dump, the RGUs were gone
My advice would be to build your rom with an existing kitchen. Collect all the packages you can find, build the ones you can't. Save all your custom graphics, themes, sounds, ringtones. Export all the registry keys for the programs you have on your phone now and use them to tweak your packages. It really won't take you much longer than if you were able to use the one you dumped. Before you know it, the kitchen you put together will be so much better than the ROM you dumped that you'll forget all about it!
My kitchen is a work in progress, but right now it's SO close to the way I want it that I can do Hard Resets without a thought as the only thing that needs to be done afterwards is restore my contacts!
All my connection settings are there, all of the buttons are set the way I like, all the colors, graphics, themes...everything! I've even set up an extrended rom with custom cabs I put together with all my commerical software with the Registration keys built-in.
I can't recommend a kitchen since I haven't used them all, but I started with Octaivio's with a 1437 build rom, now I've replaced that base rom with the 1908 build one from his latest kitchen and it's worked fine. The reason I used Octaivio is because he used Pbar as a taskmanager instead of that awful useless HTC x button (remnants of it still pop up when switching from portrait to landscape and vice versa).
joemanb said:
I'm no expert, but everytime I've tried to dump a rom then rebuild it and flash it, it freezes at the 2nd splash screen. I never could get it to work, then I read somewhere that if the RGU files are missing then it would fail to boot, and sure enough on every rom I tried to dump, the RGUs were gone
Click to expand...
Click to collapse
I can easily dump a rom, change it, rebuild it and use it successfully. That's not my issue. And, by the way, you were given misinformation about the rgu's. The rgu files are supplementary registry files that are merged into the main hives for each specific package, to make the registry entries modular. Even if you were to delete some rgu files, your device would still boot but wouldn't have the desired behavior for the packages you installed as some registry entries would be missing
My advice would be to build your rom with an existing kitchen. Collect all the packages you can find, build the ones you can't. Save all your custom graphics, themes, sounds, ringtones.
Click to expand...
Click to collapse
There are still a number of devices where no kitchen exists--mine is one of them, and honestly I'm not looking to use someone else's--I'd prefer to make my own
I just need someone to tell me what needs to be done to convert the OEM & SYS directories generated by bepe's package tool back to a working rom.
Steps I'm attempting now:
1) Dump original rom to dump folder
2) Run Bepe's package tool to make SYS & OEM folders.
3) Add modules
4) Run G'Reloc to fix overlapping modules.
5) I run BuildOS which makes the dump in the temp folder from the SYS & OEM folders.
6) I copy the original rom's fat(nba) to a temp folder
7) I dump imgfs from fat(nba) to imgfs bin file in temp folder with prepare_imgfs.exe
8) I merge the dump back into imgfs bin file with buildimgfs.exe
9) I put imgfs back into the fat(nba) with make_imgfs.exe
10) I convert nba back to nbf to flash
11) I flash the rom successfully.
12) Doesn't get past splash screen
Can anyone tell me what I'm missing or what could be making this non-bootable?
Thanks.
So its not the RGUs..
Please, if you figure this out, post the solution. When I ran into this, I searched all over the forum for a solution and found at least 2 or 3 other posts with this problem, but never a response.
Good Luck
have you modified the Iniflashfile.txt? thats the step most leave out and then it wont boot past the second splash screen
austinsnyc said:
have you modified the Iniflashfile.txt? thats the step most leave out and then it wont boot past the second splash screen
Click to expand...
Click to collapse
No, at this point I'm not trying to change the initflash so I haven't modified it. I know that when the time comes to change it I'll need to do the hex edit thing for the first 2 bytes, the unicode and the last line empty,. etc.
Also I'm not even getting to the 2nd splash. I'm not getting off the initial splash screen.
I'm thinking at this point the imgfs isn't getting put back together properly.
There have got to be some old pros who can tell me what I'm doing wrong.
I think I found part of the problem. In step 5, CreateOS.exe is doing something wrong with the hives. After running it, default.hv which is 770K+ in sys/metadata goes down to like 42K.
Anyone know why this is happening?
source said:
I can easily dump a rom, change it, rebuild it and use it successfully. That's not my issue. And, by the way, you were given misinformation about the rgu's. The rgu files are supplementary registry files that are merged into the main hives for each specific package, to make the registry entries modular. Even if you were to delete some rgu files, your device would still boot but wouldn't have the desired behavior for the packages you installed as some registry entries would be missing
There are still a number of devices where no kitchen exists--mine is one of them, and honestly I'm not looking to use someone else's--I'd prefer to make my own
I just need someone to tell me what needs to be done to convert the OEM & SYS directories generated by bepe's package tool back to a working rom.
Steps I'm attempting now:
1) Dump original rom to dump folder
2) Run Bepe's package tool to make SYS & OEM folders.
3) Add modules
4) Run G'Reloc to fix overlapping modules.
5) I run BuildOS which makes the dump in the temp folder from the SYS & OEM folders.
Click to expand...
Click to collapse
At this point I think that you have the XIP extracted already, in order to create valid boot.rgu
6) I copy the original rom's fat(nba) to a temp folder
7) I dump imgfs from fat(nba) to imgfs bin file in temp folder with prepare_imgfs.exe
8) I merge the dump back into imgfs bin file with buildimgfs.exe
9) I put imgfs back into the fat(nba) with make_imgfs.exe
10) I convert nba back to nbf to flash
11) I flash the rom successfully.
12) Doesn't get past splash screen
Can anyone tell me what I'm missing or what could be making this non-bootable?
Thanks.
Click to expand...
Click to collapse
It's a suggestion, but i think you're missing the .rgu files.
Of course, those are not needed when flashing, but when BuildOS creates the default.hv and user.hv...these 2 being invalid, the OS can't boot.
Probably Bepe can clear you better on that one.
Cheers !
source said:
And, by the way, you were given misinformation about the rgu's.
Click to expand...
Click to collapse
Apparently not, after reading Anichillus' response (which agreed with mine) I converted the HVs to RGUs and it WORKS finally!
It's probably not a good idea to reject info out of hand like that..You almost had me convinced. Thankfully I always try to verify information before I accept it, or tell someone they're wrong, mistaken, or misinformed.
Thanks Anichillus!
Hello everyone, put my old kitchen, a little 'restored.
IMPORTANT: To build a good rom, you 1st have to dump an original rom for your preferred device, to have all files needed to build it after (header.xml, splash.xml ecc...)
List of Features:
Check rom version for exchange for new payloads (tested on hd2 rom 3.14 and it worked!), some minor adjustments, the editor, RGU, app.ref etc ..., now always starts as an administrator.
to test it, dump an original rom and then have fun customizing!
New style, new tricks at runtime, new tools for dumping and building !!!!! (Libnb.dll!)
Fixed bugs on inclusion radio.nb and splash.nb !!!!!
Import into .\ext, old-style packages, OEMpack, EXTPack (and also from Cab files
in the context menu is also remodule package (from files to module!) and re-file package (from modules to files!); other bugs solved!
Rapi connection problem solved with device in activesync and remove ring tones, images by default!:
Feature on delete files (ringtones, images (wallpapers) and other images (avatars) from a folder in oem \ langdevice \ .....)
