Database Users

Hang vibrate cannot stop

I use HTC Touch Dual and seems to have hang problem when sms coming with vibrate. The vibration is not going to stop and the screen just freeze.
I tried hard reset, and don't install any program, but the same problem still happen. i also use the original tone given from HTC. It's not always but it's the one that bugging me lately. Maybe you guys have idea what the solution?
Thanks in advance

i also having similar problem sometimes when received a SMS the phone will non-stop vibrating until you softreset or received another SMS but that's no freeze like teguh36.

same issue here... turned vibration off for sms for the time being... device doesn't 'crash', but it won't stop vibrating... Is this a female phone or sumthin? ;-)

Thanks for sharing guys.. seems like hardware prob, ya lesteryh.. mine exactly like yours.. still can do softreset after the vibrating go crazy

Quick Fix
teguh36 said:
Thanks for sharing guys.. seems like hardware prob, ya lesteryh.. mine exactly like yours.. still can do softreset after the vibrating go crazy
Click to expand...
Click to collapse
I also have the same issue but no freezing.
A quick fix I use is to jump to the Profiles tab, click Vibrate and then back to Automatic (I usually keep it on Automatic). This does the trick without having to do a soft-reset

just noticed the same problem! happened twice today!

u guys still have this problem?
has been happening twice a day since yesterday (installed PointUI yesterday ...)

happened to me too..
I suggest don't let it vibrate when you receive a text message
that's what I did

[PROB] HD going on by itself from standby.

Anyone experienced the same issue? After using the phone I press the power button but after few secs. the screen goes on again and its annoying.. Especially when I take out my HD from pocket and I see it. It was happening on stock rom now on Duttys. Could it be hardware issue with the button?

NikPraskaton said:
Anyone experienced the same issue? After using the phone I press the power button but after few secs. the screen goes on again and its annoying.. Especially when I take out my HD from pocket and I see it. It was happening on stock rom now on Duttys. Could it be hardware issue with the button?
Click to expand...
Click to collapse
Try it without stylus inside. maybe faulty stylus thats what happened to me.

I have exactly the opposite, I switch it on, and a second later it switches off again!!

Faulty stylus? Do you mean that I try using the other one or?
When we´re already talking about the stylus, I noticed that sometimes when I pull it out my HTC doesn´t wake up from standby.. That didn´t happen on my Diamond.
The only solution I found so far is using the device lock after 0min. so I could avoid accident calls in my pocket. But there is the annoying PIN nr. every time... :/

Today I noticed, the device keeps going out of standby cca. every 10-20mins. Bad. The screen turns on and after few secs off..

mine too, every 10/20 mins.
will be some software doin it i think.

SOLVED: Rejecting calls starts volume controls

Hi!
This is my first post here. I'm using an HTC Touch HD for three months, and before this I used an HTC Touch Cruise.
The problem is that, every time I reject an incoming call using the slider, volume controls appear in the device display, and volume is increased automatically by one point. It also happens sometimes when ending a call with the slider. If I reject or end calls with the right hard button, everything works fine.
I have installed AEButton plus and 'Touch In Call Screen Tweak', but I don't think it's got something to do with the problem.
Is this happening to someone else? Does someone know a fix for this?
Thanks.

jfrba said:
Hi!
This is my first post here. I'm using an HTC Touch HD for three months, and before this I used an HTC Touch Cruise.
The problem is that, every time I reject an incoming call using the slider, volume controls appear in the device display, and volume is increased automatically by one point. It also happens sometimes when ending a call with the slider. If I reject or end calls with the right hard button, everything works fine.
I have installed AEButton plus and 'Touch In Call Screen Tweak', but I don't think it's got something to do with the problem.
Is this happening to someone else? Does someone know a fix for this?
Thanks.
Click to expand...
Click to collapse
i'd be willing to bet that the installed app is the cause of your problem. simply uninstall it, soft reset and see what happens.

Thanks for your help. It seems that AEButton plus is causing the problem. Uninstalling it made the fix. I'll try to modify the app settings, and see if I can keep it without these bugs.

