Hi,
do anyone know how to enable diag port, since i want to use QXDM to log the protocol information.
Thanks
Check this out!
You may want to take a look at my post. This will virtually work with any device who's kernel source is released . http://forum.xda-developers.com/showthread.php?t=948360
Related
I managed to get QXDM work with JASJAR, for this I used the DMRouter.exe software and Qualcomm USB Host drivers (search for Axess_tel.zip). The QXDM software gets a lot of interesting information from the Qualcomm chip.
Now, the question is how can I get this information from inside the device? I would like to understand what exactly the DMRouter.exe program does, and then to communicate with the chip directly, the same way QXDM does.
Can anybody help with the disassembly of DMRouter.exe?
Hi all,
I'm wondering if there is a way to change to external usb port to become a a Qualcomm Diag and Modem port?
I have all the qualcomm drivers and software to drive it, but can't quite see how to get the unit into the right mode.
Thank-you for any info that can help
Si
SimonPage said:
Hi all,
I'm wondering if there is a way to change to external usb port to become a a Qualcomm Diag and Modem port?
I have all the qualcomm drivers and software to drive it, but can't quite see how to get the unit into the right mode.
Thank-you for any info that can help
Si
Click to expand...
Click to collapse
I may be confused by your question but you ask to "use as modem port", so you can use your device as a modem? If so, this would be accomplished by the software Internet Sharing on your device. regarding Qualcomm Diag, don't know, sorry.
Hi Bruce,
Thanks for the reply.
When I enable 'qualcomm mode' on a mobile (like a Samsung SGH-F480 etc) via an AT command, the phone will offer two ports to Windows Device Manager - Qualcomm Modem and Qualcomm Diagnostic Port.
I am after a way of making my TD2 do the same.
I hope that makes sense, its been a long week.
Simon
Yes.. it does indeed make sense.. I'm trying to do the same.
For example.. on vodafone 845 phone (U8220 from huawei) those two ports are present, but they are not on U8150 for example.
I'm trying to find out how to enable them.
Did you make any progress about this?
Hi, please help me with this. I need to activate the Diagnostics COM port in the SGH-i637.
Some info about this phone:
- This phone has a 32 bit Qualcomm MSM7201A CPU and Windows Mobile 6.1 OS.
- When connecting this phone as Modem, only modem driver is installed in Windows.
- During Flashing procedure (Turn off phone, press J, connect USB cable to PC, do not turn on phone) a Qualcomm device is detected and installs a COM port.
- Entering *#197328640#, then Option 9 (Common), then Option 4 (Diag_HFK_Configuration) only UART3 and UART 2DM are available (no USB Diag)
- Entering *#7284# nothing happens. Running Emchanger.exe or dataconnection.exe, you can choose between PDA or USB mode, but nothing happens.
- This phone is very similar to Samsung GT-B7320 and GT-B7330, on those both phones, changing from PDA to USB works (entering *#7284#) and installs the Diag COM Port.
So, any clue if there is a way to activate the Diagnostics port on this i637 smartphone?
Thanks!
Samsung GT-B7330 QXDM
I'm also working with QXDM and Samsung phones. I'm trying to used the USB modem mode(*#7284#) on my GT-B7330 but I can't find the right windows driver for it. Could someone provide me with the Samsung USB modem for the GT-B7330
I've search on the web and although I found many versions I could not get one which worked with the GT-B7330
Thanks
Running Emchanger not happening
as i wrongly updated my gt-b7320 to AT&T sgh i637 windows 6.5 now some of the keys are not working and led is always on
when i connect the phone to pc no COM port is showing it doesnt enter in boot mode as when i do it manually by *#7284# it shows cant find emchanger.exe
so is it possible to get my orginial version back by flashing it with original file.....
can anybody help me.......
Thnks in Advance
I'm a programmer but have no experience in Windows Mobile/CE programming before.
can anyone send me windows folder from healthy b7320 so that i can study and get u guys a solution.
Received my boost aquos crystal today. Was hoping to dfs it to page plus as easy as the moto g, but was unsuccessful. I was able to read all normal values using dfs, just not write.
Process:
Entered diag mode using ##diag#.
Installed sharp drivers. (I will attach).