Features to all feedback packages, from kitchen and easily editable text file (packages_usefull_infos.txt) in the root of the kitchen.
Can also import "rebuild dumped roms", from DFT dumped, OSkitchen kitchens and RAW Dumped roms!
Support to run the cabs charged by hands at 1st boot after flash!
Save & restore all tweaks in all the tabs when save/load a rom!
Added info exchange Rom language and Rom on the first use of header.xml libnb.dll nbh file to create!
Added new feature to force the run provxmls in Rom
Now when a dump .NBH, the new build is imported, in your EVK in use!
.\TOOLS folder
Inside the folder .\tools, you will find a new folder: registry_tweaks. The .\registry_tweaks folder includes some sample files. Replace and/or add .REG and .PROVXML files, name the files properly and the .REG files will be added as registry entries, the .PROVXML will be renamed as ****. ZZZZ_ provxml, as files are added. provxml, precisely in the rom and run when you first start to customize the rom as you like
The kitche includes two context menus for adding new .REG or .PROVXML files, edit them or delete if unused one!
Also includes new versions of DSM_editor and implantxip (no fake virus info about, someone in previous version, not me, inserted automatic "admin execution" with a kind of utility, into my implantxip.exe!, and maybe that "trick", was detect as fake virus, now, with my original updated version of implantxip.exe, my kaspersky doesn't find anything!!!!!)
Note
DSM_editor and implantxip (no fake virus info about, someone in previous version, not me, inserted automatic "admin execution" with a kind of utility, into my implnatxip.exe!, and maybe that "trick", was detect as fake virus, now, with my original updated version of implantxip.exe, my kaspersky doesn't find anything!!!!!)
System Requirements.
.NET FRAMEWORK 4.0 to execute new version of visualkitchen and new tools inside (dsm_editor and implantxip!)
Version History
12.2.9: compatible with x64 system machines, was libnb.dll,not was dll, was my exe, only I had to force x86 execution, also on x64 machines, that version was only for x86 machine, now at runtime, it is recreated, if is x64, compatible version is putted into .\tools folder, else a x86 compatible version will be copyed into .\tools folder!!!
12.3.7: package creator added as optiona choice when wanna import a cab into packages!
12.3.7: Added option to turn tricks "reg" to be placed in rom that will be in a good provxml 'forced to be the last to be executed, overriding any settings from other taxes proxml !!!!!
12.3.7: when forced execution provxml, reg cab, the sequence is .PROVXML in Rom, .PROVXML uploaded by you, proxml derived from the reg trick and finally the cabs
12.3.7: added possibility to add and execute a .tsk file into ROM!!!
12.3.9: bug solved on provxml creation when found "delete regkey" or "delete regvalues"
12.4.3: bug solved on save and load roms, new icon for exe!
12.4.3: "reloaded" update pagepool options on new implantxip.exe
12.4.4: solved problems with implantxip value as default
12.4.5: inserted possibility to load, edit and delete mortscript scripts into rom to run (config.txt will be populated with selected scripts) at 1st boot!
12.4.8: when you choice a bmp to became a splash screen, the kitchen automatically check if the format and size is good, if not, automatically modifyes the image, makeing before a backup of it, and adjusts it according to the file "splash.xml"
(I suggest to redump an original rom for your device, becouse there are a lot of libnb.dll, and I've changed in times, so maybe splash.xml, could be different in format!)
12.5.0: updated package_creator, see and edit into \tools folder user_folders.txt to add your own modded folders into start menu for lnk files extracted by cab files; now, all manila-language files will be stored automatically into relative 04XX subfolders, so only real lang-manila files needed will be stored into rom, and before build, cfc_gui.exe will be executed to compress and patch manila, if you want, only have to click on "tools<>patch manila", on cfc_gui.....
see U!
12.5.2: new built of implantxip, and some little little improvements on erviuskitchen.exe!
12.5.3: Added Visual advices for packages that have to be recmode or reversemode!
12.5.6: re-file or re-module packages that you insert into comments like "remodule, or re-file! (only id relative poackage is enabled while build rom!)
solved little bug on packages colouring (same color on "false/true" packages (enabled/disabled!))
12.5.8: solved some trubbles with LZX Compression!
12.6.0: more compatibility with new xipporterex to change rom version on nk.exe into 3.14 TMOUS ROMS! and now recontruct better alla lang files/folders for manila!!!!
12.6.2: Full compatibility with all Language codecs to recontruct well all lang files/folders for manila, and also all MUIS files will be stored in relative language SubFolders!!!
12.6.3: only exe, now remove also all *.cpr files with resolution different thankn used by your device, and store all of them into :\moved\cpr_moved\namepackage\resolution\...
Download Link
http://www.4shared.com/file/0Nv3ETFr/VisualKitchen_12_5_8.html
Updated only exe! (12.6.3_rev2)
http://www.4shared.com/file/9yFFf6YA/erviuskitchen_12_6_3_only_exe_.html
Quick Thread Link
Discussion on Latest kitchen start here: http://forum.xda-developers.com/showpost.php?p=9500214&postcount=2484
Reserved for future expansion
OLD visual multilang/multidevice/multibuild kitchen for last bepe rom-tools!! V1.8.2
Hi, this is a visual multilang kitchen based on last bepe's tools to build a rom.
Last Version: 1.8.1 aka 10.8.1 (1.8.1)
Date: 28.07.2009
Download Links: 1.8.1, 1.8.2
new_visualkitchen_v_1_8_1_only_exe_+_Tools_folder.rar 7MB
erviuskitchen_1_8_2_fixed.rar 523 KB
Latest version of Ervius Visual Kitchen tools. New visualkitchen with all dsm/rgu recreations/updater to have complete old_style roms ready to use .pkg updater!!!!! The KITCHEN has been updated to include logging; (see build_log.txt into root of kitchen after built a rom!!!)
Note: Also attached to this post as <filename>.RAR.ZIP. After download, remove (.ZIP) before UnRAR'ing.
Changes In This Release:
XIPPORTEREX:
Added compatibility with new 2.09 kn.exe to r/w correctly date/version on ROM!
Added capability to find version/release_date on new wm 6.5 nk.exe!!!
DUMP Process:
Now if dump a stocked rom, in EXT packages it leave relative dsm/rgu, create a global packages.ini (with all dsms infos inside!) and for each EXT Package, create "package.ini" file, with all infos about relative dsm,
All shadows, depepndencies, certificate needed in .\tools folder, it populate "dependencies" and "certificates" folder with all dsms and certs files found during dump process, used to insert/edit all dsms into rom with dsm_editor
OTHER button:
Provides for selection of ULDR reduction, PagePool sizing, disable Certificate
Verification, etc. Settings are stored in: ERVIUSKITCHEN.INI.
Editor:
Addresses issues when using "editor".
Compilation:
Solved bug on 6.5 reak aku roms
Addresses issues when searching structures and duplicate files during compilation.