WP7 End Call Issue

Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon

jonathan.stowell said:
Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
Click to expand...
Click to collapse
Did you not try the end call on the screen? Not the hard one on the bottom right of phone
Russ

The screen turns off when making a call so the touch buttons are not available. This is why I have to remove the battery as I have no other way of bringing the display back to life. Obviously if I make a call and the other person hangs up it's fine. However if they do not answer and it goes to voicemail or I call my voicemail I get stuck in a never ending loop of press 2 to hear your messages.

jonathan.stowell said:
The screen turns off when making a call so the touch buttons are not available. This is why I have to remove the battery as I have no other way of bringing the display back to life. Obviously if I make a call and the other person hangs up it's fine. However if they do not answer and it goes to voicemail or I call my voicemail I get stuck in a never ending loop of press 2 to hear your messages.
Click to expand...
Click to collapse
Official windows phones have no hard end call button, just the on screen one, therefor I dont think its possible to end a call with the hardware button. Yes, the screen goes off when making a call, but due to the proximity censor it should come back when you move it away from your head. If it does not, make sure its not covered, even a screen protector can block the proximity sensor. Its located next to the speaker.

Hmm I removed the screen protector and still no joy when I move the phone away from my face. The screen just remains black. I did crack the screen about 5 months ago and had it replaced, perhaps they've done a poor job on this....

Don't think so... My is in perfect shape. proximity works on android but not on wp7... i also can't press end call button.

same thing with me
well i get the same problem with mine also, is there anything we can do for that.

I have the same issue, though it only happens to me when calling my voicemail. I hit "end call" and it just hangs there with the message "Ending call..." and I have to pull the battery :/ Regular phone calls have been just fine though.

Finally cracked this one!
I have been experiencing this issue on my Optimus 7 phone since day one, on all firmware versions and I now have the latest update.
This is what worked for me:
-set the automatic brightness to off and choose any manual setting that suits your needs, I chose medium.
-set the screen timeout to never (not sure that this is necessary, I will change it back to 30 sec to see if the issue returns and post back)
I hope this works with your phones, it was really frustrating to pull the batery out. Good luck!

I've had this issue as well. Pressing the end call button on the screen won't end many of my calls, voicemail or to another person. But it's rare enough that it hasn't bothered me, too much. But is a problem that needs to be figured out, if possible.

We should come up witha way to re map the hard buttons to usefull use

jonathan.stowell said:
Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
Click to expand...
Click to collapse
I'm assuming your phone is an HD2. First of all, the call should automatically end when the other party hangs up. Secondly, just hit the Power button to turn the screen back on and then unlock the phone and hang up. What is so difficult? WP7 remaps the HD2 buttons so they don't work as they did in WM.

swangoose said:
I have been experiencing this issue on my Optimus 7 phone since day one, on all firmware versions and I now have the latest update.
This is what worked for me:
-set the automatic brightness to off and choose any manual setting that suits your needs, I chose medium.
-set the screen timeout to never (not sure that this is necessary, I will change it back to 30 sec to see if the issue returns and post back)
I hope this works with your phones, it was really frustrating to pull the batery out. Good luck!
Click to expand...
Click to collapse
Worked. T H A N K S!!!

[Q] Issue with Call-Waiting

Have a weird issue with my call waiting -- it just seems to go through and switch me over without notice and without my input. I'll be talking to someone, and then suddenly I'm talking to someone else .. ?!?!
Anyone else having this issue? I don't even hear a -beep- like my old phones which used to warn me of a second call ..
My theory is that when the call comes through the screen lights-up and waits for my input and perhaps my face is accepting the change-over?!
If I hold the phone and use speakerphone, I see the prompt for the second-call ..
any help appreciated!

Exactly same isssue..
Your theory is right, i'm experienced twice at least today.. There is a big green button at lower screen area while call waiting state.. It's too easy to activate one of them accidentally with your face..
Anyway, i want to change dialer, but every dialer app only change dialer, but "on-call screen" stay stock one which i don't like...
Any suggestions ?

Reason4444 said:
Exactly same isssue..
Your theory is right, i'm experienced twice at least today.. There is a big green button at lower screen area while call waiting state.. It's too easy to activate one of them accidentally with your face..
Anyway, i want to change dialer, but every dialer app only change dialer, but "on-call screen" stay stock one which i don't like...
Any suggestions ?
Click to expand...
Click to collapse
Sorry, hadn't seen your response ---
I still haven't resolved this issue either .. very annoying. I'm talking to one person then all of a sudden I'm speaking to someone else.
I've tried to reproduce the problem by having a conversation and having someone then call me .. but I couldn't .. this time I heard the call-waiting beep and it didn't switch over, it waited for my input.
When I get 'the issue', it just switches over to the other call without my permission and it terminates the first call.
I'm wondering if this is a fault with my phone, or an issue with the pseudo-roms i have on my phone like Gingerblur, gladiatrix, etc --- or the dialer itself .. shrug
no one else experience this?