Updated 306sh drivers using Device Manager in windows. Select driver "I know location" or whatever. Chose "show all drivers". Scroll to Sharp Corporation. Select USB diag driver.
Open in dfs. ( I got my Spc code from boost by registering my device on their website to my account. Don't worry, they dount make you pay. Choose your plan, create a new phone number or whatever needed. Doesn't matter... They call it MSL code.)
Entered Spc in dfs and was able to read all info.... But nothing I wrote saved.
In the phone's ##diag# screen, I'd I selected the serial option, I installed the drivers... Same results.
I also force installed my moto RAZR m xt907 drivers (also msm Qualcomm) but same results.
Hope this helps someone with something.
let me know if the link works https://docs.google.com/uc?id=0B2YrFGY95PiIeklOT1VVRU5QVGs&export=download
hemanolio said:
Received my boost aquos crystal today. Was hoping to dfs it to page plus as easy as the moto g, but was unsuccessful. I was able to read all normal values using dfs, just not write.
Process:
Entered diag mode using ##diag#.
Installed sharp drivers. (I will attach).
Updated 306sh drivers using Device Manager in windows. Select driver "I know location" or whatever. Chose "show all drivers". Scroll to Sharp Corporation. Select USB diag driver.
Open in dfs. ( I got my Spc code from boost by registering my device on their website to my account. Don't worry, they dount make you pay. Choose your plan, create a new phone number or whatever needed. Doesn't matter... They call it MSL code.)
Entered Spc in dfs and was able to read all info.... But nothing I wrote saved.
In the phone's ##diag# screen, I'd I selected the serial option, I installed the drivers... Same results.
I also force installed my moto RAZR m xt907 drivers (also msm Qualcomm) but same results.
Hope this helps someone with something.
let me know if the link works https://docs.google.com/uc?id=0B2YrFGY95PiIeklOT1VVRU5QVGs&export=download
Click to expand...
Click to collapse
can't download the files could you please send to me [email protected]
what is DFS ?
you may try msm drivers.
whynot4444 said:
what is DFS ?
Click to expand...
Click to collapse
cdma tools 。。。 now I need drive for 306 so i can connect 306 to DFS but I cant find the COM drive 。。。
cairui505 said:
cdma tools 。。。 now I need drive for 306 so i can connect 306 to DFS but I cant find the COM drive 。。。
Click to expand...
Click to collapse
oh, you need drive DIAG, but what do you want with this port?
Hey guys I just found this thread. I am a CDMA Programmer and I wouldn't mind tinkering with this phone. Did it come with stock drivers embedded in the phone? Most do or sometimes you need to get adb driver packs for it. I am willing to help as I have DFS, CDMA Workshop, QPST and more. Please lmk what the current progress is on your end and I'll go ahead and share what I find when the phone arrives at my house. Let's get this rollin again!
kalanir said:
Hey guys I just found this thread. I am a CDMA Programmer and I wouldn't mind tinkering with this phone. Did it come with stock drivers embedded in the phone? Most do or sometimes you need to get adb driver packs for it. I am willing to help as I have DFS, CDMA Workshop, QPST and more. Please lmk what the current progress is on your end and I'll go ahead and share what I find when the phone arrives at my house. Let's get this rollin again!
Click to expand...
Click to collapse
yes in sharp web page have stock drivers.. also your can search bcs I saw that one guy is share diag modem driver(also here have msl unlock guide) .. most big problem is that we don't have root and other is if you can seen that phone have gsm radio..
loonbg said:
yes in sharp web page have stock drivers.. also your can search bcs I saw that one guy is share diag modem driver(also here have msl unlock guide) .. most big problem is that we don't have root and other is if you can seen that phone have gsm radio..
Click to expand...
Click to collapse
Ok I just ordered a bad esn one from eBay. Is it easy to get the msl code for it aside from activation? That's gonna be a big pain the @$$ if it's not like the Samsung or HTC.
OK guys so I just got my Sharp Aquos today and I have to say, WHAT A PIECE OF ART!!!! But I have started to work on it now. Did have some issues with it but I got it working. Managed to get into a hidden menu to do a RTN reset of it and now trying to get Diag Drivers. I got my MSL courtesy of an hour of research that surly paid off. So next step: connection to CDMA Workshop! Let me know what drivers you have found that work for this for the coms.
kalanir said:
I have to say, WHAT A PIECE OF ART!!!!