Added possibility to change max number of modules in an hybrid ROM (nk.exe from 6.1 kernel and XIP From 6.5 kernel) the value is saved on that rom configuration, so every rom loaded has his max-modules value setted
Extraction:
Addresses issues when extracting contents of some device .NBH/.NB files.
Compatibility:
Addresses unsupported Language code (ex: 040C).
Added compatibility with old style rom (IMGFS & XIP).
All modules can be reallocked.
DSM processing; all dsm and rgu are updated/created -only with old_style roms creation! (required for cab.pkg updater support.)
In old style ROM mode; all is executed automatically, XIP porting is automated:***
- Correct realtive device's .VM must be copied to .\OEM\<devicename>\.VM
- Correct XIP.BIN must be copied to .\ROM\SHARED\<buildnum>\
Post-Download Instructions:
Extract the contents of kitchen archive to the root of your hard drive (ex: C:\XDA) to avoid path length errors.
Backup existing kitchen files. Files/Folders to backup are:
- Files in root of kitchen (ex: C:\XDA\My_Visual_Kitchen)
- .\TOOLS folder
Remove (delete) ERVIUSPACKAGES from TOOLS folder (ex: C:\XDA\My_Visual_Kitchen\TOOLS\ERVIUSPACKAGES).
Copy the contents of the extracted archive to the kitchen (ex: C:\XDA\My_Visual_Kitchen\) folder.
----------------------------------------------------------------------------------------------------------------------------------
Implantxip.exe (Pagepool Patcher/changer!)
Download Link: implantxip.rar 166 KB
implanxip can works with:
all kind of payload file, and more:
if a payload has ULDR removed (ULDR part not present!), it can work on it and reallign well some bytes into MBR
you can also remove completelly the uldr section (you could save some more space into payload in this way! (be attenction: in some payloads this operation causes non-booting roms!!! make a backkup of original
payload before use: "-uldr tryremove parameter!!!)
for help about: in prompt command write: implantxip /h )
Note: Also attached to this post as <filename>.ZIP.
----------------------------------------------------------------------------------------------------------------------------------
EXT Packages Rebuilder
To build EXT_Packages from old style ones; use the tool at your own risk!!! Fixed lost modules into new package created, now all modules are into .\files subfolder after ext package is built.
Download Links:
EXT_PAckages_rebuilder+Structurer_all_lang_enabled_v3.zip 8 KB
EXT_PAckages_rebuilder_modules_fixed.rar 9KB
Note: Also attached to this post as <filename>.ZIP.
Excellent work as always ervius.
Grazie mille.
^.^
That might come in handy for some ppl.
For my part, I'm used to command line as my primary WS is linux based. As a matter of fact, i prefer it.
@Ervius: Do you have any experience in coding for unix/linux?
At some point, pof coded a htc-flasher kitchen, but it was mostly wrappers for the windows programs.
Most of the tools we use for ROM building have their source code available, so...
Anyways, I'm off.
A.
GREAT!!
I'm testing it in my kitchen just today. I'm looks fantastic. Thanks!!.
If now you can integrate your XIP porting tool then.....
Regards,
elparra72 said:
I'm testing it in my kitchen just today. I'm looks fantastic. Thanks!!.
If now you can integrate your XIP porting tool then.....
Regards,
Click to expand...
Click to collapse
this is a alpha version, and stucks on platformrebuilder.exe execution, , but when I have some time more maybe insert all inside, xipporterex and other tools of mine!
can you post it on rapidshare please, megaupload is a menace. thanks.
In any case this is a great work!!.
I've been checking folders structure and adapte it to Spanish (or another language) is really easy. I'm preparing a new ROM, but as soon as I post it in a Spanish site, I'm going to 'play' with this application and l'll inform you about troubles. Thanks !!
On the other hand (I know this is not the best post to speak about), Your active sync killer is not working fine in 2.xx ROMs. Are you preparing a new one? Do you have a solution?. Thank a lot in advance.
Kind regards!!!
El Parra72
elparra72 said:
In any case this is a great work!!.
I've been checking folders structure and adapte it to Spanish (or another language) is really easy. I'm preparing a new ROM, but as soon as I post it in a Spanish site, I'm going to 'play' with this application and l'll inform you about troubles. Thanks !!
On the other hand (I know this is not the best post to speak about), Your active sync killer is not working fine in 2.xx ROMs. Are you preparing a new one? Do you have a solution?. Thank a lot in advance.
Kind regards!!!
El Parra72
Click to expand...
Click to collapse
you can adapt, but add other languages, near 0409\ and 0410 folders you can add 04xx\ or o8xx\ all you want, the kitchen at start recognizes how many into, and show all into combobox, you only have to choice in witch language want build the rom
for activesync killer, what you refer to, mine or the original by eliasweb???
bye!
I've detected this trouble in both. I've test them in several ROMS based on 'oficial' v.2.xx. I'm going to look for your post and follow this trouble there. Thanks.
..................
this looks better and better. I dearly hope that it will come with some kind of manual.. anything... just to know what to press and which button does what...
Thanks!
mjaxa said:
this looks better and better. I dearly hope that it will come with some kind of manual.. anything... just to know what to press and which button does what...
Thanks!
Click to expand...
Click to collapse
visual kitchen version beta1 released at 1st post, and see all ROM\ structures.....
Hi ervius, thanks for your tool.
I was trying beta1.
I have a couple of questions:
i've tried to import a package (generated with package creator) , I browse to the folder containing it, but after the right-click-> import package, it doesn't appear in the list of the applications.
I see it has been copied to the EXT folder but nothing more.
Also importing a package resets all the choices I made on what packages to include/exclude
If you need more details just ask
Thanks
A.
very nice, I will test this this week, and see if i notice anything. once again thank you
andreapappy said:
Hi ervius, thanks for your tool.
I was trying beta1.
I have a couple of questions:
i've tried to import a package (generated with package creator) , I browse to the folder containing it, but after the right-click-> import package, it doesn't appear in the list of the applications.
I see it has been copied to the EXT folder but nothing more.
Also importing a package resets all the choices I made on what packages to include/exclude
If you need more details just ask
Thanks
A.
Click to expand...
Click to collapse
well, well, so, some bugs are detected...
continue ti test it
Hi
I dump a rom (use:1s streps of Surface Kitchen v1.01), now i have "sys", "oem", and "rom" folders. Were i put this folders in your kitchen?
first steps!!!
ruipgouveia said:
Hi
I dump a rom (use:1s streps of Surface Kitchen v1.01), now i have "sys", "oem", and "rom" folders. Were i put this folders in your kitchen?
first steps!!!
Click to expand...
Click to collapse
Check the screenshots. You'll see the directory structure there.
ruipgouveia said:
Hi
I dump a rom (use:1s streps of Surface Kitchen v1.01), now i have "sys", "oem", and "rom" folders. Were i put this folders in your kitchen?
first steps!!!
Click to expand...
Click to collapse
use bepe's packagebuilder.exe on a dumped rom, after use my EXT_PAckages_rebuilder+Structures_rebuilder (attached here!) on dumped rom, finally you'll have all rom structures ready to be koocked by my visual kitchen!!!
bye!!!
P.S.: at first post "beta 2" is ready (some bugs solved!)
I finally found a way to overcome space issue that cause BuildIMGFS throw error when you put too many files in the ROM using captaintrip's kitchen
The repack used imgfsfromdump instead of buildimgfs which avoid the size issue and in additon can reduce the final size of flash.dio
The usage are the same with captaintrip's kitchen, I only rename the bat to "iPAQ61x_91x flex kitchen" since this works for both 61x and 91x
You will need to rename flash.dio to TEMPLATE.ROM and put it under ROM folder, when you run iPAQ61x_91x flex kitchen.bat it will also prompt you,follow instruction
keep in mind if you use flex kitchen to build your rom won't be able to extract it properly, anyone want to edit your room will need your kitchen instead. If you don't have buildimgfs issue you may want to stick with the old way of building rom
use iPAQ614c Rom Kitchen.bat if you want to build your rom in old way
Updated July 7th: attached new cecompr_nt.dll that fixed memory leak, necessary for LZX compression, replace the one under TOOLS folder
Download (v0.3):
mediafire
Updated: Dec 9th ,09
v4 Beta:
-improve ability to decompose ROM, however the packages in SYS and OEM portion is usually mix up so you have to manually move them to correct folder after extraction
Download:
21501 kitchen
21215 kitchen
Rom folder for w version for 21215 (Rename it to ROM if you want to build w version)
21232 kitchen
21234 kitchen
21725 kitchen - removed due to too many issue, use 21728 kitchen instead
21728 WWE Kitchen
21728 ITA Kitchen
21728 GER Kitchen
21728 FRA Kitchen
21812 WWE Kitchen
21815 WWE Kitchen
23001 WWE Kitchen
23001 CHT Kitchen
23004 WWE Kitchen
21921 WWE Kitchen
23009 Hybrid WWE Kitchen
23016 18.1 WWE Kitchen
21854 WWE Kitchen
23047 WWE Kitchen
23052 WWE Kitchen
21867 WWE Manila 24M2 Kitchen
21869 WWE Kitchen
21869 WWE Manila 25M Kitchen
23088 WWE Kitchen
28002 WWE Kitchen
28011 WWE Kitchen Beta 29
28011 WWE Beta 29_2 Kitchen - kitchen of Beta 29.2
note: you can replace WinCENLS_Lang_0404 with WinNLS_WWE (from other rom kitchen) to save ROM space
-arcsoft streaming player & codec can be removed if you don't need them
23515 xip (use with 23518 SYS)
23518 CHT Kitchen (LZX)
23518 WWE kitchen
21888 WWE Kitchen
23529 WWE Kitchen
28230 WWE Kitchen
23544 WWE Kitchen
23563 WWE Kitchen
91x 28011 WWE Kitchen -not tested since i don't own 91x device so use as your own risk, use dnw in the worst case
91x 23518(23515)/21888 untested xip
Official WM 6.5 Tookit/SDK/Emulator: here
FCC Information for 610c
FCC information for 910c
----------------------------------
Structure Overview
XIP is the kernel, this is also what you see those 2xxxx build mean, the whole term is called "Execute in Place", i.e execute files in rom directly without copying to ram, this is for boot process, anything wrong mean you will stuck in clean boot
OEM is for device/manufacturer specific program/drivers
SYS is for Windows Mobile system files
A package is a folder with at least a dsm file,all other files are extra
-rgu file is just reg file which you can use notepad to edit
-default all files goto Windows directory (obviously exclude rgu file)
-initflashfiles.dat/txt is a text file with instruction to move files to different directory
Files vs Modules
Modules are folder with ".dll" in their names. Inside the folder there is imageinfo.bin, S00X where x is a digit. When they are cooked into ROM they will become dll with proper relocation (done by WMReloc/G'Reloc). Supposedly being modules would make them load faster(because no need to relocate at runtime?) and some dlls must be in modules or else some program will not work properly. However there are also cases that modules must be converted to files.
Technically you can put everything in SYS since at the end buildOS will merge everything together but it is easier to manage if you follow the OEM/SYS structure
Common Issues TroubleShooting
hang on 1st boot screen (HP Logo)
-XIP porting issue, .rom , .vm file not correct .etc
hang on 2nd boot screen (WM splash screen)
-module did not relocate properly (did you run WMReloc or GReloc?)
-XIP (lower possibility, i don't think it affect..just in case you should keep in mind)
hang/crash on today screen
-software conflict/missing .etc , check your SYS/OEM files
Endless HP update/customization engine
-happens because of different model uses different customization engine, using one from other model/region will cause it to rerun every boot time, the only solution seem to prevent it to run from start by removing it from initflashfiles.dat. Convert all the fix into packages and integrate to the rom instead
installed SIP(virtual keyboard) cannot be switched
-use recmod (under tools folder) to convert all modules into files in browsingie folder
cannot compose new sms/email .etc
-replace redist_lang_[lang_code] folder with one that worked before
wifi cannot turn off after boot
-set HKLM/Comm/SDIO86861/Wireless to 1
XIP
To insert ported xip, run this command: osnbtool -c TEMPLATE.ROM 1 xip_out.bin
where xip_out.bin is your new XIP file
xip porting tutorial can be found all over the place in xda/ppcgeek .etc
Also make sure in ROM folder, the boot.rgu is from your device xip (the kitchen I provided only contains 61x xip so to cook for 91x you need to put 91x boot.rgu instead)
Phone Radio
rilgsm.dll is needed but usually it is in OEM folder
PagePool
Overview: xda wiki
edit using pagepool_by_wlodixon under flash folder, copy your flash.dio and run the appropriate cmd
The only exception is if the rom set pagepool to 0 (Dynamic PagePool), it won't able to recognize and you have to hex edit
hex edit the xip.bin at 0x000A75E4, change all 4 bytes to your desired value (all 0 for dynamic pagepool)
Convert cab to OEM
get package creator here
use it to open cab, then wince cab analyzer opened, choose extract folder icon, after close wince cab analyzer, you will be present with shortcut screen, do you things and hit done, finally hit complete package unless you want to change some option
Create simple cab for file/reg changes
get QuickCab
Xt9
corresponding lang files in OEMApp/OEMLang_#### where #### is the 4 digits lang ID
-[2letter langs code]hpd.ldb
-[2letter langs code]lbUN_xt9s/lsUn/.etc].kdb
-et9.SQR.[Language].bmp [Optional, some language like Polish/Portuguese just point to english bmp in registry]
-[a bunch of number/digit known as GUID].rgu (if you open it up you will find there is registry on xt9)
also under OEM\OEM_Lang_[Lang number]
-initflashfiles.dat (actually you can use notepad to open it and seacrh for ldb/kbd/bmp to see which lang files )
cooking different language
-you will need your language OEM folders from original HP rom
-your language wince.nls
-replace all language mui (e.g 0409=English) with your language mui
-some languages may added extra folders, be sure to copy them into SYS too
-sometime the hp customization/update will end up endless run in every start, in this case you will need to prevent it from running and integrate all updates into the ROM
OptionXML Addon
I have written this small .Net 3.5 App to generate option.xml for SYS packages which will allow you to select the common package and different language more easily without moving folders all the time, just unzip the zip to kitchen which will overwrite the existing batch file and put the exe under TOOLS folder.