Click to expand...
Click to collapse
you r 100% right
kalanir said:
Managed to get into a hidden menu to do a RTN reset of it
Click to expand...
Click to collapse
how?
kalanir said:
trying to get Diag Drivers.
Click to expand...
Click to collapse
please share
kalanir said:
I got my MSL courtesy of an hour of research that surly paid off
Click to expand...
Click to collapse
can u tell me how?
Okay so here is the issue I'm facing today. I bought a Sprint Galaxy S5, and I managed to unlock it for domestic use (AT&T). I cannot get an LTE connection because my Qualcomm processor does not have the appropriate bands to use ATT LTE's network.
I read on here that you can write your NV memory to write the firmware and enable these other bands using QPST and QXDM. The issue I'm having though is getting my computer to install the diagnostic driver for COM port. It reads the Modem under modem tab in device manager. Since the computer doesn't think there is a diagnostic port, QPST configuration cannot open a diag port which is what I need. I've been able to successfully put my phone in rndis + DM + modem by using this in emulator,
su
setprop sys.usb.confing_rndis,diag,diag_mdm
Do not type the first _ as it's meant as a space bar, but USE diag_mdm
But there is no indication that any driver has installed, and does not appear in device manager (even with hidden devices shown).
I'm running 6.0.1 CM13 w/twrp recovery with SELINUX set to permissive.
On windows 8
I also noticed that the guide to add frequency bands was written in 2014, I also know that in Lollipop, you needed to enable CP Logging to get it show up.
What I'm wondering is if there is a missing step to properly installing the diag driver, or if Qualcomm/Samsung found other means to activate it.
I noticed that when using EFSPro I can set it to Diagnostic + Modem + adb but I can only read not read/write NV memory
Also I observed when I send the SPC to read the phone with EFSPro, it says
"SPC was accepted by the phone!"
Then followed by.. "SPC was not found".
Then after I close that popup it reads my NV memory, but I can't write.
Is there a method to enable CP logging on CM13 MM and install the diag com port for QPST use? I don't have a stock recovery to enable CP logging through usual means in as I'm using TWRP.
Link to GUIDE
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Thanks in advance.
Sent from my SM-G900P using XDA-Developers mobile app
xHolomovementx said:
Okay so here is the issue I'm facing today. I bought a Sprint Galaxy S5, and I managed to unlock it for domestic use (AT&T). I cannot get an LTE connection because my Qualcomm processor does not have the appropriate bands to use ATT LTE's network.
I read on here that you can write your NV memory to write the firmware and enable these other bands using QPST and QXDM. The issue I'm having though is getting my computer to install the diagnostic driver for COM port. It reads the Modem under modem tab in device manager. Since the computer doesn't think there is a diagnostic port, QPST configuration cannot open a diag port which is what I need. I've been able to successfully put my phone in rndis + DM + modem by using this in emulator,
su
setprop sys.usb.confing_rndis,diag,diag_mdm
Do not type the first _ as it's meant as a space bar, but USE diag_mdm
But there is no indication that any driver has installed, and does not appear in device manager (even with hidden devices shown).
I'm running 6.0.1 CM13 w/twrp recovery with SELINUX set to permissive.
On windows 8
I also noticed that the guide to add frequency bands was written in 2014, I also know that in Lollipop, you needed to enable CP Logging to get it show up.
What I'm wondering is if there is a missing step to properly installing the diag driver, or if Qualcomm/Samsung found other means to activate it.
I noticed that when using EFSPro I can set it to Diagnostic + Modem + adb but I can only read not read/write NV memory
Also I observed when I send the SPC to read the phone with EFSPro, it says
"SPC was accepted by the phone!"
Then followed by.. "SPC was not found".
Then after I close that popup it reads my NV memory, but I can't write.
Is there a method to enable CP logging on CM13 MM and install the diag com port for QPST use? I don't have a stock recovery to enable CP logging through usual means in as I'm using TWRP.
Link to GUIDE
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Thanks in advance.
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
Did you ever solve this? I plan on following the same guide and I too am having this same problem.