To select/UnSelect a category in BuildOS, you can click on the Category group (e.g click on 0409 will select all 0409 packages in SYS), then click on one of the packages will select/unselect the whole group
Reserved for extra space in case
-------------Step by Step guide for xip porting-----------------------
Make sure you read this tutorial first
1. copy(either get it from kitchen or dump it using osnbtool) the existing xip_out.bin and rename it to xip.bin, open xipport, click dump xip.bin and you will get a OUT folder
2. choose write map then make packages , now rename this out folder to some other name
3. dump the new xip(from other device) using osnbtool, rename it to xip.bin & do the same as step 2 with xipport
4. now copy MSXIPKernel & MSXIPKernelLTK under Modules and Files folders from OUT folder(from step3) and overwrite to corresponding 61x OUT folder(from step1)
4.5 as said in the xda tutorial, remove hd.dll, osaxst0.dll folders and their corresponding text files under modules to avoid physical address overlap
5. use xipport to undo and then realloc and write maps. Then you check map files to make sure there is no !!!(memory address overlap) I recommend using XIP address tools to check for overlap, sometime you will get error when you realloc (key already exist .etc), use xip address tool and set work folder to OUT then you will see error on first dll addr which you have to fix all highlighted red cell(overlapped address). Note that to fix first dll addr address you have to highlight the cell, enter the new start address on the V address cell in bottom, click modify, then use mouse to highlight the 1A cell above, and change the D address cell to the same as V then click modify button(on the right of V cell). You should see the change in table then. For virtual base overlap you only need to modify V cell only
Note: first dll addr overlap will result error when you click realloc in xipport.
The goal is have no overlap as shown in MAP.txt. When there is no more overlap, use xipport to build xip_out.bin and then insert the xip into the dio file using osnbtool
Commands:
extract xip: osnbtool -d flash.dio 1 xip.bin
insert xip: osnbtool -c flash.dio 1 xip.bin
also make sure your ROM\boot.rgu is from your device xip
-----------------------------------
IPAQ 91x boot keys:
Clean bOOt - Voice Commander + OK + Reset
Download Image - Volume Down + OK + Reset
Calc Checksum - Volume Up + OK + Reset - disconnected, SD card out
RUU - Volume Up + OK + Reset - UsbConnected, SDcard out
SDloader - Volume Up + OK + Reset - USB disconnected,SDcard in SDloader
Modem_CAL - Voice COmmander + Volume Up + Reset
Diagnostics - Voice Commander + Volume Down + Reset
-------------------------------------
LZX Compression:
The default compression algorithm for ROM is XPR, if you must include lots of files that causes your resulting rom >80mb under XPR(81920kb - ROM Size limit for 61x, bigger than this the device won't boot), you need to use LZX compression. It reduces rom size by ~13% but with ~1-3% performance hit(from other post I read, I never verify the performance hit).
To use LZX compression, you need to replace the cecompr.dll folder in XIP Modules with the one attached in this post. Re-port the xip (realloc + write map + build xip_out.bin) and then use osnbtool to inject the xip inot TEMPLATE.ROM.
Then hex edit the imgfs_raw_data.bin in the rom kitchen, replace the first string "XPR" without quote you found with "LZX" without quote.
Make sure you have replace the cecompr_nt.dll under tools folder of the kitchen with the one I attached in 1st post to avoid memory leak
Now just build normally, you will notice the time to inject file will take much longer because of the compression
Is there any ROM kitchen tools for hp iPAQ h6365 WM2003?
Wow great kitchen. Thanks for sharing.
here, here! keyx you da man
One thing though - when you say this:
Phone Radio
if you are using SYS from other device, make sure you replace ril.dll and phone.dll from a working rom in phoneRedist or you will get a phone radio not installed which disable phone function
rilgsm.dll is also needed but usually it is in OEM folder
Click to expand...
Click to collapse
I'm not sure that is actually correct. I've been using ril.dll and phone.dll from all kinds of donor SYS; these are OS files that should be generic. It is only rilgsm.dll that is manufacturer-specific.
you are right, I corrected the post
I think I do anything wrong...
If I extract your ROM(WM 6.5 Beta 3.81) and put it together to a ROM again, it is 10MB smaller.....After extracting this, its 1MB smaller...
Question is, why?
Greets
chucknican
actually for unknown reason if you use my kitchen to build rom, you won't able to extract it properly...i am not sure why. But currently it is the only solution for me to overcome buildimgfs error
so the solution is that I use captaintrip's kitchen to extract and yours to build it together again?
I can't get this kitchen to build my ROM. The after WMReloc does the modules rebase, I get the following feedback...
Code:
Injecting files ...
Input file imgfs_raw_data.bin cannot be opened. Exiting.
In fact, when I watch the temp folder during this process, I see no imgfs_raw_data.bin at all. In your new script, I can't see where this file would come from anyway.
Help?
chucknican said:
so the solution is that I use captaintrip's kitchen to extract and yours to build it together again?
Click to expand...
Click to collapse
no in fact i will need to upload a kitchen as the result rom using my flex kitchen will not be extracted properly
benjaminries said:
I can't get this kitchen to build my ROM. The after WMReloc does the modules rebase, I get the following feedback...
Code:
Injecting files ...
Input file imgfs_raw_data.bin cannot be opened. Exiting.
In fact, when I watch the temp folder during this process, I see no imgfs_raw_data.bin at all. In your new script, I can't see where this file would come from anyway.
Help?
Click to expand...
Click to collapse
you have to run "prepare_imgfs flash.dio -nosplit" to get the imgfs_raw_data.bin first, this process is done when you extract a rom before but if you just directly use it to build a rom you need to manually run the command on a flash.dio first
Also keep in mind if you use flex kitchen your rom won't be able to extract properly, anyone want to edit your room will need your kitchen instead. If you don't have buildimgfs issue you may want to stick with the old way of building rom
keyx said:
no in fact i will need to upload a kitchen as the result rom using my flex kitchen will not be extracted properly
you have to run "prepare_imgfs flash.dio -nosplit" to get the imgfs_raw_data.bin first, this process is done when you extract a rom before but if you just directly use it to build a rom you need to manually run the command on a flash.dio first
Also keep in mind if you use flex kitchen your rom won't be able to extract properly, anyone want to edit your room will need your kitchen instead. If you don't have buildimgfs issue you may want to stick with the old way of building rom
Click to expand...
Click to collapse
So... these files go in the root folder? That's what works for me anyway. Hmm... I think this could be easily added to the script, if you ever have to release an update to the kitchen. Anyway, thanks.
21501 kitchen added on 1st post
EDITED: kitchen updated to detect missing of imgfs_raw_data.bin and extract it automatically, I also updated some tools versions
ADC and Ipaq Data Connect
Are both of these necessary? When both are installed the ADC seems to run first and configures a "Proxy Internet" Profile in the Connection Manager which lists all 3 possible connections for my data carrier, even though I can only use the internet2.voicestream.com with T-Mobile. Maybe I am not using this correctly, but once I removed the ADC, the ipaq data connection worked fine and I was able to connect to the internet without a problem. Is this all this app does, or is there another usage that I should leave it installed for?
Thank-you
you can remove ADC if you don't want it, i think it just help to setup data connections
Customization
Keyz
I have removed some of the OEMs from the kitchen, but am not sure that I modified the initflashfile.dat correctly,will you look at it for me and see (I highlighted what I have removed)? If I remove the entire last 3 lines that contain the Utility file the device does not reboot from sdlauncher when installing. When I leave the last line in it is very speedy to install and reboot, but I have the empty utility Folder in my programs folder! I also had tried to add the BSPropCab.cab to the OEM folder but cannot get it to install correctly. I saw that you had it installed in one of your previous roms along with the other 2 arc cabs. The arc cabs I can get to work, but I really dont want to put them in, just the bsprop. Is this possible?
In OEM I added Coreplayer, PdaNet, SKTools5, Live Search, Google Search and WM5torage1.9. I had to add Google Search in here because I could not get it to work by adding the original files back into the OEM App folder: In Systems I removed ADC, VOIP and One Note, replaced NETCF with NETCF3.5, and added Transcriber back in. I thought about removing WMWidgets, I use all SPB Software, but I dont understand all of its functions, I have Googled it and there really isnt alot out there about it. What I did find though makes me think Microsoft will add more function to it once the official 6.5 is officially released-So I will keep that. For me this is a very good ROM, you have done an excellent job with modifying the kitchen.
Thank-you
Sunday
Where do you test the new roms? In the device or in somekind of emulator?
gkleding said:
Keyz
I have removed some of the OEMs from the kitchen, but am not sure that I modified the initflashfile.dat correctly,will you look at it for me and see (I highlighted what I have removed)? If I remove the entire last 3 lines that contain the Utility file the device does not reboot from sdlauncher when installing. When I leave the last line in it is very speedy to install and reboot, but I have the empty utility Folder in my programs folder! I also had tried to add the BSPropCab.cab to the OEM folder but cannot get it to install correctly. I saw that you had it installed in one of your previous roms along with the other 2 arc cabs. The arc cabs I can get to work, but I really dont want to put them in, just the bsprop. Is this possible?
In OEM I added Coreplayer, PdaNet, SKTools5, Live Search, Google Search and WM5torage1.9. I had to add Google Search in here because I could not get it to work by adding the original files back into the OEM App folder: In Systems I removed ADC, VOIP and One Note, replaced NETCF with NETCF3.5, and added Transcriber back in. I thought about removing WMWidgets, I use all SPB Software, but I dont understand all of its functions, I have Googled it and there really isnt alot out there about it. What I did find though makes me think Microsoft will add more function to it once the official 6.5 is officially released-So I will keep that. For me this is a very good ROM, you have done an excellent job with modifying the kitchen.
Thank-you
Sunday
Click to expand...
Click to collapse
what do you mean by bsprop not installed correctly? if you convert it to OEM folder correctly it should work but if you leave the customization engine run on startup there is no point to preinstall bsprop since it will reinstall again from ipaq file store(unless you did not install the update before).
Also if you modify initflashfiles.dat i believe you should use hex editor to remove the FF FE header added by notepad.
Sometime when you flash a lot the device will act weird & does not reboot from flashing, you can try to clean boot it or reflash. I think you can remove all highlighted entries without issue. You may need to leave a blank line at the end of file though.
wmwidget is a widget engine that can run apps that use pie as a container/interface, for me it looks kinda like a shortcut to a webpage, msn weather/money .etc are the sample widget come with 6.5 for now. You can remove it if you don't use it.
SwimmerBoy said:
Where do you test the new roms? In the device or in somekind of emulator?
Click to expand...
Click to collapse
device only until i figure out the emulator issue
Hi. Everyone.
At first, I'd like to appreciate all you guys. I've learned so many things from you.
Thank you so much.
This time I wanna ask you for giving me hands.(again~) And I hope someone would help me ^^
I'm trying to port WM6.5(0409) into my SCH-M490(0412, this is the Korean domestic version of the Samsung Omnia phone).
As far as I've searched for the way how to do it,
I found that I have to replace XIP, SYS and MUI with released WM6.5 ROM.
But I'm still confused what exactly I should do.
I'll describe here the process that I will go.
plz correct wrong one or add insufficient information.
# Preparation
1. Download SCH-M490's WM6.1 PDA.BIN Rom file and i900's WM6.5 ROM (PDA.BIN of course)
2. Download all tools I need (osbntools.exe, xipport.exe, dump.exe and so on.)
# XIP Porting (I think I already succeeded this)
1. Dump original WM6.1 ROM and extract XIP.BIN.
2. Dump i900's WM6.5 ROM and extract XIP.BIN, too.
3. With xipport.exe, dump them both and make packages.
4. Replace original XIP.BIN's MSXIPKernel package with new XIP.BIN's one.
(I know I have to do this for both FILES and MODULES folders)
5. Remove some module's which are known as unnecessary. (If I meet the alert saying "not enough space" when realloc. such as hd.dll, osaxst0.dll and so on)
6. Realloc P, write maps, check collisons, correct them (if any), build xip_out.bin.
7. insert new "xip_out.bin" into OS.NB by using osnbtool.exe.
# SYS replacement
1. Remove all files from original WM6.1 dump's sys folder, but .ROM and .VM folder.
2. Copy all files in the sys folder of WM6.5 ROM (except .ROM and .VM folder) to original dump's sys folder.
# MUI Translation
1. Find all files that have string "0412" for their file names (mostly, they will be in the OEM dump folder I guess).
2. Rename them (0412 -> 0409).
3. Open every mui file,which has .mui as their file extention, with reshacker.exe.
4. Translate resources as many as I can and Recompile them.
5. Find all *.rgu files in the OEM dump folder.
6. Open them all and find string "0412" and change them to "0409".
# Flashing
1. Build a rom.
2. Download the Rom to my M490 by using UMDL_GrandPrix_V1.8.1
So.. I wanna change
Language : 0412 -> 0409
OS : WM6.1 -> WM6.5
Are there something wrong? Are there something I missed? (I'm not talking about my grammar. lol)
I wish if someone would answer you!!!
I think in the SYS folder, you can replace the .ROM folder. But, you cannot replace the WinCENLS_WWE folder, I think.
Also, inside the SYS/Shell folder, you shouldn't replace shell32 and shellres.
That's what I've read. I'm pissed that I can't get this working either, though!!!
are you using that phone in the US?
If so which provider are you using and where can i buy one!?
ace10134 said:
I wish if someone would answer you!!!
I think in the SYS folder, you can replace the .ROM folder. But, you cannot replace the WinCENLS_WWE folder, I think.
Also, inside the SYS/Shell folder, you shouldn't replace shell32 and shellres.
That's what I've read. I'm pissed that I can't get this working either, though!!!
Click to expand...
Click to collapse
You are correct about a few things here, but not everything.
You are right about the WINCENLS. This is usually device-specifc and should not be replaced when cooking. The .ROM can be replaced but not the .VM.
Now, as far as I understand rom cooking, the shell is changed from build to build. You may end up with weird, unstable results if you don't match it with the rom you are trying to cook.
@samuel281,
I think you pretty much nailed everything down. What exactly isn't working for you? It isn't flashing, booting, doesn't create the rom (error in the build process)?
One other thing, as far as the SYS, all you need to replace are the Files and Modules. You just need to make sure that you are using what you are supposed to (either Files or Modules).
Welcome to my tutorial in cooking for the TG01.
I shall no longer be updating this thread, so please feel free to post and make any contribution you see fit.
This is meant to be a very simple, plain English guide to cooking.
With this in mind i will not be showing you how to port a new sys/xip or any of the more advanced features like sense
lets just see if we can dump, modify, build then flash a working, booting ROM for now.
This tutorial is only what i have learnt whilst beginning to cook my own ROM, so if you find a mistake or have something to offer feel free to post
If you have a question that your going to post, please please search the forum first, i learnt a lot of what i know from threads that have nothing to do with the TG01 or even the type of kitchen we're using. So as the rules state - Search before posting, Thank you.
Modifying the ROM of a Windows Mobile is dangerous to your devices health. If you mess it up it can be fatal.
The information contained in this tutorial is only as far as i am aware. Don't blame me if you brick it.
Having said that, i have never had a problem the short pin method couldn't fix.
You will need the attached .zip file, it contains the kitchen and associated applications.
In this tutorial i am using L3V5Ys kitchen, cab converter by Jason8, Package converter by Total Fire and Package Creator by Ervius.
So thanks to them and everyone in the XDA community for making this kind of thing possible.
1. Dump a ROM
1.1. Download the ROM you wish to modify. I suggest Miros miROM4, its clean and fast without any clutter.
1.2. Extract the ROM and place the resulting .tsw file in the BASE folder in the kitchen. Then rename it "TG01WP_5005000176.tsw"
1.3. Run dump.bat and wait for it to finish, this could take a little time depending on you PC, it may be worth making a tea as it seems to take longer if you watch it.
1.4. You should now have some new folders in your kitchen, for now the only one were interested in is SYS.
2. Modify a ROM (Removal of packages)
2.1 Open your kitchen folder then open the SYS folder,
2.2 You should now be faced with a window with lots of folders in it. The folders are called packages.
2.3 Delete the package Entertainment and its associated packages (Entertainment, Entertainment_DPI_192, Entertainment_Lang_0409 and Entertainment_Lang_0409_DPI_192)
2.4 This has effectively deleted the games that ship with your chosen ROM,
2. Modify a ROM (Adding packages)
2.1 Open your kitchen folder then open the SYS folder.
2.2 Copy the package from its source to the SYS folder. Remember that for this kitchen it must be an OEM\old type package (see post #4)
2.3 Thats it, you added software to your custom ROM.
2. Modify a ROM (modify existing package)
2.1 Open your kitchen folder then open the SYS folder.
2.2 Open the folder titled "Redist_dpi_192_resh_480_resv_800"
2.3 Replace welcomehead.192.png with the one in the downloaded zip.
2.4 That's it, when you boot your new ROM it should show the new welcome screen.
3. Building and flashing a ROM
3.1 Run "2. build no XIP port_no auto.bat" (this is the original build.bat, modified by myself to skip the port xip and BuildOS/auto parts)
3.2 When the cmd prompt opens press any key
3.3 When BuildOS opens check the packages you wish to install then click the green arrow in the top left.
3.4 When BuildOS has finished, close it and the cmd window will carry on opening and closing other programs as it goes. You do not need to touch any thing till it has finished and it asks you to hit enter.
3.5 Assuming you pressed enter when it asked, the cmd window will have now closed.
3.6 Go into your kitchen folder and you should have a new file called "TG01WP_00.tsw" This is your ROM.
3.7 Copy "TG01WP_00.tsw" to a folder called PRG on your storage card (if its not there then create it) and then run SDDL+ or use the short pin method to flash it.
3.8 That should be it, you should now have the rom you started with but minus solitaire.
The Kitchen:
In your "Kitchen" you will find some folders and some files. They all relate to either the ROM ityself,
or the tools used to edit/dump/create the ROM.
BASE - This is the folder in which you put the rom you are dumping
OEM - This is the folder where the Toshiba part of the ROM would be if it was an official Rom that was being dumped,
however when dumping a cooked ROM this folder will be empty as a cooked ROM cannot be dumped correctly by the tools available
and all packages are put in the SYS folder. This will not affect the output, and the OEM packages can be left in the sys folder.
If you dump a cooked ROM you will need to create the OEM folder as BuildOS panics without it, even if its empty it needs to be there.
SYS - This folder contains the dumped ROM separated into packages
ROM - This folder contains the xip, boot.rgu and boot.hv. For this tutorial we won't be working with anything here.
TOOLS - This is where the exe's are that make up the kitchen, you don't need to touch these, the .bat files do it all for you.
Temp - This is the kitchens working folder, you don't need to go here unless there are problems building the ROM but that is beyond the scope of this tutorial.
Packages: (there are 2 types, EXT and OEM, our kitchen can only handle OEM so thats what i'll be discusing)
Each package contains an element of the ROM. For example the BROWSING package contains the parts of the ROM required for internet browsing.
For a package to be usable it requires certain things
Required:
.dsm file - This is to complicated for the scope of this tut so for now just accept that this file is necessary and should never be deleted. All dsms must have a unique name.
That is all a package needs to be a package, though without any files in it won't actually do anything.
Optional:
.rgu file - This file contains the reg entries for the package in question and its name will be the same as the .dsm file in your package.
initflashfiles.txt / initflashfiles.dat - This file tells the PPC where to put the files that are within the package, ie. a short cut to a program in the start menu.
NOTE without an initflashfiles.txt all items within the package will go to the Windows folder.
option.xml - Holds information relevant to the package
The files you wish to install, without them its pretty pointless.
Packages often have other packages associated to them, for example the Entertainment package also has Entertainment_DPI192, Entertainment_Lang_0409 and Entertainment_Lang_0409_DPI_192.
Where Entertainment is the package, Entertainment_DPI_192 has the files specifically for our screen size, Entertainment_Lang_0409 has the files for our language (0409 is WWE)
and Entertainment_Lang_0409_DPI_192 has files that are for our lang and our screen size.
Modifying a .rgu file:
.rgu files contain registry information for the package they are in. If you wish to modify this data then you can do so with notepad, though i recommend downloading Notepad2. If you open a .rgu file and don't understand what's in it then you need to go learn about windows registry editing first. I am assuming that if you are looking at building a custom ROM you already know about reg editing.
CAB Converter:
This program is used to convert a .cab file into a package to be cooked into a ROM
1.Open CAB_Converter.exe
2.Click "add a cab" and browse to your cab or drag and drop your cab into the window
3.Click on the text representing your cab at the top of the window so its selected.
4.Click CAB->OEM, and wait till its finished. Should only be a few seconds.
5.Your package will be in the CAB Converter folder in the converted OEM folder
Package Converter:
Our kitchen only supports OEM\Old type packages, so what if we want to use an EXT\Visual type package? Well Total Fire kindly made and distributed a tool that converts from one to another.
The program is fairly self explanatory but i'll quickly cover converting from a visual to an old package.
1.Open the converter, then click "select" where the greyed text say package,
2.Browse to and open your visual package.
3.click "Convert VTO", now wait till you see "Conversion Complete".
4.Your now usable package will be in the same directory as the visual package with the text "PACKAGE TF" added to the title.
Package Builder:
If you wish to create your own packages, this is the tool to do it.
1.Create a folder named whatever you want your package to be named
2.Add to it the files you want
3.Add to it a .reg file if required
4.Open package Creator, in the bottom right you can choose ITA or ENG.
5.Click open package and browse to the folder you created.
6.Now the initflashes.txt options page appears, here you can select the .exes in your package and choose where to create short cuts. You will need to click apply on each one.
7.Now click complete package.
8.The creator will now create a .dsm file, a .rgu file with your .reg file settings in, an initflases.txt file and an option.xml file within the folder turning it into a package.
9.This package can now be used in your kitchen.
Reserved...
Reserved....
leeston2379 said:
CAB Converter:
This program is used to convert a .cab file into a package to be cooked into a ROM
1.Open CAB_Converter.exe
2.Click "add a cab" and browse to your cab or drag and drop your cab into the window
3.Click on the text representing your cab at the top of the window so its selected.
4.Click CAB->OEM, and wait till its finished. Should only be a few seconds.
5.Your package will be in the CAB Converter folder in the converted OEM folder
Click to expand...
Click to collapse
Thanks for a lovely tutorial! Makes sense!
I am continuously facing this attached error! Any ideas how to solve this! :s
Wich cab do you use ?
What is your Operating System ?
EVEALEX62 said:
Wich cab do you use ?
What is your Operating System ?
Click to expand...
Click to collapse
I used Opera.cab (opera 10) and with windows 7
EVEALEX62 said:
Wich cab do you use ?
What is your Operating System ?
Click to expand...
Click to collapse
chek property of your folder in c: or test to reinstall this program with administrator right (clic right).
Can you send me MP with your cab, I'll test tomorow morning
Have a good night
drupad2drupad said:
Thanks for a lovely tutorial! Makes sense!
I am continuously facing this attached error! Any ideas how to solve this! :s
Click to expand...
Click to collapse
Its better to grab hold of one of the existing opera packages on the forum, I never successfully converted it to a working package. Just seemed to be the opera cab as i have no problems with any other. I think ninjaduck does a nice version with flash and the like already in.
I never saw that particular error myself though. Sorry I can't be more help.
So long and thanks for all the fish.
I will no longer be updating this or any of my ROM threads as its upgrade time and I've got a shiny new Desire HD, my trusty TG01 has been retired and i'm off to have a bodge with Android.
The TG01 forum is a nice little place with only a hand full of regular contributors/posters but its always friendly and development seems to move along at a steady pace, so thanks to all its members for that.
To those who PM me, feel free to continue as i will still be around here somewhere and will help in anyway i can.
See you later.
leeston2379 said:
I will no longer be updating this or any of my ROM threads as its upgrade time and I've got a shiny new Desire HD, my trusty TG01 has been retired and i'm off to have a bodge with Android.
The TG01 forum is a nice little place with only a hand full of regular contributors/posters but its always friendly and development seems to move along at a steady pace, so thanks to all its members for that.
To those who PM me, feel free to continue as i will still be around here somewhere and will help in anyway i can.
See you later.
Click to expand...
Click to collapse
i have one samsung galaxy tab and next week i get also one HTC Desire HD of my company. Android is really good- but more fun i have with WinMo.
today i have get my second "new" tg01!
you were ever friendly and helpful. thank you for your activity and cooking for our tg01 community.
i wish you all best, good luck and cheers, miro
leeston2379 said:
I will no longer be updating this or any of my ROM threads as its upgrade time and I've got a shiny new Desire HD, my trusty TG01 has been retired and i'm off to have a bodge with Android.
The TG01 forum is a nice little place with only a hand full of regular contributors/posters but its always friendly and development seems to move along at a steady pace, so thanks to all its members for that.
To those who PM me, feel free to continue as i will still be around here somewhere and will help in anyway i can.
See you later.
Click to expand...
Click to collapse
Hi Lee!
TG01 community will miss your contributions! In case your retired TG01 lures you back to development, I will keep my eyes peeled. I hope you like your new android, but in case, Winmo is missed (I wish!), do come back!
Hi.
Leeston2379 will not be doing any changes here any more so I allow myself to upload my version of his kitchen here without creating new thread.
What has been changed ?
"Virgin" kitchen was only for packages modification without any pagepool changes or xip porting. Leeston2379 was basing on l3v5y kitchen which have certain bug. Interestingly this bug was "not active" as far as old ( original ) xip.bin was taken in .tsw file creation.
There are 4 batch files for new system building:
a) 2. build_without_xip_port.bat - the same as original leeston2379 batch but with fixed bug although here it is not "active"
b) 2. build_without_xip_port_pagepool_set.bat - allows to set pagepool size
c) 2. build_with_xip_port.bat - like original but allows to port new xip
d) 2. build_with_xip_port_pagepool_set.bat - like original but allows to set pagepool size and port new xip
I did not utilize automatic execution via for example
AutoExecAndClick.exe /launch "xipport.exe" /clickbutton "dump xip.bin" /clickbutton "write maps" /clickbutton "make pkgs" /kill
In my oppinion it is buggy . There are any timing races or something other causing any strange errors from time to time. User has to like in original l3v5y kitchen press different buttons in xipport software.
Thanks Mangasora for his post concerning porting xip
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi.
Leeston2379 will not be doing any changes here any more so I allow myself to upload my version of his kitchen here without creating new thread.
What has been changed ?
"Virgin" kitchen was only for packages modification without any pagepool changes or xip porting. Leeston2379 was basing on l3v5y kitchen which have certain bug. Interestingly this bug was "not active" as far as old ( original ) xip.bin was taken in .tsw file creation.
There are 4 batch files for new system building:
a) 2. build_without_xip_port.bat - the same as original leeston2379 batch but with fixed bug although here it is not "active"
b) 2. build_without_xip_port_pagepool_set.bat - allows to set pagepool size
c) 2. build_with_xip_port.bat - like original but allows to port new xip
d) 2. build_with_xip_port_pagepool_set.bat - like original but allows to set pagepool size and port new xip
I did not utilize automatic execution via for example
AutoExecAndClick.exe /launch "xipport.exe" /clickbutton "dump xip.bin" /clickbutton "write maps" /clickbutton "make pkgs" /kill
In my oppinion it is buggy . There are any timing races or something other causing any strange errors from time to time. User has to like in original l3v5y kitchen press different buttons in xipport software.
Thanks Mangasora for his post concerning porting xip
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
2. build_without_xip_port_pagepool_set.bat is my mod based
on leestone 2. build_without_xip_port.bat. bug?
please explain a little bit better: what you have do, what changed, the method for xip porting and how works? i hope is testet from you